Professional Documents
Culture Documents
Catalog Edition
extract Decem-
LOGO! ber 2014
siemens.com/simatic
Siemens AG 2014
Related catalogs
SIMATIC ST 70 SIMATIC Ident ID 10
Products for Industrial Identification Systems
Totally Integrated Automation
E86060-K4670-A101-B4-7600 E86060-K8310-A101-A9-7600
E86060-K4670-A151-A7-7600 E86060-K6850-A101-C4
E86060-K6710-A101-B8-7600 E86060-D4001-A510-D4-7600
E86060-K4680-A101-C2-7600 www.siemens.com/industrymall
catalogs.industry@siemens.com
E86060-K4678-A111-B9-7600 (include the catalog name in the subject field)
SITOP KT 10.1
Power supply
SITOP
E86060-K2410-A111-A9-7600
SIMATIC
Siemens AG 2014
Appendix
2
Siemens AG 2014
Siemens is the world's leading supplier We consistently rely on integrated tech- Market launch times can be reduced
of innovative and environmentally nologies and, thanks to our bundled by up to 50% due to the combination
friendly products and solutions for in- portfolio, we can respond more quickly of powerful automation technology
dustrial companies. End-to-end auto- and flexibly to our customers' wishes. and industrial software from Siemens
mation technology and industrial soft- With our globally unmatched range of Industry. At the same time, the costs for
ware, solid market expertise, and automation technology, industrial energy or waste water for a manufac-
technology-based services are the le- control and drive technology as well turing company can be reduced signifi-
vers we use to increase our customers as industrial software, we equip compa- cantly. In this way, we increase our
productivity, efficiency and flexibility. nies with exactly what they need over customers competitive strength and
their entire value chain from product make an important contribution to envi-
design and development to production, ronmental protection with our energy-
sales and service. Our industrial custom- efficient products and solutions.
ers benefit from our comprehensive
portfolio, which is tailored to their
market and their needs.
(53 (QWHUSULVH5HVRXUFH3ODQQLQJ
(WKHUQHW
,QGXVWULDO(WKHUQHW
7,$3RUWDO
&RQWURO/HYHO
6,0$7,&3&6
6,180(5,. 6,027,21 6,0$7,&1(7 6,0$7,&&RQWUROOHU
6,0$7,&+0, 6,5,86,QGXVWULDO&RQWUROV
$XWRPDWLRQ
&RPSXWHU1XPHULF&RQWURO 0RWLRQ&RQWURO ,QGXVWULDO
0RGXODU3&%DVHG +XPDQ0DFKLQH,QWHUIDFH
6\VWHP
&RPPXQLFDWLRQ
)LHOG/HYHO
352),%863$
3URFHVV,QVWUXPHQWDWLRQ 6,0$7,&,GHQW
6,0$7,&'LVWULEXWHG,2 6,1$0,&6'ULYH6\VWHPV 6,7233RZHU6XSSO\
,QGXVWULDO,GHQWLILFDWLRQ
Efficient engineering is the first step toward better production that is faster,
more flexible, and more intelligent. With all components interacting efficiently,
Totally Integrated Automation (TIA) delivers enormous time savings right from
greater flexibility.
Integrated engineering
Consistent, comprehensive engineering throughout the
entire product development and production process
Industrial data management
Access to all important data occurring in productive
operation along the entire value chain and across
all levels
352),1(7 Industrial communication
,QGXVWULDO(WKHUQHW
Integrated communication based on international
352),%86
cross-vendor standards that are mutually compatible
$6,QWHUIDFH
Industrial security
.1;*$00$LQVWDEXV
Systematic minimization of the risk of an internal or
7RWDOO\ external attack on plants and networks
,QWHJUDWHG
3RZHU Safety Integrated
Reliable protection of personnel, machinery, and the
environment thanks to seamless integration of safety
technologies into the standard automation
Smart interfaces allow linking to industrial or building automation, making it possible to fully
exploit all the optimization potential of an integrated solution. This is how we provide our
customers around the world with answers to their challenges. With highly efficient, reliable,
and safe power distribution, we lay the foundation for sustainable infrastructure and cities,
Comprehensive answers for
power distribution in complex buildings, and industrial plants. We bring power to the point wherever and whenever it is
energy systems from Siemens needed.
Electrification
Renewables
110 kV
1/2 Introduction
1/34 LOGO!Power
1/45 LOGO!Contact
1/2 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Overview
1
The space-saving basic variants
Interface for the connection of expansion modules, up to 24
digital inputs, 20 (16) digital outputs, 8 analog inputs and 8 (2)
analog outputs can be addressed
With connection option for LOGO! TD text display (can be
connected to all LOGO! 0BA6 and 0BA7 basic versions);
LOGO! TDE can be connected with LOGO! 8 or higher
New for LOGO! 8
All basic units with integrated web server
Same enclosure width as LOGO! 0BA6 (4 MW)
All basic units with Ethernet interface for communication with
LOGO!, SIMATIC Controllers, SIMATIC Panels and PCs
Use of standard micro CF cards
LOGO! 0BA7 versions:
Ethernet interface for communication with SIMATIC Controller,
SIMATIC Panel and PC
Networking of max. 8 LOGO! devices
Use of standard CF card or SIMATIC memory card
Technical specifications
6ED1 052-1CC01-0BA8 6ED1 052-1MD00-0BA8 6ED1 052-1HB00-0BA8 6ED1 052-1FB00-0BA8
Installation type/mounting
Mounting on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing
units wide units wide units wide units wide
Supply voltage
12 V DC Yes
24 V DC Yes Yes Yes
115 V DC Yes
230 V DC Yes
permissible range, lower limit 20.4 V 10.8 V 20.4 V 100 V
(DC)
permissible range, upper limit 28.8 V 28.8 V 28.8 V 253 V
(DC)
24 V AC Yes
115 V AC Yes
230 V AC Yes
Time of day
Time switching clocks
Power reserve 480 h 480 h 480 h 480 h
Digital inputs
Number of digital inputs 8; Of which 4 can be used in 8; Of which 4 can be used in 8 8
analog mode (0 to 10 V) analog mode (0 to 10 V)
Digital outputs
Number of digital outputs 4; Transistor 4; Relays 4; Relays 4; Relays
short-circuit protection Yes; electrical (1 A) No; external fusing necessary No; external fusing necessary No; external fusing necessary
Output current
for signal "1" permissible 0.3 A 10 A
range for 0 to 55 C, max.
Relay outputs
Switching capacity of con-
tacts
- with inductive load, max. 3A 3A 3A
- with resistive load, max. 10 A 10 A 10 A
EMC
Emission of radio interference
acc. to EN 55 011
Limit class B, for use in resi- Yes; Radio interference sup- Yes Yes Yes
dential areas pression according to
EN55011, Limit Value Class B
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/3
Siemens AG 2014
6ED1052-1MD00-0BA7 6ED1052-1FB00-0BA7
Installation type/mounting
Mounting on 35mm DIN rail, 6 spacing units wide on 35mm DIN rail, 6 spacing units wide
Supply voltage
12 V DC Yes
24 V DC Yes
115 V DC Yes
230 V DC Yes
permissible range, lower limit (DC) 10.8 V 100 V
permissible range, upper limit (DC) 28.8 V 253 V
115 V AC Yes
230 V AC Yes
Time of day
Time switching clocks
Power reserve 480 h 480 h
Digital inputs
Number of digital inputs 8; Of which 4 can be used in analog mode 8
(0 to 10 V)
Digital outputs
Number of digital outputs 4; Relays 4; Relays
short-circuit protection No; external fusing necessary No; external fusing necessary
Relay outputs
Switching capacity of contacts
- with inductive load, max. 3A 3A
- with resistive load, max. 10 A 10 A
EMC
Emission of radio interference acc. to EN 55 011
Limit class B, for use in residential areas Yes; Radio interference suppression according to Yes; Radio interference suppression according to
EN55011, Limit Value Class B EN55011, Limit Value Class B
Degree and class of protection
IP20 Yes Yes
Standards, approvals, certificates
CSA approval Yes Yes
UL approval Yes Yes
FM approval Yes Yes
1/4 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/5
Siemens AG 2014
1/6 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! 8 230V Starter Kit 6ED1057-3BA02-0AA8 Upgrade from V1.0 to V8.0; on DVD
4-line text display, can be con- Adapter cable for analog modem
nected to all LOGO! 0BA6 Basic communication
and Pure versions, including con- Front panel mounting set
necting cable
Width 4 width units 6AG1057-1AA00-0AA0
SIPLUS LOGO! TD text display 6AG1055-4MH00-2BA0
Width 4 width units, with keys 6AG1057-1AA00-0AA3
(extended temperature range -10 ...
+60 C and medial loading) Width 8 width units 6AG1057-1AA00-0AA1
4-line text display, can be con- Width 8 width units, with keys 6AG1057-1AA00-0AA2
nected to all LOGO! Basic and Pure
versions as of -0BA6, including
connecting cable
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/7
Siemens AG 2014
Technical specifications
6AG1052-1CC01-2BA6 6AG1052-1MD00-2BA6 6AG1052-1HB00-2BA6 6AG1052-1FB00-2BA6
based on 6ED1052-1CC01-0BA6 6ED1052-1MD00-0BA6 6ED1052-1HB00-0BA6 6ED1052-1FB00-0BA6
Ambient conditions
Operating temperature
Min. -25 C; = Tmin -25 C; = Tmin -25 C; = Tmin -25 C; = Tmin
max. 70 C; = Tmax; 70 C; = Tmax; 70 C; = Tmax; 70 C; = Tmax;
55 C @ UL/cUL use 55 C @ UL/cUL use 55 C @ UL/cUL use 55 C @ UL/cUL use
Extended ambient conditions
Relative to ambient tempera- Tmin ... Tmax at Tmin ... Tmax at Tmin ... Tmax at Tmin ... Tmax at
ture-atmospheric pressure-in- 1080 hPa ... 795 hPa 1080 hPa ... 795 hPa 1080 hPa ... 795 hPa 1080 hPa ... 795 hPa
stallation altitude (-1000 m ... +2000 m) // (-1000 m ... +2000 m) // (-1000 m ... +2000 m) // (-1000 m ... +2000 m)
Tmin ... (Tmax - 10K) at Tmin ... (Tmax - 10K) at Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa 795 hPa ... 658 hPa 795 hPa ... 658 hPa
(+2000 m ... +3500 m) // (+2000 m ... +3500 m) // (+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at Tmin ... (Tmax - 20K) at Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa 658 hPa ... 540 hPa 658 hPa ... 540 hPa
(+3500 m ... +5000 m) (+3500 m ... +5000 m) (+3500 m ... +5000 m)
Relative humidity
- with condensation, maxi- 100 %; Relative humidity, 100 %; Relative humidity, 100 %; Relative humidity, 100 %; Relative humidity,
mum incl. condensation / frost incl. condensation / frost incl. condensation / frost incl. condensation / frost
permitted (no commissioning permitted (no commissioning permitted (no commissioning permitted (no commissioning
under condensation condi- under condensation condi- under condensation condi- under condensation condi-
tions) tions) tions) tions)
Resistance
- against biologically active Yes; Class 3B2 mold, fungus Yes; Class 3B2 mold, fungus Yes; Class 3B2 mold, fungus Yes; Class 3B2 mold, fungus
substances and dry rot spores (with the and dry rot spores (with the and dry rot spores (with the and dry rot spores (with the
exception of fauna). exception of fauna). exception of fauna). exception of fauna).
The supplied connector cov- The supplied connector cov- The supplied connector cov- The supplied connector cov-
ers must remain on the unused ers must remain on the unused ers must remain on the unused ers must remain on the unused
interfaces during operation! interfaces during operation! interfaces during operation! interfaces during operation!
- against chemically active Yes; Class 3C4 incl. salt spray. Yes; Class 3C4 incl. salt spray. Yes; Class 3C4 incl. salt spray. Yes; Class 3C4 incl. salt spray.
substances The supplied connector cov- The supplied connector cov- The supplied connector cov- The supplied connector cov-
ers must remain on the unused ers must remain on the unused ers must remain on the unused ers must remain on the unused
interfaces during operation! interfaces during operation! interfaces during operation! interfaces during operation!
- against mechanically active Yes; Class 3S4 incl. sand, Yes; Class 3S4 incl. sand, Yes; Class 3S4 incl. sand, Yes; Class 3S4 incl. sand,
substances dust. The supplied connector dust. The supplied connector dust. The supplied connector dust. The supplied connector
covers must remain on the covers must remain on the covers must remain on the covers must remain on the
unused interfaces during unused interfaces during unused interfaces during unused interfaces during
operation! operation! operation! operation!
1/8 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Extended temperature range and 6AG1052-1FB00-2BA7 Further accessories See LOGO! modular basic
exposure to media versions, page 1/7
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/9
Siemens AG 2014
Technical specifications
6ED1052-2CC01-0BA8 6ED1052-2MD00-0BA8 6ED1052-2HB00-0BA8 6ED1052-2FB00-0BA8
Installation type/mounting
Mounting on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing
units wide units wide units wide units wide
Supply voltage
12 V DC Yes
24 V DC Yes Yes Yes
115 V DC Yes
230 V DC Yes
permissible range, lower limit 20.4 V 10.8 V 20.4 V 100 V
(DC)
permissible range, upper limit 28.8 V 28.8 V 28.8 V 253 V
(DC)
24 V AC Yes
115 V AC Yes
230 V AC Yes
Time of day
Time switching clocks
Number 190 8 8 8
Power reserve 480 h 480 h 480 h 480 h
Digital inputs
Number of digital inputs 8; Of which 4 can be used in 8; Of which 4 can be used in 8 8
analog mode (0 to 10 V) analog mode (0 to 10 V)
Digital outputs
Number of digital outputs 4; Transistor 4; Relays 4; Relays 4; Relays
short-circuit protection Yes; electrical (1 A) No; external fusing necessary No; external fusing necessary No; external fusing necessary
Output current
for signal "1" permissible 0.3 A 10 A
range for 0 to 55 C, max.
Relay outputs
Switching capacity of con-
tacts
- with inductive load, max. 3A 3A 3A
- with resistive load, max. 10 A 10 A 10 A
EMC
Emission of radio interference
acc. to EN 55 011
Limit class B, for use in resi- Yes; Radio interference Yes Yes Yes
dential areas suppression according to
EN55011, Limit Value Class B
1/10 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/11
Siemens AG 2014
1/12 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! 8 230V Starter Kit 6ED1057-3BA02-0AA8 Upgrade from V1.0 to V8, on DVD
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/13
Siemens AG 2014
Technical specifications
6AG1052-2CC01-2BA6 6AG1052-2MD00-2BA6 6AG1052-2HB00-2BA6 6AG1052-2FB00-2BA6
based on 6ED1052-2CC01-0BA6 6ED1052-2MD00-0BA6 6ED1052-2HB00-0BA6 6ED1052-2FB00-0BA6
Ambient conditions
Operating temperature
Min. -40 C; = Tmin -40 C; = Tmin -40 C; = Tmin -40 C; = Tmin
max. 70 C; = Tmax; 70 C; = Tmax; 70 C; = Tmax; 70 C; = Tmax;
55 C @ UL/cUL use 55 C @ UL/cUL use 55 C @ UL/cUL use 55 C @ UL/cUL use
Extended ambient conditions
Relative to ambient tempera- Tmin ... Tmax at Tmin ... Tmax at Tmin ... Tmax at Tmin ... Tmax at
ture-atmospheric pressure-in- 1080 hPa ... 795 hPa 1080 hPa ... 795 hPa 1080 hPa ... 795 hPa 1080 hPa ... 795 hPa
stallation altitude (-1000 m ... +2000 m) // (-1000 m ... +2000 m) // (-1000 m ... +2000 m) // (-1000 m ... +2000 m)
Tmin ... (Tmax - 10K) at Tmin ... (Tmax - 10K) at Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa 795 hPa ... 658 hPa 795 hPa ... 658 hPa
(+2000 m ... +3500 m) // (+2000 m ... +3500 m) // (+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at Tmin ... (Tmax - 20K) at Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa 658 hPa ... 540 hPa 658 hPa ... 540 hPa
(+3500 m ... +5000 m) (+3500 m ... +5000 m) (+3500 m ... +5000 m)
Relative humidity
- with condensation, 100 %; Relative humidity, incl. 100 %; Relative humidity, incl. 100 %; Relative humidity, incl. 100 %; Relative humidity, incl.
maximum condensation / frost permitted condensation / frost permitted condensation / frost permitted condensation / frost permitted
(no commissioning under con- (no commissioning under con- (no commissioning under con- (no commissioning under con-
densation conditions) densation conditions) densation conditions) densation conditions)
Resistance
- against biologically active Yes; Class 3B2 mold, fungus Yes; Class 3B2 mold, fungus Yes; Class 3B2 mold, fungus Yes; Class 3B2 mold, fungus
substances and dry rot spores (with the and dry rot spores (with the and dry rot spores (with the and dry rot spores (with the
exception of fauna). The sup- exception of fauna). The sup- exception of fauna). The sup- exception of fauna). The sup-
plied connector covers must plied connector covers must plied connector covers must plied connector covers must
remain on the unused inter- remain on the unused inter- remain on the unused inter- remain on the unused inter-
faces during operation! faces during operation! faces during operation! faces during operation!
- against chemically active Yes; Class 3C4 incl. salt spray. Yes; Class 3C4 incl. salt spray. Yes; Class 3C4 incl. salt spray. Yes; Class 3C4 incl. salt spray.
substances The supplied connector cov- The supplied connector cov- The supplied connector cov- The supplied connector cov-
ers must remain on the unused ers must remain on the unused ers must remain on the unused ers must remain on the unused
interfaces during operation! interfaces during operation! interfaces during operation! interfaces during operation!
- against mechanically active Yes; Class 3S4 incl. sand, Yes; Class 3S4 incl. sand, Yes; Class 3S4 incl. sand, Yes; Class 3S4 incl. sand,
substances dust. The supplied connector dust. The supplied connector dust. The supplied connector dust. The supplied connector
covers must remain on the covers must remain on the covers must remain on the covers must remain on the
unused interfaces during unused interfaces during unused interfaces during unused interfaces during
operation! operation! operation! operation!
1/14 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/15
Siemens AG 2014
Technical specifications
6ED1055-1CB00-0BA2 6ED1055-1HB00-0BA2 6ED1055-1MB00-0BA2 6ED1055-1FB00-0BA2
Installation type/mounting
Mounting on 35 mm DIN rail, on 35 mm DIN rail, on 35 mm DIN rail, on 35 mm DIN rail,
2 spacing units wide 2 spacing units wide 2 spacing units wide 2 spacing units wide
Supply voltage
12 V DC Yes
24 V DC Yes Yes Yes
115 V DC Yes
230 V DC Yes
permissible range, lower limit (DC) 20.4 V 20.4 V 10.8 V 100 V
permissible range, upper limit (DC) 28.8 V 28.8 V 28.8 V 253 V
24 V AC Yes
115 V AC Yes
230 V AC Yes
Line frequency
permissible frequency range, 63 Hz 63 Hz
upper limit
Digital inputs
Number of digital inputs 4 4 4 4
Input voltage
Type of input voltage DC AC/DC DC AC/DC
for signal "0" < 5 V DC < 5 V DC < 40 V AC; < 30 V DC
for signal "1" > 12 V DC > 79 V AC, > 79 V DC
Input current
for signal "0", max. (permissible quies- 0.88 mA 1.1 mA 0.88 mA 0.06 mA
cent current)
for signal "1", typ. 4 mA 5.5 mA 4.2 mA 0.37 mA
Input delay (for rated value of input
voltage)
for standard inputs
- at "0" to "1", max. 1.5 ms 1.5 ms 1.5 ms 40 ms
- at "1" to "0", max. 1.5 ms 15 ms 1.5 ms 75 ms
Digital outputs
Number of digital outputs 4 4; Relays 4; Relays 4; Relays
short-circuit protection Yes No No No
Controlling a digital input Yes Yes Yes
Switching capacity of the outputs
Lamp load, max. 1 000 W 1 000 W 1 000 W; 500 W at 115 V AC
Parallel switching of 2 outputs
for increased power No No No No
1/16 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/17
Siemens AG 2014
6ED1055-1MA00-0BA2 6ED1055-1MD00-0BA2
Installation type/mounting
Mounting on 35 mm DIN rail, 2 spacing units wide on 35 mm DIN rail, 2 spacing units wide
Supply voltage
12 V DC Yes; 10.8V DC to 28.8V DC Yes; 10.8V DC to 28.8V DC
24 V DC Yes; 10.8V DC to 28.8V DC Yes; 10.8V DC to 28.8V DC
Analog inputs
Number of analog inputs 2 2; 2 or 3 wire connection
Input ranges
Voltage Yes No
Current Yes No
Resistance thermometer No Yes; For PT100/PT1000 sensors
Input ranges (rated values), voltages
0 to +10 V Yes No
1/18 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
6ED1055-1MM00-0BA2 6ED1055-1MM00-0BA2
Installation type/mounting Standards, approvals, certificates
Mounting on 35 mm DIN rail, CSA approval Yes
2 spacing units wide
UL approval Yes
Supply voltage
FM approval Yes
12 V DC No
Developed in accordance with Yes
24 V DC Yes IEC 61131
Analog outputs according to VDE 0631 Yes
Number of analog outputs 2
Marine approval
Output ranges, voltage Marine approval Yes
0 to 10 V Yes
Ambient conditions
EMC Operating temperature
Emission of radio interference acc. to Min. 0 C
EN 55 011
max. 55 C
Limit class B, for use in residential Yes
areas Dimensions
Degree and class of protection Width 35.5 mm
IP20 Yes Height 90 mm
Depth 58 mm
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/19
Siemens AG 2014
1/20 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/21
Siemens AG 2014
6ED1055-1MA00-0BA0 6ED1055-1MD00-0BA1
Installation type/mounting
Mounting on 35 mm DIN rail, 2 spacing units wide
Supply voltage
12 V DC Yes Yes; 10.8V DC to 28.8V DC
24 V DC Yes Yes; 10.8V DC to 28.8V DC
Analog inputs
Number of analog inputs 2 2; 2 or 3 wire connection
Input ranges
Voltage Yes No
Current Yes No
Resistance thermometer No Yes; For PT100/PT1000 sensors
Input ranges (rated values), voltages
0 to +10 V Yes
Input ranges (rated values), currents
0 to 20 mA Yes
EMC
Emission of radio interference acc. to
EN 55 011
Limit class B, for use in residential Yes Yes; Radio interference suppression according to
areas EN55011, Limit Value Class B
Degree and class of protection
IP20 Yes Yes
Standards, approvals, certificates
CSA approval Yes Yes; C22.2 Number 142
UL approval Yes Yes; UL 508
FM approval Yes Yes; FM-Standards No. 3611, 3600, 3810 Class I, Division
2, Group A, B, C, D
Developed in accordance with Yes Yes; EN 61131-2 (IEC 1131-2)
IEC 61131
according to VDE 0631 Yes
Marine approval
Marine approval Yes Yes; ABS, BV, DNV, GL, LRS, Class NK
Ambient conditions
Operating temperature
Min. 0 C 0 C
max. 55 C 55 C
Dimensions
Width 36 mm 36 mm
Height 90 mm 90 mm
Depth 55 mm 53 mm
1/22 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/23
Siemens AG 2014
1/24 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Overview
1
Expansion modules for connection to LOGO! Modular
With digital inputs and outputs, analog inputs, or analog
outputs
Note:
SIPLUS extreme products are based on Siemens Industry stan-
dard products. The contents listed here were taken from the re-
spective standard products. SIPLUS extreme-specific informa-
tion was added.
Technical specifications
6AG1055-1CB00-2BY0 6AG1055-1PB00-2BY0 6AG1055-1HB00-2BY0 6AG1055-1MB00-2BY1
Based on 6ED1055-1CB00-0BA0 6ED1055-1PB00-0BA0 6ED1055-1HB00-0BA0 6ED1055-1MB00-0BA1
Ambient conditions
Operating temperature
Min. -40 C; = Tmin -40 C; = Tmin -40 C; = Tmin -40 C; = Tmin
max. 70 C; = Tmax; 70 C; = Tmax; 70 C; = Tmax; 70 C; = Tmax;
55 C @ UL/cUL use 55 C @ UL/cUL use 55 C @ UL/cUL use 55 C @ UL/cUL use
Extended ambient conditions
Relative to ambient temperature-atmo- Tmin ... Tmax at Tmin ... Tmax at Tmin ... Tmax at Tmin ... Tmax at
spheric pressure-installation altitude 1080 hPa ... 795 hPa 1080 hPa ... 795 hPa 1080 hPa ... 795 hPa 1080 hPa ... 795 hPa
(-1000 m ... +2000 m) // (-1000 m ... +2000 m) // (-1000 m ... +2000 m) // (-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at Tmin ... (Tmax - 10K) at Tmin ... (Tmax - 10K) at Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa 795 hPa ... 658 hPa 795 hPa ... 658 hPa 795 hPa ... 658 hPa
(+2000 m ... +3500 m) // (+2000 m ... +3500 m) // (+2000 m ... +3500 m) // (+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at Tmin ... (Tmax - 20K) at Tmin ... (Tmax - 20K) at Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa 658 hPa ... 540 hPa 658 hPa ... 540 hPa 658 hPa ... 540 hPa
(+3500 m ... +5000 m) (+3500 m ... +5000 m) (+3500 m ... +5000 m) (+3500 m ... +5000 m)
Relative humidity
- with condensation, maximum 100 %; Relative humidity, 100 %; Relative humidity, 100 %; Relative humidity, 100 %; Relative humidity,
incl. condensation / frost incl. condensation / frost incl. condensation / frost incl. condensation / frost
permitted (no commission- permitted (no commission- permitted (no commission- permitted (no commission-
ing under condensation ing under condensation ing under condensation ing under condensation
conditions) conditions) conditions) conditions)
Resistance
- against biologically active Yes; Class 3B2 mold, fungus Yes; Class 3B2 mold, fungus Yes; Class 3B2 mold, fungus Yes; Class 3B2 mold, fungus
substances and dry rot spores (with the and dry rot spores (with the and dry rot spores (with the and dry rot spores (with the
exception of fauna). The exception of fauna). The exception of fauna). The exception of fauna). The
supplied connector covers supplied connector covers supplied connector covers supplied connector covers
must remain on the unused must remain on the unused must remain on the unused must remain on the unused
interfaces during operation! interfaces during operation! interfaces during operation! interfaces during operation!
- against chemically active Yes; Class 3C4 incl. salt Yes; Class 3C4 incl. salt Yes; Class 3C4 incl. salt Yes; Class 3C4 incl. salt
substances spray. The supplied connec- spray. The supplied connec- spray. The supplied connec- spray. The supplied connec-
tor covers must remain on tor covers must remain on tor covers must remain on tor covers must remain on
the unused interfaces dur- the unused interfaces dur- the unused interfaces dur- the unused interfaces dur-
ing operation! ing operation! ing operation! ing operation!
- against mechanically active Yes; Class 3S4 incl. sand, Yes; Class 3S4 incl. sand, Yes; Class 3S4 incl. sand, Yes; Class 3S4 incl. sand,
substances dust. The supplied connec- dust. The supplied connec- dust. The supplied connec- dust. The supplied connec-
tor covers must remain on tor covers must remain on tor covers must remain on tor covers must remain on
the unused interfaces dur- the unused interfaces dur- the unused interfaces dur- the unused interfaces dur-
ing operation! ing operation! ing operation! ing operation!
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/25
Siemens AG 2014
6AG1055-1MA00-2BY0 6ED1055-1MM00-2BY1
Based on 6ED1055-1MA00-0BA0 Based on 6ED1055-1MM00-0BA1
Ambient conditions Ambient conditions
Operating temperature Operating temperature
Min. -40 C; = Tmin Min. -40 C; = Tmin
max. 70 C; = Tmax; 55 C @ UL/cUL use max. 70 C; = Tmax; 55 C @ UL/cUL use
Extended ambient conditions Extended ambient conditions
Relative to ambient temperature-at- Tmin ... Tmax at 1080 hPa ... 795 hPa Relative to ambient temperature-at- Tmin ... Tmax at 1080 hPa ... 795 hPa
mospheric pressure-installation alti- (-1000 m ... +2000 m) // mospheric pressure-installation alti- (-1000 m ... +2000 m) //
tude Tmin ... (Tmax - 10K) at tude Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa 795 hPa ... 658 hPa
(+2000 m ... +3500 m) // (+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa 658 hPa ... 540 hPa
(+3500 m ... +5000 m) (+3500 m ... +5000 m)
Relative humidity Relative humidity
- with condensation, maximum 100 %; Relative humidity, incl. con- - with condensation, maximum 100 %; Relative humidity, incl. con-
densation / frost permitted (no com- densation / frost permitted (no com-
missioning under condensation missioning under condensation
conditions) conditions)
Resistance Resistance
- against biologically active sub- Yes; Class 3B2 mold, fungus and dry - against biologically active sub- Yes; Class 3B2 mold, fungus and dry
stances rot spores (with the exception of stances rot spores (with the exception of
fauna). The supplied connector cov- fauna). The supplied connector cov-
ers must remain on the unused inter- ers must remain on the unused inter-
faces during operation! faces during operation!
- against chemically active sub- Yes; Class 3C4 incl. salt spray. The - against chemically active sub- Yes; Class 3C4 incl. salt spray. The
stances supplied connector covers must stances supplied connector covers must
remain on the unused interfaces dur- remain on the unused interfaces dur-
ing operation! ing operation!
- against mechanically active sub- Yes; Class 3S4 incl. sand, dust. The - against mechanically active sub- Yes; Class 3S4 incl. sand, dust. The
stances supplied connector covers must stances supplied connector covers must
remain on the unused interfaces dur- remain on the unused interfaces dur-
ing operation! ing operation!
1/26 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/27
Siemens AG 2014
1/28 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Overview
1
The module is used to connect a LOGO! and up to three other
nodes to an Industrial Ethernet network with 10/100 Mbit/s in an
electrical linear, tree or star topology.
The essential features of the LOGO! CSM are:
Unmanaged 4-port switch, of which one port is on the front for
easy diagnostics access
Two versions for the voltage ranges 12/24 V DC or 230 V AC/
DC
Problem-free connection using four RJ45 standard
connectors
Space-saving, optimized for connection to LOGO!
Low-cost solution for implementing small, local Ethernet
networks
Stand-alone use for networking any Ethernet devices
Technical specifications
Article No. 6GK7 177-1FA10-0AA0 6GK7 177-1MA20-0AA0
Product-type designation LOGO! CSM 230 LOGO! CSM 12/24
Transmission rate
Transfer rate 1 10 Mbit/s 10 Mbit/s
Transfer rate 2 100 Mbit/s 100 Mbit/s
Interfaces
Number of electrical/optical connections for network 4 4
components or terminal equipment maximum
Number of electrical connections
for network components and terminal equipment 4 4
for signaling contact - -
for power supply 1 1
Design of electrical connection
for network components and terminal equipment RJ45 port / 1 connection on front of module RJ45 port / 1 connection on front of module
for signaling contact - -
for power supply 3-pole terminal block 3-pole terminal block
Supply voltage, current consumption, power loss
Type of supply voltage AC/DC 115...240 V DC 12/24 V
Supply voltage external 230 V 24 V
minimum 100 V 10.2 V
maximum 240 V 30.2 V
Product component fusing at power supply input Yes Yes
Type of fusing at input for supply voltage - -
Consumed current maximum 0.02 A 0.15 A
Active power loss at 24 V for DC - 1.5 W
Permitted ambient conditions
Ambient temperature
during operating 0 55 C 0 55 C
during storage -40 C 70 C -40 C 70 C
during transport -40 C 70 C -40 C 70 C
Relative humidity at 25 C without condensation 90 % 90 %
during operating maximum
Protection class IP IP20 IP20
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/29
Siemens AG 2014
1/30 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Sending a text message can be initiated by events in the LOGO! ANT896-4ME 6GK5896-4ME00-0AA0
Cylinder-shaped antenna for
basic module as well as by the two digital alarm inputs of the remote installation, e.g. on a control
LOGO! CMR. The values in the LOGO! basic module can be di- cabinet; N-Connect female connec-
rectly influenced by receiving a text message. tor
The two digital outputs can also be switched remotely by incom- GPS antenna
ing text messages/emails. ANT895-6ML 6GK5895-6ML00-0AA0
GPS/Glonass antenna for remote
LOGO! CMR determines the current position of the module installation indoor and outdoor,
based on the GPS signal received by the GPS antenna. In addi- magnet or screw mounting,
tion, LOGO! BM can be time-synchronized by means of the time 30cm cable with N-Connect female
included in the GPS signal. connector
Determining the time by means of an NTP server or from the data Antenna adapter cable
of the mobile network provider, offers more options for synchro- N-Connect/SMA male/male
nization of the LOGO! BM with the current time of day. Flexible Connection Cable,
pre-fabricated, connection cable;
Product version: suitable for 0 ... 6 GHz, IP68
LOGO! CMR2020 for use in GSM/GPRS mobile networks 0.3 m 6XV1875-5LE30
1m 6XV1875-5LH10
Warning! The country-specific mobile network approvals must 2m 6XV1875-5LH20
be observed: 5m 6XV1875-5LH50
DE: www.siemens.de/mobilfunkzulassungen IWLAN RCoax/antenna
N-Connect male/male
EN: www.siemens.com/mobilenetwork-approvals Flexible connection cable
Flexible connecting cable for con-
necting an RCoax cable or antenna
to a SCALANCE W-700 access
point with N-Connect connections;
pre-assembled with two N-Connect
male connections;
suitable from 0 ... 6 GHz, IP68
1m 6XV1875-5AH10
2m 6XV1875-5AH20
5m 6XV1875-5AH50
10 m 6XV1875-5AN10
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/31
Siemens AG 2014
1/32 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/33
Siemens AG 2014
Technical specifications
Article No. 6EP1311-1SH03 6EP1311-1SH13
Technical specifications
Product LOGO!Power LOGO!Power
Power supply, type 5 V/3 A 5 V/6.3 A
Input
Input 1-phase AC or DC 1-phase AC or DC
Rated voltage value Vin rated 100 240 V 100 240 V
Voltage range AC 85 264 V 85 264 V
Input voltage at DC 110 300 V 110 300 V
Overvoltage resistance 2.3 Vin rated, 1.3 ms 2.3 Vin rated, 1.3 ms
Mains buffering at Iout rated, min. 40 ms 40 ms
Mains buffering at Vin = 187 V at Vin = 187 V
Rated line frequency
1 50 Hz 50 Hz
2 60 Hz 60 Hz
Rated line range 47 63 Hz 47 63 Hz
Input current
at nominal level of the input voltage 120 V nominal 0.36 A 0.71 A
value
at nominal level of the input voltage 230 V nominal 0.22 A 0.37 A
value
Switch-on current limiting (+25 C), max. 26 A 50 A
It, max. 0.8 As 3 As
Built-in incoming fuse internal internal
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 16 A Recommended miniature circuit breaker: from 16 A
characteristic B or from 10 A characteristic C characteristic B or from 10 A characteristic C
1/34 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/35
Siemens AG 2014
1/36 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/37
Siemens AG 2014
1/38 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/39
Siemens AG 2014
1/40 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/41
Siemens AG 2014
1/42 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
More information
In addition to various power supply product lines, the perfectly You can find more information in Catalog KT 10.1 and in the
coordinated complete SITOP range offers a unique range of Internet at
add-on modules with which the 24 V power supply can be addi- www.siemens.com/sitop
tionally protected against interference on the primary and sec-
ondary side right up to all-round protection: Select the appropriate power supply quickly and easily with the
SITOP Selection Tool:
Redundancy module for setting up a redundant power supply www.siemens.com/sitop-selection-tool
Uninterruptible 24 V power supplies with batteries or
maintenace-free capacitors for continued operation in the
event of power failure
Selectivity modules for electronic protection of 24 V branches
from overload and short-circuit
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/43
Siemens AG 2014
1/44 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
LOGO!Contact
Switching module for direct switch-
ing of resistive loads up to 20 A and
motors up to 4 kW
Switching voltage 24 V 6ED1057-4CA00-0AA0
Switching voltage 230 V 6ED1057-4EA00-0AA0
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/45
Siemens AG 2014
1/46 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
SIPLUS upmiters
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 1/47
Siemens AG 2014
Notes
1
1/48 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
2
Siemens AG 2014
Appendix
2/6 Partner
2/6 Siemens contacts worldwide
2/7 Siemens Partner Program
Appendix
Siemens Industry Training
Contact
Visit our site on the Internet at:
www.siemens.com/sitrain
or let us advise you personally.
Siemens Industry Training Customer Support Germany:
Phone: +49 911 895-7575
Fax: +49 911 895-7576
E-Mail: info@sitrain.com
2/2 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Appendix
Additional Documentation
SIMATIC Manual Collection
Manuals that are not yet available in all 5 languages will at least
Overview be included in English and German.
The SIMATIC manual collection brings together the manuals of There is an update contract for the SIMATIC Manual Collection
Totally Integrated Automation in the smallest possible package. that encompasses supply of the up-to-date collection and three
It is eminently suitable for startup and service, replaces the subsequent updates which is valid for one year. If the update
space-consuming paper version in the office and provides fast contract is not cancelled, it is automatically extended and the list
access to the information. price will be charged to the customer.
The manual collection contains manuals in 5 languages for
LOGO! Ordering data Article No.
SIMADYN SIMATIC Manual Collection 6ES7998-8XC01-8YE0
SIMATIC bus components
SIMATIC C7
Electronic manuals on DVD,
multilingual: 2
LOGO!, SIMADYN, SIMATIC Bus
SIMATIC Distributed I/O components, SIMATIC C7,
SIMATIC HMI SIMATIC Distributed IO,
SIMATIC HMI, SIMATIC Sensors,
SIMATIC Sensors SIMATIC NET, SIMATIC PC Based
SIMATIC NET Automation, SIMATIC PCS 7,
SIMATIC PG/PC, SIMATIC S7,
SIMATIC PC Based Automation SIMATIC Software, SIMATIC TDC
SIMATIC PCS 7 SIMATIC Manual Collection 6ES7998-8XC01-8YE2
SIMATIC PG/PC update service for 1 year
Current "Manual Collection" DVD
SIMATIC S7 and the three subsequent
SIMATIC Software updates
SIMATIC TDC
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 2/3
Siemens AG 2014
Appendix
Standards and approbations
CE marking
2/4 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Appendix
Standards and approbations, quality management
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 2/5
Siemens AG 2014
Appendix
Partner
Siemens contacts worldwide
Overview
At Siemens Industry we are resolutely pursuing the same goal:
long-term improvement of your competitive ability.
We are committed to this goal. Thanks to our commitment, we
continue to set new standards in automation and drive tech-
nology. In all industries worldwide.
At your service locally, around the globe for consulting, sales,
training, service, support, spare parts ... on the entire Industry
Automation and Drive Technologies range.
Your personal contact can be found in our Contacts Database at:
2 www.siemens.com/automation/partner
You start by selecting a
Product group,
Country,
City,
Service.
2/6 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Appendix
Partner
Siemens Partner Program
Overview
Siemens Solution und Approved Partners Partner Finder
In addition to Siemens contract products, Siemens Approved Additional information on the Siemens Solution Partner Program
Partners also offer modifications as well as a wide range of is available online at:
services. Our network of Approved Partners is currently being www.siemens.de/partnerprogramm
built up/expanded.
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 2/7
Siemens AG 2014
Appendix
Siemens Automation Cooperates with Education
Applicable practical know-how
2
Siemens Automation Cooperates with Education (SCE)
offers a global system for sustained support of technical skills.
SCE supports educational institutions in their teaching assign-
ment in the industrial automation sector and offers added value
in the form of partnerships, technical expertise, and know-how.
As the technological leader, our comprehensive range of
services can support you in the knowledge transfer for Industry
4.0.
Our services at a glance
Training curriculums for your lessons
Trainer packages for hands-on learning
Courses convey up-to-date, specialist knowledge Our SCE trainer packages offer a specific combination of
Support for your projects/textbooks original industrial components which are perfectly matched to
your requirements and can be conveniently used in your course.
Complete didactic solutions from our partners These price reduced bundles available exclusively to schools
Personal contact for individual support include innovative and flexible hardware and software
packages. SCE can currently offers more than 90 SCE trainer
Training curriculums for your lessons packages including related equipment. These cover both the
factory and process automation sectors. You can use them to
impart the complete course contents on industrial automation at
a very low cost.
Trainer packages are available for:
Introduction to automation technology with LOGO! logic
module and SIMATIC S7-1200 compact controller
PLC engineering with SIMATIC S7 hardware and STEP 7
software (S7-300, S7-1500 and TIA Portal)
Operator control and monitoring with SIMATIC HMI
Industrial networking over bus systems with SIMATIC NET
(PROFINET, PROFIBUS, IO-Link)
Sensor systems with VISION, RFID and SIWAREX
Process automation with SIMATIC PCS 7
Power Monitoring Devices SENTRON PAC 4200
Motor Management SIMOCODE
Networked drive and motion technologies with SINAMICS/
SIMOTION
Use our profound industrial know-how for practice-oriented and CNC programming with SinuTrain
individual design of your course. We offer you more than 100
didactically prepared training curriculums on the topics of Important ordering notes:
automation and drives technology free of charge. These
Only the following institutions are authorized to obtain trainer
materials are perfectly matched to your curricula and sylla-
packages: vocational schools, Colleges and Universities,
buses, and optimally suited for use with our trainer packages.
in-house vocational training departments, non commercial
This takes into account all aspects of a modern industrial
research institutions and non commercial training departments.
solution: installation, configuration, programming, and commis-
sioning. All documents, including projects, can be individually To purchase a trainer package, you require a specific end-use
matched to your specific requirements. certificate, which you can obtain from your regional sales office.
Particular highlights: www.siemens.com/sce/tp
With the new SIMATIC PCS 7 curriculums and trainer
packages, you can pass on basic, practice-oriented PCS 7
knowledge at universities within about 60 hours (= 1
semester), using plant simulation.
2/8 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Appendix
Siemens Automation Cooperates with Education
Applicable practical know-how
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 2/9
Siemens AG 2014
Appendix
Online Services
Information and Ordering in the Internet and on DVD
2/10 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Appendix
Online Services
Information and Download Center, Social Media, Mobile Media
Downloading Catalogs
In addition to numerous other useful documents, you can also
find the catalogs listed on the back inside cover of this catalog
in the Information and Download Center. Without having to reg-
ister, you can download these catalogs in PDF format or increas-
ingly as digital page-turning e-books.
The filter dialog box above the first catalog displayed makes it
possible to carry out targeted searches. If you enter MD 3 for
example, you will find both the MD 30.1 and MD 31.1 catalogs.
If you enter ST 70 both the ST 70 catalog and the associated
news or add-ons are displayed.
Visit us on the web at:
2
www.siemens.com/industry/infocenter
Social Media
Connect with Siemens through social media: visit our social net-
working sites for a wealth of useful information, demos on prod-
ucts and services, the opportunity to provide feedback, to ex-
change information and ideas with customers and other
Siemens employees, and much, much more. Stay in the know
and follow us on the ever-expanding global network of social
media.
Connect with Siemens Industry at our central access point:
www.siemens.com/industry/socialmedia
Or via our product pages at:
www.siemens.com/automation
or
www.siemens.com/drives
To find out more about Siemens' current social media activities
visit us at:
www.siemens.com/socialmedia
Mobile Media
Discover the world of Siemens.
We are also constantly expanding our offering of cross-platform
apps for smartphones and tablets. You will find the current Sie-
mens apps at the app store (iOS) or at Google Play (Android).
The Siemens app, for example, tells you all about the history, lat-
est developments and future plans of the company with infor-
mative pictures, fascinating reports and the most recent press
releases.
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 2/11
Siemens AG 2014
Appendix
Industry Services
Your machines and plant can do more with Industry Services.
Whether it is production or process industry - in view of rising
cost pressure, growing energy costs, and increasingly stringent
environmental regulations, services for industry are a crucial
competitive factor in manufacturing as well as in process indus-
tries.
All over the world Siemens supports its customers with product,
system, and application-related services throughout the entire
life cycle of a plant. Right from the earliest stages of planning,
engineering, and building, all the way to operation and modern-
ization. These services enable customers to benefit from the
Siemens experts unique technological and product knowledge
2
and industry expertise.
Thus downtimes are reduced and the utilization of resources is
optimized. The bottom line: increased plant productivity, flexibil-
ity, and efficiency, plus reduced overall costs.
Discover all advantages of our service portfolio:
www.siemens.com/industry-services
7HFKQLFDO&RQVXOWLQJ
(QJLQHHULQJ6XSSRUW
(QHUJ\
(QYLURQPHQWDO6HUYLFHV Planning
Planning
3ODQW0DLQWHQDQFH
&RQGLWLRQ0RQLWRULQJ
Operation
Operation
6HUYLFH&RQWUDFWV
(QHUJ\ (QYLURQPHQWDO6HUYLFHV
0RGHUQL]DWLRQ 2SWLPL]DWLRQ6HUYLFHV
G_DA65_EN_00270
Siemens supports its clients with technology based Services across a plants entire life cycle.
2/12 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Appendix
Industry Services
Industry Services for the entire life cycle
Online Support
Online support is a comprehensive information system for all
questions relating to products, systems, and solutions that
Siemens has developed for industry over time. With more than
300,000 documents, examples and tools, it offers users of auto-
mation and drive technology a way to quickly find up-to-date in-
formation. The 24-hour service enables direct, central access to
detailed product information as well as numerous solution exam-
ples for programming, configuration and application.
The content, in six languages, is increasingly multimediabased
and now also available as a mobile app. Online supports
Technical Forum offers users the opportunity to share informa-
tion with each other. The Support Request option can be used 2
to contact Siemens technical support experts. The latest con-
tent, software updates, and news via newsletters and Twitter en-
sure that industry users are always up to date.
www.siemens.com/industry/onlinesupport
Using the Online Support app, you can access over 300,000 mySupport. You also receive selected news on new functions,
documents covering all Siemens industrial products - anywhere, important articles or events in the News section.
any time. Regardless of whether you need help implementing
your project, fault-finding, expanding your system or are plan-
ning a new machine.
You have access to FAQs, manuals, certificates, characteristics
curves, application examples, product notices (e.g. announce- Scan the QR code
ments of new products) and information on successor products for information on
in the event that a product is discontinued. our Online Support
Just scan the product code printed on the product directly using app.
the camera of your mobile device to immediately see all techni-
cal information available on this product at a glance. The graph- The app is available free of charge from the Apple App Store
ical CAx information (3D model, circuit diagrams or EPLAN mac- (iOS) or from Google Play (Android).
ros) is also displayed. You can forward this information to your
workplace using the e-mail function. www.siemens.com/industry/onlinesupportapp
Technical Support
The ability to quickly analyze system and error messages and
take appropriate action are key factors in ensuring that plants
run safely and efficiently. Questions can arise at any time and in
any industry, whether its an individual product or a complete au-
tomation solution. Siemens technical support offers individual
technical assistance in matters related to functionality, how to
operate, applications, and fault clearance in industrial products
and systems at any time and globally, over the phone, by e-
mail, or via remote access. Experienced experts from Siemens
answer incoming questions promptly. Depending on the require-
ments, they first consult specialists in the areas of development,
on-site services, and sales. Technical support is also available
for discontinued products that are no longer available. Using the
support request number, any inquiry can be clearly identified
and systematically tracked.
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 2/13
Siemens AG 2014
Appendix
Industry Services
Industry Services for the entire life cycle
Spare Parts
Drive and automation systems must be available at all times.
Even a single missing spare part can bring the entire plant to a
standstill and result in substantial financial losses for the oper-
ator. The spare parts services from Siemens protects against
such losses with the aid of quickly available, original spare
parts that ensure smooth interaction with all other system com-
ponents. Spare parts are kept on hand for up to ten years; de-
fective parts can be returned. For many products and solutions,
individual spare parts packages ensure a preventive stock of
spare parts on-site. The spare parts services is available around
2
the world and around the clock. Optimum supply chain logistics
ensure that replacement components reach their destination as
quickly as possible. Siemens logistics experts take care of plan-
ning and management as well as procurement, transportation,
customs handling, warehousing, and complete order manage-
ment for spare parts.
Repair Services
Reliable electrical and electronic equipment is crucial for oper-
ating continuous processes. That is why it is essential that mo-
tors and converters always undergo highly specialized repair
and maintenance. Siemens offers complete customer and repair
services on site and in repair centers as well as technical
emergency services worldwide. The repair services include all
measures necessary to quickly restore the functionality of defec-
tive units. In addition, services such as spare parts logistics,
spare parts storage and rapid manufacturing are available to
plant operators in all verticals. With a global network of certified
repair shops operated by Siemens as well as third parties, Sie-
mens handles the maintenance and overhaul of motors, convert-
ers, and other devices as an authorized service partner.
Field Services
Its a top priority in all industries: the availability of plants and
equipment. Siemens offers specialized maintenance services
such as inspection and upkeep as well as rapid fault clearance
in industrial plants worldwide, continuously, and even with
emergency services as needed. The services include startup as
well as maintenance and fault clearance during operation. The
startup service includes checking the installation, function tests,
parameterization, integration tests for machines and plants, trial
operation, final acceptance, and employee training. All services,
including remote maintenance of drives, are also available as el-
ements of customized service contracts.
2/14 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Appendix
Industry Services
Industry Services for the entire life cycle
Training
Increasingly, up-to-date knowledge is becoming a determining
factor in success. One of the key resources of any company is
well-trained staff that can make the right decision at the right mo-
ment and take full advantage of the potential. With SITRAIN
Training for Industry, Siemens offers comprehensive advanced
training programs. The technical training courses convey exper-
tise and practical knowledge directly from the manufacturer.
SITRAIN covers Siemens entire product and system portfolio in
the field of automation and drives. Together with the customer,
Siemens determines the companys individual training needs
2
and then develops an advanced training program tailored to the
desired requirements. Additional services guarantee that the
knowledge of all Siemens partners and their employees is al-
ways up-to-date.
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 2/15
Siemens AG 2014
Appendix
Industry Services
Industry Services for the entire life cycle
Modernization & Optimization Services
High machine availability, expanded functionality and selective
energy savings in all industries, these are decisive factors for
increasing productivity and lowering costs. Whether a company
wants to modernize individual machines, optimize drive sys-
tems, or upgrade entire plants, Siemens experts support the
projects from planning to commissioning.
Expert consulting and project management with solution respon-
sibility lead to security and make it possible to specifically iden-
tify savings potential in production. This secures investments
over the long term and increases economic efficiency in opera-
2 tion.
Service Contracts
Making maintenance costs calculable, reducing interfaces,
speeding up response times, and unburdening the companys
resources the reduced downtimes that these measures
achieve increase the productivity of a plant. Service contracts
from Siemens make maintenance and repairs more cost-effec-
tive and efficient. The service packages include local and re-
mote maintenance for a system or product group in automation
and drive technology. Whether you need extended service peri-
ods, defined response times, or special maintenance intervals,
the services are compiled individually and according to need.
They can be adjusted flexibly at any time and used indepen-
dently of each other. The expertise of Siemens specialists and
the capabilities of remote maintenance thus ensure reliable and
fast maintenance processes throughout a plants entire lifecycle.
2/16 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Appendix
Software Licenses
Overview
Software types Rental floating license
Software requiring a license is categorized into types. The rental floating license corresponds to the rental license,
The following software types have been defined: except that a license is not required for each installation of the
Engineering software software. Rather, one license is required per object (for example,
user or device).
Runtime software
Trial license
Engineering software
A trial license supports "short-term use" of the software in a non-
This includes all software products for creating (engineering) productive context, e.g. for testing and evaluation purposes.
user software, e.g. for configuring, programming, parameteriz-
ing, testing, commissioning or servicing.
It can be transferred to another license.
Demo license
2
Data generated with engineering software and executable
programs can be duplicated for your own use or for use by third- The demo license support the "sporadic use" of engineering soft-
parties free-of-charge. ware in a non-productive context, for example, use for testing
and evaluation purposes. It can be transferred to another
Runtime software license. After the installation of the license key, the software can
This includes all software products required for plant/machine be operated for a specific period of time, whereby usage can be
operation, e.g. operating system, basic system, system expan- interrupted as often as required.
sions, drivers, etc. One license is required per installation of the software.
The duplication of the runtime software and executable pro-
grams created with the runtime software for your own use or for Demo floating license
use by third-parties is subject to a charge. The demo floating license corresponds to the demo license,
You can find information about license fees according to use in except that a license is not required for each installation of the
the ordering data (e.g. in the catalog). Examples of categories of software. Rather, one license is required per object (for example,
use include per CPU, per installation, per channel, per instance, user or device).
per axis, per control loop, per variable, etc. Certificate of license (CoL)
Information about extended rights of use for parameteriza- The CoL is the licensee's proof that the use of the software has
tion/configuration tools supplied as integral components of the been licensed by Siemens. A CoL is required for every type of
scope of delivery can be found in the readme file supplied with use and must be kept in a safe place.
the relevant product(s).
Downgrading
License types
The licensee is permitted to use the software or an earlier ver-
Siemens Industry Automation & Drive Technologies offers vari- sion/release of the software, provided that the licensee owns
ous types of software license: such a version/release and its use is technically feasible.
Floating license
Delivery versions
Single license
Software is constantly being updated.
Rental license The following delivery versions
Rental floating license PowerPack
Trial license Upgrade
Demo license can be used to access updates.
Demo floating license Existing bug fixes are supplied with the ServicePack version.
Floating license PowerPack
The software may be installed for internal use on any number of PowerPacks can be used to upgrade to more powerful software.
devices by the licensee. Only the concurrent user is licensed. The licensee receives a new license agreement and CoL
The concurrent user is the person using the program. Use (Certificate of License) with the PowerPack. This CoL, together
begins when the software is started. with the CoL for the original product, proves that the new soft-
A license is required for each concurrent user. ware is licensed.
Single license A separate PowerPack must be purchased for each original
license of the software to be replaced.
Unlike the floating license, a single license permits only one
installation of the software per license. Upgrade
The type of use licensed is specified in the ordering data and An upgrade permits the use of a new version of the software on
in the Certificate of License (CoL). Types of use include for the condition that a license for a previous version of the product
example per instance, per axis, per channel, etc. is already held.
One single license is required for each type of use defined. The licensee receives a new license agreement and CoL with
the upgrade. This CoL, together with the CoL for the previous
Rental license product, proves that the new version is licensed.
A rental license supports the "sporadic use" of engineering A separate upgrade must be purchased for each original license
software. Once the license key has been installed, the software of the software to be upgraded.
can be used for a specific period of time (the operating hours do
not have to be consecutive).
One license is required for each installation of the software.
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 2/17
Siemens AG 2014
Appendix
Software Licenses
Overview
ServicePack Software Update Service (SUS)
ServicePacks are used to debug existing products. As part of the SUS contract, all software updates for the respec-
ServicePacks may be duplicated for use as prescribed accord- tive product are made available to you free of charge for a period
ing to the number of existing original licenses. of one year from the invoice date. The contract will automatically
be extended for one year if it is not canceled three months
License key before it expires.
Siemens Industry Automation & Drive Technologies supplies The possession of the current version of the respective software
software products with and without license keys. is a basic condition for entering into an SUS contract.
The license key serves as an electronic license stamp and
2 is also the "switch" for activating the software (floating license,
rental license, etc.).
You can download explanations concerning license conditions from
www.siemens.com/automation/salesmaterial-as/catalog/en/
The complete installation of software products requiring license terms_of_trade_en.pdf
keys includes the program to be licensed (the software) and the
license key (which represents the license).
2/18 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Appendix
Notes
LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70 2/19
Siemens AG 2014
Appendix
Conditions of sale and delivery
2/20 LOGO! logic module, Extract December 2014 from Siemens Catalog ST 70
Siemens AG 2014
Catalogs
Industry Automation, Drive Technologies and Low-Voltage Power Distribution
Further information can be obtained from our branch offices listed at www.siemens.com/automation/partner
System Solutions for Industry Catalog Low-Voltage Power Distribution and Catalog
Interactive Catalog on DVD Electrical Installation Technology
Products for Automation and Drives, Low-Voltage Power CA 01 SENTRON SIVACON ALPHA LV 10
Distribution and Electrical Installation Technology Protection, Switching, Measuring and Monitoring
Devices, Switchboards and Distribution Systems
Building Control Standards-Compliant Components for LV 11
GAMMA Building Control ET G1 Photovoltaic Plants
Electrical Components for the Railway Industry LV 12
Drive Systems TV-certified Power Monitoring System LV 14
SINAMICS G130 Drive Converter Chassis Units D 11 3WT Air Circuit Breakers up to 4000 A LV 35
SINAMICS G150 Drive Converter Cabinet Units 3VT Molded Case Circuit Breakers up to 1600 A LV 36
SINAMICS GM150, SINAMICS SM150 D 12 Digital: SIVACON System Cubicles, System Lighting LV 50
Medium-Voltage Converters and System Air-Conditioning
SINAMICS PERFECT HARMONY GH180 D 15.1 Digital: ALPHA Distribution Systems LV 51
Medium-Voltage Air-Cooled Drives ALPHA FIX Terminal Blocks LV 52
Germany Edition
SIVACON S4 Power Distribution Boards LV 56
SINAMICS G180 D 18.1
Converters Compact Units, Cabinet Systems, Digital: SIVACON 8PS Busbar Trunking Systems LV 70
Cabinet Units Air-Cooled and Liquid-Cooled Digital: DELTA Switches and Socket Outlets ET D1
SINAMICS S120 Chassis Format Units and D 21.3
Cabinet Modules Motion Control
SINAMICS S150 Converter Cabinet Units SINUMERIK & SIMODRIVE NC 60
SINAMICS DCM DC Converter, Control Module D 23.1 Automation Systems for Machine Tools
SINAMICS DCM Cabinet D 23.2 SINUMERIK & SINAMICS NC 61
SINAMICS Inverters for Single-Axis Drives and D 31 Equipment for Machine Tools
SIMOTICS Motors SINUMERIK 840D sl Type 1B NC 62
SINAMICS G120P and SINAMICS G120P Cabinet D 35 Equipment for Machine Tools
pump, fan, compressor converters SINUMERIK 808 NC 81.1
Three-Phase Induction Motors SIMOTICS HV, D 84.1 Equipment for Machine Tools
SIMOTICS TN SINUMERIK 828 NC 82
Series H-compact Equipment for Machine Tools
Series H-compact PLUS
SIMOTION, SINAMICS S120 & SIMOTICS PM 21
Asynchronous Motors Standardline D 86.1 Equipment for Production Machines
Synchronous Motors with Permanent-Magnet D 86.2 Drive and Control Components for Cranes CR 1
Technology, HT-direct
DC Motors DA 12 Power Supply
SIMOREG DC MASTER 6RA70 Digital Chassis DA 21.1 Power supply SITOP KT 10.1
Converters
SIMOREG K 6RA22 Analog Chassis Converters DA 21.2
Safety Integrated
Digital: SIMOREG DC MASTER 6RM70 Digital DA 22
Converter Cabinet Units Safety Technology for Factory Automation SI 10
SIMOVERT PM Modular Converter Systems DA 45
SIEMOSYN Motors DA 48 SIMATIC HMI/PC-based Automation
MICROMASTER 420/430/440 Inverters DA 51.2 Human Machine Interface Systems/ ST 80/
MICROMASTER 411/COMBIMASTER 411 DA 51.3 PC-based Automation ST PC
SIMODRIVE 611 universal and POSMO DA 65.4
Note: Additional catalogs on SIMODRIVE or SINAMICS SIMATIC Ident
drive systems and SIMOTICS motors with SINUMERIK Industrial Identification Systems ID 10
and SIMOTION can be found under Motion Control
Low-Voltage Three-Phase-Motors SIMATIC Industrial Automation Systems
SIMOTICS Low-Voltage Motors D 81.1 Products for Totally Integrated Automation ST 70
SIMOTICS FD Flexible Duty Motors D 81.8 SIMATIC PCS 7 Process Control System ST PCS 7
LOHER Low-Voltage Motors D 83.1 System components
MOTOX Geared Motors D 87.1 SIMATIC PCS 7 Process Control System ST PCS 7 T
SIMOGEAR Geared Motors MD 50.1 Technology components
SIMOGEAR Gearboxes with adapter MD 50.11 Add-ons for the SIMATIC PCS 7 ST PCS 7 AO
Process Control System
Mechanical Driving Machines
FLENDER Standard Couplings MD 10.1
SIMATIC NET
FLENDER High Performance Couplings MD 10.2
Industrial Communication IK PI
FLENDER SIG Standard industrial gear units MD 30.1
FLENDER SIP Standard industrial planetary gear units MD 31.1
SIRIUS Industrial Controls
Process Instrumentation and Analytics SIRIUS Industrial Controls IC 10
Field Instruments for Process Automation FI 01
Digital: SIPART Controllers and Software MP 31
Information and Download Center
Products for Weighing Technology WT 10
Digital versions of the catalogs are available on the Internet at:
Digital: Process Analytical Instruments PA 01
www.siemens.com/industry/infocenter
Digital: Process Analytics, PA 11 There youll find additional catalogs in other languages.
Components for the System Integration
Please note the section Downloading catalogs on page
Digital: These catalogs are only available as a PDF. Online services in the appendix of this catalog.
Siemens AG 2014
Security information
Siemens provides products and solutions with
industrial security functions that support the
secure operation of plants, solutions, machines,
equipment and/or networks. They are important
components in a holistic industrial security
concept. With this in mind, Siemens products
and solutions undergo continuous development.
Siemens recommends strongly that you regularly
check for product updates.
Siemens AG Subject to change without prior notice The information provided in this catalog contains merely general
Digital Factory Division KG 1214 PDF 76 En descriptions or characteristics of performance which in case of actual
use do not always apply as described or which may change as a result
Factory Automation Produced in Germany
of further development of the products. An obligation to provide the
Postfach 48 48 Siemens AG 2014 respective characteristics shall only exist if expressly agreed in the
90026 NRNBERG terms of contract. Availability and technical specifications are subject
GERMANY to change without notice.
All product designations may be trademarks or product names
of Siemens AG or supplier companies whose use by third parties
for their own purposes could violate the rights of the owners.
www.siemens.com/automation