Number 152 In FIG P4.23 change the roller support at B to a hinged support, as shown on the attached copy of the page. 660 Figure 16.5 (i), change 180.37 to 108.37 669 Figure 16.8: correct figure is below: Page Correction Description Number 677 Figure 16.12 parts (c) and (d) values are corrected below: Page Correction Description Number 692 Figure 16.17 (c) values are corrected below: Page Correction Description Number 693 Figure 16.17 (d) and (e) correct figures are below:
694 Figure 16.17 (f) change
150 kN to 120 kN 79.1 kN to 51.21 kN 53.09 kN to 34.36 kN (both instances) 131.54 kN m to 85.1 kN m 70.9 kN to 68.79 kN
731 Figure 17.11 (a): change 500 kN to 250 kN
Page Correction Description Number 773 Change middle of page as indicated: