ON BOARD DIAGNOSTIC (OBD) SYSTEM NISSAN NAVARA.
Dagnosic Toot] KEY and ENG] Foncbon Eapanaon of Function
Nooo | Sane
ose TpntonaniGhn | BULB CHECK Thi uncon check he bb for darage (own, open
On pounon : treat
Ifthe MI does not come on, check MI circuit. (See EC-354_
@ MLS DATA LINK CONNECTORS" .)
Engine Hope
Engine running | MALFUNCTION Thi a usal ng conn, When EOM dates ak
: WARNING {unen, he Miwa ht up tore erat ama
a function has been detected.
Woe Teli wih | SELF-DIAGNOSTIC Tis union allows DTCs to be red
Gnpouton | RESULTS
Engine sed
&
HOW TO SWITCH DIAGNOSTIC TEST MODE
NOTE:
¢ It is better to count the time accurately with a clock.
It is impossible to switch the diagnostic mode when an accelerator pedal position sensor circuit
has a malfunction.
Always ECM returns to Diagnostic Test Mode | after ignition switch is turned OFF.
How to Set Diagnostic Test Mode Il (Self-diagnostic Results)
1. Confirm that accelerator pedal s fully released, tum ignition switch ON and wait 3 seconds.
2, Repeat the following procedure quickly five times within 5 seconds.
2. Fully depress the accelerator pedal.
b. Fully release the accelerator pedal.
3. Walt 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the MI starts
blinking.
4. Fully release the accelerator pedal.
ECM has entered to Diagnostic Test Mode Il (Sel
anion on
switch ore! Diagnostic test mode tl
thin 7 888 (Selt-ciagnoctic recut) More than
Is e0¢. Ss00 stan. 101806. erasing ECM
memory
jagnostic results).
EC-29