Professional Documents
Culture Documents
STRAIGHT CONICAL SPHERICAL.
Hub Pilotes Stud Piloted Stud Piloted
Diameter
Angle
Spherical
Conical
Inside External
Double Side
Stud Diameter 4U-
M Hub Centring
B Blot Centring
AType E TypeWHEEL CENTERING SYSTEMS
‘The common types of mounting systems are Stud piloted, Hub
piloted and Double piloted,
STUD CENTERED WHEEL
‘Stud centered system uses the studs on the wheel hub to guide
and center the wheel. Chamfered bolt holes identify a stud
gus centered wheel. These wheels are designed tobe centered by
: oun conical or spherical nuts on the studs.
4 Nut Hub centered systems use the actual wheel hub to guide and
5 Bolt center the wheel. Hub centered wheels generally have straight
bolt holes with no bal sea for nuts wit at washer {lange nuts]
This feature provides a visual way of hub piloted wheels. These
wheels require narrow tolerance of center hole dimensions
Double centered mounting systems use both wheel hub and
studs fo guide and center the wheel. These wheels have bolt
holes with countersinks together with center hole wth a narrow
eHub tolerance. They mostly use spherical or conical nuts, but ange
dorm UtS like for hub-centered wheels can be also used
Otte Itisimperativeto use right components for each ype of mounting
& Nut and to fit wheels to the proper hubs. Mixing components of
Sel different mounting systems can lead to breaking of studs,
decrease of torque, cracks on wheels and eventually wheet
slippage.
(asa
One of the most important dimensions of the disc wheel is Offset. As per JANTSA classification offset is
a dimension from imaginary rim center line to outer disc surface, Disc wheel offset can be positive, negative
or so-called “O-offset’, please see pictures below for explanations.
Positive Offset offset Negative Offset,
For dual mounting applications Offset equals to “half dual spacing”. Dual spacing is a distance between imaginary
center lines of two rims in dual mounting. Values of tire clearance, overall vehicle width of tires, vehicle clearance
and in some cases overall vehicle width are determined by value of dual spacing. Therefore, values of minimum
dual spacing are regulated by a number of standards, including ETRTO and TR&A, Another measurement, commonly
used by many manufacturers is Offset ET (from German “Einpresstiefe” or so-called “inset”) which is a dimension
from imaginary rim center line to inner disc attachment surface. Difference between value of Offset and Offset ET
equals disc thickness of the wheelSAFETY & MOUNTING RECOMMENDATIONS
It is important to handle wheels with maximum care, and pay special attention to its safe usage, mounting,
demounting and service. Users have to follow all conditions and norms according to industry, national and
international regulations. As JANTSA we will try to point out just those which we consider as the most common
and important.
Before servicing, disc wheels have to be checked for following possible damages:
* Cracks on the dise and/or rim
‘© Asymmetric shape of disc contact surface
'* Deformed [damage, burr, excessive corrosion etc] stud holes
'* Deformed [damage, burr, excessive corrosion etc] flanges
* Excessive corrosion
* Excessive wear
'* Damaged rings of multi-piece wheels
Using wheels/components under these conditions is strictly forbidden. Damaged parts should be replaced.
While mounting the wheel on a hub you have to ensure that all surfaces are clean, free from rust and deposits.
Elements of different mounting types should not be confused, since this may result in loss of torque, disc surface
cracks, bolts and studs damage, and loss of wheel. Applied torque level should correspond to instructions of
vehicle manufa
of nuts on the wheel has to be checked 100 km after first installation and regularly during usage.
rer. Nuts installation has to be done crosswise, with gradual increase of tarque level. Tightening
Mounting and Demounting of tire on the wheel has to be done by qualified personnel in well-equipped service
points, according to specifications and procedures stipulated by ETRTO, TRA and other industry, national and
international regulations. You have to ensure that all surfaces are clean, free from rust and deposits, Itis crucial
to match properly wheel and tire sizes according to above mentioned standards and recommendations of the
vehicle manufacturer. Mismatch can result in serious damages and injuries. Diameter shown on the tire should
exactly match the diameter stamped on the rim/wheel. Tires must be completely deflated before demounting
wheel, or components of the wheel from the vehicle. Avoid standing in front of multi-piece wheels during assem
bly: damaged components might spring off.
Mixing components of various manufactures may result in fatal injuries, therefore only matching parts of one
manufacturer and one wheel system can be assembled.
Repair or of steel wheels is strictly prohibited.
Especially dangerous is:
© Welding of rims or wheels CI
dholes
© Repair of damaged
‘© Repair of deformed center hole k=
® Straightening of disc contact surface i 7
==
SE
JANTSA does not bear obligation under warranty for goods if they were modified, repaired or processed. This
instructions should be used only as a guide and can not be the only source of information of safety information
on wheels.aU)
RYN glae ai
pe sca
VEHICLES
ate Recs
Freee =
erin caleBAU] =] 1M soe LOLA alates cea) Ve olga otc)
Meee (alee eR seco) NE
eyes rc
Tea Rs ert
Biss 4 oa
525100
asim 61 25 n2 ‘ a 1600
75525 77S 251080 208 85 5 15 300
sasita 1% z 10 6
s2si11 us a2 5 Ms
soov00 “1 205 ‘ 20
eRirs
soa) 16 ns 10 2
sooroz us 00h 17
asri7s
soos 82 6 om
soot 50 as 3 28
9Ri75
17.56.00 ours tae a ‘ 28
soos ue
coi, taka ‘
a sore ems 5
nsmsai1s sors) 15008 5 ts
forme at tim = 2200
sri7sarst00= OS ‘ 2200
ot ms 58 ‘0 7s
ms
109252 AISMm = 2150
eer sos 2150
8 Ow so ms
i finn 15 2790
esis) 76 finn 10S 250
. ois GUY soa 8 250
ae 75181 165.1 222.25 3 7B 10 2500
aaMsRIIS 6 TS ue 2550
imeaos ws tsi at eC 2200
T7Se1400 400/45 L178 140175 221 25 2 8 ° 3800Bi0) =] 1m ts LOLA pe) ee sel) Ven lg Oo oy
BE Oso ase) aa nN
JanTSAPART| CENTER Peta tascam ar)
Pi ec oR tt a
CEP Natal aie BUON SAMI | Imm)
2SITOR TES 50297 220 288.75 826mm, 0 156, 2400
Wes 750362 220 285.75 826mm 10 162.5, 3050mV] =] 1m sso LOLA alle) ere) ais cea) Vee ol ocd
ee Eons iam
iD Tene JANTLAR
fers en Te tae oleae
- a al (mm)
— = oe
ee ee eo
13R25 700250 281 935, Bs 10 175 4000
YBi0) =] 1m ts LOLA pe) ee sel) Ven lg Oo oy
BEN CU s (oli se) Rtt aa TS
Ole Tl ey-)
Fa
4
|
H
TECHNICAL SPECIFICATIONS / TEKNIK OZELLIKLER
ee
asim /S25 uous 20 T8575 tlnm 19h) 50
34
TECHNICAL SPECIFICATIONS / TEKN
17.5x6.00
6.75X17.5
22.5X7.50
22,5X8.25
22.5X9.00
6.0-15
65-15
70-15
75-15
65-20
7.0-20
75-20
8.0-20
80-22
85-20
8.0-26
85-26
600900
675900
750900
825900
825901
825902
900900
(00901
0250
0252
0254
0256
01207
0257
077:
0468
01243
0794
0467
0516
100
115
120
107
120
120
127
K OZELLIKL
TRS72
R572
3.14.3
V3.14.3
TRS73
TR573
V3.14.3
TRS74
750-15
825-15
900-15
1000-15
825-20
900-20
1000-20
1100-20
1100-22
1200-20
1100-24
1200-24Fa
Ay iabee i
yaa
ea
Penal Tae
M] Uh
las eae Peru f
Genls eo j
| f
i500415
o.Bx15
Lexis
oLbx15
r3LBx15
00x53
3K155
wont
wists
Wnts
wioxte
13417
6x07
700-15
700-15
750-15TR
225/70815,
235/70R15,
290125 -15,
29135 -15,
six3 5-15
394155 -15
rasieo=183
4o0/é0-15.5
215/65 -16
230/80- 16
10.5/65-16
2730/8016
11.0-1654
150055-17
1965-17
48.0108-17
15500
15600
15601
15800
1580
15802
10150
1018
10154
13150
13152
13155
13157
91531
91598
91548
130055
130056
16600
16603
16604
16782
16807
eat
16819
e010
130170
140170
TECHNICAL SPECIFICATIONS / TEKN:
923
143
19085
15
15
1175
oo
%
938
4
aie
174
1235
161
61
0
161
161
1429
42
oo
1524
10
8
161
ua
161
11
wT
1524
213
ma
165
152.4
150
140
M0
uo
21a
1524
18.1
205
205
105
205
205
184.1
184.1
150
2032
160
100
205
1524
205
205
porary
aorsnssht
asrisinaao
175mm
615.5mm
‘15mm
817.5mm
615.8mm
re
ro
16mm
ra
n
217/25.4/90°
£155
arrzpaisinas
at
at
n
B
ra
n
Inset 29
65
°
°
Inset 215
Negative 42
Negative 15
Inset St
Inset 20
Inset 50.5
Negative 65
°
Negative 70
°
15
°
Negative 35
218
28
Inset 52
88
°
%
°
zsTECHNICAL SPECIFICATIONS / TEKNIK OZE
175x675
175x105
17.5«14.00,
oma
1x18
13318
1954750
1958.25
1951.75,
195x13.00,
195x140
20
11920
13920
16x20
9RITS
95RI75
10R175
215/75 RTS
225/75 R175
235/75 R175
14RI7S
00/65 L175
10.5/80-18,
12:5/80-18,
13.0/65-18
15:5/70R18
45/7018
SR 195
1oRI95
sR I95
245/70819.5
265/708 19.5
TRIS
285/70 R195
15RIS
425165 8 195
445/658 195)
s00/70R20
13/80R20
suaye0R20
375/75R20
335/80520
5345/8020
42065820
2075820
425775820
16/70-20
‘44o/65R20
675108
o7s139
ensue
ors
orste2
e7sm08
105175
10817
105172
140175
10934
18735
19945
11189
11190
11304
318
13190
s0i%e
750195
750201
225100
825101
111953
111954
131961
131962
141956
141957
141996
92014
92026
20126
20126
20s
20160
20142
20168
1421
ais
2
waa
z
mm
202
2
a
za
za
2
161
am
161
2
1
za
11
161
za
161
2
za
161
za
16
2
161
za
2
205
zai
za
2
161
LIKLER
205;
25
1651
25
ama
213
25
25
78
28
205
a5
205
28
5
205
28
205
28
215
205
75
25
25
205
x5
205,
25
25
a5
75
28
205
2
eB
n
2
a74
n
ry
n
n
n
821 Soe
n
22
azygos
22
n
x
x
n
ro
n
n2
n
2
n2
n
n
8
n2
n
ea
n
fa
ass
ro
ry
nm
12
0
11
0
5
°
0
o
Negative 265
0
o
0
°
o
o
°
a
0
°208x16.00
205x16.00
225750
2518.25
225%9.00
250195
225303.00
22501400
1600025
2002s
rons
4g5(65R205
525/65R20.5.
24R00.5
275/80 R225
R28
275/80R22.5
29/80822.5
15/70822.5
12R25
19R225
295/80822.5
5R225
365/70872.5
335/65R225
1658225
425/88R225
1eR225
465/65R225
550/60-22.5
so0yas-22.8
00/39-22.8
50/50R-22.5
oo/s0-225,
205148
205146
205160
205180
780201
750202
825204
225205
225226
so02t
00212
0024
117559
117560
11756
117579
130224
190229
130245,
40716
140219
142295
623
142328
142302
162364
200225
200227
200208
40225
249226
26024
028
TECHNICAL SPECIFICATIONS / TEKN.
221
2a
281
zai
21
161
161
za
1824
161
za
za
za
zi
11
za
za
161
za
Ea
81
a1
a1
161
21
za
a1
71
za
za
za
7a
781
25
25
205
m5
275
205
205
28
2032
205
75
28
ed
75
208
208
25
205
as
25
5
395
295
205
25
2
ed
m5
28
78
335
a8
a5
a
a
26mm
ex
”
x
e-srrie290"
22
x
ni
ea
n
n
x
ex
6
OZELLIKLER
0
0
inset 70,
0
0
Inset 50,
o
Negative 50
0
Negative 50
Negative 100
0
0
Negative 100
Negative 50TECHNICAL SPECIFICATIONS / TEKNIK OZELLIKLER
1.00428
Dwi62s
wie
24,848.25,
24.5413.00
w208326
w2sex26
mmo0a6s
24,000265
23.000265
bwreLxa0
mm00a05
2400005
2.00005
bwatexa2
wares
wa0Bx32
waexa2
wyws0838
Dwraxae
Mw2aBa8
Mw25Bx38
bwaex38
bwraLe42
wae?
w2ee%42
wwa0Bx4
30/21 88-23,
1950-26
2050-24
Rms
TRUS
78.10-26
261-26
22L-26
30.501-26
00755-2855
7o0/50-265
005-265
s00/70R30
600/55-30.5
s00/60-30.5
50/0-30.5
700/50-20:5
750 /60-30.5
s00/¢5-30.5
800/55-30.5
850/50-30.5
24 R82
oso/roR2
osoy7sR32
a0s.a2
sooyssR2
a5.5Rx92
1os0/soRs2
s00/60Rs8,
490/70R38,
noproR3E
‘moyroRs,
900/60R38
mat
‘mojroRe2
s00/s0R«2
190230
1026
18026
18025
248825
248130
20260
20266
75260
25265
200287
200270
200271
240265
260286
240287
240278
0265
280275
0800
20007
200i
00313
240205
269912
240318
20306
20007
20012
230313
21920
21921
21326
27320
m3
zr
0320
6320
22380
25380
7320
231
a
221
2
1524
221
2a
ma
a1
2
za
za
231
za
2a
a1
2
za
ma
221
za
2a
731
2
2a
2a
2
za
2a
za
2a
2a
ma
231
za
za
a8
2
600.28
ona
ea
285 A
oo n
25 2
8 2
203.2 sorsaenoars
335 sammnsinns
395 x
28 »
25 a
25 ”
2 2
295 x
25 a
8 2
25 x
25 a
25 ”
335, ry
28 2
a8 a
28 n
25 x
25 a
75 ”
395 x
25 x
275 2
8 n
88 x
295 a
395 4s
395 x
238.75 22m
25 a
395 x
28 x
2s £24,5mm
215 528mm
COMING SOON
652 220mm
8a 622mm
COMING SOON
sa 622mm
COMING SOON
16
20
20
0
0
°
Negative 50
Negative 38
o
Negati
0
Negative 100,
Negative 50
Negative 50
°
Negative 50
0
Negative 50
Negative 100|
o
Negative 100
0
o
°
Negative 30
Inset 100
°
Negative 80
Inset 50
Negative 100
°
Negative 50
o
Negative 50
Inset 41
0
Negative 30
Negative 76
0
Inset 11
10820)
GENERAL CONDITIONS OF SALE
OFFERS
Unless otherwise stated, offers from JANTSA are valid for 30 days from the date of issue.
Offers from JANTSA are confidential and are not to be passed on to third parties.
ORDERS
Orders transmitted to JANTSA shall be written and either sent via mail, fax, or e-mail, Verbal orders
will not be considered binding,
Ifa buyer transmits a written arder to JANTSA or if JANTSA transmits a written quotation to the Buyer
constituting an offer stating price, amount and terms an official order will only come into existence
when the Buyer accepts JANTSA's offer by returning a signed confirmation.
Orders of any kind can neither be cancelled nor altered 14 days after their confirmation by JANTSA.
Alterations will be allowed only by a revised confirmation by JANTSA which must be re-confirmed by
the Buyer.
PAYMENTS.
‘The payment of invoices must be remitted via direct deposit to the Seller's bank within the terms and
conditions stated on the final official order.
Late payment will incur mimimun 1% interest per month over the agreed terms of payment.
In case of claims and complaints put forth, the Buyer will not put a hold on any invoice and/or past due
payments untess by prior agreement with the Seller.
CLAIMS
JANTSA will only consider claims after receiving and/or checking the defective goods or the viewing
photo's of wheels [if enough to confirm) within 3 months after the complaint is lodged. Other than
defects in workmanship and materials, JANTSA will not accept responsibility for any improper uses
which do not conform to the specifications indicated in the catalogue,
DELIVERY TERMS
Delivery Terms will be indicated in every written contract between Buyer and JANTSA.
Delivery Terms stated in JANTSA’s offers and/or acknowledgements are not guaranteed and may vary
under certain circumstances. JANTSA will not be deemed responsible for any delay in delivery if caused
by circumstances beyond their control including but not limited to machinery breakdown, labor problems
and/or clauses of force majeure. Claims for such delays shall not entitle the Buyer to cancel their order
‘on JANTSA or request credit from JANTSA for the delay.TECHNICAL SPECIFICATIONS / TEKNIK OZELLIKLER
6015 750-15 60800 i 2 6 ry 2150 o
asst 88 1% 24mm 135 2650 oo
65160 161 a2 é 0 2650 40
70-15 900-15 70156 1% Bs ma 000 o
75155 1% 225 26mm 185 3200 oo
7518 1000-15, i 5
75161 1% 225 26mm 10 ° 3200 “0
to ro —080 281 335 83 mus 2100 100
0252 toe 22225 85 ‘ 135 2100 100
65250 2 28 ea 8 150 2200 100
65.20 925-20 65255, 281 335 25mm me 2300 100
65262 281 335 25mm 1125 2400 80
70201 2 275 ai 8 157 2200 100
p02 seoz 70206 281 25 Ey 183 2600 100
mo216 za 25 82 8 7 2850 oo
m218 ae 285° 85 8 140 2400 100
78202 281 335 26mm 1s 00 100
75207 zw 78st 85 8 165 100
75-20 000-20 75214 281 335 25mm 160 100
75216 281 235 x 10 ° 100 100
“7sso0" 281 235 26mm 168 00 100
0201 281 335 26mm 172, 3250 100
0202 281 5 83 17 3250 100
80207 221 25 ea 8 ° 700 40
e020 © 100-20 e022 2a 25 cy 0 172 3250 100
soz) 2215 285.75 83 0 1% 3250 100
0213 21 1285 85 8 1m 3250 100
seoso0" 281 235 25mm 12 00 100TECHNICAL SPECIFICATIONS / TEKNIK OZELLIKLER
CT eT) 750 100
soz 2815 82 180 80 100
952037818052 = 17 750 100
a5-20 1200.20 952072128575 oo” 750 100
Fe 2 wo 180 100
ee ze] 82 m0 a0 0
ascot 815mm «= 2850 100
90-20 1200-20 90m) 2815 Om = a0 “a
vuooR20 1002012818 82 ost 00 100
1000-20 365/85R 20 100204 2 a AD a 0 5200 40
avs/e5R 20 10022228105 O2hmm = 500 100
woo R20 100288 = 281895 2Smm =k 200 “0
ro00v-20
qosercey 295/90R70 100237 781585 zimm = 18 000 “0
345/60R20 10078878195 2hmm =a 000 so
F302 1400-20 10030028195 2mm «1 eet 120 0
ia029 1400-20 110710 == «28385 2hmm «Dat 2060 10
AYR cvsese20 io 281mm = 000 0
40-22 1100R22 ands HS Bimm = 400 10
0021 e027 8K Imm =O 100 100
0% oo oma » 2 ms 000 0
rmooRz 8026 = 281 52mm =D 3800 100
rovR2 ase00" ae 85 83 180 500 100
852% ym. “ese 7815 Bm =D 500 100
yomR% *85802" 281 335 25mm 10180 4500 100RIM, RING & COMBINED RING MATCHING
PE
fe ty
COMBINED RING RIM BASE 2 PIECE
RIM BASE MARKINGS. COMBINED RING MARKINGS
Traceability Markings 7.080) Jants-Size-20"-0R-¥ear (01948)
Traceability Markings 8.5), “ants-Sie-20"-CR-¥oae (01176)
Traceability Markings 6.5), JantsaSie-26"-0R-¥ear (01144)
po)
(A
SIDE RING LOCK RING RIM BASE 3 PIECE
NOTCHED LOCK RING
(Em PIMBASEMARKINGS SIDE RING MARKINGS LOCKRING MARKINGS MARKINGS
Traceability Markings [L0-65-70) Jantse-SneT5"-SR-Yewr (0878) Jonsa-Size-15LRVer 01607] Jantse-Sine-15°-ARNVeor [01036]
Traceatity Markings 7.5), Yants-Sie-19°-SR-Yoor (011111 Jantsa-Size18"-LR-Yeor [01407] Jansa-Sze-18°-LRN-Yoar (01074
‘raeeabiityMarkings|0-85) Jantsa-Size-15™SR-Vear(01112]___Jantsa-Size-15°-UR-Year 01607] Jantsa-Sie-15"-LRN. Year 0109)
Traceabiy Markings 9.25) ntsaSize-3"-SR.Neor (0828) Jansn-Sze-15™-LRYer [01407] Jontsa-Size-15"-LRN-Yeor [01096]
Traceability Markings 10-65-70) Jantsa-Size20"-SR-Year (01110) Jansa-Size-20™-LR-Year 0799) Jansa-Size-20"-LRN Year [10931
Traceability Markings 75) Jantse-Size-15°-SR-Yeor (0758) Jantsa-Size-20"-LR-Year 0759) __Jantsa-Size-20"-LRN-Year (01093)
Traceabty Markings 80-85) JntsaSiro-3"-SR.Yoar (011131 Jansn-Sze-20"-LRYer 10789) Jantsa-Size-20"-LRN-Yosr 101093]
Traceability Markings 9.0) Jantsa-Size-15°-SR-Yoor(01113)Jantsa-Sie-20"-LR-Year 0759) Jantsa-Sze-20"-LAN-Year 01093)
Traceabity Markings 10.001 antso-Size-3"-SReYear(O1T13] Jansa-Sze-20™-LRYar [789] Jantse-Size-20"-LRN-Year [01093]
TracebityMarkings 11.00) Jnise-Sizo5"-SRYoar (01113) Jansa-Size-20"-LR-Year (0789) Jantsa-Size-20"-LRN-Year [1033]
“raeeaiity Markings (20) Janis-Sie-22"-SRear(O1286)_—_Jantsa-Sie-27"-LA-Year 0128
24
Traceabily MarkingSi60-85-10501 Jatse-Size20"-SRYeor (0789) Jansa-Size-26-LRYear 01115] Jansa-Sie-20"LRN Year [1068]
SIDE RING LOCK RING RIM BASE 3 PIECERIM, RING & COMBINED RING MATCHING
ci ° BASE MARKINGS SIDE RING MARKINGS LOCK RING MARKINGS
Traceability Markings 10.000-1.00 Janse-526-20"SRYar (975) Janse-526-20" Rear (974)
LOCK RING SIDE RING RIM BASE 3 PIECE
ci PIM BASE MARKINGS SIDE RING MARKINGS LOCK RING MARKINGS,
Traceabty Markings 1100) Jantsa-Sie-20"-SR-Yoor 077401173) Jantsa-Sie-20"-LR-Yoor 0759-01409)
az
Traceailiy Markings 5) Jantsa-Sige-25"-OR Near (01179) Janise-Sige-25"-LR-Year (01608)
Traceabity Markings [1000-1400) JantsaSio-25"-OR-¥oar (0114) Jants-Sie-25°-LR-Yoa (01608)
Tracebity Marking 12 JantsaSize-25"-CR Near (01724) “anta-Sine-25"-LR-Yen (0108)
Traceability Markings 17.00) Jantsa-Sie-25°-OR Hear (01179) ss-Sne-25LRYedr (1608)
PIECE RIM]
xa 6 Gr
a
CONICALRING SIDERING SECURITYRING — RIMBASE 4 PIECE
SECURITY RING CONICAL RING
fim FIMBASEMARKINGS SIDE RING MARKINGS MARKINGS MARKINGS.
“Traceabily Markings (6.5) Jase Sae-"-SR-Year(ONZ7) (85) Janse Size-26°-S9-ear (01141 (35) ants S2ze-26--CR-Year (011465
“Traceabiliy Merkings (0 “anseSize-20"-SRYeor 01145)(140) JontseSiae-26-SR-YeorIIT4T]Jansn-Sie-24-CR Yea (0148)
Reed
aa i
RIM BASE SIDERING LOCK RING BEAD SEAT
ea MARKINGS MARKINGS — MARKINGS MARKING DRIVER KEY
Traber a8 (1425-1700) 1880 [11.25-1825-17 00-95) _1829(17.25-1000-7.00-195) 1801 [1.25 1825-17.00-1985)
118.257.0019)
Tracbitty Markings 12200
e40 (2200-2500) 1820 (7200-7500 1339(2200-2500) 831 22.0050),
NOTE : JANTSA SIDE RINGS & LOCK RINGS ARE NOT INTERCHANGEABLE WITH ANY OTHER BRAND.
FITTING OTHER BRAND RINGS TO JANTSA WHEEL OR RIM PRODUCT IS EXTREMELY DANGEROUS!
\25
een
Seen
CreJANTSA
LJANTSA LabeUYear/Week/Day/Shif/Lot
No/Wheel Size/R
(Traceability Markings)
COMBINED RING
‘
3
Jantsa-Size-CR-Year
(Traceability Markings)
SIDE RING
N
Jantsa-Size-SR-Year
(Traceability Markings}
24)
PRODUCT STAMPING
SIDE RING
Jantsa-Size-SR-Year
[Traceability Markings)
CONICAL RING
Jantse-Size-CNR-Year
(Traceability Markings)
LOCK RING
Jantsa-Size-LR-Year
(Traceability Markings)
LOCK RING
Jantsa-Size-LR-Year
[Traceability Markings)
LOCK RING
Jantsa-Size-LR-Year
[Traceability Markings}
SECURITY RING
Jantsa-Size-SR-Year
(Traceability Markings]h600-15
650-15
e015
978-18
100015
exes
9K
re00Ktes
750-20
80-20
25-20
e.5v-20 Tubeless
.00v-20
Tubeless
1000W-20
21-18.00/1.5
8.00T6-26
85-24
be
12k
Single Pee
1000-24
pe
700-15
750-15
525-15
100-15
125.15
125-15
10900-1865
si/n0.50-165
1200-165
31/11 50-165.
36/12.50-165
3y1550-165)
1000820
1.00R20
‘00R20
12.00R20
1ys0R20
200R20
398/80R20
95/8020
16.00R20
95/8070
42125120
4831320
2421
13.00-26
s200Re
s200Re%
1400-26
TECHNICAL SPECIFICATIONS /
15850
eo1ez
65161
65162
20151
0153
on5
10515
165825
15826
145628
165975
165978
165979
165121
165122
1529
18262
20228
2024
20602
80631
85222
5616
a56ei
100225
100280
00271
100278
10020
202080
202400
bNMte210
8029
25289
35290
$5291
902402
02423
12400
12001
12402
146
161
161
1%
178
1%
2a
286
an
za
350
22
1526
za
an
an
2082
205
205
25
8
25
00
28
40
208
a2
205
2032
28
ma
2032
235
a5
25
285.75
2s
335
335
235
235
a5
381
a5
28
410
228.75
285.78
8
285.75
1s
25
00
235
2002
205
125
05
YA
2-e166/20690"
Rn
B-a16.6/204090"
19mm
75ie23.0/90°
15 8/623.5/90°
x
ea
26mm
-s0.1607.208222
x
26mm
83
26mm
orm
26mm
orm
26mm
226mm
22m
orm
26mm
226mm
223.8mm
226mm
26mm
24mm
mm
205mm
26mm
26mm
26mm
10
10
10
0
10
10
10
10
10
10
10
10
10
2
10
2
10
10
10
10
2%
10
6
10
10
2
2
365
130
1m
ak
ua
155
Negative 65
Negative 13
o
Negatives
65
20
17
1m,
o
180
17
7
190
26
26
00
3h
Negative 67
Negative 60
Negative 129
°
103
1m,
200
200
50
o
98
198TECHNICAL SPECIFICATIONS /
so00-26
wrsi2s
wrox2a
wise
Dwi6e24
pwiecs
26.5411.75
245x13.00
24,5415.00
12925
13925
95-25/1.7
000-25/15)
125-257
200-25).
1400-25/15
36.00-28/1.5
11.28-25/2
13.00-25/25'
1700.25/2
17,00-25/3.5
19:5-25/25
22.00-25/8
25.00-25 / 25)
wists
wi6x2e
wats
wisla2e
wis.
33-13.0/25
33-15.00/30
1400Re6
s20/70-26
e20/70-26
42070-26
1950-26
2050-26
355/55-24.5
15R-245,
18-625
1400-25
150025
200-25
195-25
205-25
6xd9,00-25|
16.00-25
18.00-25
208-25
205-28
235-25
265-28
295-25
184-26
184-26
169-28
149-28
2050-28
18.00-23
21.00-23
25506
950025
00025
12527
20028
40025
70025
70026
30078
70056
01956
195250
720250
250250
26160
26160
26163
14281
2a
am
an
za
za
181
221.25
22
za
za
2016
231
221
290
2125
za
214
3802
zal
a1
2a
2a
za
an
as
an
an
ag
149
18
an
za
290
za
2395
52.4
28
za
a5
as
05
25
25
208
28
28
275
218
213
25
25
35
208
25
235
400
25
ws
25
25
25
105
510
re)
225
soo
IN vaRIOUs
500
500
405
25
ns
278
25
2082
ns
335
‘COMING SOON
‘COMING SOON
‘26mm
226mm
223mm
n
n
2
he
‘0108 598222
a
22
223mm
a-es0ra7iR222
a
ni
ea
226mm
ea
ea
83
a
24mm
26mm
ea
26mm
SPECIFICATIONS
26mm
26mm
2
Aea2ilaas/R224
2
nes22.50n8)R22.6
22mm
As24/e33/R18.5,
a
2
26
26
0
Negative 30
0
0
0
0
Negative 50
au
0
Negative 73
2%
0
Negative 38
0
Negative 60
Negative 45
0
Negative 50
Negative 50
Negative 80
Inset 20,
inset. a6
inset 55
inset 90.5
inset 30
inset 55
inset 56
0
0
89
0
ar
Inset 30
Inset oSJantsa
www.jantsa.com.tr
We Care and Carry... Since 1977SINGLE PIECE AGRICULTURAL WHEELS
_ TECHNICAL SPECIFICATIONS / TEKNIK OZELLIKLER
Go |pesase swe [ANTsAPaRT| ceNTER | P.¢.0.tmml| jo. eqype | NUMBEROF | OFFSET|
biamerer |WHEELSIZE| | TIRESIZE” |" NUMBER | HOLE (mm) i OLE TYPE ie
rial a SUS Beige No so AVE] Tem)
raed
EPAR 70012 zee. m0 10 5 1 AeRELTUL MACHINE
ais 500-18 (8S Connected ug ‘oRIELLTUAL MACHINE
sesso con ee
a2 175 152K 6 31 AERULTURAL MACHINERY
ans 10? 140 Bt Sk ARVLTURAL MACHINERY
soos sone tts 15 152 15mm = & 18 ABREMLTURAL MACHINERY
aon 1151524 @tdmm 6&9 ARALTURAL MACHINE
anno 161 205 a ‘0 vas.
wi 110 uo AN 5 0 watous
wie 0 140 Aausenme 5 0 varus
ass 10 170 sauswaur 5 0 vais
450x168, eapte 45111 197.55 152.4 E16 6 45 AGRICULTURAL MACHINERY
eset 45112 161 205 AD 6 0 VARIOUS |
wie 6 a 5 40 wats
asia 135 175 navusieuur 5 Sees ARIUS
gaoieso-r6 22101 0 160 semen" 5 0 varscus
50016 somone 50102 161 205 a2 6 0 vantous
so104 10 10 at S28 ASC TURAL MACANEY
ssi02 na 160 Asus 5 0 varseus
sstoa 16 205 a ‘ 0 vastus
ss0/700-16 55104 8 205 m2 ‘ 0 vats
Ssous 70-16 55105 117851524 625 ORULTURA. MACNERY
ss106 na 0 a1 S28 AGRICULTURAL MACANERY
sso? 170 720 saws 26 —_ARICULTURAL MACINSY
sst09 15 152 BiSmm 26 AREULTURAL MACHINERY
tome ome (AIT 12 62 newwrsme 6 ness Ts
612 us 190 Rane og Nagtees TS
5016 9.0016 16650 161 205 a2 ‘ 0 AacuuRA TALES
ssone 75018 SIRT 205 82 6 asius
Ts018 $518.21 2 aim 880 arneus
some 750-18 1860090 160 a1SSmm 6S seus
woe 7808081818902 181 205 x2 ‘ 0 vais
mOmsRI®@ 189109035518 ARRILLTURAL MACHINERY
vain sorte 1180 161 205 n2 ‘ 0 AQRICLCTURAL TRALERS
ies 221 28 12 8 Q wats
wawe ssonore 1181 2 25 m2 8 0 vasious
182 16 205 a2 ‘ 0 AoacuuRAL TALES
aooe sooty ante 12 01mm = 0 seus
ee oo ee eo 2 pe
55020 750-20 20551201 23 osm = 6b various
warzo —zaoyronaa a0 221 215 Btwn Inset SPRWERS
woo 72000820 920021 205 n2 ‘ ° rics
sooyroR¢ 2002221 28 “2 8 0 soREULTURALMACANERY
wows 122020100 20 2 lm 61 tous