Professional Documents
Culture Documents
AVK series 54 gate valve is a tough and sturdy metal seated design well suited for use in applications where conditions are
harsh with high temperatures and high content of debris or other abrasives. The metal seals are machined to a supremely fine
surface finish that makes sure to close water tight under all conditions.
Product description:
Metal seated gate valves for drinking water and neutral liquids to max. 70°C.
Standards:
· Designed according to EN 1074 part 1 & 2
· Face to face according to EN 558 Table 2 Basic Series 3
· Standard flange drilling to EN1092-2 (ISO 7005-2), PN 10/16
Test/Approvals:
· Seat: 1.1 x PN. Body: 1.5 x PN.
Features:
· Metal seat design able to withstand high temperatures and abrasive media
· Face rings machined to a fine surface finish to ensure a tight seal
· Self-lubricating bronze wedge nut
· Full circle thrust collar provides fixation of the stem and a low operating torque
· Through bore housing for the stem in the wedge to prevent stagnant water and impurities
· EPDM O-cord body-bonnet gasket fixed in a recess to prevent blow-out
· Full bore
· Lifting eyes for easy handling
· Prepared for by-pass retrofit
· 250 µm epoxy coating on all internal iron parts; all other parts are either copper alloy or stainless steel
Accessories:
Handwheel, gearbox, actuator, by-pass, inspection cover, floor pillar
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.
Component list:
1 13
1. Body Ductile iron GJS-500-7 (GGG-50) 13. Bolt Steel, hot dip galvanized
2 14
3. Face ring Alu-bronze CC331G (AB1) 15. Bolt Steel, hot dip galvanized
4 16
4. Wedge Ductile iron GJS-500-7 (GGG-50) 16. Stem cap Ductile iron GJS-500-7 (GGG-50)
5 17
6. Stem Stainless steel 1.4057 18. Gland flange Ductile iron GJS-500-7 (GGG-50)
7 19
8. Bonnet Ductile iron GJS-500-7 (GGG-50) 20. Washer Steel, hot dip galvanized
9 21
10. Thrust collar Alu-bronze CC331G (AB1) 22. Blind plate Ductile iron GJS-500-7 (GGG-50)
11 23
Components may be substituted with equivalent or higher class materials without prior notification.
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.