Dich 235:2181105 J REWRITING OF FIRMWARE > 1, Rewting of frmvare
J REWRITING OF FIRMWARE
1. Rewriting of firmware
414 Outline
‘Tho following types of fmware can bo rower To rewrite far, MFP and PC must be connected using the USB cable an tho update
rust be slarted rom PC. Depending onthe cominaton of boards, the required types of frmar is dierent.
Main FH, NIC FW, PCL FW
cee to a
TFS coor an
HEF ba TST Soar FO FH NEAT
Ter ba PL ba ar FF POCA
iPad roe rar RY
Ter baa “PANS ST Fa Fv an PA NEAT
TEP bas FAK Sas PUN BO Far VF) PEL
praca rT
benb ssPz 004 000m
4.2. Preparation
NOTE
‘+ Before rewriting the firmware, install the Printer drivers (GDUPCL Driver onthe host computer used forthe firmware rewrite
‘Before rewriting the firmware, copy the femware rewriting tool, “UpdatoFW.exs "and “UpdateF Win” fo the host computor used
forthe firmware rewrite,
+ When rewriting multiple types of firmware, you can rewrite them Ina desied order
4.3. Rewriting method
1. Connect the machine and PC using the USB cable
2. Copy the firmware wring tool ane reurng program in any abirary recor of the PC.
5. Double-click "Updater W exe"
Ussterese
Chick Browse] and select File path, XXX in
Chk Update
ma
ie
6. Firmware rrting stat
7. Check the spay for statu of th fare rowrting sequence
NOTE,
* De not turn ofthe copler while its firmware is being rewritten,Dich 235:2181105 J REWRITING OF FIRMWARE > 1. Rewting of frmvare
FIRMWARE UPDATE
PLEASE WAITING
‘CHECK SUM
+
FIRMWARE UPDATE
PLEASE WAITING
UPDATE MIC EnW/}§ 1]
¥
FIRMWARE UPDATE
PROGRAM TRANSFER,
i.
+ The area shown as [1 neat te type of mae
|. When th flowing message appears inthe dsplay indcates that ewriing af the femware has been completes
FIRMWARE UPDATE
FIRMWARE UPOATE OK
MACHINE POWER OFFION
9, When [Transfer Successfull] message appears on tho screen click [OK to cose the execution too
fee)
“rene Sona!
10. Turn OFF and ON the power switch of the machine, and confi the firmware version.
LB7 MAIN FW VER. L468 ENGINE FAV VER, [4.6.9 PCL FIW VER. |. 8.10 NIC FAW VER,
14, Torewite multiple ype a amare, repeat steps 31010
Tz4J REWRITING OF FIRMWARE > 2, Prosadure when upgradin
beh 2352151105
2, Procedure when upgrading the firmware has failed
+ Perform the procedure scribed bolw if normal Frmware update fas MFP doos not tar propery aftr update, oi you rewrite BIOS
Fu.
1. While pressing the Function key andthe [Uy] Key onthe conto pana the same time on MFP, tum the power ON,
2. Choc to make sue tha 8108 MODE] i displayed onthe conta pan,
BIOS MODE + BIOS MODE +
WAIT FIRMWARE UPDATE [emp] XXX/KX/XX Vo.XX
Connect the machine and PC using the USB cable,
Copy the frmware rowing 00 'UpdateFW.exe",UpdateF Wn" and rewriting program in any arbivary dectory ofthe PC.
Double-click "Updater W exe"
Utter
pac
Chek Browse] and select File path, A000K bir
Chek (Update
1, Firmware retin stat,
2. Check te display for stalus of the fare ewring sequence.
NOTE,
* Do not turn ofthe copler while its firmware is being rewritten
FIRMWARE UPDATE
PLEASE WAITING
‘CHECK SUM
+
FIRMWARE UPDATE
PLEASE WAITING
FIRMWARE UPDATE
PROGRAM TRANSFER,
i.
+ The area shown a 1 inca the type of mae
10. When the falling message appears inthe display. indicates that rewrtng ofthe femware has been completed
Te4J REWRITING OF FIRMWARE > 2, Prosadure when upgradin
beh 2352151105
FIRMWARE UPDATE
FIRMWARE UPDATE OK
MACHINE POWER OFFION
11, When [Transfer Successfull] message appears ont
sereen click [OK to cose the execution tool
Pee)
“rene Sona!
12, Turn OFF and ON the power switch of the machine, and confi the firmware version.
LAB7 MAIN FW VER, L468 ENGINE F”W VER,
TF