Professional Documents
Culture Documents
Flylines
Lines. We’ve all got our opinions. That’s how it should “Lines with as little memory as possible are great. I like
be because they’re just central to any angler’s casting, them to lie flat as pancakes. That’s where Hardy excels.
presentation and control. Fly fishing is about presentation as much as anything else
and a barbed wire line won’t give you a chance.” John Bailey.
“Buy the best line you can afford and then look after it. Dirty,
gritted lines crack. You lose distance, accuracy, control and wear “Match the line to the rod. Too many people don’t understand
rod rings. Don’t stand on your lines either, pushing them into how critical this is. A light rod will be swamped by
the mud and grit. Think how you store them. don’t leave lines a heavy line. A heavy rod won’t even nod to a light one.
damp and festering for long periods. Wash them periodically Line ratings really are there for a purpose.” Chris Ogborne.
in warm water with just a hint of detergent.” Nick Hart.
“Line colour? Visibility is the key when it comes to take
“Buy the line you actually need. Double tapers are great for detection – especially with floating lines. I don’t know about
turning over in tight, close situations. Fish at distance, though, trout seeing certain colours, but I do know it’s vital you see
and you’ll be looking at a weight-forward. Weight-forwards a line move even a paper’s breadth!” Alastair Dandie.
are good across the board still, running and salt. If you’re
It’s a fact. Lines are so important that we’re
doing a lot of salt work, though, it’s worth buying a dedicated
excited to introduce these new ranges we know
saltwater line. You’ll notice the difference. Intermediate
will make your fishing a whole lot better.
lines are useful, too and if you’re serious about stillwaters,
build up a range of different sinkers.” Howard Croston.
40
H a r d y P e r f o r ma n c e F l y Li n e s
M ach T r o u t
M ach T r o u t
to meet the needs of the most demanding single handed anglers. LOOP welded loop connector at Tip
Fourteen lines in the range cover the majority of situations any LIQUID Liquid slick is a Minimum Friction
trout angler will meet during the course of a typical season. SLICK
Technology that greatly improves
The wide variety of floating, intermediate and sinking lines shoot ability and durability
make these the immediate choice for the serious angler.
AFTM
Complies with AFTM
105 feet length Welded tip loop Twin colour COMPLIANT
standards at 30ft
floaters for easier casting and bite detection ‘Liquid slick’
lubrication system AFTM size specific tapers.
WF5 - WF8
WF6 - WF8
WF6 - WF8
WF6 - WF8
41
H a r d y P e r f o r ma n c e F l y Li n e s
M ach Sa l t wa t e r & 5 5
M ach T r o pica l Sa l t wa t e r
The advanced design of these lines helps throw heavy and often bulky flies
into stiff offshore winds and makes accurate, yet subtle presentation to 35 Yards
105ft
spooky flat species possible. The welded, extra-strong tip loop makes for
32m
rapid leader changes. The stiff, durable, saltwater core lets you maintain
control in the hot, humid conditions of a tropical environment. WELDED
Features built in seamless welded
LOOP loop connector at Tip
M ach 5 5
Mach 55 Wet 2 Tip Spey Line WF8 - WF11
Mach 55 Spey lines are designed by salmon anglers to excel in real 2.5-2.75 IPS 10ft Floating Belly and Running Line
life fishing situations, not just on the casting platform. The line
Weld
Mach 55 Floating Spey Line WF8 - WF11 Mach 55 Wet 2 Spey Line WF8 - WF11
Full Floating Mach 55 Floating Running Line Wet 2 Sinking 2.5-2.75 IPS Floating Running Line
Weld
Weld
Tip Front taper Belly Rear taper Running line Tip Front taper Belly Rear taper Running line
Mach 55 Clear Intermediate Tip Spey Line WF8 - WF11 Mach 55 Wet 5 Spey Line WF8 - WF11
1.25-1.75 IPS Clear 10ft Floating Belly and Running Line Wet 5 Sinking 4.25-5.75 IPS Floating Running Line
Weld
Weld
Tip Front taper Belly Rear taper Running line Tip Front taper Belly Rear taper Running line
42
H a r d y P e r f o r ma n c e F l y Li n e s
M ach 6 5
M ach 6 5
As we’ve already stressed, the market is awash with long-belly Spey lines
that excel on the casting platform but fall short when used in real life 40 Yards
120 ft
fishing situations. The 65 foot head design of the Mach 65 bridges the gap 36.5m
between extreme distance and fishing practicality. You will find the 65 is
long enough to generate a large ‘D’ loop during the longest of Spey casts WELDED
Features built in seamless welded
yet short enough to control when you are wading deep. The 65, in short, LOOP loop connector at Tip
is the perfect solution for the all round, big river angler.
LIQUID Liquid slick is a Minimum Friction
SLICK
Technology that greatly improves
Big rivers are the natural home for the 65. The ‘liquid slick’ lubrication
shoot ability and durability
system improves line shoot, repels dirt and lets you fish with control
and accuracy at big distances with big flies. AFTM
Complies to AFTM Spey
SPEYSCALE
scale for 65ft head line
65 foot head length for maximum distance and effective fishing
COMPLIANT
Twin colour design Accurate sink rates and high buoyancy floaters
Welded tip loop for added strength 120 feet overall length AFTM
Spey scale compliant ‘Liquid slick’ lubrication system.
Mach 65 Floating Spey Line WF8 - WF11 Mach 65 Clear Intermediate Spey Line WF8 - WF11
Full Floating Mach 65 Floating Running Line Clear Intermediate Sinking 1.25-1.75 IPS Floating Running Line
Weld
Weld
Tip Front taper Belly Rear taper Running line Tip Front taper Belly Rear taper Running line
Mach 65 Clear Intermediate Tip Spey Line WF8 - WF11 Mach 65 Wet 2 Spey Line WF8 - WF11
1.25-1.75 IPS Clear 10ft Floating Belly and Running Line Wet 2 Sinking 2.5-2.75 IPS Floating Running Line
Weld
Weld
Tip Front taper Belly Rear taper Running line Tip Front taper Belly Rear taper Running line
Mach 65 Wet 2 Tip Spey Line WF8 - WF11 Mach 65 Wet 5 Spey Line WF8 - WF11
2.5-2.75 IPS 10ft Floating Belly and Running Line Wet 5 Sinking 4.25-5.75 IPS Floating Running Line
Weld
Weld
Tip Front taper Belly Rear taper Running line Tip Front taper Belly Rear taper Running line
43
H a r d y P e r f o r ma n c e F l y Li n e s
M a r k s ma n F l y l i n e s
M a r k s ma n F l y l i n e s
braided core to the lines that means line memory is a thing of the past. 2X
Supplied with 2x High quality braided
We recommend the mono core clear sink tips and intermediates. BRAIDED loop connector
LOOP
Tip Front taper Belly R. taper Running line Tip Front taper Belly R. taper Running line
Clear Sinking Tip WF5 - WF8 Wet 2 Sink WF6 - WF8 Dark Green
Clear Sinking Tip WF Wet 2 Sinking 2.5-2.75 IPS
3ft Clear Tip/ Front Taper Belly R. taper Running line Tip Front taper Belly R. taper Running line
Wet 2 Sinking Tip WF6 - WF8 Wet 4 Sink WF6 - WF8 Grey
Wet 2 Sinking Tip WF Wet 4 Sinking 3.75 - 4.25 IPS
6ft Wet 2 Tip / Front Taper Belly R. taper Running line Tip Front taper Belly R. taper Running line
Slow Intermediate WF6 - WF8 Chestnut Wet 6 Sink WF6 - WF8 Black
Slow Intermediate 0.75 IPS Wet 6 Sinking 6 IPS
Tip Front taper Belly R. taper Running line Tip Front taper Belly R. taper Running line
44
H a r d y P e r f o r ma n c e F l y Li n e s
P r e mi u m F l y l i n e s
P r e mi u m F l y l i n e s
This Hardy entry level line totally defies that description. Entry level
it may be but it’s still a magnificent performer. We offer a tight range. 30 Yards
The two floaters come in both weight forward and double taper options. 90ft/27.43m
The intermediate and medium sinkers are built upon a weight forward
1X
profile. This straight forward, no nonesense range will meet virtually Supplied with 1X high quality
BRAIDED braided loop
all fly fishing challenges. LOOP
These lines are durable, long casting and offer easy control. AFTM
Meets AFTM
They have next to no memory and give you the near‑perfect COMPLIANT
tolerance AT 30ft
AFTM compliant
DT Profile Premium
Floating WF2 - WF8 / Intermediate WF5 - WF8 / Medium Sink WF6 - WF8
WF Profile Premium
45
H a r d y P e r f o r ma n c e F l y Li n e s
L e a d e r s a n d Tipp e t s
LE A DERS A ND T I P P ETS
It’s almost impossible to overstress the importance of good Co-Polymer TIPPET MATERIAL
leaders and tippet material. Absolutely everything else in an
Our tippet material is of the same high-grade
angler’s approach can be as near perfect as it is possible to
co‑polymer as the leaders Tippet spools are
make it, but if that tell-tale line attached to the fly lets him
down for any reason, the game is lost. It’s as simple as that. individually colour coded so you instantly recognise the
diameter of the tippet you are seeking The spools
are all designed to slot together into one handy, secure
Knotless, tapered leaders
package. No more fumbling in tackle bags. Valuable
Manufactured using only the very finest co‑polymer time is saved during the course of a competition or at
material. The taper is designed to be stiff in the the critical moment of the rise Available in thirty
butt with the most delicate of forward sections metre or fifty metre spools based on breaking strain
Knotless tapered leaders roll over much more easily
and present your flies so much more delicately than FLUOROCARBON TIPPET MATERIAL
home-made leaders. Perfect for wild fish in clear waters
The absence of knots is of great benefit, especially Hardy has combed the world to find the finest
when fishing the surface or top zones Available in fluorocarbon available The material is perfect for nymph
seven‑foot six-inch, nine-foot and twelve-foot lengths fishing in crystal water for the wiliest of fish because it
is virtually invisible Because it is denser than water,
our fluorocarbon tippet material will sink perfectly,
giving you the ultimate in presentation Fluorocarbon
is very abrasion-resistant, perfect for the big fish angler
in difficult situations Available in twenty-five metre
or thirty metre spools based on breaking strain
47
L e a d e r s a n d t ipp e t s
F l y Li n e Sp e cifica t i o n s
F l y Li n e Sp e cifica t i o n s
F l y l i n e s p e cifica t i o n s
F l y Li n e a n d l e a d e r Sp e cifica t i o n s
F l y Li n e Sp e cifica t i o n s
49
F l y l i n e a n d l e a d e r s p e cifica t i o n s