Professional Documents
Culture Documents
Uniten Course Outlines Memd221 s2 1718
Uniten Course Outlines Memd221 s2 1718
Course Code
:
MEMD221
Course Status
:
Core
Level
:
Diploma
Semester Taught
:
4
Credit
:
1
Assessments
:
Pre Lab
10%
Experimental data sheet
10%
Lab report
60%
Instructor Evaluation
15%
Peer Review
5%
Lecturers
:
Muhammad Hanif Abdul Karim
Course Description
:
This
course
provides the
analytical material covered in
Course Objectives
:
1) To
define
and explain
the principles related to the
experiment involving Tensile Test, Torsion Test, Bending Test, Buckling Test, Hardness Test,
Thin Cylinder, Impact Test and Microstructure Analysis
Perform and obtain raw data for experiments involving Tensile Test, Torsion Test, Bending Test,
Buckling Test, Hardness Test, Thin Cylinder, Impact Test and Microstructure Analysis following
the manual.
Calculate the raw data and analyse in graph form where applicable. Discuss and conclude the
results obtained. Search and identify references related to the experiments. Produce
1/6
Diploma in Mechanical Engineering
No.
Upon completion of this course, the student should be able to:
Define and explain the principles related to the experiment involving Tensile Test,
CO1
Torsion Test, Bending Test, Buckling Test, Hardness Test, Thin Cylinder, Impact
Perform and obtain raw data for experiments involving Tensile Test, Torsion Test,
CO2
Bending Test, Buckling Test, Hardness Test, Thin Cylinder, Impact Test and
Calculate the raw data and analyse in graph form where applicable. Discuss and
CO3
conclude the results obtained. Search and identify references related to the
CO5
Adhere to laboratory ethics and practices
2/6
Diploma in Mechanical Engi eering
Diploma ofMechanical Eng ineering
College ofFoundation and General Studies
College ofFoundation and General Studies
Course Outcomes:
Course
PO1
PO2
PO13
PO4
PO5
PO6
PO7
PO8
PO9
PO10
PO11
Outcomes
CO1
X
CO2
CO3
X
CO4
CO5
Assessments
CO1
CO2
CO3
CO4
CO5
Pre Lab
X
Lab report consists of 1 group formal report and 7 lab sheet reports
Peer Review
Instructor Evaluation
PO emphasis:
PO1
PO2
PO3
PO4
PO5
PO6
PO7
PO8
PO9
PO10
PO11
Total
0.0
15.0
60.0
5.0
0.0
0.0
100
Bloom's Coverage (%):
Cognitive
Psychomotor
Affective
Total
Low
Med
Hi
Current Coverage (%)
10.0
0.0
0.0
70.0
20.0
100
3/6
Diploma in Mechanical Engineering
Course Outline/Syllabus:
Main Reference :
Laboratory Manual
Additional Reference(s) :
Foundations of Materials Science and Engineering, by William F. Smith and J. Hashemi, 5th Edition in SI Unit,
McGraw Hill, 2011.
Mechanics of Materials, by F. P. Beer, E. R. Johnston, J. T. DeWolf & D.F. Mazurek, 5th Edition (SI Units),
McGraw Hill, 2009
4/5
Diploma in Mechanical Engineering
Course Schedule
Week
Subject
Assessment
Remarks
Introduction to Mechanics of
Briefing
Materials Lab
Pre Lab
Experimental Data Sheet
Tensile Test
Lab Report
Practical
Peer Review
Instructor Evaluation
Pre Lab
Torsion Test
Lab Report
Practical
Peer Review
Instructor Evaluation
Pre Lab
Bending Test
Lab Report
Practical
Peer Review
Instructor Evaluation
Pre Lab
Buckling Test
Lab Report
Practical
Peer Review
Instructor Evaluation
Pre Lab
Hardness Test
Lab Report
Practical
Peer Review
Instructor Evaluation
Pre Lab
Thin Cylinder
Lab Report
Practical
Peer Review
Instructor Evaluation
Pre Lab
8
Impact Test
Lab Report
Practical
Peer Review
Instructor Evaluation
Semester Break
Pre Lab
10
Microstructure Analysis
Lab Report
Practical
Peer Review
Instructor Evaluation
5/5