Professional Documents
Culture Documents
Baseline Switch 2226-SFP Plus - v1.0.1.16 - RN PDF
Baseline Switch 2226-SFP Plus - v1.0.1.16 - RN PDF
1. Introduction
1.1 Scope
These release notes summarize the operational requirements and known issues for the
following 3Com Baseline Switch 2226-SFP Plus software release.
To obtain the latest technical information for your Switch, including a list of known
problems and solutions, visit the 3Com Knowledgebase:
http://knowledgebase.3Com.com
2. Upgrade Procedure
On rare occasions, the first upgrade to v01.00.01.16 may not be successful. If this has
happened, the switch will not start up correctly after the reboot following the first
firmware upgrade cycle. If this is the case, you should power cycle the switch and repeat
the upgrade procedure after which the new code should have loaded successfully. Once
this has been done the problem will not re-appear.
3Com Baseline Switch 2226-SFP Plus (3C16475CS) v01.00.01.16 Release Notes
Page 2 of 3
4.7 IGMP
The issue where the IGMP querier sends a tagged frame when a port joins which is set
as untagged has been resolved in this release.
5. Upgrading Software
For instructions on how to upgrade the Switch to this firmware version, please refer to
the 3Com Baseline Switch 2226-SFP Plus User Guide (part number 10015240-BA).
3Com Baseline Switch 2226-SFP Plus (3C16475CS) v01.00.01.16 Release Notes
Page 3 of 3
6. Additional Information
6.1 Backing up Configuration Files
Please note that it is recommended that you back up your configuration before
upgrading your switch.