anu
onda:
woo‘suyjuoadarassay/:dy
‘http://www.rgpvoniine.com
M4
8, a) What decides the sizes of flexibility and stiffness
matrices fora sicture.
1b) Discuss why the released structure which minimizes
the magnitudes of redundants generally leads to the
maximum accurey.
http://www.rgpvontine.com
Total No, ef Questions: 8}
Roll No
MVSE - 103
M.EJM.Tech., [Semester
Examination, June 2016
‘Advance Structural Analysis,
‘Time: Three Hours
‘Maximum Marks : 70:
i) Attemptany five questions
ii) Each questions carry equal marks.
fil) Assume missing data suitable,
(oat No of Printed Pages : 4
dirasmay/:dyyi,
ro 9‘auyuoa
1, 8) Whatismmeanthy degree offieedom. Give some examples.
) Compute the flexibility matrix considering axial and
‘exural deformations forthe beam shown in figure 1.
WSIS
htty
/twww.rgpvonline.com
a [as
Ew EA 3
awe 1 x
2. Amys the tame ss shonin gue 2by te force mths. 2
5am ° z
g
ae 7op suyquoads.racnayysdy
moo'surjuoad3.rassay/d yy
http://www.rgpvonline.com
2
3. Analyse the pin-jinted frame of fguee 3 by the force metho,
‘Te axial iby, isthe same fr al the members.
‘Tre numbers in parentheses are the eros sectional areas of
Figure3
4 Using the dnplacement method, analyse the fame shown in
Figues. 4, ot 5 Mtn
Figure4
Fed
ae ol
5. Analyse the conditions beam of figure'S by displacement
‘method. The beam rests on elastic supports at B and C. The
om
100 4 300
of Band Cin KN-m are 109 ang 300
supports in pana
respectively,
Ag. 080m
flexi
1p 20kng
Be Media lS” Figo
http://www.rgpvontine.com
PLEO Sa
6. Analyse the space fame shownin figure 6 by the displacement
‘method. Elis the same forall the members and GK =0.6 EL.
7. Analyse the structure showin figure 7 using stiffness method.
‘The members are 350 mm in width and 700 mm in depth.
‘Take E= 1200kN/cm? and G= 600kN/em?,
=
i
2