You are on page 1of 1

In the Figure 2 shown above, the first design of the system shown is the Multi-

Platform Conveyor Belt System. The system consists of a conveyor system, a


dehydrator oven (made up of 4 incandescent lamps, four 80mm fans and a load cell
weighing system), a miller, a sifter, a collection container and a touchscreen
monitor. The pre-peeled, pre-soaked and sliced bananas will be put in the
dehydrated oven. When the load cell indicates desired weight of dehydrated slices,
the conveyor will roll the slices to drop it to the miller to be milled and when
desired fineness of the flour is achieved, it will go through the sifter and be
weighed again in the collection container after the process is done.

You might also like