Professional Documents
Culture Documents
G41M P28 PDF
G41M P28 PDF
Micro-Star International
MS-7592
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Part Number
G52-75921XK
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR IN-
TERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks are the properties of their respective owners.
MSI is registered trademark of Micro-Star Intl Co.,Ltd.
NVIDIA is registered trademark of NVIDIA Corporation.
ATI is registered trademark of ATI Technologies, Inc.
AMD is registered trademarks of AMD Corporation.
Intel is registered trademarks of Intel Corporation.
Windows is registered trademarks of Microsoft Corporation.
AMI is registered trademark of American Megatrends, Inc.
Award is a registered trademark of Phoenix Technologies Ltd.
Sound Blaster is registered trademark of Creative Technology Ltd.
Realtek is registered trademark of Realtek Semiconductor Corporation.
JMicron is registered trademark of JMicron Technology Corporation.
Netware is a registered trademark of Novell, Inc.
Revision History
MS-7592
Safety Instructions
Always read the safety instructions carefully.
Keep this User Manual for future reference.
Keep this equipment away from humidity.
Lay this equipment on a reliable flat surface before setting it up.
The openings on the enclosure are for air convection hence protects the
equipment from overheating. Do not cover the openings.
Make sure the voltage of the power source is at 110/220V before connect-
ing.
Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
Always Unplug the Power Cord before inserting any add-on card or module.
All cautions and warnings on the equipment should be noted.
Never pour any liquid into the opening that can cause damage or cause elec-
trical shock.
If any of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well or you can not get it work according
to User Manual.
The equipment has been dropped and damaged.
The equipment has obvious sign of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-
TIONED, STORAGE TEMPERATURE ABOVE 60C (140F), IT MAY DAM-
AGE THE EQUIPMENT.
CAUTION
Danger of explosion if battery is incorrectly replaced.
For better environmental protection, waste batteries should be col-
lected separately for recycling or special disposal.
WEEE Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI
must remind you that...
Under the European Union (EU) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes effect on
August 13, 2005, products of electrical and electronic equipment
cannot be discarded as municipal wastes anymore, and manufacturers of covered
electronic equipment will be obligated to take back such products at the end of
their useful life. MSI will comply with the product take back requirements at the
end of life of MSI-branded products that are sold into the EU. You can return these
products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gem der Richtlinie 2002/96/EG ber Elektro- und Elektronik-Altgerte drfen
Elektro- und Elektronik-Altgerte nicht mehr als kommunale Abflle entsorgt
werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen
beauftragt, die in die Europische Union in Verkehr gebrachten Produkte, am
Ende seines Lebenszyklus zurckzunehmen. Bitte entsorgen Sie dieses Produkt
zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgertesammelstelle
in Ihrer Nhe.
FRANAIS
En tant qucologiste et afin de protger lenvironnement, MSI tient rappeler
ceci...
Au sujet de la directive europenne (EU) relative aux dchets des quipement
lectriques et lectroniques, directive 2002/96/EC, prenant effet le 13 aot 2005,
que les produits lectriques et lectroniques ne peuvent tre dposs dans les
dcharges ou tout simplement mis la poubelle. Les fabricants de ces quipe-
ments seront obligs de rcuprer certains produits en fin de vie. MSI prendra en
compte cette exigence relative au retour des produits en fin de vie au sein de la
communaut europenne. Par consquent vous pouvez retourner localement ces
matriels dans les points de collecte.
MSI
, , ....
()
( WEEE 2002/96/EC),
13 2005 , ,
, ,
. MSI
,
MSI EC, .
.
MS-7592
ESPAOL
MSI como empresa comprometida con la proteccin del medio ambiente,
recomienda:
Bajo la directiva 2002/96/EC de la Unin Europea en materia de desechos y/
o equipos electrnicos, con fecha de rigor desde el 13 de agosto de 2005, los
productos clasificados como elctricos y equipos electrnicos no pueden ser
depositados en los contenedores habituales de su municipio, los fabricantes de
equipos electrnicos, estn obligados a hacerse cargo de dichos productos al
termino de su perodo de vida. MSI estar comprometido con los trminos de
recogida de sus productos vendidos en la Unin Europea al final de su periodo
de vida. Usted debe depositar estos productos en el punto limpio establecido por
el ayuntamiento de su localidad o entregar a una empresa autorizada para la
recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat.
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Elec-
trische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in
zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit
soort producten worden verplicht om producten retour te nemen aan het eind van
hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten
die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen
geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zatitili prirodnu sredinu, i kao preduzee koje vodi rauna o okolini i prirod-
noj sredini, MSI mora da vas podesti da
Po Direktivi Evropske unije (EU) o odbaenoj ekektronskoj i elektrinoj opre-
mi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi
koji spadaju pod elektronsku i elektrinu opremu ne mogu vie biti odbaeni
kao obian otpad i proizvoai ove opreme bie prinueni da uzmu natrag ove
proizvode na kraju njihovog uobiajenog veka trajanja. MSI e potovati zahtev
o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI
oznaku i koji su prodati u EU. Ove proizvode moete vratiti na lokalnim mestima
za prikupljanje.
POLSKI
Aby chroni nasze rodowisko naturalne oraz jako firma dbajca o ekologi, MSI
przypomina, e...
Zgodnie z Dyrektyw Unii Europejskiej (UE) dotyczc odpadw produktw elek-
trycznych i elektronicznych (Dyrektywa 2002/96/EC), ktra wchodzi w ycie 13
sierpnia 2005, tzw. produkty oraz wyposaenie elektryczne i elektroniczne nie
mog by traktowane jako mieci komunalne, tak wic producenci tych produktw
bd zobowizani do odbierania ich w momencie gdy produkt jest wycofywany z
uycia. MSI wypeni wymagania UE, przyjmujc produkty (sprzedawane na tere-
nie Unii Europejskiej) wycofywane z uycia. Produkty MSI bdzie mona zwraca
w wyznaczonych punktach zbiorczych.
TRKE
evreci zelliiyle bilinen MSI dnyada evreyi korumak iin hatrlatr:
Avrupa Birlii (AB) Kararnamesi Elektrik ve Elektronik Malzeme At, 2002/96/
EC Kararnamesi altnda 13 Austos 2005 tarihinden itibaren geerli olmak zere,
elektrikli ve elektronik malzemeler dier atklar gibi pe atlamayacak ve bu
elektonik cihazlarn reticileri, cihazlarn kullanm sreleri bittikten sonra rnleri
geri toplamakla ykml olacaktr. Avrupa Birliine satlan MSI markal rnlerin
kullanm sreleri bittiinde MSI rnlerin geri alnmas istei ile ibirlii ierisinde
olacaktr. rnlerinizi yerel toplama noktalarna brakabilirsiniz.
ESKY
Zle nm na ochran ivotnho prosted - spolenost MSI upozoruje...
Podle smrnice Evropsk unie (EU) o likvidaci elektrickch a elektronickch
vrobk 2002/96/EC platn od 13. srpna 2005 je zakzno likvidovat elektrick
a elektronick vrobky v bnm komunlnm odpadu a vrobci elektronick-
ch vrobk, na kter se tato smrnice vztahuje, budou povinni odebrat takov
vrobky zpt po skonen jejich ivotnosti. Spolenost MSI spln poadavky na
odebrn vrobk znaky MSI, prodvanch v zemch EU, po skonen jejich
ivotnosti. Tyto vrobky mete odevzdat v mstnch sbrnch.
MAGYAR
Annak rdekben, hogy krnyezetnket megvdjk, illetve krnyezetvdknt
fellpve az MSI emlkezteti nt, hogy ...
Az Eurpai Uni (EU) 2005. augusztus 13-n hatlyba lp, az elektromos
s elektronikus berendezsek hulladkairl szl 2002/96/EK irnyelve szerint
az elektromos s elektronikus berendezsek tbb nem kezelhetek lakossgi
hulladkknt, s az ilyen elektronikus berendezsek gyrti kteless vlnak az
ilyen termkek visszavtelre azok hasznos lettartama vgn. Az MSI betartja
a termkvisszavtellel kapcsolatos kvetelmnyeket az MSI mrkanv alatt az
EU-n bell rtkestett termkek esetben, azok lettartamnak vgn. Az ilyen
termkeket a legkzelebbi gyjthelyre viheti.
ITALIANO
Per proteggere lambiente, MSI, da sempre amica della natura, ti ricorda che.
In base alla Direttiva dellUnione Europea (EU) sullo Smaltimento dei Materiali
Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodot-
ti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono pi
essere eliminati come rifiuti municipali: i produttori di detti materiali saranno ob-
bligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguer a tale
Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti allinterno
dellUnione Europea alla fine del loro ciclo di vita. possibile portare i prodotti
nel pi vicino punto di raccolta
MS-7592
Table of Content
English............................................................................... 9
Getting start...............................................................................................9
SPECIFICATIONS............................................................................................10
Screw Holes...............................................................................................12
REAR PANEL...................................................................................................13
HARDWARE SETUP........................................................................................13
BIOS Setup....................................................................................................22
. ............................................................................... 27
............................................................................................................27
...................................................................................................................28
...........................................................................................................30
...................................................................................................................31
...................................................................................................31
BIOS .........................................................................................................40
Franais.......................................................................... 45
Pour commencer......................................................................................45
SPCIFICATIONS............................................................................................46
Trous tarauds.........................................................................................48
Panneau arrire.......................................................................................49
Installation du matriel.......................................................................49
Rglage bios...............................................................................................58
DEUTSCH........................................................................... 63
eINLEITUNG....................................................................................................63
SPEZIFIKATIONEN..........................................................................................64
SCHRAUBENLCHER....................................................................................66
Hinteres Anschlusspanel.....................................................................67
HARDWARE SETUP........................................................................................67
BIOS Setup....................................................................................................76
........................................................................... 81
..........................................................................................81
........................................................................................82
...........................................................................84
...........................................................................................85
.....................................................................85
BIOS..........................................................................................95
............................................................................ 101
.................................................................................................................101
.................................................................................................................102
.............................................................................................................104
..........................................................................................................105
..........................................................................................................105
BIOS .......................................................................................................114
............................................................................ 119
.................................................................................................................119
.................................................................................................................120
.............................................................................................................122
.................................................................................................................123
..........................................................................................................123
BIOS .......................................................................................................132
................................................................................ 137
..........................................................................................................137
........................................................................................138
.............................................................................................................140
I/O........................................................................................................141
.............................................................................141
BIOS.....................................................................................................150
MS-7592
English
Getting start
Thank you for choosing the G41M-P28/ G41M-P26 (MS-7592 v5.x) Micro-ATX
mainboard. The G41M-P28/ G41M-P26 is based on Intel G41 & ICH7 chipset
for optimal system efficiency. Designed to fit the advanced Intel Core2 Quad/
Core2 Duo/ Pentium/ Celeron processor in LGA775 package, the G41M-P28/
G41M-P26 delivers a high performance and professional desktop platform solu-
tion
Layout
Top : mouse SYSFAN2
Bottom: SYSFAN1
keyboard
CPUFAN1
Top :
Parallel Port
Bottom:
COM port
VGA port
JPWR1
USB ports
T: Line-In
M: Line-Out
IDE1
B: Mic
T:RS-Out
JTPM1
M:CS-Out
B:SS-Out
BATT
JCOM1
(optional)
+
JBAT1
JCI1
JFP1 JFP2
PCI_E1
Intel
ICH7
PCI 1
SATA3
SATA4
PCI 2
JCD1 FDD 1
SATA1
SATA2
SPECIFICATIONS
Processor
Intel Core2 Quad/ Core2 Duo/ Pentium/ Celeron processor in LGA775
package
Support 4-pin CPU fan pinheader with fan speed control
Support FMB 05a@95W
(For the latest information about CPU, please visit
http://www.msi.com/index.php?func=cpuform2)
Supported FSB
Up to 1333 MHz
Chipset
North Bridge: Intel G41 chipset
South Bridge: Intel ICH7 chipset
Memory
2 DDR3 1333 (OC)/1066/800 DIMM slots (8GB Max)
(For more information on compatible components, please visit
http://www.msi.com/index.php?func=testreport)
LAN
Supports LAN 10/100/1000 Fast Ethernet by Atheros AR8131M (G41M-P28)
Supports LAN 10/100 Fast Ethernet by Atheros AR8132M (G41M-P26)
Audio
VIA VT1708S 7.1-channel audio codec
Compliant with Azalia 1.0 Spec
IDE
1 IDE port by Intel ICH7
Supports Ultra DMA 66/100, PIO & Bus Master operation mode
SATA
4 SATA 3Gb/s ports by Intel ICH7
Floppy
1 floppy port
Supports 1 FDD with 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB
Connectors
Back Panel I/O
1 PS/2 mouse port
1 PS/2 keyboard port
1 serial port
1 VGA port
1 parallel port
4 USB 2.0 ports
1 LAN jack
6 flexible audio jacks (G41M-P28)
3 flexible audio jacks (G41M-P26)
10
MS-7592
Onboard Connectors
2 USB 2.0 connectors
1 S/PDIF-Out connector
1 CD-In connector
1 front audio connector
1 chassis Intrusion connector
1 serial port connecotr
1 TPM connector
Slots
1 PCIE x16 slot
2 PCI slots, supports 3.3V/ 5V PCI bus Interface
Form Factor
Micro-ATX (200mm x 245mm)
Mounting
6 mounting holes
If you need to purchase accessories and request the part numbers, you could
search the product web page and find details on our web address below
http://www.msi.com/index.php
11
Screw Holes
When you install the mainboard, you have to place the mainboard into the chas-
sis in the correct direction. The locations of screws holes on the mainboard are
shown as below.
BATT
+
Screw holes
Refer above picture to install standoffs in the appropriate locations on chassis and
then screw through the mainboard screw holes into the standoffs.
Important
* To prevent damage to the mainboard, any contact between the mainboard circuit
and chassis or unnecessary standoffs mounted on the chassis is prohibited.
12
MS-7592
REAR PANEL
The rear panel provides the following connectors:
Line-Out CS-Out
HARDWARE SETUP
This section provides instructions on CPU and memory installation, as well as
jumper settings on the mainboard. While doing the installation, be careful in hold-
ing the components and follow the installation procedures.
The pin-pad side of LGA 775 CPU The surface of LGA 775 CPU
Remember to apply some thermal
paste on it for better heat dispersion.
13
Follow the steps below to install the CPU & cooler correctly. Wrong installation will
cause the damage of your CPU & mainboard.
. The CPU socket has a plastic cap on it to protect
the contact from damage. Before you install the
CPU, always cover it to protect the socket pins.
2. Remove the cap from the lever hinge side.
3. The pins of socket reveal.
4. Open the load lever.
5. Lift the load lever up and open the load plate.
6. After confirming the CPU direction for correct mat-
ing, put down the CPU in the socket housing frame.
Be sure to grasp on the edge of the CPU base.
Note that the alignment keys are matched.
7. Visually inspect if the CPU is seated well into the
socket. If not, take out the CPU with pure vertical
motion and reinstall.
8. Cover the load plate onto the package.
9. Press down the load lever lightly onto the load
plate, and then secure the lever with the hook un-
der the retention tab.
0. Align the holes on the mainboard with the heatsink.
Push down the cooler until its four clips get wedged
into the holes of the mainboard.
. Press the four hooks down to fasten the cooler.
Then rotate the locking switch (refer to the correct
direction marked on it) to lock the hooks.
2. Turn over the mainboard to confirm that the clip-
ends are correctly inserted.
3. Finally, attach the CPU Fan cable to the CPU fan
connector on the mainboard.
Important
* Read the CPU status in BIOS.
* Whenever the CPU is not installed, always protect your CPU socket pins with
the plastic cap covered.
* Mainboard photos shown in this section are for demonstration of the CPU/cooler
installation only. The appearance of your mainboard may vary depending on the
model you purchase.
14
MS-7592
Notch
Volt
Important
* In Dual-Channel mode, make sure that you install memory modules of the same
type and density in different channel DIMM slots.
* To ensure a successful system boot-up, always insert the memory modules into
the DIMM1 first.
15
ATX 24-Pin Power Connector: JPWR1
This connector allows you to connect an ATX 24-pin power supply. To connect the
ATX 24-pin power supply, make sure the plug of the power supply is inserted in
the proper orientation and the pins are aligned. Then push down the power supply
firmly into the connector.
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 .5 W u
3 V
.3
9 .P ro nd
V
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1
2 3.+ +5 V
4
2 2. +5 s un d
.G 5 V
2 1. Re o un d
ro
2 0. Gr o n #
u
V
2 9. Gr rou ON d
n
d
1 8. G - un
1 7. PS o
1 . r V V
1 5. -12 .3
6
1 4. +3
d
1 3.
G
1
ro un
u d
n
d
3 .+1
.+ 2
4
1 V
2
V
Important
Make sure that all the connectors are connected to proper ATX power supplies to
ensure stable operation of the mainboard.
16
MS-7592
Important
If you install two IDE devices on the same cable, you must configure the drives
to cable select mode or separately to master / slave mode by setting jumpers.
Refer to IDE device documentation supplied by the vendors for jumper setting
instructions.
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss
may occur during transmission.
1 .+ en
.G 1 s o
.G 1 s
2 .S o
2 .S
ro 2V or l
3 .C
ro 2V or
3
u
4
u
n
n
d
17
S/PDIF-Out Connector: JSP1
This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect
Format) interface for digital audio transmission.
3 .S CC
.G P
2 .V
ro DI
1
u F
n
d
CD-In Connector: JCD1
This connector is provided for external audio input.
1 .G ro
.L ro u
2 .G
3 .R
4
u nd
n
d
Spe
o
w
zer
e
r
Buz
S
P
1
w
0
o
it
.N
w
8 -
ch
.+
e
o .
r
6 .+
P -
L
.
in
E
4 -
8
D
2
6 .-
.
.+
4 +
2
.
7 .Po sp n
.N w e d
5 .Su rou
JFP2
o e n
9 .+
3 .G
.R
P rL d
7 .-
in E LE
1
e R
5 .-
se e
JFP1
3 .+
rv e
e tS
1
D D
d
s
H
D
D
w
it
L
ch
E
D
o
6 DT N
P
.D R
in
4 SI
.
2
.
9 . R r ou T
.R T n
7 .G U
I S d
5 . SO C D
3 .D
1
18
MS-7592
1 .N IC S
0 o
.H
8 .M RE nd
e Pin et C
6 .P ou
a
d
4 Gr
P
h
2
o
.
D EN
n
e
e E
D
ct #
e
io
te
n
ct
io
n
9 S a R
.H E d
7 .He IC L
e NS P
.
5 .M I C
a E h
d
3 .M
P _S ne
h E R
1
o N
n
e D
L
o
Front USB Connector: JUSB1, JUSB2
This connector, compliant with Intel I/O Connectivity Design Guide, is ideal for
connecting high-speed USB interface peripherals such as USB HDD, digital cam-
eras, MP3 players, printers, modems and the like.
1 .G
0 r B D-
.U o D
8 US B
S un +
6 .U C
B d
. S
O
4 VC
C
2
.
9 .G B D
.N ro D -
7 .US B
o u +
5 .U CC
P nd
in
3 .V
1
ro u n r
u nd
8 Se 3V ta
n
d
6 3. S
.
4 .3V
.
2
1 1.L C a dd et
e
3 P a d re
r
1 .LP C a es k
.L C d d s
P
9 LP C R loc
C ad dre ss &
7 .LP C C
F d s & d
.
ra re s
5 .L P C
m s & da ta
3 .LP
e s & da ta pi
1
re s
d ta pin 0
a p 1
ta in
p 2
in
a
3
n
19
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
2 .C
.G IN
1
ro T
u RU
n
d
Clear CMOS Jumper: JBAT1
There is a CMOS RAM onboard that has a power supply from an external battery
to keep the data of system configuration. With the CMOS RAM, the system can
automatically boot OS every time it is turned on. If you want to clear the system
configuration, set the jumper to clear data.
JBAT1
1 1 1
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to
1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage
the mainboard.
20
MS-7592
PCIE Slot
The PCIE slot supports the PCIE interface expansion card.
PCI Slot
The PCI slot supports LAN card, SCSI card, USB card, and other add-on cards
that comply with PCI specifications.
Important
Make sure that you unplug the power supply first. Meanwhile, read the documen-
tation for the expansion card to configure any necessary hardware or software set-
tings for the expansion card, such as jumpers, switches or BIOS configuration.
Order
1 2 3 4
Slot
21
BIOS Setup
Power on the computer and the system will start POST (Power On Self Test)
process. When the message below appears on the screen, press <DEL> key to
enter Setup.
If the message disappears before you respond and you still wish to enter Setup,
restart the system by turning it OFF and On or pressing the RESET button. You
may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <De-
lete> keys.
Main Page
22
MS-7592
Cell Menu
Use this menu to specify your settings for frequency/voltage control.
M-Flash
Use this menu to read/ flash the BIOS from storage drive (FAT/ FAT32 format
only).
Load Fail-Safe Defaults
Use this menu to load the BIOS default values that are factory settings for system
operations.
Load Optimized Defaults
Use this menu to load factory default settings into the BIOS for stable system
performance operations.
Save & Exit Setup
Save changes to CMOS and exit setup.
Cell Menu
23
Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance
level of the microprocessor. This field will appear after you installed the CPU which
supports speedstep technology.
Adjust CPU FSB Frequency (MHz)
This item allows you to adjust the CPU FSB frequency.
Adjust CPU Ratio
This item is used to adjust CPU clock multiplier (ratio). It is available only when the
processor supports this function.
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency (FSB x Ratio). Read-only.
MEMORY-Z
Press <Enter> to enter the submenu.
DIMM1/2 Memory SPD Information
Press <Enter> to enter the submenu, that displays the informations of installed
memory.
Advance DRAM Configuration
Press <Enter> to enter the submenu.
DRAM Timing Mode
Selects whether DRAM timing is controlled by the SPD (Serial Presence De-
tect) EEPROM on the DRAM module. Setting to [Auto By SPD] enables DRAM
timings and the following related items to be determined by BIOS based on the
configurations on the SPD. Selecting [Manual] allows users to configure the
DRAM timings and the following related items manually.
CAS Latency (CL)
When the DRAM Timing Mode sets to [Manual], the field is adjustable. This
controls the CAS latency, which determines the timing delay (in clock cycles)
before SDRAM starts a read command after receiving it.
tRCD
When the DRAM Timing Mode sets to [Manual], the field is adjustable. When
DRAM is refreshed, both rows and columns are addressed separately. This
setup item allows you to determine the timing of the transition from RAS (row
address strobe) to CAS (column address strobe). The less the clock cycles, the
faster the DRAM performance.
tRP
When the DRAM Timing Mode sets to [Manual], the field is adjustable. This
item controls the number of cycles for Row Address Strobe (RAS) to be al-
lowed to precharge. If insufficient time is allowed for the RAS to accumulate its
charge before DRAM refresh, refreshing may be incomplete and DRAM may
fail to retain data. This item applies only when synchronous DRAM is installed
in the system.
24
MS-7592
tRAS
When the DRAM Timing Mode sets to [Manual], the field is adjustable. This set-
ting determines the time RAS takes to read from and write to a memory cell.
tRTP
When the DRAM Timing Mode sets to [Manual], the field is adjustable. Time
interval between a read and a precharge command.
tRFC
When the DRAM Timing Mode sets to [Manual], the field is adjustable. This set-
ting determines the time RFC takes to read from and write to a memory cell.
tWR
When the DRAM Timing Mode is set to [Manual], the field is adjustable. It speci-
fies the amount of delay (in clock cycles) that must elapse after the completion
of a valid write operation, before an active bank can be precharged. This delay
is required to guarantee that data in the write buffers can be written to the
memory cells before precharge occurs.
tRRD
When the DRAM Timing Mode sets to [Manual], the field is adjustable. Speci-
fies the active-to-active delay of different banks.
tWTR
When the DRAM Timing Mode is set to [Manual], the field is adjustable. This
item controls the Write Data In to Read Command Delay memory timing. This
constitutes the minimum number of clock cycles that must occur between the
last valid write operation and the next read command to the same internal bank
of the DDR device.
FSB/DRAM Ratio
This item will allow you to adjust the ratio of FSB to memory.
Adjusted DRAM Frequency (MHz)
It shows the adjusted memory frequency. Read-only.
Adjust PCI-E Frequency (MHz)
This item allows you to adjust the PCI-E frequency.
Auto Disable DRAM/PCI Frequency
When set to [Enabled], the system will remove (turn off) clocks from empty DIMM
and PCI slots to minimize the electromagnetic interference (EMI).
Spread Spectrum
When the motherboards clock generator pulses, the extreme values (spikes) of
the pulses create EMI (Electromagnetic Interference). The Spread Spectrum func-
tion reduces the EMI generated by modulating the pulses so that the spikes of
the pulses are reduced to flatter curves. If you do not have any EMI problem,
leave the setting at Disabled for optimal system stability and performance. But if
you are plagued by EMI, set to Enabled for EMI reduction. Remember to disable
Spread Spectrum if you are overclocking because even a slight jitter can introduce
a temporary boost in clock speed which may just cause your overclocked proces-
sor to lock up.
25
Important
* If you do not have any EMI problem, leave the setting at [Disabled] for optimal
system stability and performance. But if you are plagued by EMI, select the
value of Spread Spectrum for EMI reduction.
* The greater the Spread Spectrum value is, the greater the EMI is reduced, and
the system will become less stable. For the most suitable Spread Spectrum
value, please consult your local EMI regulation.
26
MS-7592
CPUFAN1
Top :
Parallel Port
Bottom:
COM port
VGA port
JPWR1
USB ports
T: Line-In
M: Line-Out
IDE1
B: Mic
T:RS-Out
JTPM1
M:CS-Out
B:SS-Out
BATT
JCOM1
(optional)
+
JBAT1
JCI1
JFP1 JFP2
PCI_E1
Intel
ICH7
PCI 1
SATA3
SATA4
PCI 2
JCD1 FDD 1
SATA1
SATA2
27
LGA775 Intel Core2 Quad/ Core2 Duo/ Pentium/
Celeron
4 CPU
FMB 05a@95W
(CPU
http://www.msi.com/index.php?func=cpuform2 )
FSB
1333 MHz
: Intel G41
: Intel ICH7
DDR3 1333 (OC)/1066/800 DIMM 2 ( 8GB)
(
http://www.msi.com/index.php?func=testreport .)
LAN
Atheros AR8131M (G41M-P28) LAN 10/100/1000 Fast Ethernet
Atheros AR8132M (G41M-P26) LAN 10/100 Fast Ethernet
VIA VT1708S 7.1-
Azalia 1.0 Spec
IDE
Intel ICH7 IDE 1
Ultra DMA 66/100, PIO
SATA
Intel ICH7 SATA 3Gb/s 4
1
360KB, 720KB, 1.2MB, 1.44MB 2.88MB FDD 1
I/O
PS/2 1
PS/2 1
1
VGA 1
1
USB 2.0 4
LAN 1
6 (G41M-P28)
3 (G41M-P26)
28
MS-7592
USB 2.0 2
S/PDIF 1
CD 1
1
1
1
TPM 1
PCIE x16 1
PCI 2, 3.3V/ 5V PCI
Micro-ATX (200mm x 245mm)
,
http://www.msi.com/index.php .
29
.
.
I/O
.
BATT
+
*
.
*
.
30
MS-7592
LAN
RS
CS
VGA USB SS
()
CPU, ,
. ,
. , .
LGA775 CPU
. CPU
.
1 1
. .
31
CPU . CPU
.
. CPU
. CPU ,
.
2. .
3. .
4. .
5. .
6. CPU ,
CPU . CPU
.
.
7. CPU
. , CPU
.
8. .
9. ,
.
0. . 4
.
. 4 .
(
).
2.
.
3. CPU CPU
.
* BIOS CPU .
* CPU , CPU
.
* CPU/
. .
32
MS-7592
. , .
2. DIMM .
DIMM .
DIMM
. DIMM
.
3. DIMM
.
* , DIMM
.
* , DIMM1 .
33
ATX 24 : JPWR1
ATX 24 . ATX 24
,
, .
.
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 .5 W u
3 V
.3
9 .P ro nd
V
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1
2 3.+ +5 V
4
2 2. +5 s un d
.G 5 V
2 1. Re o un d
ro
2 0. Gr o n #
u
V
2 9. Gr rou ON d
n
d
1 8. G - un
1 7. PS o
1 . r V V
1 5. -12 .3
6
1 4. +3
d
1 3.
G
1
ATX 4 : JPWR2
4 CPU .
1 .G
.G ro
2
ro un
u d
n
d
3 .+1
.+ 2
4
1 V
2
V
ATX
.
: FDD1
360KB, 720KB, 1.2MB, 1.44MB 2.88MB
.
34
MS-7592
IDE : IDE1
IDE , IDE
.
2 IDE ,
, / .
IDE .
ATA : SATA1 ~ 4
ATA .
ATA .
ATA 90 . ,
.
1 .+ en
.G 1 s o
.G 1 s
2 .S o
2 .S
ro 2V or l
3 .C
ro 2V or
3
u
4
u
n
n
d
35
S/PDIF : JSP1
S/PDIF(Sony & Philips Digital Intercon-
nect Format) .
3 .S CC
.G P
2 .V
ro DI
1
u F
n
d
CD : JCD1
.
1 .G ro
.L ro u
2 .G
3 .R
4
u nd
n
d
: JFP1, JFP2
LED . JFP1
Intel Front Panel I/O Connectivity Design Guide .
r
ake
P
Spe
o
w
zer
e
r
Buz
S
P
1
w
0
o
it
.N
w
8 -
ch
.+
e
o .
r
6 .+
P -
L
.
in
E
4 -
8
D
2
6 .-
.
.+
4 +
2
.
7 .Po sp n
.N w e d
5 .Su rou
JFP2
o e n
9 .+
3 .G
.R
P rL d
7 .-
in E LE
1
e R
5 .-
se e
JFP1
3 .+
rv e
e tS
1
D D
d
s
H
D
D
w
it
L
ch
E
D
: JCOM1
16550A 16 FIFO .
.
1 .C S
0 T R
.N S
8
o
6 DT N
P
.D R
in
4 SI
.
2
.
9 . R r ou T
.R T n
7 .G U
I S d
5 . SO C D
3 .D
1
36
37
MS-7592
, Intel
P _S ne
d o m s & da ta
a E h ra re s a
e NS P in F d s & d
.H E d P nd C ad dre ss &
9 S a R
. o u + P re s
7 .He IC L .N ro D - .L C d d s
9 .G B D 3 P a d re
5 .M I C
7 .US B 1 1.L C a dd et
1 .LP C a es k
TPM .
3 .M S
1 5 .U CC 9 LP C R loc
3 .V .
n 7 .LP C C
io 1
5 .L P C
ct C
te O 3 .LP
B d
D
e .U o D
o
n 0 r B D-
n 1 .G
P
h io 8 US B d
d ct # . S
6 .U C n
u nd
a e E
e Pin et C 4 VC ro u n r e
r
.
TPM : JTPM1
.H D EN 2 .G ro Pi we Q r ow
0 o 4
1 .N IC S 1 2 . G o P o IR w e y p
8 .M RE nd 1 0.N V ial o b
6 .P ou
1 .5 r P nd
.
4 Gr 8 Se 3V ta
. .
2 6 3. S
.
4 .3V
2
: JCI1
. ,
.
. , BIOS .
2 .C
.G IN
1
ro T
u RU
n
d
CMOS : JBAT1
CMOS RAM . CMOS RAM ,
OS . ,
.
JBAT1
1 1 1
2-3 CMOS .
1-2 . CMOS .
.
38
MS-7592
PCIE
PCIE PCIE .
PCI
PCI LAN , SCSI , USB PCI
.
.
, BIOS
.
PCI
Interrupt request line IRQ I-R-Q ,
. PCI IRQ
PCI :
1 2 3 4
39
BIOS
POST(Power On Self Test) .
, <DEL> .
,
(RESET) . <Ctrl>, <Alt>
<Delete> .
40
MS-7592
Cell Menu
/ .
M-Flash
BIOS (FAT/
FAT32 ).
Load Fail-Safe Defaults
BIOS
.
Load Optimized Defaults
BIOS
.
Save & Exit Setup
CMOS .
Exit Without Saving
.
41
Intel EIST
Intel SpeedStep
. speedstep CPU .
42
MS-7592
tRTP
DRAM [Manual] ,
. .
tRFC
DRAM [Manual] ,
. RFC
.
tWR
DRAM [Manual] ,
.
.
.
tRRD
DRAM [Manual] ,
. active-to-active .
tWTR
DRAM [Manual] ,
. (Write Data In to Read Command
Delay) . DDR
.
FSB/DRAM Ratio
FSB .
Adjusted DRAM Frequency (MHz)
. ( ).
Adjust PCI-E Frequency (MHz)
PCI-E .
Auto Disable DRAM/PCI Frequency
[Enabled] DRAM PCI (
) (EMI) .
Spread Spectrum
()
. EMI
. EMI
. EMI
EMI .
.
43
* EMI [Dis-
abled] . EMI EMI
.
* EMI .
EMI .
*
.
44
MS-7592
Franais
Pour commencer
Flicitations, vous venez daqurir une carte mre des sries Micro-ATX G41M-
P28/ G41M-P26 (MS-7592 v5.x). Les sries G41M-P28/ G41M-P26 sont bases
sur les puces Intel G41 & ICH7 offrant un systme trs performant. La carte
fonctionne avec les processeurs Intel Core2 Quad/ Core2 Duo/ Pentium/
Celeron avancs dans le paquet LGA775, les sries G41M-P28/ G41M-P26
sont trs performanantes et offrant une solution adapte tant aux professionnels
quaux particulier.
Schma
CPUFAN1
Top :
Parallel Port
Bottom:
COM port
VGA port
JPWR1
USB ports
T: Line-In
M: Line-Out
IDE1
B: Mic
T:RS-Out
JTPM1
M:CS-Out
B:SS-Out
BATT
JCOM1
(optional)
+
JBAT1
JCI1
JFP1 JFP2
PCI_E1
Intel
ICH7
PCI 1
SATA3
SATA4
PCI 2
JCD1 FDD 1
SATA1
SATA2
45
SPCIFICATIONS
Processeurs
Intel Core2 Quad/ Core2 Duo/ Pentium/ Celeron processeurs dans le
paquet LGA775
Supporte le connecteur de 4 pin du ventilateur de CPU avec le contrle de la
vitesse du ventilateur
Supporte FMB 05a@95W
(Pour plus dinformation sur le CPU, veuillez visiter
http://www.msi.com/index.php?func=cpuform2)
FSB support
Jusqu 1333 MHz
Puces
North Bridge : puces Intel G41
South Bridge : puces Intel ICH7
Mmoire
2 emplacements DDR3 1333 (OC)/1066/800 DIMM (8GB Max)
(Pour plus dinformation sur les composants compatibles, veuillez visiter
http://www.msi.com/index.php?func=testreport)
LAN
Supporte LAN 10/100/1000 Fast Ethernet par Atheros AR8131M (G41M-
P28)
Supporte LAN 10/100 Fast Ethernet par Atheros AR8132M (G41M-P26)
Audio
VIA VT1708S 7.1-canaux audio codec
Conforme aux spcifications Azalia 1.0
IDE
1 port IDE par Intel ICH7
Supporte le mode dopration Ultra DMA 66/100, PIO et Bus Master
SATA
4 ports SATA 3Gb/s par Intel ICH7
Disquette
1 port de disquette
Supporte 1 FDD avec 360KB, 720KB, 1.2MB, 1.44MB et 2.88MB
Connectors
Panneau arrire I/O
1 port souris PS/2
1 port clavier PS/2
1 port srial
1 port VGA
1 port parallle
4 ports USB 2.0
1 prise LAN
6 prises audio flexibles (G41M-P28)
3 prises audio flexibles (G41M-P26)
46
MS-7592
Connecteurs intgrs
2 connecteurs USB 2.0
1 connecteur S/PDIF-Out
1 connecteur CD-In
1 connecteur audio avant
1 connecteur chssis Intrusion
1 connecteur de port srial
1 connecteur TPM
Emplacements
1 emplacement PCIE x16
2 emplacements PCI, supporte lInterface bus PCI 3.3V/ 5V
Dimension
Micro-ATX (200mm x 245mm)
Montage
6 trous de montage
Si vous dsirez acheter des accessoires et vous avez besoin de numro des
pices, vous pouvez chercher sur la page website et trouver les dtails sur notre
adresse ci-dessous
http://www.msi.com/index.php
47
Trous tarauds
Quand vous installez la carte mre, il faut dposer la carte dans le chssis en
bonne position. La situation des trous tarauds sont montre dans la figure ci-
dessous.
BATT
+
Trous tarauds
Veuillez vous rfrer la figure pour installer le support dans une position ap-
proprie sur le chssis et puis de fixer la carte travers les trous tarauds sur
le support.
Important
* Pour prvenir les endommages la carte mre, il est interdit de mettre toutes
sorte de contact entre le circuit et le chssis ou de mettre un support inutile sur
le chssis.
* Veuillez vous assurer quil ny a pas de composant en mtal mis dans la carte ou
le chssis qui entranerait un court circuit la cartre mre.
48
MS-7592
Panneau arrire
Le panneau arrire dispose les connecteurs suivants :
Ligne-Out CS-Out
Installation du matriel
Ce chapitre vous indique comment installer le CPU et les mmoires, ainsi que les
jeux de cavaliers sur la carte mre. Lors de linstallation du matriel, faites atten-
tion aux composants et veuillez suivre les procdures dinstallation.
Cl dalignement Cl dalignement
49
Suivez les instructions suivantes pour installer le CPU et le ventilateur correcte-
ment. Une mauvaise installation endommagera votre CPU et la carte mre.
. Le socket CPU possde un plastique de protection.
Ne le retirez quau moment dinstaller le CPU.
2. Enlevez le chapeau de la charnire du levier.
3. On rvle les broches de la douille.
4. Ouvrez le levier de charge.
5. Levez le levier et ouvrez le plateau de charge-
ment.
6. Aprs avoir confirm la direction du CPU pour join-
dre correctement, dposez le CPU dans larmature
du logement de douille. Faites attention au bord de
sa base. Notez quon aligne les coins assortis.
7. Inspectez visuellement si le CPU est bien pos
dans la douille. Si non, sortez verticalement le CPU
prudemment et rinstallerz-la.
8. Couvez le plat de charge sur le paquet.
9. Abaissez le levier sur le plateau de chargemen,
puis scuriser lensemble avec le mcanisme de
rtention.
0. Alignez les trous de la carte avec le ventilateur.
Installez le ventilateur dans les trous de la carte
mre.
. Appuyez sur le crochets pour attacher le venti-
lateur. Puis effectuer une rotation des systmes
de rtention. (Rfrez-vous la direction correcte
marque l-dessus) afin de verrouiller le crochet.
2. Retournez la carte mre pour assurer que le venti-
lateur est correctement insr.
3. Finalement, attachez le cble du ventilateur de
CPU au connecteur du ventilateur de CPU sur la carte mre.
Important
* Lisez le statut du CPU dans le BIOS.
* Toujours protgez les pins de votre CPU avec le plastique de protection avant
que le CPU soit install afin dviter tout dommage.
* Les photos de carte montres ici ne sont que pour une dmonstration de
linstallation du CPU et son refroidissement. Lapparence de votre carte peut
varier selon le modle que vous achetez.
50
MS-7592
Encoche
Volt
Important
* Au mode Dual-Channel, assurez-vous que vous installez les modules de m-
moire du mme type et de la mme densit dans des emplacements DIMM de
canaux diffrents.
* Pour lancer avec succs votre ordinateur, insrez tout dabord les modules de
mmoire DIMM1.
51
Connecteur dalimentation ATX 24-pin : JPWR1
Ce connecteur vous permet de connecter lalimentation ATX 24-pin. Pour cela as-
surez-vous que le connecteur est bien positionn dans le bon sens et que les pins
sont alignes. Abaissez alors lalimentation dnergie dans le connteur.
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 .5 W u
3 V
.3
9 .P ro nd
V
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1
2 3.+ +5 V
4
2 2. +5 s un d
.G 5 V
2 1. Re o un d
ro
2 0. Gr o n #
u
V
2 9. Gr rou ON d
n
d
1 8. G - un
1 7. PS o
1 . r V V
1 5. -12 .3
6
1 4. +3
d
1 3.
G
1
ro un
u d
n
d
3 .+1
.+ 2
4
1 V
2
V
Important
Assurez-vous que tous les connecteurs sont relis lalimentation ATX pour as-
surer une stabilit de la carte mre.
52
MS-7592
Important
Si vous installez deux dispositifs IDE sur un mme cble, vous devez configurer le
second dans le mode cble slection ou dans le mode master / slave sparment
en configurant les cavaliers. Rfrez-vous aux documentations de dispositifs
dIDE fournits par les vendeurs pour les instructions darrangement de cavalier.
Important
Veuillez ne pas tordre le cble Srial ATA 90-degrs. Cela pourrait lendommager
et entrainer la perte de donnes lors des phases de transfert de celles-ci.
1 .+ en
.G 1 s o
.G 1 s
2 .S o
2 .S
ro 2V or l
3 .C
ro 2V or
3
u
4
u
n
n
d
53
Connecteur S/PDIF-Out : JSP1
Ce connecteur sert connecter lInterface S/PDIF (Sony & Philips Digital Intercon-
nect Format) pour une transmission numrique audio.
3 .S CC
.G P
2 .V
r o DI
1
u F
n
d
Connecteur CD-In : JCD1
Ce connecteur est fournit pour un audio externe dentrer.
1 .G ro
.L ro u
2 .G
3 .R
4
u nd
n
d
r
ake
P
Spe
o
w
zer
e
r
Buz
S
P
1
w
0
o
it
.N
w
8 -
ch
.+
e
o .
r
6 .+
P -
L
.
in
E
4 -
8
D
2
6 .-
.
.+
4 +
2
.
7 .Po sp n
.N w e d
5 .Su rou
JFP2
o e n
9 .+
3 .G
.R
P rL d
7 .-
in E LE
1
e R
5 .-
se e
JFP1
3 .+
rv e
e tS
1
D D
d
s
H
D
D
w
it
L
ch
E
D
o
6 DT N
P
.D R
in
4 SI
.
2
.
9 . R r ou T
.R T n
7 .G U
I S d
5 . SO C D
3 .D
1
54
MS-7592
1 .N IC S
0 o
.H
8 .M RE nd
e Pin et C
6 .P ou
a
d
4 Gr
P
h
2
o
.
D EN
n
e
e E
D
ct #
e
io
te
n
ct
io
n
9 S a R
.H E d
7 .He IC L
e NS P
.
5 .M I C
a E h
d
3 .M
P _S ne
h E R
1
o N
n
e D
L
o
Connecteur USB avant : JUSB1, JUSB2
Ce connecteur, compatible avec Intel I/O Connectivity Design Guide, est idal
pour connecter les USB priphrique dInterface de haute vitesse tel que USB
HDD, camra numrique, lecteur MP3, imprimants modems et etc.
1 .G
0 r B D-
.U o D
8 US B
S un +
6 .U C
B d
. S
O
4 VC
C
2
.
9 .G B D
.N ro D -
7 .US B
o u +
5 .U CC
P nd
in
3 .V
1
ro u n r
u nd
8 Se 3V ta
n
d
6 3. S
.
4 .3V
.
2
1 1.L C a dd et
e
3 P a d re
r
1 .LP C a es k
.L C d d s
P
9 LP C R loc
C ad dre ss &
7 .LP C C
F d s & d
.
ra re s
5 .L P C
m s & da ta
3 .LP
e s & da ta pi
1
re s
d ta pin 0
a p 1
ta in
p 2
in
a
3
n
55
Connecteur chssis Intrusion : JCI1
Ce connecteur est connect un cble chssis Instrusion switch. Si le chssis
est ouvert, linterrupteur en informera le systme, qui enregistrera ce statut et
affichera un cran dalerte. Pour effacer ce message dalerte, vous devez entrer
dans le BIOS et dsactiver le record.
2 .C
.G IN
1
ro T
u RU
n
d
Cavalier deffacement CMOS : JBAT1
Le CMOS RAM intgr reoit une alimentation dune batterie externe qui per-
met de garder les donnes de configuration du systme. Avec le CMOS RAM,
le systme peut automatiquement amorcer OS chaque fois quil soit allum. Si
vous voulez effacer la configuration du systme, rglez le cavalier pour effacer
les donnes.
JBAT1
1 1 1
Important
Vous pouvez effacer le CMOS en positionnant les 2-3 pin lorsque le PC nest pas
allum. Puis il faut remettre le cavalier en position 1-2 pin. Evitez surtout deffacer
le CMOS lorsque le PC est allum, cela endommagera la carte mre.
56
MS-7592
Emplacement PCIE
Lemplacement PCIE supporte la carte dextention dInterface PCIE.
Emplacement PCI
Lemplacement PCI supporte la carte LAN, la carte SCSI, la carte USB, et dautre
cartes ajoutes qui sont compatibles avec les spcifications de PCI.
Important
Lorsque vous ajoutez ou retirez une carte dextension, assurez-vous que le PC
nest pas reli au secteur. Lisez le documentation pour faire les configurations
ncessaires du matriel ou du logiciel de la carte dextension, tels que cavaliers,
commutateurs ou la configuration du BIOS.
Ordre
1 2 3 4
Emplacement
57
Rglage bios
Lorsque le PC est dmarr, le processeur de POST (Power On Self Test) se met
en route. Quand le message ci-dessous appat lcran, appuyez sur <DEL> pour
accder au Setup (Rglage).
Si le message disparat avant que vous nayez appuy sur la touche, redmarrez
le PC avec laide du bouton RESET. Vous pouvez aussi le redmarrer en utilisant
smultanment la combinaison des touches <Ctrl>, <Alt>, et <Delete>.
Page Principale
58
MS-7592
Cell Menu
59
Intel EIST
LEnhanced Intel SpeedStep technologie vous permet de configurer le niveau de
performance du microprocesseur. Ce domaine vous apparatra aprs que vous
installiez le CPU qui supporte la speedstep technologie.
Adjust CPU FSB Frequency (MHz)
Cet article vous permet dajuster la frquence du FSB du CPU.
Adjust CPU Ratio
Cet article vous permet dajuster le multiplieur dhorloge du CPU (ratio). Il est
disponible seulement quand le processeur supporte la fonction.
Adjusted CPU Frequency (MHz)
Il montre la frquence ajuste du CPU (FSB x Ratio). Lecture uniquement.
MEMORY-Z
Appuyez sur <Enter> pour entrer dans le sous-menu.
DIMM1/2 Memory SPD Information
Appuyez sur <Enter> pour entrer dans le sous-menu. Ce sous-menu affiche
linformation de la mmoire supporte.
Advance DRAM Configuration
Appuyez sur <Enter> pour entrer dans le sous-menu.
DRAM Timing Mode
Le choix du DRAM timing est contrl par SPD (Serial Presence Detect) EE-
PROM sur le module DRAM. La mise en [Auto By SPD] active le DRAM tim-
ings et les articles relatifs suivants qui seront dtermins par le BIOS bas sur
les configurations du SPD. La mise en [Manual] vous permet de configurer le
DRAM timings et les articles relatifs suivants manuellement.
CAS Latency (CL)
Lorsque le DRAM Timing Mode est mis en [Manual], ce domaine est ajustable.
Il contrle le latence CAS, qui dtermine le retard du timing (en cycle dhorloge)
avant que le SDRAM commence un ordre de lecture aprs lavoir reu.
tRCD
Lorsque le DRAM Timing Mode est mis en [Manual], ce domaine est ajustable.
Quand le DRAM est rafrachi, les rangs et les colonnes sont tous adresss
sparment. Cet article vous permet de dterminer le timing de la transition
de RAS (row address strobe) CAS (column address strobe). Moins lhorloge
fonctionne, plus vite est la performance de DRAM.
tRP
Lorsque le DRAM Timing Mode est mis en [Manual], ce domaine est ajustable.
Cet article contrle le numro de cycles pour que le Row Address Strobe (RAS)
soit permit prcharger. Sil ny a pas assez de temps pour que le RAS ac-
cumule son charge avant le refrachissement de to DRAM, le refrachissement
peut tre incomplet et le DRAM peut chouer retirer les donnes. Cet article
applique seulement quand le DRAM synchrone est install dans le systme.
tRAS
Lorsque le DRAM Timing Mode est mis en [Manual], ce domaine est ajustable.
60
MS-7592
Larticle dtermine le temps que le RAS prend pour lire ou crire une cellule
de mmoire.
tRTP
Lorsque le DRAM Timing Mode est mis en [Manual], ce domaine est ajustable.
Linterval de temps entre un ordre de lecture et de prcharge.
tRFC
Lorsque le DRAM Timing Mode est mis en [Manual], ce domaine est ajustable.
Ce rglage dtermine le temps que le RFC prend pour lire de et crire une
cellule de mmoire.
tWR
Lorsque le DRAM Timing Mode est mise en [Manual], ce domaine est ajustable.
Il spcifie la quantit de retard (en cycles dhorloge) qui doit se passer aprs
lachvement dune opration valide dcriture, avant quune active banque
puisse tre charge. Ce retard est revendiqu pour garantir que les donnes
dans le tempon dcriture puissent tre crites aux cellules de mmoire avant
lapparition du prcharge.
tRRD
Lorsque le DRAM Timing Mode est mise en [Manual], ce domaine est ajustable.
Il spcifie le retard activit--activit de banques diffrentes.
tWTR
Lorsque le DRAM Timing Mode est mise en [Manual], ce domaine est ajustable.
Cet article contrle le timing de mmoire du Write Data In Read Command
Delay. Cela constitue le numro minimum de cycles dhorloge qui sagissent
entre la dernire opration valide dcriture et lordre de lecture suivant la
mme banque internal du priphrique DDR.
FSB/DRAM Ratio
Cet article vous permet dajuster le ratio du FSB la mmoire.
Adjusted DRAM Frequency (MHz)
Il montre la frquence ajuste de la mmoire. Lecture uniquement.
Adjust PCI-E Frequency (MHz)
Cet article vous permet dajuster la frquence du PCI-E.
Auto Disable DRAM/PCI Frequency
Lorsque mis en [Enabled], le systme teindra les horloges des fentes vides de
PCI pour rduire au minimum linterface lectromagntique (EMI).
Spread Spectrum
Lorsque le gnrateur dhorloge de la carte mre fonctionne, les valeurs extrmes
(spikes) crent des interfrences lectromagntiques EMI (Electromagnetic Inter-
ference). La fonction Spread Spectrum rduit ces interfrences en rglant les im-
pultions. Si vous navez pas de problme dEMI, laissez-le sur Disabled qui vous
permet davoir une stabilit du systme et des performances optimales. Dans le
cas contraire, choisissez Enabled pour la rduction EMI. Noubliez pas de ds-
activer cette fonction si vous voulez faire de loverclocking, parce que la moindre
modification peut entrainer une acclration temporaire dhorloge et ainsi votre
processeur overclock se verrouillera.
61
Important
* Si vous navez pas de problme dEMI, laissez loption sur [Disable], ceci vous
permet davoir une stabilit du systme et des performances optimales. Dans le
cas contraire, choisissez Spread Spectrum pour rduire les EMI.
* Plus la valeur Spread Spectrum est importante, plus les EMI sont rduites, et le
systme devient moins stable. Pour la valeur Spread Spectrum la plus conven-
able, veuillez consulter le rglement EMI local.
62
MS-7592
DEUTSCH
eINLEITUNG
Danke, dass Sie das G41M-P28/ G41M-P26 (MS-7592 v5.x) Micro-ATX Main-
board gewhlt haben. Das G41M-P28/ G41M-P26 Serie basiert auf dem Intel
G41 & ICH7 Chipsatz und ermglicht so ein optimales und effizientes System.
Entworfen, um den hochentwickelten Intel Core2 Quad/ Core2 Duo/ Pen-
tium/ Celeron Prozessoren fr Sockel LGA775 zu untersttzen, stellt das
G41M-P28/ G41M-P26 Serie die ideale Lsung zum Aufbau eines professionellen
Hochleistungsdesktopsystems dar.
Layout
Top : mouse SYSFAN2
Bottom: SYSFAN1
keyboard
CPUFAN1
Top :
Parallel Port
Bottom:
COM port
VGA port
T: Line-In
M: Line-Out
IDE1
B: Mic
T:RS-Out
JTPM1
M:CS-Out
B:SS-Out
BATT
JCOM1
(optional)
+
JBAT1
JCI1
JFP1 JFP2
PCI_E1
Intel
ICH7
PCI 1
SATA3
SATA4
PCI 2
JCD1 FDD 1
SATA1
SATA2
63
SPEZIFIKATIONEN
Prozessoren
Intel Core2 Quad/ Core2 Duo/ Pentium/ Celeron Prozessoren fr
Sockel LGA775
Untersttzt Lftersteuerung ber eine 4-polige Stiftleiste
Untersttzt FMB 05a@95W
(Weitere CPU Informationen finden Sie unter
http://www.msi.com/index.php?func=cpuform2)
FSB (Front-Side-Bus)
Bis zu 1333 MHz
Chipsatz
North-Bridge: Intel G41 Chipsatz
South-Bridge: Intel ICH7 Chipsatz
Speicher
2 DDR3 1333 (OC)/1066/800 DIMM Steckpltze (max. 8GB)
(Weitere Informationen zu kompatiblen Speichermodulen finden Sie unter
http://www.msi.com/index.php?func=testreport)
LAN
Untersttzt LAN 10/100/1000 Fast Ethernet ber Atheros AR8131M (G41M-
P28)
Untersttzt LAN 10/100 Fast Ethernet ber Atheros AR8132M (G41M-P26)
Audio
VIA VT1708S 7,1-Kanal Audio-Codec
Erfllt die Azalia Spezifikationen
IDE
1 IDE Anschluss ber Intel ICH7
Untersttzt Ultra DMA 66/100 und die Betriebmodi PIO & Bus Mastering
SATA
4 SATA 3Gb/s Anschlsse ber Intel ICH7
Diskette
1 Disketten Anschluss
Untersttzt 1 Diskettenlaufwerk mit 360KB, 720KB, 1,2MB, 1,44MB and
2,88MB
Anschlsse
Hintere Ein-/ und Ausgnge
1 PS/2 Mausanschluss
1 PS/2 Tastaturanschluss
1 serieller Anschluss
1 VGA Anschluss
1 paralleler Anschluss
4 USB 2.0 Anschlsse
1 LAN Anschluss
6 Audiobuchsen (G41M-P28)
3 Audiobuchsen (G41M-P26)
64
MS-7592
65
SCHRAUBENLCHER
Wenn Sie das Mainboard zu installieren, mssen Sie das Mainboard in das Chas-
sis in der korrekten Richtung setzen. Die Standorte von Schraubenlchern auf
dem Mainboard sind wie nachfolgend gezeigt.
BATT
+
Schraubenlcher
wichtig
* Zur Verhtung von Schden auf dem Mainboard, jeglichen Kontakt zwischen
dem Mainboard Stromkreis und dem Chassis oder unntige Abstandshalter
montiert auf dem Chassis ist verboten.
* Bitte stellen Sie sicher, dass keine metallischen Komponenten auf dem Main-
board ausgesetzt ist oder innerhalb des Chassis, Kurzschluss des Mainboards
verursachen kann.
66
MS-7592
Hinteres Anschlusspanel
Das hintere Anschlusspanel verfgt ber folgende Anschlsse:
Line-Out CS-Out
HARDWARE SETUP
Dieses Kapitel informiert Sie darber, wie Sie die CPU und Speichermodule ein-
bauen, des weiteren darber, wie die Steckbrcken auf dem Mainboard gesetzt
werden. Handhaben Sie die Komponenten whrend des Einbaus vorsichtig und
halten Sie sich an die vorgegebene Vorgehensweise beim Einbau.
Die Pin-Seite der LGA 775 CPU Die Obserseite der LGA775 CPU.
Vergessen Sie nicht, etwas
Siliziumwrmeleitpaste auf die CPU
aufzutragen,um eine Ableitung der
Hitze zu erzielen.
Justierung Justierung
67
Folgen Sie den Schritten unten, um die CPU und den Khler ordnungsgem
zu installieren. Ein fehlerhafter Einbau fhrt zu Schden an der CPU und dem
Mainboard.
. Der CPU-Sockel besitzt zum Schutz eine Plastikab-
deckung. Lassen Sie vor der Installation diese Schutz-
kappe auf dem Sockel um Schden zu vermeiden.
2. Entfernen Sie zuerst die Schutzkappe wie abgebildet
in Pfeilrichtung.
3. Sie sehen jetzt die Pins des Sockels.
4. ffnen Sie den Sockelverschlusshebel.
5. Klappen Sie den Hebel ganz auf und ffnen Sie die
Metallverschlussklappe.
6. Vergewissern Sie sich anhand der Justiermarkierun-
gen und dem gelben Dreieck, da die CPU in der kor-
rekten Position ist. Setzen Sie anschlieend die CPU
in den Sockel.
7. Begutachten Sie, ob die CPU richtig im Sockel sitzt.
Falls nicht, ziehen Sie die CPU durch eine rein ver-
tikale Bewegung wieder heraus. Versuchen Sie es
erneut.
8. Schlieen Sie die Abdeckung des Sockels.
9. Drcken Sie den Verschlusshebel mit leichtem Druck
nach unten und arretieren Sie den Hebel unter dem
Rckhaltehaken des CPU-Sockels.
0. Fhren Sie den CPU-Khler ber den CPU-Sockel
und positionieren Sie die Arretierungsstifte des Kh-
lers ber die dafr vorgesehenen Lcher des Main-
boards. Drcken Sie den Khler nach unten bis die
Stifte in den Lchern eingerastet sind.
. Drcken Sie die vier Stifte nach unten um den Khler
zu arretieren. Drehen Sie dann jeweils den Verschluss
der Stifte (Richtung ist auf dem Khler markiert).
2. Drehen Sie das Mainboard um und vergewissern Sie
sich, dass das der Khler korrekt installiert ist.
3. Schlielich bringen Sie das CPU Khlerkabel zum CPU Khlerstecker auf
dem Mainboard an.
Wichtig
* Prfen Sie die Status der CPU im BIOS.
* Wenn keine CPU installiert ist, schtzen Sie immer den CPU-Sockel durch die
Plastikabdeckung.
* Die Mainboard Fotos, die in diesem Abschnitt gezeigt werden, sind fr Dem-
onstration der CPU/ Khler Installation. Das Aussehen Ihres Mainboard kann
abhngig von dem Modell schwanken, das Sie kaufen.
68
MS-7592
Kerbe
Volt
Wichtig
* Stellen Sie im Zweikanalbetrieb bitte sicher, dass Sie Module des gleichen Typs
und identischer Speicherdichte in den DIMM Slots unterschiedlicher Kanle
verwenden.
69
ATX 24-poliger Stromanschluss: JPWR1
Hier knnen Sie ein ATX 24-Pin Netzteil anschlieen. Wenn Sie die Verbindung
herstellen, stellen Sie sicher, dass der Stecker in der korrekten Ausrichtung ein-
gesteckt wird und die Pins ausgerichtet sind. Drcken Sie dann den Netzteilsteck-
er fest in den Steckersockel.
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 .5 W u
3 V
.3
9 .P ro nd
V
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1
2 3.+ +5 V
4
2 2. +5 s un d
.G 5 V
2 1. Re o un d
ro
2 0. Gr o n #
u
V
2 9. Gr rou ON d
n
d
1 8. G - un
1 7. PS o
1 . r V V
1 5. -12 .3
6
1 4. +3
d
1 3.
G
1
ro un
u d
n
d
3 .+1
.+ 2
4
1 V
2
V
Wichtig
Stellen Sie die Verbindung aller drei Anschlsse mit einem angemessenem ATX
Netzteil sicher, um den stabilen Betrieb des Mainboards sicher zu stellen.
70
MS-7592
Wichtig
Verbinden Sie zwei Laufwerke ber ein Kabel, mssen Sie das zweite Laufwerk
im Slave-Modus konfigurieren, indem Sie entsprechend den Jumper setzen. Ent-
nehmen Sie bitte die Anweisungen zum Setzen des Jumpers der Dokumentation
der Festplatte, die der Festplattenhersteller zur Verfgung stellt.
Wichtig
Bitte falten Sie das Serial ATA Kabel nicht in einem Winkel von 90 Grad. da dies
zu Datenverlusten whrend der Datenbertragung fhrt.
1 .+ en
.G 1 s o
.G 1 s
2 .S o
2 .S
ro 2V or l
3 .C
ro 2V or
3
u
4
u
n
n
d
71
S/PDIF- Ausgang: JSP1
Die SPDIF (Sony & Philips Digital Interconnect Format) Schnittstelle wird fr die
bertragung digitaler Audiodaten verwendet.
3 .S CC
.G P
2 .V
ro DI
1
u F
n
d
CD- Eingang: JCD1
Dieser Anschluss wird fr externen Audioeingang zur Verfgung gestellt.
1 .G ro
.L ro u
2 .G
3 .R
4
u nd
n
d
Spe
o
w
zer
e
r
Buz
S
P
1
w
0
o
it
.N
w
8 -
ch
.+
e
o .
r
6 .+
P -
L
.
in
E
4 -
8
D
2
6 .-
.
.+
4 +
2
.
7 .Po sp n
.N w e d
5 .Su rou
JFP2
o e n
9 .+
3 .G
.R
P rL d
7 .-
in E LE
1
e R
5 .-
se e
JFP1
3 .+
rv e
e tS
1
D D
d
s
H
D
D
w
it
L
ch
E
D
o
6 DT N
P
.D R
in
4 SI
.
2
.
9 . R r ou T
.R T n
7 .G U
I S d
5 . SO C D
3 .D
1
72
MS-7592
1 .N IC S
0 o
.H
8 .M RE nd
e Pin et C
6 .P ou
a
d
4 Gr
P
h
2
o
.
D EN
n
e
e E
D
ct #
e
io
te
n
ct
io
n
9 S a R
.H E d
7 .He IC L
e NS P
.
5 .M I C
a E h
d
3 .M
P _S ne
h E R
1
o N
n
e D
L
o
USB Frontanschluss: JUSB1, JUSB2
Der Anschluss entspricht den Richtlinien des Intel Front Panel I/O Connectivity
Design Guide, und ist bestens geeignet, Hochgeschwindigkeits- USB- Periph-
eriegerte anzuschlieen, wie z.B. USB Festplattenlaufwerke, Digitalkameras,
MP3-Player, Drucker, Modems und hnliches.
1 .G
0 r B D-
.U o D
8 US B
S un +
6 .U C
B d
. S
O
4 VC
C
2
.
9 .G B D
.N ro D -
7 .US B
o u +
5 .U CC
P nd
in
3 .V
1
ro u n r
u nd
8 Se 3V ta
n
d
6 3. S
.
4 .3V
.
2
1 1.L C a dd et
e
3 P a d re
r
1 .LP C a es k
.L C d d s
P
9 LP C R loc
C ad dre ss &
7 .LP C C
F d s & d
.
ra re s
5 .L P C
m s & da ta
3 .LP
e s & da ta pi
1
re s
d ta pin 0
a p 1
ta in
p 2
in
a
3
n
73
Gehusekontaktanschluss: JCI1
Dieser Anschluss wird mit einem Kontaktschalter verbunden. Wird das Gehuse
geffnet, wird der Schalter geschlossen und das System zeichnet dies auf und gibt
auf dem Bildschirm eine Warnung aus. Um die Warnmeldung zu lschen, muss
das BIOS aufgerufen und die Aufzeichnung gelscht werden.
2 .C
.G IN
1
ro T
u RU
n
d
Steckbrcke zur CMOS-Lschung: JBAT1
Der Onboard CMOS Speicher wird ber eine Betterie mit Strom versotgt, damit
die Daten nach Abschalten des PC-systems erhalten bleiben. Weiterhin sind In-
formationen fr den Start des Systems in dem Speicher hinterlegt. Sollten Sie
Fehlermeldungen whrend des Startvorganges erhalten, kann ein Zurcksetzen
des CMOS Speichers in den ursprnglichen Werkszustand helfen. Drcken Sie
dazu leicht den Schalter.
JBAT1
1 1 1
Wichtig
Sie knnen den CMOS lschen, indem Sie die Pins 2-3 verbinden, whrend das
System ausgeschaltet ist. Kehren Sie danach zur Pinposition 1-2 zurck. Lschen
Sie den CMOS nicht, solange das System angeschaltet ist, dies wrde das Main-
board beschdigen.
74
MS-7592
PCIE Steckplatz
Der PCIE-Steckplatz untersttzt eine Erweiterungskarte mit der PCIE-Schnitt-
stelle.
PCI Steckplatz
Der PCI-Steckplatz kann LAN-Karten, SCSI-Karten, USB-Karten und sonstige Zu-
satzkarten aufnehmen, die mit den PCI-Spezifikationen konform sind.
Wichtig
Achten Sie darauf, dass Sie zuerst das Netzkabel aus der Steckdose herauszie-
hen, bevor Sie eine Erweiterungskarte installieren oder entfernen. Denken Sie
bitte auch daran die Dokumentation der Erweiterungskarte zu lesen, um notwen-
dige Hardware- oder Softwareeinstellungen fr die Erweiterungskarte wie z.B.
Jumper-, Schalter- oder BIOS-Einstellungen vorzunehmen.
PCI-Unterbrechungsanforderungs-Routing
Eine IRQ (Interrupt Request; Unterbrechungsanforderung)-Leitung ist eine Hard-
wareleitung, ber die ein Gert Unterbrechungssignale zu dem Mikroprozessor
schicken kann. Die PCI IRQ-Pole werden in der Regel mit dem PCI-Bus-Polen
wie folgt verbunden:
Folge
1 2 3 4
Steckplatz
75
BIOS Setup
Nach dem Einschalten beginnt der Computer den POST (Power On Self Test
Selbstberprfung nach Anschalten). Sobald die Meldung unten erscheint
drcken Sie die Taste <DEL> , um das Setup aufzurufen.
Press DEL to enter SETUP
(ENTF drcken, um das Einstellungsprogramm zu ffnen)
Sollten Sie die Taste nicht rechtzeitig gedrckt haben und somit den Start des
BIOS verpasst haben, starten Sie bitte Ihr System neu. Entweder drcken Sie
dazu den Power On / Anschalter oder den Reset Knopf. Alternativ bettigen
Sie die Tastenkombination <Ctrl>, <Alt> und <Delete>, um einen Neustart zu er-
zwingen.
Main Page
76
MS-7592
Green Power
Verwenden Sie dieses Men um Einstellungen der Stromversorgung vorzunehm-
en.
BIOS Setting Password
Verwenden Sie dieses Men, um das Kennwort fr das BIOS einzugeben.
Cell Menu
Hier knnen Sie Einstellungen zu Frequenzen/Spannungen und bertaktung
vornehmen.
M-Flash
In diesem Men knnen Sie das BIOS vom Speicher-Antrieb abtasten/ aufblinken
(nur FAT/ FAT32 Format).
Load Fail-Safe Defaults
Hier knnen Sie die BIOS- Werkseinstellungen fr stabile Systemleistung laden.
Load Optimized Defaults
In diesem Men knnen Sie eine stabile, werkseitig gespeicherte Einstellung des
BIOS Speichers laden.
Save & Exit Setup
Abspeichern der BIOS-nderungen im CMOS und verlassen des BIOS.
Exit Without Saving
Verlassen des BIOS ohne Speicherung, vorgenommene nderungen verfallen.
Cell Menu
77
CPU Technology Support
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen. Das
Untermen zeigt die Technologien des verwendeten Prozessors an.
Intel EIST
Die erhhte Intel SpeedStep Technologie erlaubt Ihnen, den Leistungsgrad des
Mikroprozessors einzustellen. Dieses Figur erscheint, nachdem Sie das CPU an-
bringen, das Speedstep Technologie sttzen.
Adjust CPU FSB Frequency (MHz)
Hier knnen Sie die CPU FSB Frequenz angeben.
Adjust CPU Ratio
Hier knnen Sie die CPU -Taktmultiplikator (Ratio) angeben. Dieser Eintrag ist nur
verfgbar, wenn der Prozessor diese Funktion untersttzt (freier Multiplikator).
Adjusted CPU Frequency (MHz)
Gibt die Frequenz der CPU (FSB x Ratio) an. Nur Anzeige keine nderung
mglich.
MEMORY-Z
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen.
DIMM1/2 Memory SPD Information
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen, das die
Informationen angebrachtes Speicheran zeigt.
Advance DRAM Configuration
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen.
DRAM Timing Mode
Whlen Sie aus, ob DRAM-Timing durch das SPD (Serial Presence Detect)
EEPROM auf dem DRAM-Modul gesteuert wird. Die Einstellung [Auto By SPD]
ermglicht die automatische Erkennung des DRAM timings durch das BIOS auf
Basis der Einstellungen im SPD. Das Vorwhlen [Manual] eingestellt, knnen
Sie den DRAM Timing anpassen.
CAS Latency (CL)
Lautet die Einstellung unter DRAM Timing [Manual], knnen Sie hier die DRAM
Timing angeben. Hier wird die Verzgerung im Timing (in Taktzyklen) ein-
gestellt, bevor das SDRAM einen Lesebefehl nach dessen Erhlt auszufhren
beginnt.
tRCD
Lautet die Einstellung unter DRAM Timing [Manual], knnen Sie hier die DRAM
Timing angeben. Wenn DRAM erneuert wird, werden Reihen und Spalten
separat adressiert. Gestattet es, die Anzahl der Zyklen der Verzogerung im
Timing einzustellen, die zwischen den CAS und RAS Abtastsignalen liegen,
die verwendet werden, wenn der DRAM beschr ieben, ausgelesen oder auf-
gef rischt wird. Eine hohe Geschwindigkeit fuhrt zu hoherer Leistung, whrend
langsamere Geschwindigkeiten einen stabileren Betrieb bieten.
tRP
Lautet die Einstellung unter DRAM Timing [Manual], knnen Sie hier die DRAM
Timing angeben. Legt die Anzahl der Taktzyklen fest, die das Reihenadress-
78
MS-7592
79
Spread Spectrum
Pulsiert der Taktgenerator des Motherboards, erzeugen die Extremwerte (Spit-
zen) der Pulse EMI (Elektromagnetische Interferenzen). Die Spread Spectrum
Funktion reduziert die erzeugten EMI, indem die Pulse so moduliert werden, das
die Pulsspitzen zu flacheren Kurven reduziert werden. Sollten Sie keine Probleme
mit Interferenzen haben, belassen Sie es bei der Einstellung [Disabled] (ausge-
schaltet), um bestmgliche Systemstabilitt und -leistung zu gewhrleisten. Stellt
fr sie EMI ein Problem dar, whlen Sie die gewnschte Bandbreite zur Reduktion
der EMI. Denken Sie daran Spread Spectrum zu deaktivieren, wenn Sie ber-
takten, da sogar eine leichte Schwankung eine vorbergehende Taktsteigerung
erzeugen kann, die gerade ausreichen mag, um Ihren bertakteten Prozessor
zum einfrieren zu bringen.
Wichtig
* Sollten Sie keine Probleme mit Interferenzen haben, belassen Sie es bei der
Einstellung [Disabled] (ausgeschaltet), um bestmgliche Systemstabilitt und
-leistung zu gewhrleisten. Stellt fr sie EMI ein Problem dar, whlen Sie die
gewnschte Bandbreite zur Reduktion der EMI.
* Je grer Spread Spectrum Wert ist, desto grer nimmt der EMI ab, und das
System wird weniger stabil. Bitte befragen Sie Ihren lokalen EMI Regelung zum
meist passend Spread Spectrum Wert.
80
MS-7592
G41M-P28/ G41M-P26
(MS-7592 v5.x) Micro-ATX.
G41M-P28/ G41M-P26 Intel G41 &
ICH7. Intel
Core2 Quad/ Core2 Duo/ Pentium/ Celeron LGA775
.
Top : mouse SYSFAN2
Bottom: SYSFAN1
keyboard
CPUFAN1
Top :
Parallel Port
Bottom:
COM port
VGA port
JPWR1
USB ports
T: Line-In
M: Line-Out
IDE1
B: Mic
T:RS-Out
JTPM1
M:CS-Out
B:SS-Out
BATT
JCOM1
(optional)
+
JBAT1
JCI1
JFP1 JFP2
PCI_E1
Intel
ICH7
PCI 1
SATA3
SATA4
PCI 2
JCD1 FDD 1
SATA1
SATA2
81
Intel Core2 Quad/ Core2 Duo/ Pentium/ Celeron
LGA775
4-
FMB 05a@95W
( CPU,
http://www.msi.com/index.php?func=cpuform2)
FSB
1333
: Intel G41
: Intel ICH7
2 DDR3 1333 (OC)/1066/800 DIMM (8 Max)
( ,
http://www.msi.com/index.php?func=testreport)
LAN
LAN 10/100/1000 Fast Ethernet Atheros AR8131M
(G41M-P28)
LAN 10/100 Fast Ethernet Atheros AR8132M
(G41M-P26)
VIA VT1708S 7.1-
Azalia 1.0
IDE
1 IDE Intel ICH7
Ultra DMA 66/100, PIO & Bus Master
SATA
4 SATA 3/ Intel ICH7
1
1 FDD 360, 720, 1.2MB, 1.44 2.88
I/O
1 PS/2
1 PS/2
1
1 VGA
1
4 USB 2.0
1 LAN
6 (G41M-P28)
3 (G41M-P26)
82
MS-7592
,
2 USB 2.0
1 S/PDIF-Out
1 CD-In
1
1
1
1 TPM
1 PCIE x16
2 PCI, PCI 3.3V/ 5V
Micro-ATX (200 x 245)
http://www.msi.com/index.php
83
. .
,
/
.
BATT
+
* ,
.
* ,
,
.
84
MS-7592
LAN
RS-
CS-
,
.
, .
LGA775
. , ,
,
.
1 . 1 .
85
.
.
.
,
.
,
.
2. , .
3. .
4. .
5.
.
6.
, .
,
.
7.
.
,
.
8. .
9.
.
.
0.
.
,
.
. .
( )
.
2. ,
.
3. ,
.
86
MS-7592
* BIOS.
* ,
.
* , ,
.
, .
87
. .
.
2. DIMM .
,
DIMM . DIMM ,
.
3. , DIMM
.
* ,
.
* , DIMM1.
88
MS-7592
1 1.+ +1 B OK
2 1 2
1 0. VS R nd
.+ 2 V
1 5
3 V
.3
9 .P ro nd
.
V
8 .G 5V u
7 .+ ro nd
W
6 .G 5V u
5 .+ ro 3V
u
4 .G 3. 3V
3 .+ 3.
2 .+
1
2 3.+ +5 V
4
2 2. +5 s un d
.G 5 V
2 1. Re o un d
ro
2 . r o n #
u
V
2 9. Gr rou ON d
n
0
d
1 8. G - un
1 7. PS o
G
1 6. Gr V V
1 5. -12 .3
1 4. +3
d
1 3.
1
4- ATX: JPWR2
4-.
.
1 .G
.G ro
2
ro un
u d
n
d
3 .+1
.+ 2
4
1 V
2
V
* , ATX .
FDD: FDD1
360, 720, 1.2,
1.44 2.88.
89
IDE: IDE1
IDE,
IDE .
,
master / slave .
.
Serial ATA.
.
1 .+ en
.G 1 s o
.G 1 s
2 .S o
2 .S
ro 2V or l
3 .C
ro 2V or
3
u
4
u
n
n
d
90
MS-7592
S/PDIF-Out: JSP1
S/PDIF (Sony &
Philips Digital Interconnect Format) .
3 .S CC
.G P
2 .V
ro DI
1
u F
n
d
CD-In: JCD1
.
1 .G ro
.L ro u
2 .G
3 .R
4
u nd
n
d
: JFP1, JFP2
. JFP1 Intel Front Panel I/O Connectivity
Design Guide.
r
ake
P
Spe
o
w
zer
e
r
Buz
S
P
1
w
0
o
it
.N
w
8
ch
.+
e
o 8. +
r
6 .+
P -
L
.-
in
E
4 -
D
2
6 .-
.
.
4 +
2
.
7 .Po sp n
.N w e d
5 .Su rou
JFP2
o e n
9 +
3 .G
.R
P rL d
7 .-
in E LE
1
e R
.
5 .-
se e
JFP1
3 .+
rv e
e tS
1
D D
d
s
H
D
D
w
it
L
ch
E
D
: JCOM1
16550A,
16- FIFO.
.
1 .C
0 T R
.N S
8 DS R
o
6 DT N
P
.
in
4 SI
.
2
.
9
.R T u n
7 .G U
I S d
. R
5 . SO C D
3 .D
r o T
1
91
: JAUD1
.
Intel Front Panel I/O Connectivity Design Guide.
1 N IC S
0 o
.H
8 .M RE nd
.
e Pin et C
6 .P ou
a
d
4 Gr
P
h
2
o
.
D EN
n
e
e E
D
ct #
e
io
te
n
ct
io
n
9 .S a R
.H E d
7 .He IC L
e NS P
5 .M I C
a E h
d
3 .M
P _S ne
h E R
1
o N
n
e D
L
o
USB : JUSB1, JUSB2
, Intel I/O Connectivity Design
Guide,
USB HDD, , MP3 , ,
..
1 .G S BD
0 r B -
.U o D
8 U
S un +
6 .U C
B d
. S
O
4 VC
C
2
.
9 G B D
.N ro D -
7 .US B
o u +
.
5 .U CC
P nd
in
3 .V
1
TPM : JTPM1
TPM (Trusted Platform Module)
.
TPM.
1 2 . G o P o IR w e y p
4
1 0.N V ial o b
.G ro Pi we Q r ow
1 .5 er P nd
ro u n r
u nd
8 S 3V ta
n
d
6 3. S
.
4 .3V
.
2
1 1.L C a dd et
e
3 P a d re
r
1 .LP C a es k
.L C d d s
P
9 .LP C R loc
C ad dre ss &
7 .LP C C
F d s & d
ra re s
5 .L P C
m s & da ta
3 .LP
e s & da ta pi
1
re s
d ta pin 0
a p 1
ta in
p 2
in
a
3
n
92
MS-7592
: JCI1
,
.
.
. BIOS.
2 .C
.G IN
1
ro T
u RU
n
d
CMOS: JBAT1
CMOS ,
. , CMOS ,
.
( CMOS), .
JBAT1
1 1 1
CMOS 2-3
. 1-2.
CMOS : .
93
PCIE
PCIE
PCIE.
PCI
PCI LAN, SCSI, USB
,
PCI.
, .
(,
BIOS).
PCI
IRQ - interrupt request (line) - ,
,
. PCI IRQ PCI
:
1 2 3 4
94
MS-7592
BIOS
. POST
( ).
, <DEL> .
Main Page
95
BIOS Setting Password ( BIOS)
, .
Cell Menu ( Cell)
.
M-Flash
/ BIOS (
FAT/ FAT32).
Load Fail-Safe Defaults
BIOS,
.
Load Optimized Defaults ( )
.
Save & Exit Setup ( )
CMOS .
Exit Without Saving
.
Cell Menu
96
MS-7592
97
tRP
DRAM Timing Mode [Manual],
. ,
Row Address Strobe (RAS).
, RAS ,
DRAM .
, DRAM.
tRAS
DRAM Timing Mode [Manual],
. , RAS
.
tRTP
DRAM Timing Mode [Manual],
. .
tRFC
DRAM Timing Mode [Manual],
. , RFC
.
tWR
DRAM Timing Mode [Manual],
. (
),
.
, ,
.
tRRD
DRAM Timing Mode [Manual],
.
.
tWTR
DRAM Timing Mode [Manual],
. Write Data In Read
Command Delay. ,
DDR.
FSB/DRAM Ratio
FSB
.
Adjusted DRAM Frequency (MHz)
. .
Adjust PCI-E Frequency (MHz)
PCI-E.
98
MS-7592
* , [Disabled]
() . ,
, Spread Spec-
trum .
* Spread Spectrum,
, .
Spread Spectrum,
, .
* Spread Spectrum,
. ,
.
99
BIOS
, .
100
MS-7592
CPUFAN1
Top :
Parallel Port
Bottom:
COM port
VGA port
JPWR1
USB ports
T: Line-In
M: Line-Out
IDE1
B: Mic
T:RS-Out
JTPM1
M:CS-Out
B:SS-Out
BATT
JCOM1
(optional)
+
JBAT1
JCI1
JFP1 JFP2
PCI_E1
Intel
ICH7
PCI 1
SATA3
SATA4
PCI 2
JCD1 FDD 1
SATA1
SATA2
101
LGA775 Intel Core2 Quad/ Core2 Duo/ Pentium/ Celeron
4 CPU
FMB 05a@95W
(CPU,
http://www.msi.com/index.php?func=cpuform2)
FSB
1333 MHz
: Intel G41
: Intel ICH7
2 DDR3 1333 ()/1066/800 DIMM ( 8GB)
,
http://www.msi.com/index.php?func=testreport
LAN
Atheros AR8131M (G41M-P28) 10/100/1000
Atheros AR8132M (G41M-P26) 10/100
VIA VT1708S 7.1
Azalia 1.0
IDE
Intel ICH7 1 IDE
Ultra DMA 66/100PIO
SATA
Intel ICH7 4 SATA 3Gb/s
1
1 360KB720KB1.2MB1.44MB 2.88MB
I/O
1 PS/2
1 PS/2
1
1 VGA
1
4 USB 2.0
1 LAN
6 (G41M-P28)
3 (G41M-P26)
102
MS-7592
2 USB 2.0
1 S/PDIF-Out
1 CD-In
1
1
1
1 TPM
1 PCIE x16
2 PCI 3.3V/ 5V PCI
http://www.msi.com/index.php
103
BATT
+
104
MS-7592
LAN
Line-In RS-Out
Line-Out CS-Out
CPU
LGA775 CPU
CPUCPU
Pin1 Pin1
105
CPUCPU
. CPUCPU
CPU
2.
3.
4.
5. CPU
6. CPUCPU
CPUCPU
7. CPU
CPU
8.
9.
0.
.
2.
3. CPUCPU
* BIOSCPU
* CPUCPU
* CPU/
106
MS-7592
.
2. DIMM
3.
* DIMM1
107
ATX 24-PinATX 24-Pin
V
.3 1 4. +3
3 V 1 3.
.+ 2 V
2 1 2 1 d
1 1.+ +1 B OK n
4-Pin CPU
1 0. VS R nd u d
ATX 24-Pin JPWR1
ro un
FDD1
2 .+
1
108
MS-7592
IDE IDE1
IDEIDE
ATA SATA1 ~ 4
ATAATA
ATA90
CPUFAN1SYSFAN1SYSFAN2
+12V
+12VGND
CPUFAN1 SYSFAN1/2
1 .+ en ntr
1 .+ en
.G 1 s o
.G 1 s
2 .S o
2 .S
ro 2V or l
3 .C
ro 2V or
3
u
4
u
n
n
d
109
LED JFP1Intel I/O
16FIFOs16550A
S/PDIFSony & Philips
D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 .Su rou
3 .G
1
.+
8 -
.
6 .+
4 -
JFP2
zer
.
2
Buz
r
I S d
ake
.R T n
9 . R r ou T
Spe
d d
n n 7 .G U
u F u nd
ro DI .L ro u 5 . SO C D
.G P 1 .G ro 3 .D
3 .S CC 2 .G 1
2 .V ch
1
3 .R it in
4 d w P
e tS o
rv e D .N S
se e
s E 0 T R
e R L 1 .C S
8
.R D .D R
6 DT N
JFP1 JFP2
9 .+ D
H .
7 .- 4 SI
.
5 .- 2
3 .+
S/PDIF-Out : JSP1
JCOM1
1
in
P -
o .8
.+
CD-In JCD1
.N 6 .-
0
1
JFP1
4 +
ch .
it 2
w
S D
r E
e L
w r
o e
P w
o
P
110
111
MS-7592
Intel I/OUSB
USBMP3
3
in
p 2
L ta in
e D a p 1
n
o N d ta pin 0
h E R e s & da ta pi
n
P _S ne
d o m s & da ta
a E h ra re s a
e NS P in F d s & d
.H E d P nd C ad dre ss &
9 S a R
. o u + P re s
7 .He IC L .N ro D - .L C d d s
9 .G B D 3 P a d re
5 .M I C
7 .US B 1 1.L C a dd et
3 .M S
5 .U CC 1 .LP C a es k
1 9 LP C R loc
.
n 3 .V 7 .LP C C
io 1
5 .L P C
ct C
te O 3 .LP
a e E
e Pin et C 4 VC ro u n r e
r
.H D EN .
.G ro Pi we Q r ow
0 o 2
1 .N IC S 4
1 2 . G o P o IR w e y p
TPM JTPM1
8 .M RE nd 1 0.N V ial o b
6 .P ou
4 Gr 1 .5 r P nd
. 8 Se 3V ta
.
2 6 3. S
.
4 .3V
2
JCI1
BIOS
2 .C
.G IN
1
ro T
u RU
n
d
CMOS JBAT1
CMOS RAM
CMOS RAM
JBAT1
1 1 1
2-3CMOS1-2
CMOS
112
MS-7592
PCIE
PCIE PCIE
PCI
PCI SCSI USB PCI
BIOS
PCI
IRQI-R-Q
PCIIRQPCI:
1 2 3 4
113
BIOS
POST()
<DEL>
Setup
RESET<Ctrl><Alt><De-
lete>
114
MS-7592
M-Flash
BIOS( FAT/FAT32 )
Load Fail-Safe Defaults
BIOS
Load Optimized Defaults
BIOS
Save & Exit Setup
CMOSSetup
Exit Without Saving
CMOSSetup
115
Adjusted CPU Frequency (MHz) CPU MHz
CPU (FSB x Ratio)
MEMORY-Z
<Enter>
DIMM1/2 Memory SPD Information SPD
<Enter>
116
MS-7592
tWTR
DRAM Timing Mode [Manual]
DDR
FSB/DRAM RatioFSB/DRAM
FSB/
Spread Spectrum
EMI
Dis-
abled
Enabled
* EMI
[Disabled]EMISpread Spectrum
EMI
* Spread SpectrumEMI
Spread SpectrumEMI
* Spread Spectrum
117
118
MS-7592
CPUFAN1
Top :
Parallel Port
Bottom:
COM port
VGA port
JPWR1
USB ports
T: Line-In
M: Line-Out
IDE1
B: Mic
T:RS-Out
JTPM1
M:CS-Out
B:SS-Out
BATT
JCOM1
(optional)
+
JBAT1
JCI1
JFP1 JFP2
PCI_E1
Intel
ICH7
PCI 1
SATA3
SATA4
PCI 2
JCD1 FDD 1
SATA1
SATA2
119
LGA775 Intel Core2 Quad/ Core2 Duo/ Pentium/ Celeron
4-pin
FMB 05a@95W
( CPU
http://www.msi.com/index.php?func=cpuform2)
FSB
1333 MHz
: Intel G41
: Intel ICH7
2 DDR3 1333 ()1066/ 800 SDRAM ( 8GB)
(
http://www.msi.com/index.php?func=testreport)
LAN
Atheros AR8131M LAN 10/100/1000 (G41M-P28)
Atheros AR8132M LAN 10/100 (G41M-P26)
VIA VT1708S 7.1
Azalia 1.0
IDE
Intel ICH7 1 IDE
Ultra DMA 66/100, PIO
SATA
Intel ICH7 4 SATA 3Gb/s
1
1 360KB, 720KB, 1.2MB, 1.44MB 2.88MB
1 PS/2
1 PS/2
1
1 VGA
1
4 USB2.0
1
6 (G41M-P28)
3 (G41M-P26)
120
MS-7592
2 USB 2.0
1 S/PDIF-Out
1 CD-In
1
1
1
1 TPM
1 PCIE x16
2 PCI , 3.3V/ 5V PCI
http://tw.msi.com
121
BATT
+
122
MS-7592
LAN
RS-
CS-
LGA775
Pin1 Pin1
123
. CPU CPU
CPU
2.
3.
4.
5.
6. CPU
7. CPU
CPU
8.
9.
0.
. (
)
2.
3. CPU CPU
* BIOS CPU
* CPU CPU
124
MS-7592
.
2.
3.
* DIMM1
125
ATX 24-pin ATX 24-pin
u
ro
V
.G 5 V
4
2 3.+ +5 V d
2 2. +5 s un d
2 1. Re o un d V
2 0. Gr o n # 2
1 V
2 9. Gr rou ON d .+ 2
1 8. G - un 3 .+1
1 7. PS o 4
1 . r V V
6 G
V 1 5. -12 .3
.3 1 4. +3
3 V 1 3.
.+ 2 V
2 1 2 1 d
1 1.+ +1 B OK n
u d
1 0. VS R nd
ATX 24-Pin JPWR1
ro un
CPU
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
FDD1
1
126
MS-7592
IDE IDE1
IDE
Serial ATA 90
CPUFAN1 SYSFAN1/2
1 .+ en ntr
1 .+ en
.G 1 s o
.G 1 s
2 .S o
2 .S
ro 2V or l
3 .C
ro 2V or
3
u
4
u
n
n
d
127
LED JFP1 Intel /
S/PDIF (Sony & Philip Digital Interconnect Format)
16 FIFO 16550A
D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 .Su rou
3 .G
1
.+
8 -
.
6 .+
4 -
JFP2
zer
.
2
Buz
r
I S d
ake
.R T n
9 . R r ou T
Spe
d d
n n 7 .G U
u F u nd
ro DI .L ro u 5 . SO C D
.G P 1 .G ro 3 .D
3 .S CC 2 .G 1
2 .V ch
1
3 .R it in
4 d w P
e tS o
rv e D .N S
se e
s E 0 T R
e R L 1 .C S
8
.R D .D R
9 .+ D 6 DT N
H .
7 .- 4 SI
.
5 .- 2
3 .+
S/PDIF-Out JSP1
JFP1, JFP2
in
JCOM1
P -
o .8
.+
CD-In JCD1
.N 6 .-
0
JFP1
4 +
ch .
it 2
w
S D
r E
e L
w r
o e
P w
o
P
128
129
MS-7592
Intel / USB
USB MP3
TPM
Intel /
3
in
p 2
L ta in
e D a p 1
n
o N d ta pin 0
h E R e s & da ta pi
n
P _S ne
d o m s & da ta
a E h ra re s a
e NS P in F d s & d
.H E d P nd C ad dre ss &
9 S a R
. o u + P re s
7 .He IC L .N ro D - .L C d d s
9 .G B D 3 P a d re
5 .M I C
7 .US B 1 1.L C a dd et
3 .M S
5 .U CC 1 .LP C a es k
1 9 LP C R loc
.
n 3 .V 7 .LP C C
io 1
5 .L P C
ct C
te O 3 .LP
e B d 1
D S un +
e .U o D
o
n 0 r B D-
n 1 .G
P
h io 8 US B d
d ct # . S
6 .U C n
u nd
e E
1 0.N V ial o b
6 .P ou
4 Gr 1 .5 r P nd
. 8 Se 3V ta
.
TPM JTPM1
2 6 3. S
.
4 .3V
2
JCI1
BIOS
2 .C
.G IN
1
ro T
u RU
n
d
CMOS JBAT1
CMOS RAMCMOS RAM
JBAT1
1 1 1
2-3 CMOS 1-2
CMOS
130
MS-7592
PCIE
PCIE PCIE
PCI
PCI SCSI USB PCI
BIOS
PCI
IRQ (Interrupt request line)
PCI IRQ PCI
1 2 3 4
131
BIOS
POST ()
<DEL>
RESET <Ctrl><Alt> <Delete>
132
MS-7592
Cell Menu
M-Flash
(FAT FAT32 ) flash BIOS
Load Fail-Safe Defaults
BIOS
Load Optimized Defaults
BIOS
Save & Exit Setup
CMOS
Exit Without Saving
Cell Menu
133
Adjust CPU Ratio
CPU (ratio)
Adjusted CPU Frequency (MHz)
CPU (FSB x Ratio)
MEMORY-Z
<Enter>
DIMM1/2 Memory SPD Information
<Enter>
Advance DRAM Configuration
<Enter>
DRAM Timing Mode
DRAM DRAM SPD EEPROM
[Auto by SPD] BIOS SPD DRAM
[Manual] DRAM
CAS Latency (CL)
DRAM Timing Mode [Manual]
(CAS) SDRAM
()
tRCD
DRAM Timing Mode [Manual] DRAM
(RAS) (CAS)
tRP
DRAM Timing Mode [Manual]
(RAS)
tRAS
DRAM Timing Mode [Manual] RAS
tRTP
DRAM Timing Mode [Manual]
tRFC
DRAM Timing Mode [Manual] RFC
tWR
DRAM Timing Mode [Manual]
()
134
MS-7592
tRRD
DRAM Timing Mode [Manual]
active-to-active
tWTR
DRAM Timing Mode [Manual]
DDR
FSB/DRAM Ratio
FSB
Adjusted DRAM Frequency (MHz)
135
* (EMI) [Disabled]
EMI
136
MS-7592
CPUFAN1
Top :
Parallel Port
Bottom:
COM port
VGA port
JPWR1
USB ports
T: Line-In
M: Line-Out
IDE1
B: Mic
T:RS-Out
JTPM1
M:CS-Out
B:SS-Out
BATT
JCOM1
(optional)
+
JBAT1
JCI1
JFP1 JFP2
PCI_E1
Intel
ICH7
PCI 1
SATA3
SATA4
PCI 2
JCD1 FDD 1
SATA1
SATA2
137
LGA775 Intel Core2 Quad/ Core2 Duo/ Pentium/ Celeron
4CPU
FMB 05a@95W
(CPUWeb
http://www.msi.com/index.php?func=cpuform2)
FSB
1333 MHz
: Intel G41
: Intel ICH7
DDR3 1333 (OC)/1066/800 DIMM2 (8GB)
(Web
http://www.msi.com/index.php?func=testreport)
LAN
Atheros AR8131M LAN 10/100/1000
(G41M-P28)
Atheros AR8132M LAN 10/100 (G41M-
P26)
VIA VT1708S 7.1
Azalia 1.0
IDE
Intel ICH7IDE1
Ultra DMA 66/100, PIO &
SATA
Intel ICH7SATA 3Gb/s4
1
360KB720KB1.2MB1.44MB2.88MBFDD1
I/O
PS/2 1
PS/2 1
1
VGA 1
1
USB 2.0 4
LAN 1
6 (G41M-P28)
3 (G41M-P26)
138
MS-7592
USB 2.0 2
S/PDIF 1
CD 1
1
1
1
TPM 1
PCIE x16 1
PCI 23.3V/ 5V PCI
Web
http://www.msi.com/index.php
139
I/O
BATT
+
* /
140
MS-7592
I/O
LAN
Line-In RS-Out
Line-Out CS-Out
LGA775 CPU
CPU
CPU
CPU
1 1
141
CPU
CPU
. CPU
2.
3. CPU
4.
5.
6. CPUalignment key()CPU
[]
7. CPU
8.
9.
0. CPU
.
2.
3. CPU
CPU
* CPUBIOS
* CPU
142
MS-7592
.
2. DIMMDIMMDIMM
3.
* DIMM1
143
ATX24
360KB720KB1.2MB1.44MB2.88MB
d
n
u
4CPU
ro
V
.G 5 V
4
2 3.+ +5 V d
2 2. +5 s un d
2 1. Re o un d V
2 0. Gr o n # 2
1 V
2 9. Gr rou ON d .+ 2
1 8. G - un 3 .+1
1 7. PS o 4
1 . r V V
6 G
1 5. -12 .3
ATX 24: JPWR1
V
.3 1 4. +3
ATX 4: JPWR2
3 V 1 3.
.+ 2 V
2 1 2 1 d
1 1.+ +1 B OK n
u d
1 0. VS R nd ro un
1 .5 W u
9 .P ro nd .G ro
1 .G
8 .G 5V u 2
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
FDD: FDD1
3 .+ 3.
2 .+
1
144
MS-7592
IDE: IDE1
IDEIDE
22
ATA: SATA1 ~ 4
ATA
ATA
ATA90
CPUFAN1 SYSFAN1/2
1 .+ en ntr
1 .+ en
.G 1 s o
.G 1 s
2 .S o
2 .S
ro 2V or l
3 .C
ro 2V or
3
u
4
u
n
n
d
145
S/PDIF: JSP1
5.1/7.1
3 .S CC
.G P
2 .V
ro DI
1
u F
n
d
CD: JCD1
1 .G ro
.L ro u
2 .G
3 .R
4
u nd
n
d
: JFP1, JFP2
LED
JFP1
r
ake
P
Spe
o
w
zer
e
r
Buz
S
P
1
w
0
o
it
.N
w
8 -
ch
.+
e
o .
r
6 .+
P -
L
.
in
E
4 -
8
D
2
6 .-
.
.+
4 +
2
.
7 .Po sp n
.N w e d
5 .Su rou
JFP2
o e n
9 .+
3 .G
.R
P rL d
7 .-
in E LE
1
e R
5 .-
se e
JFP1
3 .+
rv e
e tS
1
D D
d
s
H
D
D
w
it
L
ch
E
D
: JCOM1
16550A16FIFO
1 .C S
0 T R
.N S
8
o
6 DT N
P
.D R
in
4 SI
.
2
.
9 . R r ou T
.R T n
7 .G U
I S d
5 . SO C D
3 .D
1
146
147
MS-7592
e NS P a
in F d s & d
.H E d P nd C ad dre ss &
9 S a R
. o u + P re s
7 .He IC L .N ro D - .L C d d s
9 .G B D 3 P a d re
1 1.L C a dd et
5 .M I C
USB: JUSB1, JUSB2
7 .US B
3 .M S
5 .U CC 1 .LP C a es k
1 9 LP C R loc
.
n 3 .V 7 .LP C C
io 1
5 .L P C
ct
TPM: JTPM1
C 3 .LP
te O
e B d 1
D S un +
e .U o D
o
n 0 r B D-
n 1 .G
h io 8 US B
P d
d ct # . S
6 .U C n
u nd
a e E
e Pin et C 4 VC ro u n r e
r
.H D EN .
0 o 2 .G ro Pi we Q r ow
1 .N IC S 4
8 .M RE nd 1 2 . G o P o IR w e y p
1 0.N V ial o b
6 .P ou
4 Gr 1 .5 r P nd
. 8 Se 3V ta
.
2 6 3. S
.
4 .3V
2
: JCI1
BIOS
2 .C
.G IN
1
ro T
u RU
n
d
CMOS: JBAT1
BIOSCMOS
CMOSOS
JBAT1
1 1 1
CMOS
CMOS2-3()
1-2CMOS
148
MS-7592
PCIE
PCIEPCIE
PCI
PCI
BIOS
PCI
CPUPC
()PCIIRQ
:
1 2 3 4
149
BIOS
POST (Power On Self Test)
<DEL>
<DEL>
<RESET><Ctrl><Alt><Delete>
150
MS-7592
Cell Menu ()
/
M-Flash
USBBIOS(FAT/FAT32
)
Load Fail-Safe Defaults (BIOS)
151
CPU Technology Support (CPU)
<Enter>CPU
Intel EIST
SpeedStep(EIST)/Speed
StepCPU
CPU Speed
Step(EIST)CPU
Adjust CPU FSB Frequency (MHz) (CPU FSB)
CPU FSB
Adjust CPU Ratio (CPU)
CPU
Adjusted CPU Frequency (MHz) (CPU)
CPU (FSB x )
MEMORY-Z
<Enter>
DIMM1/2 Memory SPD Information (DIMM1/2SPD)
<Enter>
Advance DRAM Configuration (DRAM)
<Enter>
DRAM Timing Mode (DRAM)
DRAMDRAMSPD (Serial Presence De-
tect) EEPROM[Auto By
SPD]SPD
[Manual]
CAS Latency (CL)
[DRAM Timing Mode][Manual]
SDRAM
CAS
tRCD
[DRAM Timing Mode][Manual]
RAS()CAS()
DRAM
tRP
[DRAM Timing Mode][Manual]
DRAM
RAS
DRAMDRAM
DRAM
152
MS-7592
tRAS
[DRAM Timing Mode][Manual]
RAS()
tRTP
[DRAM Timing Mode][Manual]
tRFC
[DRAM Timing Mode][Manual]
RAS()
TRASTRP
tWR
[DRAM Timing Mode][Manual]
tWR
tRRD
[DRAM Timing Mode][Manual]
tWTR
[DRAM Timing Mod][Manual]
FSB/DRAM Ratio (FSB/DRAM)
FSB
Spread Spectrum
(EMI)
[Disabled]
[Disabled]
153
*
[Disabled]
[Enabled]
* Spread Spectrum
* [Disabled]
154
<>
(Pb) (Hg) (Cd) (Cr6+) (PBB) (PBDE)
(Battery)
/
(Cable/ Connector)
/ (Chassis/ Other)
(CD, DVD)
(Optical Disk Driver)
(Hard Disk Driver)
(PCAs)*
(I/O Device)
(Mouse, Keyboard)
(LCD Panel)
(Memory)
(Processor and Heatsink)
(CDDVD)
(Power Supply)
(Remote Control)
(Speakers)
(TV Tunner)
(Web Camera)
(Wireless Cards)
. *(PCB)IC
2.
3. :SJ/T11363-2006
4. :SJ/T11363-2006
EU RoHS
5. <>
EPUP (Environmental Protection Use Period)
6. EPUP-(SJ/Z
11388-2009)EPUP,