Professional Documents
Culture Documents
TC1047 PDF
TC1047 PDF
Block Diagram
TC1047/1047A
VDD = 2.5V to 5.5V
PIC
Microcontroller
1 2
VDD VDD VOUT
A/D Note: 3-Pin SOT-23B is equivalent to JEDEC TO-236
TC1047A Converter
VSS
ELECTRICAL CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated, these specifications apply for the entire supply voltage range
and for TA = -40C to +125C.
Parameters Sym Min Typ Max Units Conditions
Supply Voltage VDD 2.7 4.4 V TC1047
2.5 5.5 V TC1047A
Supply Current, Operating IQ 35 60 A
Average Slope of Output Voltage AV 10 mV/C
Temperature Accuracy TMPACY -2 0.5 +2 C TA = 25C
-3 0.5 +3 C TA = +125C
1.0 C TA = -40C
Output Voltage VOUT 100 mV TA = -40C
730 750 770 mV TA = 25C
1720 1750 1780 mV TA = +125C
Output Source and Sink Current IOUT 100 A
TEMPERATURE CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated, VDD = +2.3V to +5.5V and VSS = GND.
Parameters Sym Min Typ Max Units Conditions
Temperature Ranges
Specified Temperature Range TA -40 +85 C
Operating Temperature Range TA -40 +125 C Note 1
Storage Temperature Range TA -65 +150 C
Thermal Package Resistances
Thermal Resistance, 3L-SOT-23B JA 336 C/W
Note 1: The TC1047/TC1047A operate over this extended temperature range, but with reduced performance. In
any case, the Junction Temperature (TJ) must not exceed the Absolute Maximum specification of +150C.
50
3
VDD = 5.5V
2 40
Temp Accy (C)
VDD = 2.5V
1
VDD = 2.5V 30
IDD (A)
0
VDD = 5.5V 20
1
2
10
3
110
125
20
35
50
65
80
95
40
25
10
0
-40 -25 -10 5 20 35 50 65 80 95 110 125
Temperature (C)
Temp. (C)
FIGURE 2-1: Temperature Accuracy vs. FIGURE 2-2: Supply Current vs.
Temperature. Temperature.
1.75
1.7
1.5
1.3
VOUT (Volts)
1.1
0.9
0.7
0.5
0.3
0.1
Temperature (C)
3-Pin SOT-23B
Note: In the event the full Microchip part number cannot be marked on one line, it will
be carried over to the next line, thus limiting the number of available
characters for customer-specific information.
Note: For the most current package drawings, please see the Microchip Packaging Specification located
at http://www.microchip.com/packaging
E1
B p1 D
n p
1
a
c
A A2
f A1
b L
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchips Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as unbreakable.
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchips code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
QUALITY MANAGEMENT SYSTEM Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
CERTIFIED BY DNV Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Companys quality system processes and procedures
== ISO/TS 16949 ==
are for its PIC MCUs and dsPIC DSCs, KEELOQ code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchips quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.