Professional Documents
Culture Documents
DSE8610 Data Sheet PDF
DSE8610 Data Sheet PDF
DSEGenset
TEMPERATURE
BS EN 60068
The DSE8610 is an easy to use The event log will record 250 events KEY LOAD SHARE FEATURES: Ab/Ae Cold Test -30oC
Synchronising Auto Start Control to facilitate easy maintenance. An • Peak lopping/sharing (with BS EN 60068-2-2
Bb/Be Dry Heat +70oC
Module suitable for use in a extensive number of fixed and DSExx60)
multi-generator loadshare system, flexible monitoring, metering and • Sequential set start VIBRATION
designed to synchronise up to 32 protection features are included • Manual voltage/frequency BS EN 60068-2-6
Ten sweeps in each of three major axes
generators including electronic and as well as comprehensive adjustment 5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
non-electronic engines. communication and system • R.O.C.O.F. and vector shift
expansion options. protection HUMIDITY
BS EN 60068-2-30
The DSE8610 monitors the • Generator load demand Db Damp Heat Cyclic 20/55oC @ 95% RH
generator and indicates operational Using the DSE PC Configuration • Automatic hours run balancing 48 Hours
status and fault conditions, Suite Software allows easy • Mains (Utility) de-coupling BS EN 60068-2-78
Cab Damp Heat Static 40oC @ 93% RH
automatically starting or stopping alteration of the operational • Mains (Utility) de-coupling 48 Hours
the engine on load demand or fault sequences, timers and alarms. With test mode
SHOCK
condition. all communication ports capable of • Dead bus sensing BS EN 60068-2-27
being active at the same time, the • Bus failure detection Three shocks in each of three major axes
System alarms are annunciated on DSE8610 is ideal for a wide variety • Direct governor and AVR control 15gn in 11mS
the LCD screen (multiple language of demanding load share • Volts and frequency matching DEGREES OF PROTECTION
options available), illuminated LED applications. • kW and kV Ar load sharing PROVIDED BY ENCLOSURES
BS EN 60529
and audible sounder. • Dead bus synchronising IP65 - Front of module when installed into the
control panel with the supplied sealing gasket.
DSENET ®
RS232 AND USB USB CONFIGURABLE DC OUTPUTS ANALOGUE EMERGENCY DC POWER
EXPANSION RS485 PORT HOST INPUTS SENDERS STOP SUPPLY 8-35V
+
ETHERNET
DEUTZ
DSE8610 MSC
ISUZU
PERKINS
CATERPILLAR
MTU
7 55xx 75xx 8xxx VOLVO
OTHER
CUMMINS
SCANIA
BUS VOLT FREE GENERATOR SENSING FUEL & START CHARGE ELECTRONIC MAGNETIC
SENSING OUTPUTS OUTPUTS ALTERNATOR ENGINES PICK-UP
CURRENT VOLTS
D+
+ W/L
ISSUE 3
®
DSEGenset
DSE8610 SPECIFICATION
CRANKING DROPOUTS
FEATURES Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout
and supply recovers to 5 V. This is achieved
without the need for internal batteries
OUTPUTS
OUTPUT A (FUEL)
15 A DC at supply voltage
OUTPUT B (START)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250 V AC (Volt free)
• Independent earth fault protection alarms expansion capability via DSENet® OFFSET VOLTAGE
• Advanced integral PLC editor • Multiple date and time run • Licence-free PC software +/- 10 V DC
Fully isolated
• 11 Configurable inputs scheduler • IP65 rating (with supplied gasket)
• 8 Configurable outputs • Manual fuel pump control offers increased resistance to water BUILT-IN AVR CONTROL
• Configurable flexible sensor inputs • Fuel usage monitor and low fuel ingress MINIMUM LOAD IMPEDANCE
1000Ω
• DSENet® expansion compatibility level protection • Advanced Internal PLC editor allows Fully isolated
• User configurable RS232, RS485 • Charge alternator failure user configurable functions to meet
GAIN VOLTAGE
and Ethernet communications protection specific application requirements. 0 V to 10 V DC
• Remote SCADA monitoring via • Load switching (load shedding Fully isolated
various DSE software applications and dummy load control) EXPANSION DEVICES
• DSE124 CAN/MSC Extender OFFSET VOLTAGE
• MODBUS RTU & TCP support • Configurable event log (250) +/- 10 V DC
• User configurable MODBUS • Backed up real time clock • DSE2130 Input Expansion Module Fully isolated
• DSE2131 Ratio-metric Input Expansion
pages
Module DIMENSIONS
• Advanced SMS control and fault • DSE2133 RTD & Thermo-couple OVERALL
messaging (additional GSM Expansion Module 240 mm x 181 mm x 42 mm
9.4” x 6.8” x 1.6”
modem required) • DSE2152 Ratio-metric Output
• Easy access diagnostic pages Expansion Module PANEL CUTOUT
including modem diagnostic pages • DSE2157 Output Expansion Module 220 mm x 160 mm
8.7” x 6.3”
• Data logging and trending • DSE2548 LED Expansion Module
MAXIMUM PANEL THICKNESS
8 mm
RELATED MATERIALS 0.3”
TITLE PART NO’S OPERATING TEMPERATURE RANGE
DSE8610 Installation Instructions 053-069 -30 oC to +70 oC
DSE8610 Operator Manual 057-115
DSE8600 PC Configuration Suite Manual 057-119 STORAGE TEMPERATURE RANGE
DSE8660 Date Sheet 055-086 -40 oC to +85 oC