3in1
Pet Water Fountain
Water bow! Food bowl Food scoop
User manual
Read this user manual carefully
before you use the appliance and
keep it for future reference.
ellCongratulations on your purchase of the pet
water fountain! This unique pet water fountain
is ideal for small and middle sized pets.
HE portance |
vvvy
WARNING: Never operate the fountain without water. It will cause
«damages to the appliance if water level is below the MIN water line.
Make sure the AC/AC adaptor has been unplugged before
any inspections.
Clean the appliance with water and a damp cloth regularly.
Wash the fter before frst use.
Power on afer water adding, to avoid the failure of the pump.
Look over water level, add water timely when water level is under
MIN waterline. Otherwise, no water will be pumped out, and the
pump will make a noise, and finally fail
Wash the fiter regularly, suggest to replace the filer every 2
months.
Wi Specifications |] ]
Dimensions 32x22x15.30M (LaWxH)
Material ABS
Weight 1.05KG
Water bow! capacity | 3L
Available capacity | 1.8L
Food bow! capacity —_| 800ml (3-1/3 cups)
ACIAC adaptor output | AC 12V
Power 2wHiParts list and diagram | fi
Food Bowl
Water inlet MAX water line
Water outlet
Base Cover MIN water line
Transparent observation
Filter cotton >
Activated carbon $e
Filter
“rem %
a
Food bow! with scale
(Food scoop)
ACIAC adaptorisl |
‘To add food: Place the product on a flat place and
add food .The inner wall of the food bow! comes with
a scale, and can be used as a measuring cup.
vf
‘7
To add water: Add water into the water outlet slowly,
make sure the water level is between MAX and MIN
water line. Suggest to add water to the MAX water
line.Mloperation guide | [i
=
& i
To Run:
Insert the power plug, the pump begins to work and
the LED light will be on at the same time, and keep
water clean and fresh. (Water gushes from the water
inlet and flow into the water outlet. Any furs,
impurities and residues will be revolved into the
water inlet.)
To Disassemble:
Pull out the power plug, press the base and take the
cover off as shown in picture.a
vee
im.
ae
To Replace the filter:
‘After taking the top cover off, the filter can be taken
out directly. (Pay attention to the direction when
insert the filter)
To Replace the pump:
Take the wires out from wire slots. Remove the LED
light and pump for replacement. Put the wires back
into wire slots.
bs]
To Adjust the water flow:
‘Switch on the pump to adjust water flow with
“+"(faster) and *-"(slower) buttons. Default setting
is a minimum