Sa
ma ele
GUIDE
UNIVERSAL BEAMS
UNIVERSAL COLUMNS
CHANNELS
ANGLES
ROUNDS & SQUARES
FLATS
PLATES
SHEETS
HOLLOW SECTIONS
ERW TUBES
HANDRAIL TUBES
BRIGHTS
Barclay
& Mathieson
More than steelFrom square bars to sheets, we've got
it covered. Drop in to your local depot
for all your steel requirements.
As a well established steel suppliers and steel stockholders
and part of a large group, Barclay + Mathieson is amongst
the UK's top five steel stockholders. With access to over
40,000 tonnes of steel from stock, we have the capability to
supply customers, both large and small, with an increasing
variety of products and services from our strategically located
branches nationwide.
B+M also stock a wide range of complementary products...
Handrail Products
Tubes
Handrail Clamps
Handrail Components
Gates and Ladders
Edge Protection
Kwik-Roof
Stainless Steel Balustrade
Mesh, Expanded Metal
& Perforated Sheet
Industrial Weldmesh
Prison Mesh
Stainless Steel Mesh
Expanded Metal
Perforated Sheet
Edging Sections
Gates & Fencing
Palisade Fencing
Gate Hinges
Gate Locks, Closers & Accessories
Gate Automation
Sliding Doors
Cantilever Gates
Walkway Products
OSF - Flooring
Stair Treads
Durbar Tread & Nosing
Perforated Planks
GRP Flooring
Aluminium Treadplate
Stainless Steel Treadplate
ARMCO Crash Barriers
Fixings
GRP
Grating
Planks
Treads
Covers & more..
Cladding
Ancillary Products
Paint
Pallet Feet
Plastic End Caps
Brochure available on request
or see website for details.
More than Steel
www.bmsteel.co.uk
All weights and conversions in this publication have been offered as a
guide only. B+M accepts no responsibility for their use.UNIVERSAL BEAMS
Certified to British & European Standards
B.
Mass | Depth Width Thickness
ignati Nath S ston Section Web Flange
Designation | metre | Se D B . 7
kgim | mm mm mm mm
127 x76 x 13 13.0 127.0 76.0 4.0 76
152 x 89 x 16 16.0 152.4 88.7 4S Li,
178 x 102x 19 | 19.0 1778 101.2 48 79
203 x 102 x 23 | 23.1 203.2 101.8 54 9.3
203 x 133 x25 | 25.1 203.2 133.2 57 78
203 x 133 x 30 | 30.0 206.8 133.9 64 9.6
254 x 102 x22 | 22.0 254.0 101.6 57 68
254 x 10225 | 25.2 257.2 101.9 6.0 84
254 x 102 x 28 | 28.3 260.4 102.2 63 10.0
254 x 146 x 31 31.1 251.4 146.1 6.0 86
254 x 146 x 37 | 37.0 256.0 146.4 63 10.9
254 x 146 x 43 | 43.0 259.6 147.3 rhe 127
305 x 102 x25 | 248 305.1 101.6 58 70
305 x 102 x 28 | 282 308.7 101.8 6.0 88
305 x 102 x 33 | 328 3127 102.4 6.6 10.8
305 x 127 x 37 | 37.0 304.4 123.3 7.1 10.7
305 x 127 x 42 | 41.9 307.2 124.3 8.0 12.1
305 x 127x 48 | 48.1 311.0 125.3 9.0 14.0
305 x 165x 40 | 40.3 303.4 165.0 6.0 10.2
305 x 165 x 46 | 46.1 306.6 165.7 67 118
305 x 165 54 | 54.0 310.4 166.9 79 13.7
356 x 127 x 33 | 33.1 349.0 125.4 6.0 85
356 x 127 x 39 | 39.1 353.4 126.0 6.6 10.7
356 x I71 x 45 | 45.0 351.4 I71.1 7.0 D7,
356 x I71 x 51 51.0 355.0 WAS 7A TES)
356 x 171 x 57 | 57.0 358.0 172.2 8.1 13.0
356 x 171 x 67 | 67.1 363.4 173.2 9.1 15.7
406 x 140 x 39 | 39.0 398.0 141.8 64 86
406 x 140x 46 | 46.0 403.2 142.2 68 TL2
406 x 178 x 54 | 54.1 402.6 177.7 ae 10.9
406 x 178 x 60 | 60.1 406.4 177.9 79 12.8
406 x 178 x 67 | 67.1 409.4 178.8 88 143
406 x 178 x 74 | 74.2 4128 179.5 95 16.0
457 x 1S2 x52 | 523 449.8 152.4 7.6 10.9
457 x 152 x 60 | 59.8 454.6 152.9 8.1 13.3
487 x 182 x 67 | 67.2 458.0 153.8 9.0 15.0
457 x IS2.x 74 | 74.2 462.0 154.4 9.6 17.0
457 x 152 x 82 | 82.1 465.8 155.3 10.5 18.9
Available in Standard Mill Lengths or cut to individual requirements.
HEAVY SECTIONSUNIVERSAL BEAMS ! |
[=
}——s.
Certified to British & European Standards
Mass | Depth Width Thickness
per 5 of . of Wana
ignati metre | Section Section fe! lange
Designation D B e Te
kg/m | mm mm mm mm
457 x 191 x 67 | 67.1 453.4 189.9 8.5 12.7
457 x 191 x 74 | 743 457.0 190.4 9.0 14.5
457 x 191 x 82 | 82.0 460.0 191.3 99 16.0
457 x 191 x 89 | 89.3 463.4 191.9 10.5 17.7
457 x 191 x 98 | 983 467.2 192.8 IL4 19.6
533 x 210 x 82 | 82.2 528.3 208.8 9.6 1322.
5333210 9292 ||'9211 533.1 209.3 10.1 15.6
533 x 210 x 101 | 101.0 536.7 210.0 10.8 17.4
533 x 210 x 109/109.0 539.5 210.8 11.6 18.8
533 x 210 x 122] 122.0 544.5 211.9 12.7 21.3
610 x 229 x 101 | 101.2 602.6 227.6 10.5 14.8
610 x 229 x 113] 113.0 607.6 228.2 IL 17.3
610 x 229 x 125} 125.1 612.2 229.0 19 19.6
610 x 229 x 140 | 139.9 617.2 230.2 13.1 22.1
610 x 305 x 149/ 149.1 6124 304.8 18 19.7
610 x 305 x 179|179.0 620.2 307.1 14.1 23.6
610 x 305 x 238 | 238.1 6358 3114 18.4 314
686 x 254 x 125 | 125.2 6779 253.0 17 16.2
686 x 254 x 140] 140.1 683.5 = 253.7 12.4 19.0
686 x 254 x 152} 152.4 687.5 254.5 13.2 21.0
686 x 254 x 170|170.2 692.9 255.8 14.5 23.7
762 x 267 x 134/|133.9 750.0 264.4 12.0 15.5
762 x 267 x 147|146.9 754.0 265.2 128 17.5
762 x 267 x 173|173.0 762.2 266.7 14.3 21.6
762 x 267 x 197|196.8 769.8 268.0 15.6 25.4
838 x 292 x 176|175.9 834.9 291.7 14.0 18.8
838 x 292 x 1194/1938 840.7 292.4 14.7 21.7
838 x 292 x 226 |226.5 850.9 293.8 16.1 26.8
914 x 305 x 201 |200.9 903.0 303.3 15.1 20.2
914 x 305 x 224 |224.2 910.4 304.1 15.9 23.9
914 x 305 x 253 |253.4 918.4 305.5 17.3 27.9
914 x 305 x 289 |289.1 926.6 307.7 19.5 32.0
914 x 419 x 343 |343.3 9118 418.5 19.4 32.0
914 x 419 x 388 | 388.0 921.0 420.5 214 36.6
Available in Standard Mill Lengths or cut to individual requirements.UNIVERSAL COLUMNS |
Certified to British & European Standards
Designation
per
metre
Depth
f
o) 4
Section
D
Section
B
152 x 152 x 23
152 x 152 x 30
152 x 152 x 37
203 x 203 x 46
356 x 368 x 202
203 x 203 x52 | 520 | 206.2 2043 125
203 x 203 x60 | 60.0 | 2096 2058 94 142
203 x203x71 | 71.0 | 2158 2064 | 100 173
203 x 203 x86 | 86.1 | 2222 2091 | 127 205
254 x 25473 | 73.1 | 254.1 2546 86 (142
254 x 254x89 | 889 | 260.3 2563 | 103 173
254 x 254 x 107| 107.1 | 266.7 2588 | 128 205
254 x 254 x 132]1320 | 2763 261.3 | 153 253
254 x 254 x 167] 167.1 | 289.1 265.2 | 192 317
305 x 305 x97 | 96.9 | 307.9 3053 99° «154
305 x305x 118/117.9 | 3145 3074 | 120 187
305 x 305 x 137/136.9 | 3205 3092 | 138 217
305 x 305 x 158/158.1 | 327.1 3112 | 158 25.0
305 x 305 x 198/198.1 | 3399 3145 | 191 314
305 x 305 x 240/240.0 | 3525 3184 | 230 377
305. x 305 x 283/282.9 | 3653 3222 | 268 44.1
356 x 368 x 129/129.0 | 355.6 3686 | 104 175
356 x 368 x 153]152.9 | 3620 3705 | 123 207
356 x 368 177/177.0 | 3682 3726 | 144 238
356 x 406 x 235
356 x 406 x 287
356 x 406 x 340
356 x 406 x 393
356 x 406 x 467
356 x 406 x 551
356 x 406 x 634
Available in Standard Mill Lengths or cut to individual requirements.me
TAPERED FLANGE
CHANNELS
Certified to British & European Standards
o
7
Depth Width Thickness
of of
per
Designati metre] Section Section! Web Flange
esignation D : : ng
51 x25 x 3.84
51 x38 x 581
76 x38 x7
Available in Standard Mill Lengths or cut to individual requirements.
PARALLEL FLANGE
CHANNELS l i
Certified to British & European Standards
Mass | Depth Width Thickness
per of of
Designation | metre] Section Section] Web Flange
D B t i
kg/m | mm mm mm mm
100x50 x10} 10.2 100 50 5.0 8.5
125x65 x15 65 95
150x75 x18 75
150x90 x24| 23.9 150 90 65 12.0
180x 75 x20} 203 180 75 6.0 10.5
180x90 x26| 26.1 180 90 65 12.5
200x75 x23) 23.4 200 75 6.0 12.5
200 x90 x30] 29.7 200 90 7.0 14.0
230x75 x26) 25.7 230 75 65 12s
230x90 x32) 32.2 230 90 75) 14.0
260x75 x28) 27.6 260 7S, 7.0 12.0
260x90 x35 90
300x90 x41 90
300 x 100 x 46 | 45.5 300 100 9.0 16.5
380 x 100 x 54
430 x 100 x 64
Available in Standard Mill Lengths or cut to individual requirements.EQUAL ANGLES
Certified to British & European Standards
Size
130 135¢3
20 x 20x 3
25x 25:3
25x25x4
2525505
30 x 30 x3
30 x 30x4
30x 30x5
40x 40 x3
40x 40x 4
40x 40x5
40 x 40 x 6
45x 45 x3
45x45 x4
45x45x5
45x45x6
50x 50x 3
50x50x5
50x 50x6
50x 50x8
60x 60x5
60x 60x6
60x 60x8
60 x 60 x 10
70x70 x6
70x 70x8
70 x 70 x 10
75x75x6
75x75x8
75x75 x 10
Kg/m
0.58
0.88
1.45
1.77
1.36
1.78
2.18
1.76
2.42
2.97
3.52
2.00
2.74
3.38
4.00
2.24
3.77
4AT
5.82
457
542
7.09
8.69
6.38
8.36
10.30
6.86
9.03
11.07
Lengths available from 6.000 metres.
Metres per tonne
1725
1137
901
690
565
736
562
459
569
414
337
285
500
365
296
250
447
266
224
172
219
185
142
116
157
120
8
146
Wl
91
EQUAL ANGLESEQUAL ANGLES
Certified to British & European Standards
Metres per tonne
x 80 x6
80 80 x8
80 80 x 10
80 80 x 12
90 90 x6
90 90 x8
90 90 x 10
90 90 x 12
100 x 100 x8
100 x 100 x10
100 x 100 x I2
100 x 100 x15
120 x 120 x8
120 x 120 x 10
120 x 120 x 12
120 x 120 x 15
150 x 150 x 10
150 x 150 x 12
150 x 150 x 15
150 x 150 x 18
200 x 200 x 16
200 x 200 x 18
200 x 200 x 20
200 x 200 x 24
Lengths available from 6.000 metres.UNEQUAL ANGLES
Certified to British & European Standards
Size
40 x 25 x4
50 x 40 x5
50 x 40 x6
60 x 30x5
60 x 30 x6
60 x 40 x6
65 x 50x5
65 x 50 x6
65 x 50x8
75 x 50 x6
75 x 50x8
75 x 50x10
80 x 60 x6
80 x 60 x8
100 x 50 x6
100 x 50 x8
100 x 65 x7
100 x 65 x8
100 x 65 x 10
100 x 75 x8
100 x 75 x10
100 x 75 x12
125 x 75 x8
125 x 75 x10
P25 5% (25/3/12
150 x 75 x 10
150 x 75 x12
150": 75) 3c [5
150 x 90 x 10
150 x 90 x12
150 x 90 x I5
200 x 100x 10
200 x 100 x 12
200 x 100x IS
200 x I50x 12
200 x ISOx IS
200 x 150x I8
Kg/m
1.91
3.50
4.33
3.37
3.99
446
435
5.16
6.75
5.65
7.39
9.27
6.37
8.34
6.85
8.99
8.77
9.94
12.30
10.60
13.00
15.40
12.20
15.00
17.80
17.00
20.20
24.80
18.20
21.60
26.60
23.00
27.30
33.70
32.00
39.60
47.10
Lengths available from 6.000 metres.
R.S. TEES
Certified to British & European Standards
Metres per tonne
Metres per tonne
40x 40x 5
40x 40x 6
50x 50x6
2.96
3.49
444
388
287
226
Structural Tees available, cut from Beams / Columns
Lengths available from 6.000 metres.
UNEQUAL ANGLES/TEES
\ROUNDS
Certified to British & European Standards
Size mm Kg/m Size mm Kg/m
6 0.222 110 74.600
8 0.395 11S 81.500
10 0.617 120 88.000
12 0.888 125 96.300
16 1.580 130 104.000
20 2.470 135 112.000
D2, 2.980 140 121.000
25 3.850 145 130.000
28.5 5.010 150 139.000
30 5.550 155 148.000
32 6.310 160 158.000
40 9.860 170 178.000
45 12.500 180 200.000
50 15.400 200 247.000
60 22.200 210 272.000
65 26.000 220 298.000
70 30.200 230 326.000
75 34.700 240 356.000
80 39.500 250 385.000
90 49.900 260 417.000
95 55.600 270 448.000
100 61.700 280 483.000
105 68.000 300 555.000
Lengths available from 6.000 metres.
SQUARES
Certified to British & oe Standards
Lengths available from 6.000 metres.FLATS
Certified to British & European Standards
Size Kg/m
10 x 3* 0.236
12x 3* 0.260
12x S* 0.470
12 x 6* 0.520
16 x 3* 0.377
16 x 5* 0.630
16 x 6* 0.750
20x3° 0.471
20x5 0.785
20x6 0.942
20x8 1.260
20 x 10 1.570
20x 12 1.880
25x 3* 0.589
25%: 0.981
25x6 1.180
25x8 1.570
25 x 10 1.960
25 x 12 2.360
25x 15 2.944
25 x 20 3.920
30 x 3* 0.707
30x5 1.180
30x6 1.410
30x8 1.884
30x 10 2.360
30x 12 2.830
30x 15 3.530
30 x 20 4710
30x 25 5.890
35:x.5 1.370
Lengths available from 6.000 metres.
* denotes from 4.000 metres.
FLATSFLATS
Certified to British & European Standards
Size Kg/m
50 x 40 15.700
60 x 3* 1.410
60x5 2.360
60 x6 2.830
60 x8 3.770
60 x 10 4710
60 x 12 5.650
60x IS 7.070
60 x 20 9.420
60 x 25 11.800
60 x 30 14.130
60 x 40 18.840
60 x 50 23.600
65 x6 3.060
65 x8 4.082
65 x 10 5.100
65 x 12 6.120
65 x IS 7.650
65 x 20 10.210
65 x 25 12.760
65 x 30 15.310
65 x 40 20.410
65 x 50 25.520
70x5 2.760
70 x6 3.300
70x8 4400
70 x 10 5.500
70 x 12 6.590
70x IS 8.240
70 x 20 11.000
70 x 25 13.740
Lengths available from 6.000 metres.
* denotes from 4.000 metres.FLATS
Certified to British & European Standards
100 x 3* 2.360
100 x 5 3.930
100 x 6 4710
100 x 8 6.280
100 x 10 7.850
100 x 12 9.420
100 x 15 11.800
100 x 20 15.700
100 x 25 19.630
100 x 30 23.600
100 x 40 31.400
100 x 50 39.300
120 x 6 5.650
120 x 10 9.420
120 x 12 11.300
120 x 20 18.840
120 x 25 23.550
130 x 5 5.100
130 x 6 6.120
130 x 8 8.164
130 x 10 10.210
130 x 12 12.250
130 x 15 15.310
130 x 20 20.410
Lengths available from 6.000 metres.
* denotes from 4.000 metres.FLATS
Certified to British & European Standards
Size Kg/m Size
180 x 50 70.600 300x I5 35.330
200 x 6 9.420 300 x 20 47.100
200 x 8 12.600 300 x 25 58.880
200 x 10 15.700 300 x 30 70.650
200 x 12 18.840 300 x 40 94.200
200 x 15. 23.600 300 x 50 117.750
200 x 20 31.400 350 x 10 27.480
200 x 25 39.300 350 x 12 33.000
200 x 30 47.100 350x IS 41.210
200 x 40 62.800 350 x 20 54.950
200 x 50 78.500 350 x 25 68.690
220 x 6 10.360 350 x 30 82.430
220 x 8 13.820 350 x 40 109.900
220 x 10 17.300 400 x 10 31.400
220 x 12 20.720 400 x 12 37.680
220 x 15 25.910 400 x I5 47.100
220 x 20 34.540 400 x 20 62.800
220 x 25 43.200 400 x 25 78.500
250 x 6 11.800 400 x 30 94.200
250 x 8 15.700 400 x 40 125.600
250 x 10 19.600 450 x 12 42.390
250 x 12 23.600 450 x 20 70.650
250 x 15. 29.440 450 x 25 88.310
250 x 20 39.250
250 x 25. 49.100
250 x 30 58.880
250 x 40 78.500
250 x 50 98.130
300 x 6 14.130
300 x 10 23.600
300 x 12 28.300
Lengths available from 6.000 metres.PLATES
Certified to British & European Standards
Thickness mm Standard Size Kg/m*
iB 2000 x 1000 23.55
2500 x 1250
3000 x 1500
3050 x 1525
4000 x 2000
4 2000 x 1000 31.40
2500 x 1250
3000 x 1500
3050 x 1525
4000 x 2000
5 2000 x 1000 39.25
2500 x 1250
3000 x 1500
3050 x 1525
4000 x 2000
PLATES
6 2000 x 1000 47.10
2500 x 1250
3000 x 1500
3050 x 1525
4000 x 2000
6000 x 2000
5000 x 2500
8000 x 2500
8 2000 x 1000 62.80
2500 x 1250
3000 x 1500
3050 x 1525
4000 x 2000
6000 x 2000
5000 x 2500
8000 x 2500
6000 x 3000
10000 x 3000
All material up to and including 4000 x 2000 x 12.5
sold on weighed weight basis.PLATES
Certified to British & European Standards
Thickness mm
10
Standard Size
2000 x 1000
2500 x 1250
3000 x 1500
3050 x 1525
4000 x 2000
6000 x 2000
5000 x 2500
8000 x 2500
6000 x 3000
10000 x 3000
Kg/m*
78.50
12.5
2000 x 1000
2500 x 1250
3000 x 1500
3050 x 1525
4000 x 2000
6000 x 2000
5000 x 2500
8000 x 2500
6000 x 3000
10000 x 3000
98.12
All material up to and including 4000 x 2000 x 12.5
sold on weighed weight basis.
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 2000
6000 x 2000
5000 x 2500
8000 x 2500
6000 x 3000
10000 x 3000
117.80PLATES
Certified to British & European Standards
Thickness mm
Standard
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 2000
6000 x 2000
5000 x 2500
8000 x 2500
6000 x 3000
10000 x 3000
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 2000
6000 x 2000
5000 x 2500
8000 x 2500
6000 x 3000
10000 x 3000
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 2000
5000 x 2500
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 2000
5000 x 2500
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 2000
5000 x 2500PLATES
Certified to British & European Standards
Thickness mm Standard Size Kg/m?
40 2000 x 1000 314.00
2500 x 1250
3000 x 1500
4000 x 2000
5000 x 2500
45 2000 x 1000 353.25
2500 x 1250
3000 x 1500
4000 x 2000
5000 x 2500
50 2000 x 1000 392.50
2500 x 1250
3000 x 1500
4000 x 2000
5000 x 2500
60 2000 x 1000 471.00
2500 x 1250
3000 x 1500
4000 x 2000
65 2000 x 1000 510.25
2500 x 1250
3000 x 1500
4000 x 2000
70 2000 x 1000 549.50
2500 x 1250
3000 x 1500
4000 x 2000PLATES
Certified to British & European Standards
Thickness mm Standard Size Kg/m?
80 2000 x 1000 628.00
2500 x 1250
3000 x 1500
4000 x 2000
90 2000 x 1000 706.50
2500 x 1250
3000 x 1500
4000 x 2000
100 2000 x 1000 785.00
2500 x 1250
3000 x 1500
4000 x 2000
120 2000 x 1000 942.00
2500 x 1250
3000 x 1500
4000 x 2000
130 2000 x 1000 1020.50
2500 x 1250
3000 x 1500
4000 x 2000
150 2000 x 1000 1177.50FLOOR PLATES
Certified to British & European Standards
Thickness mm O/P
Size mm
Kglm*
3.0
2500 x 1250
29.19
45
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 1750
4000 x 1830
37.97
6.0
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 1750
4000 x 1830
6000 x 1830
49.74
8.0
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 1750
4000 x 1830
65.44
10.0
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 1750
4000 x 1830
81.14
12.5
NB. Thickness is measured on the plain of the plate.
All above material sold on weighed weight basis.
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 1750
100.77HOT ROLLED SHEETS
Thickness mm Size mm
1.6 2000 x 1000 12.56
2500 x 1250
3000 x 1500
2.0 2000 x 1000 15.70
2500 x 1250
3000 x 1500
25: 2000 x 1000 19.63
2500 x 1250
3000 x 1500
COLD REDUCED SHEETS
08 2000 x 1000 6.28
2500 x 1250
1.0 2000 x 1000 7.85
2500 x 1250
12 2000 x 1000 942
2500 x 1250
1.6 2000 x 1000 12.56
2500 x 1250
3000 x 1500
2.0 2000 x 1000 15.70
2500 x 1250
3000 x 1500
3.0 2500 x 1250 23.55
GALVANISED SHEETS
08 2000 x 1000 6.28 os
2500 x 1250 Ee
lu
1.0 2000 x 1000 7.85 ca
2500 x 1250 wv
12 2000 x 1000 9.42
2500 x 1250
16 2000 x 1000 12.56
2500 x 1250
All above sold on weighed weight basis.STRUCTURAL HOLLOW
SECTIONS - SQUARE
Certified to British & European Standards
Size mm Kg/m Metres/Tonne
20 x 20 x 2.0 1.12 893
x25 135 7A4l
25 x25:2.0 1.43 699
x25 1.74 575
x 3.0 2.04 490
x32 215 465
30 x 30x25 2.14 467
x30 251 398
x 3.2 2.65 378
40x 40x25 2.92 342
x 3.0 3.45 290
32 3.66 274
x40 446 225
x 5.0 5.40 185
50x 50x25 B21 270
x 3.0 4.39 228
3:2 4.66 215
x40 5.72 175
x 5.0 6.97 144
x 63 8.49 118
60 x 60 x 3.0 5.34 187
x32) 5.67 177
x40 6.97 144
x 5.0 8.54 118
x 63 10.50 955)
x 8.0 12.80 78.1
70 x 70 x 3.0 6.28 159
x 3.6 7A6 135
x 5.0 10.10 99.1
x63 12.50 80.4
x 8.0 15.30 65.3STRUCTURAL HOLLOW
SECTIONS - SQUARE g
Q
Certified to British & European Standards 5
Size mm Kg/m Metres/Tonne
80 x 80 x 3.0 7.22 139 9
x36 8.59 117 3
x 5.0 11.70 85.5 =
x 6.3 14.40 69.5
x 8.0 17.80 56.1
90 x 90 x 3.6 972 103
x 5.0 13.30 75.2
x 63 16.40 6!
x 8.0 20.40 49.2
100 x 100 x 4.0 12.0 83.4
x 5.0 148 67.6
x 6.3 18.4 54.4
x 8.0 29 43.7
x 10.0 279 35.9
120 x 120 x 5.0 18.0 55.6
x 63 23 44.9
x 8.0 279 25.9
x 10.0 34.2 29.3
x 125 416 24.1
140 x 140 x 5.0 201 474
x 63 263 38.0
x 8.0 329 30.4
x 10.0 40.4 243
x 125 495 20.2
150 x 150 x 5.0 27 44.1
x 63 28.3 35.4
x 8.0 35.4 28.3
x 10.0 43.6 23.0
x 12.5 53.4 18.8STRUCTURAL HOLLOW
SECTIONS - SQUARE
Certified to British & European Standards
Metres/Tonne
180 x 180 x 6.3
x 8.0
x 10.0
x 125
x 16.0
200 x 200 x 6.3
x 8.0
x 10.0
x 125
x 16.0
250 x 250 x 6.3
x 8.0
x 10.0
x 125
x 16.0
300 x 300 x 10.0
x 125
x 16.0
350 x 350 x 10.0
x 12.5
x 16.0
400 x 400 x 10.0
x 125
x 16.0STRUCTURAL HOLLOW
SECTIONS -
RECTANGULAR
Certified to British & European Standards
Size mm Kg/m Metres/Tonne
50x25 2.5 272 368
x 3.0 3.22 311
x32. 341 293
50x 30x25 292 342
x30 3.45 290
x32 3.66 274
x 4.0 446 225
x 5.0 5.40 186
60 x 40x25 371 270
x 3.0 4.39 228
x32 4.66 215
x 4.0 B72. 175
x 5.0 6.97 144
x 63 8.49 118
76.2 x 50.8 x 3.2 6.02 166
x40 TAI 135
x49 8.93 112
x 63 11.20 89
80 x 40 x 3.0 5.34 187
xa:2 5.67 177
x 4.0 6.97 144
x 5.0 8.54 118
x 6.3 10.50 95.5
x 8.0 12.80 78.1
90 x 50 x 3.0 6.28 159
x 3.6 7A6 135
x 5.0 10.10 99.1
x63 12.50 80.4
x 8.0 15.30 65.3STRUCTURAL HOLLOW
SECTIONS -
RECTANGULAR
Certified to British & European Standards
Size mm Kg/m Metres/Tonne
100 x 50 x 3.0 675 148
x32, 7.18 140
x 4.0 8.86 113
x 5.0 10.90 918
x 63 13.40 747
x 8.0 16.60 60.3
100 x 60 x 3.0 7.22 139
x 3.6 8.59 117
x 5.0 11.70 85.5
x 63 14.40 69.5
x 8.0 17.80 56.1
120 x 60 x 3.6 972 103
x 5.0 13.30 75.2
x 63 16.40 61.0
x 8.0 20.40 49.2
120 x 80 x 5.0 14.80 67.6
x 6.3 18.40 54.4
x80 22.90 437
x 10.0 27.90 35.9
150 x 100 x 5.0 18.70 53.7
x 6.3 23.30 43.0
x 8.0 29.10 344
x100 35.70 28.1
x 125 43.60 23.0
160 x 80 x 5.0 18.00 55.6
x 6.3 22.30 449
x 8.0 27.90 35.9
x 10.0 34.20 29.3
x 125 41.60 24.1STRUCTURAL HOLLOW
SECTIONS -
Certified to British & European Standards
Size mm Kg/m Metres/Tonne
200 x 100 x 5.0 22.70 44.1
x 63 28.30 35.4
x 8.0 35.40 28.3
x 10.0 43.60 23.0
125. 53.40 18.8
250 x 150 x 6.3 38.20 26.2
x 8.0 48.00 20.9
x 10.0 59.30 16.9
x 125 73.00 13.7
x 16.0 91.50 11.0
300 x 200 x 6.3 48.10 20.8
x 8.0 60.50 16.6
x 10.0 75.00 13.4
x 125 92.60 10.8
x 16.0 117.00 8.55
400 x 200 x 10.0 90.70 Ih
x 125 112.00 8.93
x 16.0 142.00 7.05
450 x 250 x 10.0 106.00 9.44
«125 132.00 7.58
x 16.0 167.00 5.99STRUCTURAL HOLLOW
SECTIONS - CIRCULAR
Certified to British & European Standards
Size mm Metres/Tonne
21.3 x32 700
26.9 x 3.2
33.7 x26
3.2)
x 4.0
424x26
x 3.2
x 4.0
48.3 x 3.2
x40
x 5.0
60.3 x 3.2
x 4.0
x 5.0
76.1 x 3.2
x 4.0
x 5.0
88.9 x 3.2
x 4.0
x 5.0
114.3 x 3.6
x 5.0
x 63
139.7 x 5.0
x63
x 8.0
x 10.0
168.3 x 5.0
x 63
x 8.0
x 10.0STRUCTURAL HOLLOW
SECTIONS - CIRCULAR
Certified to British & European Standards
Metres/Tonne
193.7 x 5.0
x63
x 8.0
x 10.0
x 125
ELECTRIC RESISTANCE
WELDED TUBES
th" x th" x log 0.531
3/4" x 3/4" x 18g 0.663
3/4" x 3/4" x log 0.856
I" x I" x 18g 0.906
"x I" x l6g 1.181
1/3" x 1/4" x 16g 1.506
Ih" x Hh" x 16g 1.831
2" x I" x log 1.812
5/a" o.d. x l6g 0.573
3/4" od. x 16g 0.700
"" od. x l6g 0.956
1/4" od. x log 1.211
Ith"o.d. x log 1.466
Available in 6.100 metre lengths.BS 1387 STEEL TUBES -
BLACK
Nominal
Bore Brown.
Light
kg/m
Blue
Medium
kg/m
Plain or Screwed Ends
Red
Heavy
kg/m
Screwed & Socketed
Brown
Light
kg/m
Blue
Medium
kg/m
Red
Heavy
kg/m
0.360
0.517
0.674
0.953
1.403
2.010
2.574
3.260
4.107
5.804
6.818
9.881
0.406
0.650
0.853
1223
1.577
2441
3.141
3.617
5.090
6.517
8.467
12.114
16.221
19.198
0.494
0.770
1.020
1.454
1.890
2.977
3.841
4434
6.160
7.904
10.061
14.451
17.858
21.282
0.364
0.520
0.680
0.960
1.420
2.024
2.603
3.303
4.180
5.924
6.980
10.181
0.410
0.653
0.860
1.233
1.593
2.457
3.170
3.661
5.164
6.637
8.631
12411
16.668
19.796
0.497
0.773
1.027
1.463
1.903
2.990
3.870
4.481
6.238
8.021
10.224
14.748
18.305
21.875
BS 1387 STEEL TUBES -
GALVANISED
Nominal
Bore
Plain or Screwed Ends
Screwed & SocketedBRIGHT STEEL ——
Certified to British & European Standards
Specifications: | BS 970
En3B
EnlA
En8
Enl6T
Enl9T
En24T
O80AI5
070M20
220M07
080M40
605M36
709M40
817M40
Rounds
Squares
Hexagons
3mm to [80mm
1/8" to 10"
6mm to 90mm
1/8" to 6"
l0mm x 3mm to
200mm x 6mm
T2E x18" to! 1285.2"
6mm A/F to 70mm A/F
0.192" A/F to 3.150" A/F
Cutting service available
TUBES/BRIGHTS“EXPAMET”
EXPANDED METAL SHEETS
2489F Flat Mesh
2073F Flat Mesh
2074F Flat Mesh
2077F Flat Mesh
1584F Flat Mesh
1280F Flat Mesh
2089 Raised Mesh
3396 Raised Mesh
4896 Walkway Mesh
2496 Walkway Mesh
1194TGC Grain Dryer Mesh
All sizes stocked in 2440 x 1220 size.
Sizes not listed available on short lead times.
OPEN MESH FLOOR PANELS
Designation =
41-100 6000 x 1000
41-100 6000 x 1000
41-100 6000 x 1000
41-100 6000 x 1000
31-100 6000 x 1000
Flooring Panels, Self Colour or Galvanised.
Fixing Clips to suit all panels available ex stock.
Handrail Systems and Stair Treads available on short lead times.REINFORCEMENT FABRIC
é Weight pe:
A98 18
26
35
46
7|
Standard Sheet Size 4.8 x 2.4 metres,
Also available for prompt delivery in following
additional sizes, details on application -
BS Ref. ‘B’ STRUCTURAL FABRIC
“c’? LONG MESH FABRIC
“D’ WRAPPING FABRIC
SELF COLOUR WELDMESH
Specification Sheet Size
"x I" x 12 SWG. 8'0" x 4'0"
2" x 2" x 10 SWG. 80" x 4'0"
3" x th" x 10 SWG. 80" x 4'0"
Other sizes available on short lead times. Details on request.
a
Ag REINFORCEMENT/FLOORINGGAUGE TABLE
Gauge SWG
Gauge in
0.160
0.144
0.128
0.116
0.104
0.092
0.080
0.072
0.064
0.056
0.048
0.040Conversion Formulae
To Convert Multiply By
Length
Inches to Centimetres 254
Centimetres to Inches 0.3937
Feet to Metres 0.3048
Metres to Feet 3.2808
Miles to Kilometres 1.6093
Kilometres to Miles 0.6213
Area
Sq Inches to Sq Centimetres 6.5416
Sq Centimetres to Sq Inches 0.155
Sq Feet to Sq Metres 0.0929
Sq Metres to Sq Feet 10.7639
Sq Miles to Sq Kilometres 2.5899
Sq Kilometres to Sq Miles 0.3861
Acres to Hectares 0.4046
Hectares ta Acres 2471
Volume
Cu Inches to Cu Centimetres 16.387
Cu Centimetres to Cu Inches 0.06102
Cu Feet to Cu Metres 0.02831
Cu Metres to Cu Feet 35.3147
Capacity
Gallons to Litres 4.5460
Litres to Gallons 0.2199
Weight
Ounces to Grams 28.3495,
Grams to Ounces 0.03527
Pounds to Grams 453.29
Grams to Pounds 0.002204
Pounds to Kilograms 0.45359
Kilograms to Pounds 2.2046
Tons to Kilograms 1016.0469
Kilograms to Tons 0.000984
C é Our products are CE marked where applicable.
More than Steel
www.bmsteel.co.uk
All weights and conversions in this publication have been offered as a
guide only. B+M accepts no responsibility for their use.ABERDEEN
Cloverhill Road, 1, Bridge of Don Ind. Est.
"ABERDEEN AB23 8FE
701224702771 F:01224 826 227
aberdeen@bmsteel.co.uk
BANGOR
Bangor Station Yard, Caernarfon Road
BANGOR, Gwynedd LL57 2TX
1: 01248 364041 F:01248 353 100
_ bangor@bmsteel.co.uk
BROWNHILLS
Building A, Coppice Side
Industrial Estate, West Coppice Road,
BROWNHILLS WS8 7EX
T:01543 360710 F:01543 361 642
- brownhills@bmsteel.co.uk
CHEADLE
- Duke Avenue, Stanley Green
- Ind Estate, Cheadle Hulme, Cheshire
CHEADLE SK8 602
T:0161 485 8535. F: 0161 485 7804
cheadle@bmsteel.co.uk
EDINBURGH
CBC. House, 24 | Canning Street
EDINBURGH EH3 8BB
7: 0131 2722743 F:0131 272 2843
edinburgh@bmsteel.co.uk
CHORLEY
Unit 1 Eaton Avenue,
Matrix Park, Buckshaw Village
CHORLEY PR7 7NA
7:01772.459111 F:01772 459 222
chorley@bmsteel.co.uk
GLASGOW
Shieldhall Works, Hardgate Road
GLASGOW G51 4TB
T0141 4452591 F:0141 445 6964
glasgow@bmstee!.co.uk
0078 0616
LIVERPOOL
Byng Street/Seymour Street
Bootle. LIVERPOOL 120 1EE
T:0151 922.4265 F:0151 9220400
liverpool@bmsteel.co.uk
MORECAMBE
Unit 2, Middlegate, White Lund Ind. Est.
MORECAMBE LA3 3BM
701524 67241 F: 01524382641
morecambe@bmsteel.co.uk
NOTTINGHAM
Basford Works, Arnold Road,
NOTTINGHAM NG6 OEF
7.0115 9701171 F:0115 9422181
nottingham@bmsteel.co.uk
PETERBOROUGH
Oxney Road, Eastern Industry,
PETERBOROUGH PET 5YW
T: 01733312921 F:01733 343 386
peterborough@bmsi
SITTINGBOURNE
1-5 Millen Road, Sittingbourne
KENT ME10 280
T-01795 293 104 F:01795 410416
kent@bmsteel.co.uk
SHEFFIELD
298 Coleford Road, Darnall.
SHEFFIELD $9 5NF
T0114 2442094 F:0114 243 5965
sheffield@bmsteel.co.uk
WINCHESTER
Unit 30, Moorside Road
WINCHESTER $023788
t 01962 848 050 F:01962 850442
winchester @bmsteel.co.uk
Barclay
& Mathieson
_bmsteel.co.uk
More than steel