gg CSIMAIN) EXAM, 2010
“Sl. No. Petes
ELECTRICAL ENGINEERING
Paper II
[Time Allowed : Three Hours| [Maximum Marks + 300]
INSTRUCTIONS
Each question is printed both in Hindi and in
English. :
Answers must be written in the medium
specified in the Admission Certificate issued
to you, which must be stated clearly on the
‘cover of the answer-book in the space
provided for the purpose. No marks will be
given for the answers written in a medium
other than that specified in the Admission
Certificate.
Candidates should attempt Question Nos. 1
and § which are compulsory, and any three
of the remaining questions selecting at least
one question from each Section.
Assume suitable data if considered necessary
and indicate the same clearly. :
Symbols/notations carry usual meaning,
unless otherwise indicated.
Ail questions carry equal marks. . .
Marks assigned to each part of the question
are indicated at the end: of the respective
part.
emaz: argent ar fet Sore Rr meT-7r & fod ge
ome!Section ‘A’
1. (a) Why is a LVDT excited by high frequency
and low voltage ? Derive the LVDT output,
€o in terms of excitation voltage. winding
resistance and inductances. A bridge ABCD
has resistors in its four arms. R, in arm AB,
7 oN. R, in arm BC, dummy gauge in arm AD,
and active gauge in arm CD. If a strain
of 1250 um/m is applied, find the bridge
offset voltage across: AC if the bridge is
supplied with a voltage of 12 V across BD.
Assume, Ry = Ry =Rgummy gauge = 350 ohm
and R, = 350 ohm has gauge
‘aclive strain gauge
factor (GF = 2-0). 2410+8=20
. (b) (i) Explain the functions of static VAR
. systems in EHV AC transmission.
Gi) Discuss different types of static VAR
systems (SVS) with the aid .of neat
figures. . 84+12=20
(c) Write an 8085 assembly level program for
designing the following system :
When a coin is inserted and when it is valid,
port 1 gives code FFH. If it is valid, check
whether the request is for tea or coffee at
C-DTN-K-FFB 2 (Contd.). wave ‘a
. 1. (at) feet wa at St At at oer onahe oer freratecat
eat satra fear sar & ? oer at St St & Fate
" atezat eg HY era, wal weer Aiecat, Healt
gfetrer aar axaca A, Afi wwe aq aBcD
a at art % vfates ame ag z1
R, FT ABH, RPT BCH, apt AD FH:
aia wari, war ast CD # we afea gard i
afe 1250 um/m Ft fafa ofa Ht ag 8, AC
a wer atecar ara frfiu, afe Aq at BD
meq deat 12 V dffa Ht ag 8) we athe
R,=Ry= Rear gant) = 350 ST war
Revie frp gar = 3500 ait eT ATT TORR
(37 GH = 2-0) 2+10+8520
@) @ fw twit ea F Ae tt aK &
arf at ere Fifirg |
Gi) eee Ret ) wer @ fafirs gar &
a g a dat (aa at wa) ff oer
ATRre 1 8+12=20
(@) frafafaa az dt aftteerar & fa 8085
PST Fat aT Tiga ferfae :
wa Up facet (ales) fafaee fore are & aat
an ag de Ste @, aH 1, Hie TH TH Ua Ba
21 a ag ae 8, aa ares 2 1 ae Re fi
C-DTN-K-FFB 3 : (Contd.)2.
{a)
(b)
port 2. 04H code at port 2 is the request for
tea and 40H code at port 2 is the request for
coffee. Open the valve for liquid to come out
with 04H code for tea and 40H code for
coffee at port 3. These codes at port 3°are to be
used for valve operation. When port 4 gives
code OOH, valve is to be closed with code
FFH. Repeat process can start with a new coin.
If coin is invalid, 00 indication at port 5 is to
be given and the instruction for inserting a new
coin can be given. .
Write comments in the selected lines of the
program. 20
The loop Transfer function of a system is
given by
4
GOH) = 5 is :
528 +45 +85+8)
Find the number of roots located on the
imaginary axis and also their values using the.
Routh table.
Is there any root on the right hand side of the
s-plane ? : 5+10+5=20
G) Differentiate between “Restriking Pheno-
menon” and “Reclosing Phenomenon” in
a circuit breaker. Which one is harmful
and which one is useful and why ?
C-DTN-K-FFB 4 (Contd.)fader arr ar atht & ferg @ 1 ares 2 9 O4H
ape ara && fervent & fora 8 aear ara 2 40H
ars arét & faa & fers 81 aw 3 9 04H
vals & fer ated @ ara aa & faa aia aa
40H ate 3 ferg ahr & fore atfera | grea 3 ae
at BST a area Gare & fre gah fear sat
@1 Wa aH 4 He OOH Far @ area aT az BY
area afeg ae FFH &1 ay fae & faq
qroadt gaa ode St aepet @ | afe fare ater
@, Ta aH 5 3 00 Bot St ar arfer gar aT
fer & fratert 3 fore Freer fear or awe FI
Stare ft sare cred # fest of ferfere | 20
2. (38) was cea ar faeafireer ae sireor-coara Rear 2:
Ts+4
3°(s3 +457 + 8s+8)
aria wat oc aaferd yet A deat are
Aferg car cae afer ar gitar aed BU wa
are aft strat ftir t
saat & afta aed az sar ate yor 2 ?
, 5+10+5=20
(a) @ afore faites 7’ ge: watt gear’” war
“qadfert gear” % Se sere i ait at
etree @ car aia at araeras & era
aay ?
G(s)H(s) =
C-DTN-K-FFB 5 (Contd.)Ai
. Gi)
«) Gi)
C-DTN-K-FFB
A simple power system is -shown
operating on NO LOAD.
cB
closed
open
circuit
A fault occurs at the far end of the
system and the breaker contacts separate.
Derive an expression for the voltage
across the breaker contacts. Find the
frequency of oscillation of the recovery
voltage. What is the highest value of the
Restriking Voltage and when does it
oceur. . 6+14=20
A two bus system is shown in the figure
below :
Poy Po,
ees <2
® @
Load
If 100 MW power is transferred from
plant | to load, a loss of 12 MW is
incurred. System incremental cost is
= Rs. 30/MWh. The’ incremental costs
of the two plants are given by :
6 (Contd.)Gi) apa ais ae waters aA are Oe ae afte
wa at fearar wat 2 |
SAAT AMT FAT STAT aE Ha Ta B ?
. - 6+14=20
(a) @ 48 Rua far 8 at ae ad ds at Rar
ware:
Re Fox
: Oo, con
afé 100 mw aft dia 1 a ote at
earaiatice ht sia aet 12 Mw at arf ete
leer Sy arfties ot A = 8. 30/MWh BI
ail saat ft arftfas ore Sr ag E :
C-DTN-K-FFB a7 (Contd.)Gi)
% @ @
ii)
aii)
(iv)
nO)
tii)
C-DTN-K-FFB
acy
1 = 0-02 Pg, +16-0 Rs. .
ae, Gy MWh,
50-04 Fe, +20-0 Rs /MWh.
Po,
Determine Pa» Pay and power received
by load.
Derive the economic dispatch criterion
for a power system consisting of thermal
plants with transmission losses. 12+8=20
Explain the ‘principle of the argument’
of the complex-variable theory.
Explain how this is adopted to determine
the stability of control systems.
The critical point in using the Nyquist
criterion is (~1, 70) in G(s)H(s) plane and
not the origin (Q, j0). Why ?
For minimum phase transfer function,
G(s)H(s), the’ polar plot is sufficient to
determine the stability of the system.
Explain. 5454+5+5=20
Explain comparatively steady state,
dynamic and transient stability of a
power system.
Explain point-by-point method of solving
swing-equation stating clearly the"
assumptions made. 8+12=20
s (Contd.)AE. = 0.02 Fe, £16-0 &.mWh.
aPs,
4, 9, 20.
dP, = 0-04 Po, +20-0 &/MWh.
Po, TU Pg, RY are Airy ae sits set
gre aft Wi acre | :
Gi), ata aaa, Braet aaron erat ett &, &
fore frereactt Boor atta egret fare |
12+8=20
3. (@) @ wea fagia & “orac. fra” *
aareat Aree |
di) eee