“SS eaaaea
Se Ratio of large duct
J sie so. smallertadk
Distance Vane extends / // ea
into smailee duct falar
from edae of | 2526 v%
Dure dyne Rail
Duro Dyne Flexible Duct
SS tranufactureain thowusia
TOMO N00 100
DURO DYNE EAST CORP.
Bay Shore, NY 11706
DURO DYNE MIDWEST
Fairfield, OH 45011.
DURO DYNE WEST
Santa Fe Springs, CA 90670
DURO DYNE INTERNATIONAL
Bay Shore, NY 11706PRE-ASSEMBLED
FLEXIBLE DUCT CONNECTOR
ELIMINATES DUCT SYSTEM NOISES AND VIBRATIONS
All air duct installations for heating, cooling or
ventilation are attached to mechanical equipment
containing a fan or blower. Vibrations, noises and
rattles resulting from the operation of the fan or
blower are transmitted into the metal ducts which
carry the noises throughout the system.
In order to isolate the vibration and noises to the
source, an air-tight flexible joint, consisting of a fab-
ric which is secured to sheet metal on both sides,
must be inserted between the equipment and the
ductwork. This flexible jointis called a "Flexible Duct
Connector."
To meet every type of installation requirement,
whether it be for factory, institution, office or home;
Duro Dyne offers the widest variety of flexible duct
connector fabrics (U.L. Classified) and sizes; pre-
assembled with the sheet metal permanently
GRIP Loc™
The double-lock gripping fingers of metal-to-fabrics
add tremendously to the holding power compared
to the conventional singlefold method. Grip Lo
standard on Metal-Fab and Super Metal-Fab.
secured to the fabric by means of exclusive seam
locks. Duro Dyne Flexible Duct Connectors are dis-
pensed from the carton, ready to complete fabrication
faster, more efficiently, and more economically than
any conventional method.
oo
CONVENTIONAL
Seousno 00
GUARD Loc™
Another Duro Dyne exclusive. - Shielded with metal
on both sides at the seam, Guard Loc forms a tough
metal-to-fabric bond. Forming in a brake is simpler,
and Guard Loc prevents tears in the fabric because
GRIP Loc. Nanay? ORDINARY of unique metal-shielded seams. Guard Loc is
ioe standard in Econ-0-Fab, Junior and Insulflex
Connector.
DUCT FABRICS Cre ca Length [J Neoprene Width Length
(For SPECIFICATIONS ploase refer | #10044 DGL6 too ft.| [#10043 DFN-6 | 6"_| 100 Ft.
to FABRICS on page 3). #40052 DGL-40 ir 400 ft | [#10051 DFN-40 | 40" [100 ft.
Exar Coens (caecum eal
#10161 DBx.6 | 6" _|100ft.| | #10042 0FD-6 | 6” | 100ft.| [#10045 DFT-6 | 6" [100 ft
#10162 DBx410 | 40" [100 %t.| [#10050 DFD40| 10" [soon | [#10053 DFT40| 10" [100 ft.
ric C
100 ft. = 30.48 m
Canvas, other fabrics & sizes
Bee eon
Page 2PT C7 a
TEM DESCRIPTION SPECIFICATIONS (Metric) FEATURES.
#10301 MEVA-100 Color: Black/White Weight: 18 oz/sq. yd. “Environmentally reen*
Bave Fabric: Polyester | (640 isa. meter) Connector
e202 eK Coating: Vinyl Tensile Strength: 200 Ibs. x 190 Ibs. | -Minimum 10% recycled
#10800 MEVaxan (989 N x245N) content
Tear Strength: 60 Ibs. x 80 tbs. | -UV reflective (white side)
(267 Nx 356 N) “Unaffected by mildew
Low Temp: 40°F (-80°e)
High Temp (Continuous): 200°
(93°C)
CYO ieee
TEM DESCRIPTION SPECIFICATIONS (Metric) FEATURES,
#10816 MYL4-100 Colors White Weight: 24 02/69. yd. “Low Gost Substitute for
LprosrTmcioo | Base Fabric: Polyester | (814 gisq. meter) Hypaton
ec Coating: Proprietary Alloy _| Tensile Strength: 280 lbs. x 235 ibs. | -Specifically formulated for
710815 MYLAxax-100 (2245 N x 1045 8) ‘outdoor use.
Tear Strength 100 Ibs, x 100 tbs, | Excellent weather and
(485 N x 445 N) ozone resistance
Low Temp: 40°F (-a0°e) Unaffected by mildew
High Tomp (Continuous): 260°F
(a26-c)
TEM DESCRIPTION ‘SPECIFICATIONS (Metric) FEATURES
#10004 MGL Metatfab Color: Grey & Black Weight: 12 02/84. yd “Good, low cost
[ooze urea saver arotaran”] Bate Fabric: Woven Fiberglass | (407 gisq. meter) “Resistant to acids &
30018 Se ee meta tae) Coating: Vinyl Tensile Strength: 90 Ibs, x 90 Ibs. | chemical fumes
#10036 EGIL Esonofab “Resistant to grease &
pmecons ee Eeoners? _| tbs. x9 tbe. | alkalies
#10029 161 Junior (G5Nx 40) Unaffected by mildew
Low Temp: 40°F (-40°0)
High Temp (Continuous): 180°F
(20)
[3 (rR) meee
TEM DESCRIPTION ‘SPECIFICATIONS (Metric) FEATURES
#10159 MBX Metaifab* Color: *Black or ‘Weight: Commercial Grade - 22 oz/6q. yd. | Excellent water
“Spec Chek Orange | (746 g/sq. meter) resistance
——————— Base Fabric: Woven | Residential Grade - 17 oz/sa. yd. “Excellent tear strength
‘#10160 MBGX Super Metalfab" | Nylon/Polyester Blond | (576 g/sa. meter
#10265 MSPEX Super Metalfabe | Costin
“Excellent all purpose
nyt Tensile Strength: 240 Ibs. x 220 tbs. | fabric
(1067 Nx 978 N) ‘Unaffected by mildew
(#10174 EBX Econofab® Tear Strength: 100 Ibs. x 100 Ibs.
= (445 N x 445 N)
eee Low Temp: -40°F (-40°C)
#10210 MBXTDGITDF 4x4x4" High Temp (Continuous): 180°F (82°C)
#10264 MSPXTDC/TDF 4x4x4"
“#10214 MBXTDO/IDF 4x6x4"
sa aC tel 2) meee ee ere
TEM DESCRIPTION. ‘SPECIFICATIONS (Metric) FEATURES
#10105 MIN Metalfab Color: Black Weight: 22 oz/sa. yd. “Extremely resistant to alkalies
[710148 MLEN Super Motarran 7] Ba8e Fabric: Woven | (746 g/sq. me & gasoline
S10148 MSN Super Metalfab | Fiberglass Tensile Strength: 500 ths. x 500 Ibs.| «Excellent on systems exposed
#10035 EFN Econofab Goating: Neoprene | (2224x2224 N) to toxic fumes,
aa Tear Strength: 13 Ibs. x13 tbs. | -Good general purpose fabric
nn (58 Nx58N) “Unaffected by mildew
Low Temp: -40°F (-40°0)
High Temp (Continuous): 200°
(930)
Page 3FABRICS (CONTINUED)
aCe late el 7)
TEM ‘DESCRIPTION
‘SPECIFICATIONS (Metric) FEATURES,
#10003 MN Metalfab (Color: Black
Base Fabric: Woven
‘#10012 MFON Super Metaifab | Pree gar
‘#10244 MFN TOC/TDF 4x4x4_| Coating: Neoprene
#10246 MFN TDC/IDF 4x6x4
DUROLO!
TEM
Weight: 30 oz/eq. yd. “Extremely resistant to alkalies,
(2017 g/sq. meter) & gasoline
Tensile Strength: 500 Ibs. x 500 Ibs.| -Excellent on systems exposed
(2224.N x 2224 N) to toxic fumes
Tear Strength: 13 lbs. x13 Ibe. | -Good general purpose fabric
(68Nx58N) “Unaffected by mildew
Low Temp: -40°F (-40°C)
High Temp (Continuous): 200°
(930)
Nyt
‘SPECIFICATIONS (Metric)
er
FEATURES
#10002 MFD Metalfab
‘#10014 MF6D Super Metalfab
Fiberglass
#10034 EFD Econofab Coating: Hypalon
#10027 IRD Junior
#10237 MFD TDC/IDF 4x4x4
#10245 MFD TDC/TDF 4x6x4
Bult
“Excellent ozone resistance
*Exeellent resistance to weather-
ing
+ Best overall acid resistance
*Recommended for rooftop
applications
“Unaffected by mildow
Weight: 24 oz./sq. yd.
(814 gieq, meter)
Tensile Strength: 250 Ibs. x 275 Ibs.
(4320 N x 1223 N)
Tear Strength: 13 Ibs. x 13 Ibs.
(68 Nx58N)
Low Temp: -40°F (-40°C)
High Temp (Continuous): 250°F
(a2)
| eed
TEM DESCRIPTION
G05 WET Metalfab | olor: Grey
#10013 MFET Super Metta | a2 Fai: Woven
#40087 EFT Econofab | Coating icon Rubber
#10030 JRT Junior
Ce ee Cee)
‘SPECIFICATIONS (Metric) FEATURES,
Weight: 17 oz/sq. yd. “Excellent high temp. resistance
(576 gsq. meter) Excellent low temp. resistance
Tensile Strength: 200 Ibs. x 250 ibe, | Excellent chemical resistance
(989 Nx 1120 N) Extremely low smoke emission
Tear Strength: 50 Ibs. x 40 Ibe. | -Excellent ozone resistance
(222N x 178 N) -Exoollont resistance to weathering
Low Temp: -65°F (-54°0) Unaffected by mildew
High Temp (Continuous): 500%
(260°C)
ee ete eer eee er
en eto eh ons
Page 4