Fluiten uses the best technology and materials to
develop new product's lines, in accordance with
regulations for the protection and health of
workers in plants with high risk of explosion,
toxicity and flammability.
The mechanical seals’ models on the following
pages meet the most stringent regulations of the oil
& gas, chemical and petrochemical:
= API 682 latest edition
~ Atex 94/9/EC (Regulation of equipment intended for use
in areas at risk of explosion)
~ PED (Directive 97/23/EC for pressure equipment)
= IPPC (integrated Pollution Prevention and 96/61/EC).
European
Sealing
Association @.V.MECHANICAL SEALS FOR PLANT'S SECURITY
o1
Single seals allow for a containment's level of emi
Suitable for limited heavy duty applications in terms,
of emissions of pollutants. The emissions come from the liquid film that is established between the seal faces
to get adequate lubrication, the liquid can vaporize to the heating effect between the faces accelerating the
dispersion. Fluiten has developed systems of single mechanical seals, Atex certified, for those uses in which
the process fluid is at risk of fire, but there are no high environmental risks.
Limit conditions CB8S*
SPEED PRESSURE TEMPERATURE DIAMETER
3 2 16 ito
t t + t
o o 40 20
"rent canons canbe died eur cel Depa
sre ndested speed and prevelant soe is hey
Trust be cles th et of Vand coreg te empertre
‘the pcan chemical chorea ther a
‘The mechanical seal CB8S, single with double
hydraulic balancing and multiple springs
external to the process fluid, is provided with
flange, shaft sleeve and fixed compass auxiliary
cartridge in preparation and in accordance with
the requirements of API 682. Available models.
2S and C35 for ISO standard pumps.
Limit conditions BM6S*
SPEED PRESSURE TEMPERATURE DIAMETER
3 2 yeas 0
t t t t
0 0 40 20
‘anctons an be defined fom our ena Depart:
spd a posure vce wena tes hey
‘de phyla chemical cherie of the proces fui.
‘The mechanical seal BM6S, single with multiple
springs external to the process fluid and flotting
safety bush, is provided with flange, shaft sleeve
and cartridge configuration in accordance with
the requirements of API 682.
Pures ane could ingle lent om the standard crhguration tere arts The pad may charge fr tecnica cone neseFluiten has a metrology laboratory equipped with the latest generation of laser
instruments to measure all the components in a very short time. This method minimizes
the possibility of unexpected non-compliance during assembly, testing and commissioning
phases of mechanical seals. Fluiten also has an after-sales department that meets the
growing need for rapid maintenance, repair and modification of the seals. Fluiten offers a
global service that provides 360 ° continuous service and technical support to customers.
FLUITEN’S STAFF, THE COMMERCIAL OFFICE AND TECHNI-
CIANS ARE AVAILABLE TO ASSIST YOU WHEREVER YOU ARE
Fluiten Italia S. p. A. -Via Leonardo da Vinci, 14- 20016 Pero (Mi) - Tel. +39.02.33.94.03.1 - www.fluitenit - e-mail info@fluiten it