Professional Documents
Culture Documents
1. Download file from internet. Use files only from checked sources.
2. Unzip file to USB device. File format on USB must be .bin file.
3. Connect USB to PC, wait for USB initialization
4. Press USB file on remote
5. Find your file with new software, press ok on it
6. Receiver will pop-up message: do you really want to change
software? You must choose YES, receiver will perform software
upgrade
7. After finishing software upgrade, receiver will reboot with new
software
User Channels database will be not changed after upgrade. You can
upgrade it by USB in the same way as software upgrade.
automatically:
1. go to MENU/Expansion IP setting
2. press red button to receive address by DHCP
3. press green button to test connection to ethernet
4. go to Confirm position, press OK on it.
manually:
1. go to MENU/Expansion IP setting
2. write proper IP address manually
3. press green button to test connection to ethernet
4. go to Confirm position, press OK on it.
2. after initialization ok, on receiver you will see messave: USB Wifi
ready.
from now Wifi menu will be automatically displayed in MENU/EXpansions/
Wireless setting
WARNING! after installing USB Wifi, Ethernet connection by LAN cable will
not be possible.
Ethernet Cable connection will be switched off.
in receiver:
by PC.
1. run program server_tool_X405_X406_8M.exe
2. input your server parameters, press SAVE, save your .bin file with
server settings.
3. load .bin file with server settings to USB.
4. connect USB to receiver,
5. press USB button on remote, choose your .bin file with server
settings, press OK, confirm.
6. receiver will load the file and reboot. after reboot, receiver will
have new server settings in
MENU/Expansion/Server.
WARNING!!! All previous server settings will be erased.
This enable to share one card between many X405 or X406, and also other
receivers which support NEWCAMD protocol..
To set-up server:
1. Load software 1.07.4815 or newer.
2. Put card in card reader slot.
3. Use special sw., press F1+111, enable internet
4. Go to Menu/ Expansion/ IP setting to set IP address. Recommended to
set IP manually, it will avoid address change after your router
restart. Remember your server IP.
Warning! When using more X405 X406 in one LAN network, you might
need to change MAC address. It is possible that all receivers will
have the same MAC address, and it will cause conflict. It is
important. Change MAC address by simply clicking on it. First 4
digits are not editable, rest of digits are editable.
5. Also in IP setting menu, there is position INTERNAL PORT. Remember
this value.
6. In MENU/ Settings/ System Settings change option DEEP STANDBY to
OFF. Then if you don’t watch tv on your server and turn it off,
receiver will stir work for your clients.
7. In MENU/Timer turn off option AUTO POWER DOWN. Your server will not
turn off automatically after 3 hours.
8. Go to menu EXTRAS/ Homeshare/, you have following options:
TCP port – it is newcamd port, you need to put it in clent.
Server type – now it is Newcs, not need to change
Auto Start – choose YES, then server will automatically start after
every reboot.
Confirm – to start server press “OK” on this position. Server will
start running in background. To stop it, press OK again on this
field.
After some customers will connect to the server, you will see IP
address of user and connection time.
To set-up client:
9. Use special sw., press F1+111, enable internet
1. Go to Menu/ Expansion/ IP setting to set IP address. Press GREEN
button to test link, to check if your connection is working.
Warning! When using more X405 X406 in one LAN network, you might
need to change MAC address. It is possible that all receivers will
have the same MAC address, and it will cause conflict. It is
important. Change MAC address by simply clicking on it. First 4
digits are not editable, rest of digits are editable.
2. Go to Menu/Expansion/Server
3. Choose SERVER TYPE: NewCS
4. On position IP/URL write your server IP address
5. On position TCP port write your server INTERNAL PORT number
6. On position DES key, write: 0102030405060708091011121314
7. On position User name, write:3
8. On position Password, write:3 ( you can connect many clients with
the same username:3 and password:3, receiver not verify it)
You need to input special password, separate from receiver parental lock
password, it is 6579.
General description:
EMM U - after setting to NO, all EMMs DEDICATED FOR THIS CARD will be
blocked (USER)
EMM S - after setting to NO, all EMMs destined to the GROUP of cards that
the card in use belongs to.
EMM G - after setting to NO, all EMM to all cards will be blocked.