Professional Documents
Culture Documents
Implementation
Solution for SRB over
HSDPA Activation
Contents
1 Description of Change....................................................................................................... 4
1 Description of Change
The target sites of activating feature WRFD-010652 SRB over HSDPA are HSDPA
enabled site.
The current SRB is setup on DCH while HSDPA service is setup, the transmit power
F-DPCH binding with SRB over HSDPA can make full use of the downlink codes
and power due to replacing many DPCHs. As a result, it make more codes and
power available for HSDPA to improve the downlink capacity. (eg., if A-DPCH using
code SF=256, F-DPCH can be shared by 10 UEs, which means max 9 SF=256
codes and power resource can be saved). Moreover, the SRB over HSDPA is
there are risks that PS call drop rate will increase. The following switches will be set
The following parameters and switches strongly related to feature performance, which will
CMP_UU_FDPC CMP_UU_FDPC
Compatibility Switch CmpSwitch H_COMPAT_S H_COMPAT_S
WITCH-0 WITCH-0
PS_RL_SETUP_ PS_RL_SETUP_
Optimization Switch Optimization Switch
SWITCH-1 SWITCH-1
IUR_RL_REEST IUR_RL_REEST
Process Control Switch 4 PROCESSSWITCH4
_SWITCH-1 _SWITCH-1
TRB_RESET_R TRB_RESET_R
Process Control Switch 4 PROCESSSWITCH4 L_REEST_SWI L_REEST_SWI
TCH-1 TCH-1
SRB_RESET_R SRB_RESET_R
Optimization Switch OptimizationSwitch L_SETUP_SWI L_SETUP_SWI
TCH-1 TCH-1
RLFAIL_RL_SE RLFAIL_RL_SE
Optimization Switch OptimizationSwitch
TUP_SWITCH-1 TUP_SWITCH-1
RL_RESTORE_ RL_RESTORE_
Optimization Switch OptimizationSwitch
SWITCH-1 SWITCH-1
PHY_RECFG_R PHY_RECFG_R
Process Control Switch 4 PROCESSSWITCH4 EEST_SWITCH- EEST_SWITCH-
1 1
PHYCHRECFG PHYCHRECFG
Process Control Switch 4 PROCESSSWITCH4 _ENH_RL_REE _ENH_RL_REE
ST_SWITCH-1 ST_SWITCH-0
RB_SETUP_EN RB_SETUP_EN
Process Control Switch 4 PROCESSSWITCH4 HANCE_RL_RE HANCE_RL_RE
EST_SWITCH-1 EST_SWITCH-1
RBRECFG_EN RBRECFG_EN
Process Control Switch 4 PROCESSSWITCH4 H_RL_REEST_ H_RL_REEST_
SWITCH-1 SWITCH-1
IRATHO_HOC IRATHO_HOC
Process Control Switch 4 PROCESSSWITCH4 ANCEL_RL_RE ANCEL_RL_RE
EST_SWITCH-1 EST_SWITCH-0
technical expert
It is required to check the health of the trial RNC and NodeB before feature
activation.
activation.
(High/Middle/ (High/Middle
Low) /Low)
To our best knowledge, the following terminals are not compatible with SRB over HSDPA.
It is required to block these terminals to use SRB over HSDPA. The following table lists
Description TAC
7 MotorolaXT890 35253105
te
measures
maintenance personnel
instruments
System Verification
Person
3 Check the Check the path for transmitting Fan Bai 23:30
team
Configuration file
Operation Log
Performance Data
CHR, PCHR
System Verification
Person
2 Feature Run roll back scripts to turn Off Fan Bai 4:30
N/A
N/A
N/A