Professional Documents
Culture Documents
CSP00045 (FEA-Tutorial) Modello Geometrico Mesh PDF
CSP00045 (FEA-Tutorial) Modello Geometrico Mesh PDF
To this end, it worth to check the geometry of the model before adapting any mesh set to the model.
Figure-1
To check the geometry click on; Geometry > Check > Duplicates… and click on Apply. As can be seen from
Figure-2 all duplicated faces are highlighted in yellow. Please notice although there are four faces which
should be shown as duplicated faces, are not highlighted.
Figure-2
To solve this problem it is recommended to use Cut option from Boolean operation. To use this option
click on: Geometry > Boolean Operation > Cut.
Select each individual marked block as Boolean Master and select the main body for Boolean tool.
1
2
Boolean
tool
3
Figure-3
Once again check for duplicated faces from Geometry > Check > Duplicates… and click on Apply.
Modified faces
Figure-4
And now you can proceed with your meshing features.