Professional Documents
Culture Documents
Catalog 2008
S Q U I B B T A Y L O R
Flow Indicator
ISO 9001:2000 REGISTERED
Application
Flow Indicator
Indicates direction of flow of compatible liquids in pipelines at working pressures up to 500 psig [34 Bar]. The indi-
cator must be installed in pipeline tees.
4” Dial
Model Numbers
Pipe Size Includes Item Number Part Number
2” 5305 Adapter - 2” NPT 5520-2 130050
2 1/2” 5305 Adapter - 2” NPT 5520 - 2 1/2” * 130055
3” 5305 Adapter - 2” NPT 5520-3** 130060
*Requires a 2 1/2” x 2” Reducing Bushing **Requires a 3” x 2” Reducing Bushing
Part Numbers
Item Number Part Number
5520R Dial 130046
5520-2” Flapper Only 130065
5520-2 1/2” Flapper Only 130070
5520-3” Flapper Only 130075
1/1/09
10480 Shady Trail #106 • Dallas, TX 75220 • (214) 357-4591 • FAX (214) 357-5923
Website www.squibbtaylor.com • E-mail squibb@squibbtaylor.com
S Q U I B B T A Y L O R Master Visible Liquid-Level Gauges
ISO 9001:2000 REGISTERED
Application
03/20/08
See reverse side for dimensional data, materials of construction, performance, and advice on how to order.
www.squibbtaylor.com
Master Visible Liquid-Level Gauges
Alnico Magnet
2 9⁄16” [65]
From Tank Flange max.
A B C D
4.75” [120] 4.75” [120]
4.75” [120] 4.75” [120]
2” NPT
2.5” NPT
2.32” 2.32” 3” 1.93” [49]
[59] [59] 2.32” [59] [76]
03/20/08
S Q U I B B T A Y L O R 10480 Shady Trail #106 • Dallas, TX 75220 • (214) 357-4591 • FAX (214) 357-5923
Website www.squibbtaylor.com • E-mail squibb@squibbtaylor.com
S Q U I B B T A Y L O R Taylor RoadMaster Liquid-Level
Gauges
ISO 9001:2000 REGISTERED
Application
Liquid-Level Gauges
RoadMaster
The RM Series Road Master gauges were designed to withstand the vibration and shock inherent
in mobile service. Their service life in over-the-road and off-road transports, carrying liquids ranging
from LP-gas to crude oil, is unsurpassed. These gauges allow a continuous reading between 5% and
95% of tank contents.
The RM Series Road Master gauges are designed for working pressures ranging from atmospheric to 450
[31 Bar] psig.
03/20/08
See reverse side for dimensional data, materials of construction, performance, and advice on how to order.
www.squibbtaylor.com
Taylor RoadMaster Liquid-Level Gauges
5 1⁄4” [133]
Diameter
A B 4.75” [120]
C
4.75” [120] 4.75” [120]
2 1⁄2” NPT
3.5” 3.5”
[89] [89]
1.12”
[28]
Mates
Part # Type Material Thread Dimensions
With
5331 2 1⁄2” NPT Reference dwg. A
Forged
5330 RM Series Welding 1
⁄2”-13UNC-2B Reference dwg. B
Steel
5334 3” NPT Reference dwg. C
03/20/08
S Q U I B B T A Y L O R 10480 Shady Trail #106 • Dallas, TX 75220 • (214) 357-4591 • FAX (214) 357-5923
Website www.squibbtaylor.com • E-mail squibb@squibbtaylor.com
S Q U I B B T A Y L O R Magnetic Liquid-Level
Gauges For NH With 3
3
NH or LPG service.
3
Taylor‘s rugged gear drive is standard with shrouded stainless steel beveled gears especially designed
to shed and work out any loose particles which might affect action. From the hermetically-sealed dial
to the one-piece head, body and fusion welded float, each gauge is especially suitable for additive
application and will provide long trouble-free service in even the most severe use. Mounting may
be accomplished in all desired positions where circumstances permit.
03/20/08
See reverse side for dimensional data, materials of construction, performance, and advice on how to order.
Magnetic Liquid-Level Gauges
For NH With Chemical Additives
3
03/20/08
S Q U I B B T A Y L O R 10480 Shady Trail #106 • Dallas, TX 75220 • (214) 357-4591 • FAX (214) 357-5923
Website www.squibbtaylor.com • E-mail squibb@squibbtaylor.com
Magnetic Liquid-Level
Gauges For Anhydrous
S Q U I B B T A Y L O R
Senior Models
These Senior gauges are supplied as standard with a Neoprene gasket and 4 zinc-plated steel head
screws (5⁄16” - 24 x 7⁄8”) for attachment to a flange with a 2 1⁄2” bolt circle.
Senior Junior
Description Description
Models Models
AA For top mounting BA For top mounting
03/20/08
See reverse side for dimensional data, materials of construction, performance, and advice on how to order.
www.squibbtaylor.com
Magnetic Liquid-Level Gauges
For Anhydrous Ammonia Service
03/20/08
S Q U I B B T A Y L O R 10480 Shady Trail #106 • Dallas, TX 75220 • (214) 357-4591 • FAX (214) 357-5923
Website www.squibbtaylor.com • E-mail squibb@squibbtaylor.com
S Q U I B B T A Y L O R
The Eliminator™
Rotogauge Replacement
ISO 9001:2000 REGISTERED For LP Gas & NH Service 3
8. If you end up with the dial chamber upside down, you Stationary 72.1” Thru 84”
cannot solve the problem by rotating the bracket. You P6293-T8400 [1829] - [2134]
must rotate the entire gauge 180°.
†
Any Eliminator installed in a mobile tank greater than 60” is excluded from the
Taylor Gauge Limited Warranty and cannot be reworked.
03/20/08
See reverse side for dimensional data, materials of construction, performance, and advice on how to order.
www.squibbtaylor.com
The Eliminator™ Rotogauge Replacement for LP Gas &
NH Service
3
Adapter 0022-05276
1” NPT
15° 75°
15° 75°
03/20/08
S Q U I B B T A Y L O R 10480 Shady Trail #106 • Dallas, TX 75220 • (214) 357-4591 • FAX (214) 357-5923
Website www.squibbtaylor.com • E-mail squibb@squibbtaylor.com
S Q U I B B T A Y L O R
1” Magnetic Liquid-Level
Gauges For LP Gas Service
ISO 9001:2000 REGISTERED
Application
Taylor’s Hall Effect Module is designed to snap-fit into the recess in the Remote Ready Dial lens.
Once installed, the module can provide ratiometric voltage output proportional to the liquid volume
inside the tank.
Model Selection Chart
Head
Model Mounting Dial Type
Material
03/20/08
See reverse side for dimensional data, materials of construction, performance, and advice on how to order.
www.squibbtaylor.com
1” Magnetic Liquid-Level Gauges
For LP Gas Service
General Specifications* Materials of Construction*
Temperature Range Head
Extremes are -40°F to 158°F, -40C to 70C. Brass forging with optional Zinc head.
Working pressure Centershaft Bearings, Pinion Gear, Cross Stud &
375 psig [25, 8 Bar]. Bearing, Sector Gear
Accuracy Stainless steel.
Dependent on proper sizing of gauge and tank configura- Gear Housing
tion. With direct-reading dials, overall accuracy is ±5%. Hall Acetal.
Effect Module output is within ±4% of indicated reading. Support, Centershaft, & Float Rod
Approvals Tempered aluminum.
Gauge is UL listed for LP Gas service applications. Float
R3D Module is UL Classified as intrinsically safe. Nitrile rubber.
Counterweight
Lead or plated steel.
Magnet
When ordering, specify: Alnico.
1. Specify tank diameter (shown on tank nameplate). Direct Reading Dials
2. Specify the gauge mounting location. Hermetically sealed polycarbonate.
3. State the type of cylinder, horizontal or vertical. R3D Direct Reading Dial
4. Specify the ”H“ dimension. Hermetically sealed polycarbonate.
HA190A
Typical 1” gauge
Dials are attached to head with two screws.
03/20/08
S Q U I B B T A Y L O R 10480 Shady Trail #106 • Dallas, TX 75220 • (214) 357-4591 • FAX (214) 357-5923
Website www.squibbtaylor.com • E-mail squibb@squibbtaylor.com
S Q U I B B T A Y L O R Junior and Senior Liquid-Level Gauges
For LP Gas Service
ISO 9001:2000 REGISTERED
Application
Junior
Description
Models Senior
Description
JA For top mounting Models
JU Universal mounting
03/20/08
See reverse side for dimensional data, materials of construction, performance, and advice on how to order.
www.squibbtaylor.com
Junior Liquid-Level Gauges
For LP Gas Service
03/20/08
S Q U I B B T A Y L O R 10480 Shady Trail #106 • Dallas, TX 75220 • (214) 357-4591 • FAX (214) 357-5923
Website www.squibbtaylor.com • E-mail squibb@squibbtaylor.com
S Q U I B B T A Y L O R The “One” Gauge™
Adjustable Liquid-Level Gauge
ISO 9001:2000 REGISTERED
Application
Junior™ Bolted
03/20/08
See reverse side for dimensional data, materials of construction, performance, and advice on how to order.
www.squibbtaylor.com
The “One” Gauge™
Adjustable Liquid-Level Gauge
STEP 1: **NOTE: These assembly instructions are for select models, read included instructions
Instructions
Select Float Arm
New Gauge to Old Gauge length to fit Tank
Locknut Gear Housing
Centershaft
"R" Logo
To be Loosened Mark New Gauge Mark or Scribe
as shown Centershaft as shown
STEP 2:
Shaft is now
Recessed
Original mark
Carefully lines up with
Retighten edge of Locknut
STEP 4:
STEP 5:
STEP 6:
STEP 7:
S Q U I B B T A Y L O R
10480 Shady Trail #106 • Dallas, TX 75220 • (214) 357-4591 • FAX (214) 357-5923
Website www.squibbtaylor.com • E-mail squibb@squibbtaylor.com
MASTER Gauge Adapter
S Q U I B B T A Y L O R
Machining Standard
Machining Standard
MASTER Gauge Adapter
BASIC DIMENSIONS OF AMERICAN NATIONAL STANDARD TAPER PIPE THREAD, NPT 1
1 2 3 4 5 6 7 8 9 10 11
2 2 .3 75 1 1 .5 0 .0 8 6 9 6 2 .2 6 9 02 0 .4 36 5 .01 2 .2 9 6 27 0 .7 5 65 8 .70 2 .3 1 6 30
2.5 2 .8 75 8 0 .1 2 5 0 0 2 .7 1 9 53 0 .6 82 5 .46 2 .7 6 2 16 1 .1 3 75 9 .1 0 2 .7 9 0 62
1 12 13 14 15 16 17 18 19 20 21 22 23 24
2 0 .3 2 05 3 .69 0 .2 6 09 3 2 .2 5 2 7 2 0 .3 0 17 3 .47 1 .0 5 82 0 .5 8 26 2 .3 0 5 43 0 .0 6 9 57 0 .0 0 5 43 2 .1 9 95
2 .5 0 .4 5 55 3 .64 0 .2 5 00 2 2 .7 0 3 9 1 0 .4 3 37 3 .47 1 .5 7 12 0 .8 8 75 2 .7 7 5 00 0 .1 0 0 00 0 .0 0 7 81 2 .6 1 95
1. Basic dimensions of the American National Standard Taper Pipe Thread are given in inches to 4 or 5 decimal
places. While this implies a greater degree of precision than is ordinarily attained, these dimensions are the
basis of the gauge dimensions and are so expressed for the purpose of eliminating errors in computations.
2. Also length of thin ring gauge and length from gauging notch to small end of plug gauge.
3. Also pitch diameter at gauging notch (handtight plane).
4. Also length of plug gauge.
5. The length L5 from the end of the pipe determines the plane beyond which the thread form is incomplete
at the crest. The next 2 threads are complete at the root. At this plane, the cone formed by the crests of the
thread intersects the cylinder forming the external surface of the pipe. L5=L2-2p
6. Given as information for use in selecting tap drills.
7. Military Specification MIL-P-7105 gives the wrench makeup as three threads for sizes 3 & smaller.
8. Reference dimension.
8 holes, tap .500-13 UNC-2B x 5/8” min.
full threads
03/05/08
S Q U I B B T A Y L O R 10480 Shady Trail #106 • Dallas, TX 75220 • (214) 357-4591 • FAX (214) 357-5923
Website www.squibbtaylor.com • E-mail squibb@squibbtaylor.com