Professional Documents
Culture Documents
LAB MANUAL
Semester : 2ndSemester
TEXT BOOKS
1. David M. Levine et al, “Statistics for Managers using MS Excel’ (6th Edition) Pearson, 2010
2. David R. Anderson, et al, ‘An Introduction to Management Sciences: Quantitative approaches to Decision
Making, (13th edition) South-Western College Pub, 2011.
3. William J. Stevenson, Ceyhun Ozgur, ‘Introduction to Management Science with Spreadsheet’, Tata
McGraw Hill, 2009.
4. Wayne L. Winston, Microsoft Excel 2010: Data Analysis & Business Modeling, 3rd edition, Microsoft Press,
2011.
5. Vikas Gupta, Comdex Business Accounting with Ms Excel, 2010 and Tally ERP 9.0 Course Kit, Wiley India,
2012
6. Kiran Pandya and Smriti Bulsari, SPSS in simple steps, Dreamtech, 2011.
SPSS
(Statistical Package for Social Studies)
General Experiment
AIM:
PROCEDURE:
Step 1: Go to All programs SPSS SPSS statistics and click to open SPSS main window.
Step 3: It will ask for the destination to store the file. Select the destination folder in the computer and name
the document and click on save to save the statistics document file.
Step 5: Type the Variable Name, Type, Width, Decimal Points required and other required
Step 6: Use the same procedure for creates the required data variables.
Step 7: Go to data view table and type the data on the variable in the sheet.
RESULT:
AIM:
To make Frequencies analysis using SPSS
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
Step 2: Click Analyze to get the sub – menu.
Step 3: Now click Descriptive Statistics Frequencies from the Analyze sub – menu.
Step 4: Select the Variable1 from frequency table and take it to the Variable(s) list box by clicking
button.
Step 5: Keeping all other options unchanged, click OK to execute command.
Step 6: The output will be published in a new window.
RESULT:
Descriptive Statistics (Frequencies) is conducted and the result is identified.
Experiment No. 1b (DESCRIPTIVES)
AIM:
To make Descriptive analysis using SPSS
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
Step 2: Click Analyze Descriptive Statistics Descriptives
Step 3: Holding Shift Key (or) Ctrl Key to select Variable and move them into the Variable(s) list box by
clicking button.
Step 4: Click the Options button to get the dialogue box.
Step 5: Select the desired statistics by clicking the appropriate check boxes. Minimum, Maximum, Mean
and Standard Deviation are selected by default. Here, we shall keep the default selection of statistics.
Step 6: Keeping default value for Display Order click the Continue button to go back to the previous
dialogue box click the OK button to execute the command.
Step 7: Following output shall be displayed in the Output Viewer Window
RESULT:
You see the title Descriptives followed by the Descriptive Statistics table and the result is identified.
Experiment No. 1c (CROSSTABS) [an observation of Cross-tabulation]
AIM:
To make Crosstabs analysis using SPSS
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
Step 2: Click Analyze Descriptive Statistics Crosstabs
Step 3: Select Variable1 and move it to the Rows list box and select Variable2 and move it to the
Columns list box.
Step 4: Click the Cells button to get the dialogue box.
Step 5: This allows you to add additional values to your table. Click the check box to select Observed,
Expected in the Counts frame; and the Row, Column and Total in the Percentage frame.
Step 6: Click the Continue button to go back to the previous dialogue box and then click the OK button
to execute the command.
Step 7: Following output shall be displayed in the Output Viewer Window
RESULT:
The output will display a heading Crosstabs followed by two tables – Case Processing Summary and
Variable1 * Variable2 Cross-tabulation and the result is identified.
Experiment No.2
(HYPOTHESIS – PARAMETRIC)
When sample is less than 30 and population standard deviation is not known, t-distribution is used instead
if standard normal distribution. The dataset for our example of bulb life as claimed by the manufacturer is
shown in the following table: (H0: µ = 3000 & H1: µ ≠ 3000)
AIM:
PROCEDURE:
Step 1: Enter data given in the table above in the data editor and save it as bulblife.sav.
RESULT:
You will see the title t-Test followed by two tables – One Sample Statistics & One Sample Test and the
result is identified.
Experiment No. 2b (Independent Sample t-Test):
AIM:
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
Step 3: Now click Compare Means Independent Sample t–Test from the Analyze sub – menu to get
the dialogue box;
Step 4: Select the Variable and move it in the Test Variable(s) box by clicking button.
Step 5: Click Define Groups assign code 0 to Group1 and 1 to Group 2 and click Continue button
to return to previous dialogue box.
Step 6: Click the Options button to select the Confidence Interval. The dialogue box will appear;
Step 7: Since the chosen value of α is 0.05, we keep the value of Confidence Interval of 95%.
RESULT:
You see the title t-Test followed by two tables – Group Statistics & Independent Sample Test and the
result is identified
Experiment No. 2c (Paired Sample t-Test):
AIM:
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
Step 3: Now click Compare Means Paired Sample t–Test from the Analyze sub – menu to get the
dialogue box;
Step 4: Holding Shift Key (or) Ctrl Key to select two variables and shift them to Paired Variable(s) list box
by clicking button in the centre.
Step 6: Keeping the default value of Confidence Interval Percentage click Continue button to go to
the previous dialogue box and then click OK to execute command.
RESULT:
The output displays three tables – Paired Samples Statistics, Paired Samples Correlations & Paired
Sample Test under the title t-Test and the result is identified.
Experiment No. 2d (One-Way ANOVA):
AIM:
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
Step 3: Now click Compare Means One-Way ANOVA from the Compare Means menu to get the
dialogue box;
Step 4: Select and bring the variable1 to the Dependent List box and Select variable2 and bring it to the
Factor Text box by clicking button in the centre.
Step 6: Select Descriptive, Homogeneity of variance test and Means plot click Continue button to
go to the previous dialogue box and then click OK to execute command.
Step 7: In the output viewer window, table for the descriptives and ANOVA will be displayed
RESULT:
The output displays three tables – Descriptives, Test of Homogeneity of Variances & ANOVA - under
the title One-way, and one graph under the title Means Plot and the result is identified.
Experiment No.3
(HYPOTHESIS – NON-PARAMETRIC)
AIM:
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
Step 3: Now click Non-parametric Legacy Dialogues Runs to get the dialogue box;
Step 4: Select Variable and move it to Test Variable List box by clicking button.
Step 6: Select the desired statistics by clicking the appropriate check boxes Descriptive and Quartiles
Check boxes. Here, we shall keep the default selection of statistics.
Step 7: Click Continue button to go to the previous dialogue box and then click OK to execute
command.
RESULT:
The output displays two tables – Descriptive Statistics and Runs Test are displayed under the heading
NPar Tests and the result is identified.
Experiment No. 3b (Chi – Square Test)
AIM:
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
RESULT:
Three tables – Case Processing Summary and Variable1 * Variable2 Cross-tabulation and Chi-Square
Tests – are generated under the heading Crosstabs on executing the command for Chi-square test and
the result is identified.
Experiment No. 3c (Mann-Whitney U Test)
AIM:
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
Step 3: Click Nonparametric Legacy 2 Independent Samples to get the dialogue box.
Step 4: Select Variable and move it to Test Variable List box by clicking button.
Step 5: Click Define Groups assign code 0 to Group1 and 1 to Group 2 and click Continue button
to return to previous dialogue box.
Step 6: Click Options button to get the dialogue box.
Step 7: Select Descriptive and Quartiles options in Statistics frame by clicking them.
Step 8: Click Continue button to go back to the previous dialogue box and keeping all other options
unchanged.
Step 9: Click OK to execute the command.
Step 10: The output will be appear in output viewer window.
RESULT:
Under the title – Npar Test, a table – Descriptive Statistics are displayed. Just below this table, two more
tables – Ranks and Test Statistics are displayed under the heading Mann-Whitney Test and the result is
identified.
Experiment No. 3d (Wilcoxon Signed Rank Test)
AIM:
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
Step 3: Click Nonparametric Legacy 2 Related Samples to get the dialogue box.
Step 4: Holding Shift Key (or) Ctrl Key to select two variables and shift them to Test Pairs list box by
clicking button in the centre.
RESULT:
Descriptive Statistics table is displayed under the heading Npar Tests and two more tables – Ranks and
Test Statistics are displayed under the heading Wilcoxon Signed Ranks Test and the result is identified.
Experiment No. 3e (Kruskal - Wallis Test)
AIM:
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No. 1
Step 3: Click Nonparametric Legacy K Independent Samples to get the dialogue box.
Step 4: Select the Variable1 and move it in the Test Variable(s) and Variable2 in the Grouping Variable
box by clicking button.
Step 5: Click Define Range type in 1 in Minimum and 3 in Maximum and click Continue button to
return to previous dialogue box.
RESULT:
Descriptive Statistics table is displayed under the heading Npar Tests and two more tables – Ranks and
Test Statistics are displayed under the heading Kruskal-Wallis Test and the result is identified.
Experiment No. 4
(CORRELATION & REGRESSION)
Experiment No. 4a (Correlations)
AIM:
To make correlation analysis using SPSS
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No.1
Step 2: Click Analyze to get the sub – menu
Step 6: To find out Means and standard deviations for each of the selected variables, select appropriate
check boxes in the Statistics frame.
Step 7: Click Continue button to go back to the previous dialogue box and keeping all other options
unchanged.
Step 8: Click OK to execute the command.
Step 9: The output will be appear in output viewer window.
RESULT:
Under the major heading – Correlations, a table titled Correlations is displayed and the result where
identified.
Experiment No. 4b (Regression)
AIM:
To make Multiple Regression analysis using SPSS
PROCEDURE:
Step 1: Open the SPSS datasheet and feed the data as per the instruction given in Experiment No.1
Step 2: Click Analyze to get the sub – menu
RESULT:
Under the title Regression, four tables – Variables Entered and Removed, Model Summary, ANOVA
and Coefficients – will be displayed and the result where identified.
Experiment No. 5
(FORECASTING)
Calculates, or predicts, a future value by using existing values. The predicted value is a y-value for a given
x-value. The known values are existing x-values and y-values, and the new value is predicted by using
linear regression. You can use this function to predict future sales, inventory requirements, or consumer
trends. The dataset for our example of Tata Consultancy Services Profit since March 2009 - 2012 is shown
in the following table;
A B
Known Y Known X
1
Profit (in Rs. Cr.) Time Period (Duration)
2 4696.21 March 2009
3 5618.51 March 2010
4 7569.99 March 2011
5 10975.98 March 2012
Syntax:
FORECAST(x, known_y's, known_x's)
* The FORECAST function syntax has the following arguments:
X Required. The data point for which you want to predict a value.
Known_y's Required. The dependent array or range of data.
Known_x's Required. The independent array or range of data.
AIM:
To describes the formula syntax and usage of the FORECAST function in Microsoft Excel.
PROCEDURE:
Step 1: Click Start All Programs Microsoft Office Microsoft Office Excel Spreadsheet will
appear on your screen.
Step 2: Enter data given in the table above in the spreadsheet.
Step 3: Type the predict value of known x in B6th Cell as “March 2013”
Step 4: Type the FORECAST formula in A6th Cell as “=FORECAST (B6, A2:A5, B2:B5)” press
ENTER.
Step 5: The Predicts a value for y given an x value of March 2013 is shown in A6th Cell.
RESULT:
We get the predict value of known y using forecast analysis for the year March 2013.
Experiment No. 8
(REVENUE MANAGEMENT)
AIM:
Problem
(i) Minimize Z = 2x1 + 3x2
Subject to x1 + x2 ≥ 5
x1 + 2x2 ≥ 6 and x1, x2 ≥ 0
RESULT:
We get the output for Linear Programming.
Experiment No. 9
(TRANSPORTATION & ASSIGNMENT)
Experiment No. 9a (Transportation Problem)
AIM:
To obtain Optimum Transportation cost using TORA
Problem
Distribution Centres
Availability
D1 D2 D3 D4
Origin S1 11 13 17 14 250
S2 16 18 14 10 300
S3 21 24 13 10 400
Requirements 200 225 275 250
PROCEDURE:
Step 1: Select TORA in windows
Step 2: Press any key to continue and select Transportation problem
Step 3: Enter new problem and give title (E.g. Sink)
Step 4: Enter the Source and Destinations count
Step 5: Press Y for yes and N for No for the User defined names
Step 6: Enter the user names for Source and Destination if you pressed Y
Step 7: Type the Supply (3) and Demand (4) values as available in the problem
Step 8: Enter the Source values for different destinations
Step 9: Save the file and press enter, it shows solve and modify menu
Step 10: Select solve Option – Procedure – Automated Procedure and press Enter
Step11: Select view solution/sensitivity summary from the Optimum menu and it displays the optimum
solution summary in the window.
RESULT:
We get the output for Transportation Problem.
Experiment No. 9b (Assignment Problem)
AIM:
To obtain Optimal Assignment using TORA
Problem
Machines
M1 M2 M3 M4
J1 5 7 11 6
JOBS
J2 8 5 9 6
J3 4 7 10 7
J4 10 4 8 3
PROCEDURE:
Step 1: Select TORA in windows
Step 2: Press any key to continue and select Transportation problem
Step 3: Enter new problem and give title (E.g. Machine)
Step 4: Enter the Source and Destinations count
Step 5: Press Y for yes and N for No for the User defined names
Step 6: Enter the user names for Source and Destination if you pressed Y
Step 7: Type the Supply (4) and Demand (4) values as 1
Step 8: Enter the Machine values for different Operators
Step 9: Save the file and press enter, it shows solve and modify menu
Step 10: Select solve Option – Procedure – Automated Procedure and press Enter
Step 11: Select view solution/sensitivity summary from the Optimum menu and it displays the optimum
solution summary in the window.
RESULT:
We get the output for Assignment Problem.
Experiment No. 10
(NETWORKING MODELS)
AIM:
Data
Activity 1-2 1-3 1-5 2-3 2-4 3-4 3-5 3-6 4-6 5-6
Duration 8 7 12 4 10 3 5 10 7 4
PROCEDURE:
Step 2: Press any key to continue and select Network models – Critical path (CPM)
Step 5: Enter the duration at the appropriate nodes – E.g. 1-2 means N1-N2 = 8 and there are no 1-4
activities so N1-N4 = inf
Step 6: Press F8, Save the file and press enter, it shows solve and modify menu
Step 7: Select solve Option – Procedure – Automated Procedure and press Enter
Step 8: Select view solution/sensitivity summary from the Optimum menu and it displays the optimum
solution summary in the window.
RESULT:
We get the output for Networking Models.
Experiment No. 12
(INVENTORY MODELS)
AIM:
Data
A D K H P L Q C1 C2 Sigma Alpha
Inf 2000 3 2 0 1 - - - - -
PROCEDURE:
Step 2: Press any key to continue and select Inventory models – General EOQ
Step 4: Give the quantity discounts and buffer stock calculations if any by pressing Y otherwise press N
Step 5: Enter the Production Rate, Demand Rate, Set Up Cost, Holding Cost, Penalty Cost, Lead
Time, Price Break Quantity, Price Levels etc
Step 6: Press F5, Compute solutions, it shows the value of EOQ, lead time, buffer stock, etc
RESULT:
We get the output for Inventory Models.