You are on page 1of 8
ee ioe MOON ROOF COMPONENTS << S sri wigenereden , #9? Pigg 0 coe Front Shoe Roof Guide Rail: Inna Panel Side os LE Opening Trim Moulding Holder sun Visor RO A Front Pil Garnish >—®, om oR td i cones © gS Cover Inner Rear View Mirror Assist Grip er 80-46 BODY — Moon Root ON-VEHICLE INSPECTION a INSPECT SLIDING ROOF GLASS ALIGNMENT See (a) Start the engine and check the operation time of the SLO sun roof. S “yr \ Operation time: Approx. 8 secs. (b} Check for abnormal noise or binding during opera- u tion. (c)_ With the sun roof fully closed, check for water leak- soo1s9 age. If the sliding roof does not operate: a) Open the holder of the control switch cover. (b} Using @ special crank-shaped screwdriver, remove ~ the large screw inside. NOTICE: Be careful not to lose the spring washer or shim. {ce} Manually operate the sun roof by inserting a special crank-shaped screwdriver into the hole and turning the drive shaft Gua Gatusawm core} ADJUSTMENT OF SLIDING ROOF OF THE curs so 1. REMOVE INNER PANEL SIDE GARNISH AasH 2OWIn Before making adjustments, remove the inner panel side garish. " HINT: After adjustment, reinstall the inner panel side garish. Dour Lzuse OV AMETE 46 /T cone BeeAK THE Paste CLO 2UGs OFF. TO ADJUST LEVEL DIFFERENCE ‘Adjust by increasing or decreasing the number of shims. HINT: If the front of the sliding roof is high, even with- ‘out a shoe shim, check to see if the front shoes are in contact with the stoppers, nin san li

You might also like