Professional Documents
Culture Documents
Move A Pressco Sensor
Move A Pressco Sensor
1. first with a wrench we remove all the nuts in the machine, with great caution the pressco
camera is removed.
2. then all the wires are removed from the computer that drives these pressco cameras and placed
in a box.
3. Afterwards, the computer that drives the pressco camera is removed and placed on a platform
with the camera, in order to be taken to the machine where they will be placed.4
5. already in the place where they will be installed, with the help of the manual of the pressco
cameras we can see how the wiring goes, and in this same way also place the computer fixing it to
the floor with some nuts.
6. Once everything is installed in the production line, it checks the good functioning of the
installation