Professional Documents
Culture Documents
Discontinued Product
These parts are no longer in production The device should not be
purchased for new design applications. Samples are no longer available.
Recommended Substitutions:
For new customers and applications:
Allegro MicroSystems, Inc. reserves the right to make, from time to time, revisions to the anticipated product life cycle plan for a
product to accommodate changes in production capabilities, alternative product availabilities, or market demand. The information
included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor
for any infringements of patents or other rights of third parties which may result from its use.
3141 THRU
Data Sheet
27621.6B*
3144
SENSITIVE HALL-EFFECT SWITCHES
FOR HIGH-TEMPERATURE OPERATION
These Hall-effect switches are monolithic integrated circuits with
tighter magnetic specifications, designed to operate continuously over
extended temperatures to +150C, and are more stable with both
temperature and supply voltage changes. The unipolar switching
characteristic makes these devices ideal for use with a simple bar or rod
X
magnet. The four basic devices (3141, 3142, 3143, and 3144) are
identical except for magnetic switch points.
Each device includes a voltage regulator for operation with supply
voltages of 4.5 to 24 volts, reverse battery protection diode, quadratic
V Hall-voltage generator, temperature compensation circuitry, small-
CC signal amplifier, Schmitt trigger, and an open-collector output to sink
up to 25 mA. With suitable output pull up, they can be used with
bipolar or CMOS logic circuits. The A3141 and A3142 are im-
1 2 3 proved replacements for the UGN/UGS3140; the A3144 is the
improved replacement for the UGN/UGS3120.
The first character of the part number suffix determines the device
operating temperature range. Suffix E is for the automotive and
GROUND
REG.
X 3 OUTPUT
2 GROUND
Dwg. FH-005-2
400 300
I OUT = 20 mA
V =8V V CC = 4.524 V
CC
300
SATURATION VOLTAGE IN mV
SWITCH POINT IN GAUSS
200
OPERATE POINT
200
100
RELEASE POINT
100
0 0
-50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150
8.0 VCC = 8 V
B B OP
SUPPLY CURRENT IN mA
SUPPLY CURRENT IN mA
6.0
B B OP
6.0
B B RP
4.0 5.0
2.0 T A = +25C
B B RP
4.0
0
0 5 10 15 20 25 -50 -25 0 25 50 75 100 125 150
SUPPLY VOLTAGE IN VOLTS AMBIENT TEMPERATURE IN C
Dwg. GH-041-1
Dwg. GH-039-1
* Complete part number includes a suffix denoting operating temperature range (E- or L-) and package type ( -LT, -U, or -UA).
www.allegromicro.com
3141 THRU 3144
SENSITIVE
HALL-EFFECT SWITCHES
FOR HIGH-TEMP. OPERATION
A 10
1 2 3
5.0
Dwg. MH-008-2D
Suffix UA
ACTIVE AREA DEPTH -5.0
0.0195" 0 5 10 15 20 25
0.082"
0.50 mm 2.07 mm SUPPLY VOLTAGE IN VOLTS
NOM
Dwg. GH-042-1
Allegro
0.055"
A 1.39 mm OPERATION
BRANDED
SURFACE 1 2 3
The output of these devices (pin 3) switches low when the magnetic field
at the Hall element exceeds the operate point threshold (BOP). At this point, the
output voltage is VOUT(SAT). When the magnetic field is reduced to below the
release point threshold (BRP), the device output goes high. The difference in
Dwg. MH-011-10A
the magnetic operate and release points is called the hysteresis (B hys) of the
device. This built-in hysteresis allows clean switching of the output even in
the presence of external mechanical vibration and electrical noise.
PACKAGE DESIGNATOR LT
(SOT89/TO-243AA)
0.0189 0.48
0.047 0.0142 1.20 0.36
0.035 0.0221 0.89 0.56
0.059 0.0173 1.50 0.44
BSC BSC
0.118 3.00
BSC Dwg. MA-009-3A in BSC Dwg. MA-009-3A mm
0.098 2.5
0.079 2.0
B 0.031 B 0.8
A 0.102 A 2.6
0.181 4.6
1 2 3 0.047 1 2 3 1.2
NOTES: 1. Exact body and lead configuration at vendors option within limits shown.
2. Supplied in bulk pack (500 pieces per bag) or add "TR" to part number for tape and reel.
3. Only low-temperature (240C) reflow-soldering techniques are recommended for SOT89 devices.
www.allegromicro.com
3141 THRU 3144
SENSITIVE
HALL-EFFECT SWITCHES
FOR HIGH-TEMP. OPERATION
PACKAGE DESIGNATOR UA
Dimensions in Inches Dimensions in Millimeters
(controlling dimensions) (for reference only)
0.164 4.17
0.159 4.04
0.062 1.57
45 0.058 45 1.47
0.122 3.10
0.117 2.97
45 45
0.050 1.27
BSC BSC
Dwg. MH-014E in Dwg. MH-014E mm
0.100"
(2.5 mm) Dwg. MH-026
www.allegromicro.com
3141 THRU 3144
SENSITIVE
HALL-EFFECT SWITCHES
FOR HIGH-TEMP. OPERATION