Professional Documents
Culture Documents
SAG - Mechatronics Servicing NC II PDF
SAG - Mechatronics Servicing NC II PDF
Can I? YES NO
Plan and prepare for installation according to job
requirements*
Interpret work instructions according to job requirements
and identifies the mechatronic devices to be installed*
Plan and prepare for configuration and testing according
to job requirements and identifies the mechatronic devices
for configuration*
Select and check the proper tools, equipment, & testing
devices needed*
Install mechatronic devices according to job requirements
Inspect the installed mechatronic devices and ensure
conformance to the technical requirements
Diagnose faults or problems on the mechatronic devices*
Configure and test the mechatronic devices according to
standard procedures*
Check the configured and tested mechatronic devices to
ensure normal operation and conformance with
manufacturers instruction and safety*
Follow mechatronic standards, and use PPE and OH&S
requirements
Perform 5S
Respond to unplanned events or conditions in
accordance with the established procedure
Prepare and complete necessary report*
Demonstrate understanding on mechatronic servicing
principles
I agree to undertake assessment in the knowledge that information gathered will
only be used for professional development purposes and can only be accessed by
concerned assessment personnel and my manager/supervisor.
ELCMEC206-1009 1
Mechatronic Servicing NC II