TABLES FOR THE GENERAL DESIGN AND SPECIFICATIONS OF MATERIALS 2.39
Table 2-3
Applicable ASTM Specifications
for Various Structural Shapes
F,Min. | F, ‘Applicable Shape Series
Yield | Tensile HSS
Steel | ASTM —_| Stress | Stress* | |
Type | Designation | (ksi) | (ksi) | W | M | S | HP | C | MC| L jRect.) 3 | Pipe
xo _| = | oo [A cr
AS3 Gr.B 35 60 |
T 42 58
aes 8 ae [ss
Carbon 46 62
Gc 30 | 62
A501 36 | 88
[eso | 50
sos Gr. 55 55 | 70-100
Gr. 42 42
6.50 | 50
‘AS72| Gr55 | 55
Gr. 60° 60
High | rest | 65
stength || Gctair| 507
tow. | A618 Gril 50
Alloy 50 50"
o | 6
asa |
7% | 70
A992 50-65!
Corrosion acs = £
Resistant A242 46k 67* Ey
High | so | 70! t
strength [as so [70
lowly haa 50. 70 Std
I = Preferred material specication.
C1 = Material specification does not apply.
Win ules a ange Is shown
For shapes over 426 ft, nly te minimum at 58 ks apps.
For shapes with a flange thickness less than or equal to 11 in. onty. To improve weldability a maximum carbon equivalent can be specified
(per ASTM Supplementary Requirement $78). If desired, maximum tensile stress of 90 ksi can be specified (per ASTM Supplementary
Aequrement $79)
i cesied maximum tense stress of 70 ks canbe specified (er ASTM Supplementary Requement 9)
For stapes with flange thickness less than r equal 2. ony.
ASTM BIB can alo be spectig as corosin-esitant soe ASTM A618
Minimum pps fr was nominal 3 hk and under For wal hikes oer in, FAB kl and F,—67 si
H¥ Gesired, maximum yield stess of 65 ksi and maximum yield to-tersile strength ratio of 0.85 can be specified (per ASTM Supplementary
Aequremert $75)
‘A maximum ye-o-tensilestrongt ato of 0.85 and carbon eqivalet formula ar included as mandatory in ASTM A.
For shapes wit a lange thickness grater tan 2 i. ony
For shapes wth a age thickness grater than Tin. and ls than or equal to in. ony
For shapes with a ange thickness less than or equal o 194i. nl
AMERICAN INSTITUTE OF STEEL CONSTRUCTION, INC.