Professional Documents
Culture Documents
Paper Conexión Pantallas PDF
Paper Conexión Pantallas PDF
Key words
1. Introduction
Conductor Ic eddy
ep
currents
Insulation
Metallic sheath
Figure 9 shows the magnetic field intensities, computed As shown in figure 10, the line with sheathed cables
in the straight line placed in the vertical of the central generates a magnetic field that is a 1,23% lower that the
conductor axis for three cables without and with metallic magnetic field created by the un-sheathed line.
sheath.
5.2 Flat formation
14 No sheath
With sheath Figure 11 shows the geometry of a line in trefoil
configuration.
12 s
Magnetic field (T)
10
R S T
8
No sheath
20
With sheath 6. Conclusions
18
16
conclusions can be deduced:
14 It has been shown that the geometry of the line, the
12
gap between conductors and the electric and geometric
parameters of the conductors have an important effect
10 on the circulating sheath currents values.
8 The circulating currents create a magnetic field
which adds to the magnetic field generated by the
6
central conductor. The resultant magnetic field usually
1.0 1.2 1.4 1.6 1.8 2.0 is lower than the magnetic field generated by the
Vertical distance y (m) central conductor.
The reduction factor of the magnetic field depends
Figure 12. Magnetic field generated by the flat formation on the geometry of the power line and the electric
with s = 0,083 m parameters of the cable.
When the gap between the axes increases, also
As shown in figure 9, the line with sheathed cables increase the sheath circulating currents. This fact
generates a magnetic field that is a 1,22 % lower that the produces a higher reduction of the total magnetic field
magnetic field created by the un-sheathed line. generated by the power line.