Professional Documents
Culture Documents
Important Aspects To Be Kept in Mind While Preparing Food Safety & Quality Manual
Important Aspects To Be Kept in Mind While Preparing Food Safety & Quality Manual
Quality Manual:
Total layout of the plant in building to be kept including men and material movement
Identifying each machine in plant and preparing inputs to the machine and output
from the machine to be documented
Process flow chart for manufacturing process from raw material inputs to the finished
products and its storage and dispatch to be documented
Ensure that all the requirements of the respective standard is addressed in the
manual. To ensure this it is better to prepare a matrix indicating the requirements on
the one side and compliance documents in the manual can be given
• Document control
• Control of records
• Recruitment of personnel
• Training of personnel
• Internal audits
• Corrective action
• Preventive action
eFresh Portal made an effort to prepare a Food Safety Manual Structure based
on HACCP guidelines, which is generic and the same can be considered as a first
step towards preparation of the Food Safety Manual and incorporating the
requirements as applicable in individual case.
SAMPLE -FOOD SAFETY
MANAGEMENT SYSTEM MANUAL
ISO 22000:2005
Effective from:
TABLE OF CONTENTS
ABBREVIATION EXPANSION
ACCT ACCOUNT
ADMN ADMINISTERATION
AMDT AMMENDMENT
AMT AMOUNT
ANNX ANNEXURE
APPX APPENDIX
ATT ATTACHMENT
BAL BALANCE
C CONSEQUENCES
CP CONTROL POINT
CHEM CHEMICAL
CONTD CONTINUED
DT DATE/ DATED
EFF EFFECTIVE
I/C INCHARGE
HR HUMAN RESOURCE
IDEN IDENTIFICATION
INFRA INFRASTUCTURE
L LIKELIHOOD
MAINT MAINTENANCE
MAX MAXIMUM
MIN MINIMUM
PREP PREPERATION
PROD PRODUCTION
QC QUALITY CONTROL
QTY QUANTITY
R RISK
STD STANDARD
SUPVSR SUPERVISOR
TPT TRANSPORT
VR VOUCHER
WE WORK ENVIRONMENT
WT WEIGHT
YR YEAR
AMENDMENT LIST
Sl. Document Document Date of Clause No. Reason for Change Authorization
No Name Number Amendment
COMPANY PROFILE
• At this hotel, all three meals are served – Breakfast, Lunch and Dinner. Variety of cuisines - South
Indian, North Indian and International with both Vegetarian and Non-Vegetarian options are
prepared at the Kitchen and served in the Cafe. The Kitchen also has a live counter where Pizzas
and Pastas are made to order with options. The Menus are displayed in the restaurant so that
guests get to know the options available for the day.
• At this hotel, we are committed to making constant improvements to the quality and hygiene
standards of the food served to our guests.
DECLARATION
XYZ Hotels brings out this Food Safety Management System Manual as part of the food safety system under
the authority of the Manager. This Manual is the original and authenticated one and the activities detailed
in this Manual are true and correct. This FSMS Manual is in compliance with the international standard, ISO
22000:2005 which it is based on. The criteria outlined in this Manual are mandatory and shall be complied
with by all the facility staff of this hotel.
Any changes or modifications to be incorporated in this manual shall be made only upon authorization by
the MR and the details of the modifications by the food safety team leader will be indicated in the record of
Amendments.
Date:
Signed by: MR
Signature:
DISTRIBUTION LIST
The Controlled copies of the FSMS Manual are distributed to the following holders:
01 Executive Chef
02 Manager QC
03 Manager (F & B)
AMENDMENT LIST
The FSMS system in xyz is applicable to the activities undertaken in the food service establishment at……,
Hyderabad. The scope is as follows:
We have developed an ISO 22000 based Food Safety Management System which assures the safety of meals
prepared at xyz premises .Process control plans developed and operated for all aspects that are applicable
to the safety of foodstuffs are described/ referenced in the appropriate ISO 22000 Food Safety System
documentation.
The Scope of the ISO 22000 System at xyz has been defined as per the position within the food chain, as per
process location and line, and per product and includes all classes of hazards viz. Physical, Chemical &
Biological.
REFERENCES
• Food Safety Management Systems – Requirements for organizations through out the food chain. – ISO
22000 : 2005
• Action-limit value - A value for the product or process parameter under consideration, deduced
from the critical limit value, which indicates that an intervention in the process is required.
• Aspect- An element of the food business operation (products, processes, PRP, services) that can
interact with the food safety.
• Cleaning - Removal of soil, food residue, dirt, grease or other objectionable matter
• Contaminant - Any biological or chemical agent, foreign matter, or other substances not
intentionally added to food which may compromise food safety or suitability
• Control (verb) - To take all necessary actions to ensure and maintain in compliance with criteria
established in the Food Safety Plan.
• Control (noun)- The state wherein correct procedures are being followed and criteria are being
met.
• Control measure- Any action and activity that can be used to prevent or eliminate a food safety
hazard or reduce it to an acceptable level.
• Corrective Action - Any action to be taken when the result of monitoring at the CCP indicate a loss
of control.
• Critical Control Point (CCP) - A step at which it is essential that a specific control measure is
applied to prevent or eliminate a Food Safety Hazard or reduce the risk to an acceptable level.
• Note- This criterion defines the limiting values for the product or process parameters under
consideration for monitoring (see action- limit vales and target value).
• Disinfection - The reduction, by means of chemical agents and/or physical methods, of the number
of micro-organisms in the environment, to a level that does not compromise food safety or
suitability
• Establishment - Any building or area in which food is handled and the surroundings, under the
control of the same management.
• Flow Diagram - A systematic representation of the sequence of steps or operations used in the
preparation, processing, manufacturing, packaging, storage, transportation, distribution, handling
or offering for sale of a particular food item.
• Food business operator- The person or persons responsible for ensuring that the requirements of
the food legislation are met within the food business under his/ their control.
• Food handler - Any person who directly handles packaged or unpackaged food, food equipment
and utensils, or food contact surfaces and is therefore expected to comply with food hygiene
requirements
• Food Hygiene – All conditions and measures necessary to ensure the safety and suitability of food
at all stages of the food chain.
• Food safety - Assurance that food will not cause harm to the consumer when it is prepared and/or
eaten according to its intended use.
• Food suitability - Assurance that food is acceptable for human consumption according to its
intended use.
• HACCP- A system, which identifies, evaluates and controls hazards which are significant for food
safety.
• HACCP audit- A systematic and independent examination to determine whether the HACCP system,
including the HACCP plan and related results, comply with planned arrangements, are implemented
effectively and are suitable for the achievement of its objectives.
Note- Examination of the Hazard Analysis is an essential element of the HACCP audit.
• Food safety Plan- A document prepared in accordance with the principles of HACCP to ensure
control of hazards, which are significant for food safety in the segment of the food chain under
consideration.
• HACCP based food safety system (a HACCP system) - The organizational structure, procedures,
processes and resources needed to execute the HACCP plan and meet its objectives.
• Food Safety Team- Group of individuals (multi- disciplinary) who develop, implement and
maintain a Food Safety Management system.
• Hazard - A biological, chemical or physical agent in or condition of, food with the potential to cause
an adverse health effect.
• Hazard Analysis - The process of collecting and evaluating information on hazards and conditions
leading to their presence to decide which are significant for food safety and therefore is addressed
in the Food safety plan.
• Monitoring - The act of conducting a planned sequence of observations or measurements of control
parameters to assess whether a CCP is under control.
• Pre-Requisite Program (PRP)- Any specified and documented activity or facility implemented in
accordance with the Codex General Principle of food hygiene, good manufacturing practices and
appropriate food legislation, in order to establish basic conditions that are suitable for the
production and handling of safe food at all stages of the food chain.
• Preventive action- Any measure or activity that will be used to prevent, to eliminate or to reduce
the recurrence of causes for existing deviations, defects or any other undesired situation with
respect to food safety.
• Primary production - those steps in the food chain up to and including, for example, harvesting,
• Products, unprocessed- Foodstuffs which have not undergone a treatment, including products
which have been, for example, divided, parted, severed, boned, minced, skinned, ground, cut,
cleaned, trimmed, husked or milled, chilled, frozen or deep frozen.
• Risk- The probability of causing an adverse health effect caused by the occurrence and the severity
of a particular hazard in food when prepared and consumed according to its intended use.
• Target value- The value of the product or process parameter(s) to be monitored, targeted within
action- limit values (the range of acceptable variations) and certainly within critical limit values,
thus securing a safe product.
• Step - A point, procedure, operation or stage in the food chain including raw materials, from
primary production to final consumption.
• Validation - Obtaining evidence (in advance) that the specific and general control measures of the
Food Safety plan are effective.
• Verification - The application of methods, procedures, tests and other evaluation, in addition to
monitoring to determine compliance with the specification laid down in the HACCP Plan and the
effectiveness of the HACCP – based food safety system.
Food Safety Management System Documentation Structure: The documentation structure
consists of different hierarchical levels as follows:
• Miscellaneous documents
4.1.1 The Food Safety Management System (FSMS) documented by XYZ in this Food Safety
Management System Manual is established, implemented, maintained and updated as and
when required and also its effectiveness is continually improved in accordance with the
requirements of ISO 22000:2005.
4.1.2 XYZ has defined the scope of the FSMS as in FSMS Manual – Clause1.0 and has identified the
product categories, processes and production sites where this FSMS is implemented.
4.1.4 XYZ has outsourced some of the processes like external lab services, pest control, water and
other materials and calibration of testing and monitoring devices for machine testing of food
that are identified and are under the control of XYZ.
4.2.1 General
• Documented statements of Food Safety Policy and Food Safety Objectives in this FSMS Manual.
• Procedure for Document control is established for effective control of documents defining the
following controls
- To ensure that changes and the current revision status of documents are identified.
- To ensure that relevant versions of applicable documents are available at points of use.
- To ensure that documents of external origin are identified and their distribution
controlled and
− To prevent the unintended use of obsolete documents, and to apply suitable identification
to them if they are retained for any purpose.
• Records are established and maintained to provide evidence of conformity to requirements and of
the effective operation of the Food Safety Management System. The records are maintained in such
a way that they are legible, readily identifiable and retrievable.
• At XYZ, the Procedure for Control of records has been established with regard to :
- identification
- storage
- protection
- retrieval
- retention time
- disposition
The Management of XYZ demonstrates good commitment to the FSMS development and
implementation and continually improve its effectiveness
• By ensuring that all necessary resources are available to carry out the operations.
• XYZ ensures that the policy & objectives are understood, implemented and maintained at all levels
of the organization. This is done through suitable means like displaying on boards and conducting
meetings, via departmental heads, etc. Employees are advised of the policy & objectives on joining
the company and/or during trainings. Food Safety Policy forms the basis for formulation of Food
Safety/Quality Objectives.
• Food Safety Policy and Food Safety/Quality Objectives are reviewed in Management Review
Meetings once in 6 months to ensure their continuing suitability.
Policy statement:
The Food Safety Team in M/S.XYS Company is committed to serving food to its guests prepared under
hygienic and safe conditions.
• Ensure that only Trained and Skilled staff are inducted into the kitchen
• Reflect Food Safety Standards in relation to safety practices, premises and equipment
standards
• Reinforce consistent food safety practices in the service
• Aim at providing Safe and Hygienic food
• Reduce the risk of potential food-borne illnesses
• Comply with legislative requirements while maintaining a flexible approach to meet the best
practices
• Reflects continual improvement in the Food Safety Standards.
This commitment to Food Safety Policy will be demonstrated by the management conforming to
Food Safety Management System based on ISO 22000:2005 requirements and the following
objectives as mentioned in the table on the next page.
Organization Chart
Managing Director
pervisor
Hygiene
Supervisor
Supervisor Supervisor
Therefore it is very important that the organization first determines the competency
requirement of the personnel, as per the operational requirement and then recruit
the people complying with this requirement.
• The Planning of the Food Safety Management System is carried out in order to meet the
requirements of ISO 22000 standard and Food Safety/Quality Objectives.
• The FSMS Planning of XYZ ensures that the requirements (inputs) are clearly documented to
ultimately meet the acceptance criteria (output).
• The FSMS Planning includes or refers to the Flowchart, Worksheets, Quality Control Plans, Food
Product Specifications/Recipes and Hazard Identification.
• The integrity of the Food Safety Management System is maintained when changes to the Food Safety
Management System are planned and implemented.
• On conducting a hazard analysis and Determination of the Critical Control Points (i.e., meeting the
first two HACCP principles), the HACCP Plan becomes the input for planning activities with focus on
what areas need control and to what level.
• The requirements of the product are analyzed and defined with regard to :
- Human resources: All staff has the appropriate skills for the jobs / tasks
• The Organization Chart included in this manual shows the relationships between the respective
functions.
All staff and managers are responsible for the quality of their own work and for advising
their respective workers of their work responsibilities, when satisfactory operation of the
FSMS is adversely affected. Staff and managers are responsible and have the authority
within their defined areas of control for:
• Further details of responsibilities and authorities for personnel who manage and perform the
work can be found in the relevant job descriptions or related documents.
• In the event of absence, responsibility and authority passes to the next higher level of
management, for subsequent delegation, as appropriate.
Food Safety Team Responsibilities
• Making of the flow charts, their hazard analysis and determination of CCP, conduction of HACCP
Verification and Validation.
• Providing adequate guidance and training to all for carrying out their duties in the raw material
reception, pre-preparation areas, processing areas, raw material stores and all other sections as per
XYZ approved HACCP Plans, procedures, and operating methods.
• Effective implementation and monitoring of cleaning schedule and strict personnel hygiene measures in
the XYZ
• Ensuring the adequacy, completeness, and (scientific) basis of the potential hazards identified and
analysed.
• Ensuring that the aspects considered while determining the significance of hazards are evaluated
using sound scientific and technical knowledge
• Ensuring that the control measures (general or specific) are appropriate and adequate to control the
hazards
• Ensuring that the fluctuations of the control parameters (equivalent to process criteria) within the
defined critical limits will not affect the safety of the product
• Ensuring the appropriateness of the control measures’ monitoring system
• Ensuring the appropriateness of the corrective action systems defined, w.r.t. preventing the release
of unsafe products, and that they provide evidence that the situation can be corrected immediately.
• Ensuring that the Food Safety System is validated first and every time prior to issue.
• Ensuring that all the validated activities are carried out in time and records of the same are
maintained.
• This is in addition to their existing responsibilities.
Executive Chef of M/s.XYZ Company is the nominated FS Team Leader having responsibility and
authority to
• Ensure that processes needed for the Food Safety Management System are established,
implemented, maintained and updated.
• Report to the top management on the performance of the Food Safety Management System
and any need for improvement
• Ensure the promotion of awareness of customer requirements throughout the organization.
• Liaison with external agencies on matters relating to the Food Safety Management System
• First ensure relevant training and education to FST members
• To organize internal food safety audits for FSMS and review corrective action if required,
through follow up audits.
5.6. COMMUNICATION
- Product information.
- Customer feedback, including customer complaints through e-mail or verbal means.
- Customer complaints and feedback are documented and Corrective and Preventive Actions are
taken accordingly.
• All the data required for Legal authorities and External certifying agencies is recorded and
maintained separately.
• XYZ ensures that appropriate communication processes are established within the organization and
that communication takes place regarding the effectiveness of the FSMS through:
- Management Review Meetings, minimum once in six months
- Notices/Mail.
- Circulars
• The preventive actions identified under hazard analysis and the food product deviations with the
related dispositions are made known by communicating at the appropriate levels and functions.
• At XYZ communication takes place with regard to the following to promote effective operation of the
FSMS:
• The food safety team ensures that this information is included in the updating of the FSMS.
• Top management shall ensure that relevant information is included as input to the management
review
• The minutes of the Management Review Meetings are maintained by the MR.
(Refer Minutes of Management Review meetings)
• The minutes of meetings are communicated to the participants of the meeting for taking effective
actions and demonstrating continual improvement
5.7. EMERGENCY PREPAREDNESS AND RESPONSE
Admn.block. Slip or fall may lead to an Injury to human Safety belt, proper ladder,
Sites of high rise accident beings Proper scaffolding
Building
Painting/
Construction /
Civil work
Cleaning of Slip or fall may lead to an Injury to human Safety belt, proper ladder
glasses Accident beings
breakage of glass
• Emergency Preparedness:
- To deal with fire, the whole premises are equipped with fire extinguisher pipelines and
fittings etc... Which are installed at various locations as per the law.
- Majority of the persons in the service centre trained in fire fighting and first aid is displayed
prominently in every department.
- All security guards are trained in fire fighting.
- Adequate number of first aid boxes are installed and maintained in the service centre.
- All inflammable materials are stored in isolated place and labeled accordingly.
- ‘NO SMOKING’ signs are displayed at all important locations
- Intercom facilities are available all over the building for communication with security
department.
- Personal protective are kept near potential area by the concerned Section In charge such as hand
gloves, masks etc.
- List of emergency telephone numbers is available in each department.
• All types of wastages like raw material, packaging material etc is taken by an external agency for disposal of
the same.
• Other waste like cooked leftover food items are taken by an external agency for disposal and records are
maintained.
• For Product recall from customer please refer clause 7.10.3 (handling of potentially unsafe products)of this
manual
5.8.1 General
Top management reviews the organization’s Food Safety Management System at least once in every six
months to ensure its continuing suitability, adequacy and effectiveness. The review includes assessing
opportunities for improvement and the need for changes to the Food Safety Management System,
including the Food Safety Policy and Food Safety Objectives. Records of management review are
maintained.
Manager QC
Manager Purchase & stores
Manager Production
The input to the Management review meeting includes the following information.
Output of the management review contains the decisions and actions related to
• Assurance of food safety
• Improvement of the effectiveness of the Food Safety Management System
• Resource needs
• Revision of organization’s food safety policy and objectives
Management Representative
- To establish, implement and maintain the FSMS as per ISO22000: 2005 Standards.
- To ensure that processes needed for the FSMS are established, implemented and maintained
understanding the current and future needs of the customers / clients
- To report to the top management on the continuing suitability and effectiveness of the FSMS
and the scope for improvement
- To promote awareness of customer requirements throughout the organization
- To plan, schedule and conduct Internal Audits for FSMS
- To select qualified Internal Auditors
- To review the Audit Report and follow-up Corrective Action / Preventive Action Reports
- To initiate modifications of documents based on Corrective action / Preventive Action and to
control all the documents related to the FSMS
- To schedule management review meetings at the defined intervals and record minutes of
management review meetings for subsequent reporting on the performance / improvements
of the FSMS
- To liaison with the external agencies related to the FSMS Implementation and Certification
• The Management Representative convenes the management review meetings after preparation of
the agenda and maintains the minutes of the meeting.
6.0 RESOURCE MANAGEMENT
• Resources (Human resources, Equipment resources and Work environment needs) required for
implementation & maintaining of Food Safety Management System are identified, and determined
by MR for carrying out various activities as per budgeted plan.
• Resources are provided to implement and maintain the Food Safety Management System and
continually improve its effectiveness and enhance customer satisfaction by meeting customer
requirements. Resource requirements are reviewed in Management Review meetings.
6.2.1 General
• XYZ provides competent personnel for performing work affecting product quality. Competency of
the personnel is based on appropriate education, training, skills and experience and is established in
line with the Food Safety and Quality Policy and Plans. All staff working in food areas is adequately
trained in hygiene procedures.
6.2.2 Competence, Awareness and Training
a. Competence of personnel for performing the activities having Quality, Safety and Environment
impacts has been established on the basis of appropriate education, training and or experience.
b. Enhancement of competence is done through training, education and learning involving technical
knowledge and skills, management skills and tools, social skills, knowledge of markets and
customer needs and expectations, relevant statuary and regulatory requirements, internal and
appropriate external standards, and documentation for performing the work as appropriate.
Efforts are made to increase the awareness and involvement of personnel through programs which covers:
e. It is the responsibility of the Department Heads to identify the training needs of their personnel on
the basis of work performance, introduction of new process and technology and recommend them
for training such as external training, seminars, workshops etc. The workers have also been trained
on basic quality concepts, food hygiene and good manufacturing practices and food safety.
f. The food handlers have the necessary knowledge of food handling and preservation principles
and practices to be able to judge potential risks and take the necessary actions by effective
communications to remedy deficiencies.
Topics to be covered Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
CCP related –
identification, critical
limits, monitoring,
corrective action, record
keeping, verification and
validation
Production related –
receiving, issuing, storage,
cooking, steaming, baking,
frying, dispatch, hot/cold
holding, etc
6.3 Infrastructure :
• XYZ determines, provides and maintains the infrastructure needed to achieve conformity to product
requirements.
- Building, workspaces and associated utilities like UPS, generators, air–conditioners, air-
compressors, etc.
- Calibrated process equipment.
- Supporting services like telephones, fax m/c, computers, etc.
- Appropriate design and maintenance of the work area, which has a major effect on food safety.
The maintenance of the equipment complies with the Good Manufacturing Practice (GMP) and
Good Laboratory Practice (GLP)
• Infrastructure is maintained to ensure their suitability. Equipment maintenance is carried out as per
schedule established.
7.1 General
• XYZ Plans and develops the processes needed for Product Realization. Planning of Product
Realization is consistent with the requirements of the other processes of the FSMS. The processes
are clearly defined with the measurement criteria and the interfacing with the other processes.
• The results of HACCP study is taken as input to Process Planning / Food Safety Planning, with the
critical areas and shows the correct directions. The results from Food Safety Planning give an
indication of the typical controls needed within a process. Food Safety Planning is linked to the
HACCP Plan in which the CCP’s were identified.
• In planning, the following problems / risks are considered which can occur during processing :
- Risk of contamination – for raw materials, additives. Work-in-progress, final products
and packaging materials
7.2.1 XYZ has made available a complete and actual description of the pre-requisite program (PRP) of
the organization. The PRPs establish
- The likelihood of introducing food safety hazards to the product through the work environment.
- All classes of hazards (biological, physical and chemical) of the product/process, including cross
contamination between the products.
- The level of food safety hazards in the product and product processing environment.
7.2.2 XYZ has identified the PRP’s as per the organizational needs, appropriate to the type of operational
and product manufacture along the production system. And PRP’s are approved by Food Safety Team in
compliance with PFA too.
• The procedures belonging to the PRP are well established (specified and documented), fully
operational and integrated with the ISO 22000:2005 system, and verified. Their verification is
addressed as a part of the Internal Audits and Verification activities.
• XYZ has decided which food hygiene principles, good manufacturing practices and food legislation
are to be included into its PRP.
7.3.1 General
• The products and the processes, (the procedures belonging to) and the PRP are subjected to hazard
analysis in order to identify potential hazards and to decide which way the hazards (risk) need to be
controlled. This is demonstrated in the Hazard Identification and Risk Analysis of related
products/processes, in the related HACCP/Food Safety Plans, as applicable. All the relavant
information is collected, maintained, updated and documented. Records are available for the same.
• XYZ has assembled a Food Safety Team in order to develop, implement and maintain the ISO 22000
System. The team definition is available in the Food Safety Team document maintained with the
FSTL. The team members have the knowledge, expertise and cover different disciplines available
which are required to develop, implement and maintain a Food Safety Management System covering
the entire scope of their operation. The competency of Food Safety Team Members is available and
maintained with the FSTL, and is reviewed & updated periodically.
• The assignment (including tasks, responsibilities and authorities) are documented for the team
members of the Food Safety Team as a part of the Responsibility and Authority document
maintained with the FSTL.
7.3.3.1 & 7.3.3.2 Raw materials, ingredients and product contact materials & characteristics of end
products
• The quality specifications are defined for raw materials and ingredients. The product description for
various food groups is specified and documented. The description of the safety of the product group
encompasses the food chain, ranging from raw materials used to the distribution of the finished
products. This is further documented through the Flow Diagrams and Hazard Analysis Work Sheets
for the product group respectively
• An extensive specification of the end products ensures a comprehensive assessment of the food
safety procedures. This specification clearly defines the following product characteristics:
• The intended use of the product is identified and documented for the product groups. Since this has
a direct influence on the required product characteristics.
• XYZ has made available a complete and actual description of the operation in the form of flow
diagrams (process steps), which are included in Food Safety Manual for the Flow Diagram, and
layouts (production facilities), which are available with the FST Leader. When applying ISO 22000
to a given operation, consideration is given to steps preceding and following the specified operation,
which is evidenced in the flow diagrams and Hazard Identification & Risk Analysis worksheet. These
descriptions are drawn up and verified by the Food Safety and Validation Teams.
• The Flow Diagrams provide a schematic overview of the operation, and describe all the steps in
sufficient detail to provide the Food Safety Team with adequate information for the ISO 22000. They
take into account all relevant process steps, such as the manufacturing of the product, including
critical points like:
• All facilities which are part of the infrastructure of XYZ, such as the production lines, storage areas
and personnel facilities are depicted in layout plans. In the layout plans, the following items have
been indicated:
• The accuracy and actuality of flow diagrams and layouts are verified by the Food Safety Team for
compliance with the documented situation on a periodic basis (at least annually), in order to
identify and document modifications to the process installation and layout. Verified flow diagrams
and layouts, with changes marked on them if applicable, are maintained with the FSTL. These
periodic verifications are a part of the Internal Audit cum Verification.
7.4.1 General
• XYZ has identified, analysed and evaluated all potential (biological, chemical and physical)
hazards that can have an adverse effect on the safety of the products. Wherever XYZ’s
operations change in a manner that could adversely affect food safety, all relevant steps of
the Hazard Identification and Risk Analysis are updated (as necessary).
7.4.2.1
• XYZ Food Safety Team has identified and registered all potential (biological, chemical and
physical) hazards that can have an adverse effect on the safety of the products. The
identification includes all aspects of the operation within the scope of the ISO 22000 system.
Potential hazards have been documented in the Hazard Analysis Worksheet.
• The operations evaluated include all products, all processes and the pre-requisite program of
the legal owner of the products
7.4.2.2
• FS Team Members shall identify and record all the potential hazards during food
preparation, processing and delivering (biological, chemical and physical) that may have an
adverse effect on the safety and hygiene of the food product.
• FS Team Members shall identify, analyze and evaluate all potential hazards
(biological/microbiological, chemical/ physical) that can have adverse effect on the safety of the
food product.
- The likely occurrence of hazards and severity of their adverse health effects
- The qualitative and/or quantitative evaluation of the presence of hazards,
- Survival or multiplication of microorganisms of concern,
- Production or persistence in foods of toxins, chemicals or physical agents, and
- Conditions leading to the above.
• The hazard analysis process is for identifying hazards, determining the risks and control/ reduction
of the risk is the risk management.
• Hazard analysis serves to identify the potential sources and specific points of contaminants by
analysis of each step in the food manufacturing process. Hazard analysis shall be applied at all
points from incoming material inspection to consumer.
• Hazard Analysis has been conducted by the Food Safety Team based on the Flow Diagrams.
Methodology followed for arriving a hazard is as follows:
- The likely occurrence of the identified hazard, evaluated quantitatively, in terms of Very
High, High, Medium or Low and likelihood of occurrence, as follows:
1. Probability of occurrence
Very High > automatically happen
Determination of significance
SEVERITY
PROBABIL
ITY
• The severity of the hazard’s adverse health effects, evaluated quantitatively, in terms of critical,
major or minor impact severity, as follows:
• The risk rating, in quantitative terms (arrived at by multiplying the probability of occurrence with
the severity of impact), and the classification of the identified hazard into significant or non-
significant category based on the risk-rating factor. A risk rating of 10 or above indicates that the
control measure is required to control the identified hazard.
SEVERITY
MINOR MEDIUM MAJOR CRITICAL
1 2 3 4
PROBABILITY
LOW 5 9 10 12
(unlikely) 2
MEDIUM 7 10 12 15
(occasionally) 3
HIGH 9 12 15 17
(Likely) 4
VERY HIGH 12 15 17 20
(Frequently) 5
• An explanation / justification for the risk rating arrived at, together with the general control
measures in place for that risk.
• A risk level of below 10 is generally considered as permissible and the routine OPRP’s and PRP’s are
sufficient to control the hazard.
• For each step, including all products, all processes and all parts of the PRP, the assessed aspects
have been identified in the Hazard Analysis Worksheet and HACCP Plan. The reasons for deciding
whether or not the assessed aspect is a CCP or an Operational PRP, or a PRP have been documented,
as answers to the control measure assessment matrix.
• In XYZ’s Food Safety System, more than one control measure may be required to control a hazard,
and more than one hazard may be controlled by a control measure.
• The food safety team has conducted an assessment of every step of the process, and has identified
the significant hazards through the use of control measure assessment matrix. The assessment is
based on, amongst other things, the varied expertise within the team, and has utilized external and
internal information (as needed).
• If the rating of the control measure assessment exceeds 10 the process step is considered as a CCP. If
the rating falls between 7– 10 it is considered as an Operational PRP. And the rating below 7 is
considered as PRP.
• On completion of the hazard analysis, the hazards associated with each step of the food production
shall be listed along with any measures to control the hazards. More than one control measure, if
required to control a hazard, shall be identified and documented and more than hazard may be
controlled by a specific control measure.
• The control measures shall be identified through the Pre-requisite Program/Operational Pre-
requisite Programs. Any additional measures shall be identified during the HACCP implementation
to ensure that the required control is achieved to eliminate or reduce the identified hazard / risk.
The reason for deciding a CCP shall be documented.
• The level of risk shall guide the Food Safety team in identifying the level of control.
TRAINING: Training and teaching of the staff responsible for the process about what is to be done in order
to prevent the hazard.
INFORMAL CONTROL: Informal control is monitoring or checks of the process with out formal recording.
FORMAL CONTROL: Formal control is management of the condition of an operation to maintain the
complaisance with documented criteria.
PHYSICAL CONTROL/ MONITORING: Continuous control and monitoring of actual physical process.
• The General Control Measures relate to the control measures as part of the Pre- requisite Program
and operational Pre- requisite Program, to achieve control at acceptable levels.
CONTROL MEASURES
Hazard analysis
Verification
System Verification
• The general control measures shall be documented in specifications, instructions and procedures or
plans
• Refer:
- Recipes for the food product specifications
- Operations Instruction
- Procedures / plans like purchase plan, hygiene plan, cleaning and disinfection plan,
maintenance plan, education and training plan, etc..
- Pest control plan
- Personnel hygiene practices
• The general control measures shall be validated and shall be subsequently approved by the Food
Safety Team. The effectiveness of the general control measures shall be verified at defined intervals
through the Food Safety Audits.
• Food safety team will identify critical control points and parameters for maintaining the critical
points in the specified i.e., PH, aW, temperature, time, pressure, which ever applicable.
• The Food Safety Team has identified specific control measures that is CCPs at a step for the
identified significant hazard during hazard analysis by applying the decision tree (see Annex at
7.62 of this Manual) and also general control measures related to pre-requisite programme. All
hazards that may be reasonably expected to occur, or likely be introduced at each step, have been
considered in identifying the CCPs.. While selecting CCPs, care has been exercised that on-line
process related parameters which does not require elaborate and time consuming testing but
ensures products safety only have been selected.
• Operational PRP’s based on subjective parameters, as in the case of visual inspection of a product,
process, handling, etc, are supported by work instructions or specifications, education and training.
• The control measures in place for each identified Operational PRP’S have been documented in the
HACCP Plan Worksheets. Their monitoring mechanisms, corrective actions provided, validation and
verification have also been documented in the same.
(Refer to the sections on Monitoring and Measuring, Corrective Actions, Validation, and Verification
of Hazard Analysis Worksheet included in this Manual for more details).
• Control measures not related to CCPs and Operational PRP’s have been classified as Prerequisite
Programmes. In general, these measures achieve control at acceptable levels.
• Prerequisite programmes are documented in the FSM Manual, specifications (including raw
materials, products, etc), instructions (for process, control and operation) and procedures or plans,
e.g. purchase procedures, hygiene procedures (including personal), maintenance schedules,
cleaning and disinfection schedules, and supported by training plans, supervision, etc.
• The effectiveness in controlling the identified hazards of the Prerequisite Programmes is verified at
pre-defined, regular intervals, as further detailed in the section on verification in this Manual.
(Refer PRP Table 1-9 of this Manual)
PRE-REQUISITE PROGRAM
2.4 Facilities
2.4.1 Water supply Water storage at different points is installed with RO and UV
System to prevent micro contamination and under strict
supervision & control.
Refer:
(i) External lab reports.
(ii) In house Water analysis reports
2.4.2 Drainage and waste disposal Drainage system constructed so as they always flow from the
process area to out side. Solid waste will be collected in
plastic garbage bags and moved to garbage collecting area
from there collect is done by the MCH.
Refer : Plant Layout
2.4.3 Cleaning (by cleaning detergent / Adequate facilities are provided for cleaning food utensils and
sanitizer) with surfactant equipment.
Refer :
Equipment cleaning and sanitation procedures
2.4.4 Personnel hygiene facilities and toilets Toilets, change rooms etc are provided away from the
process block.
Toilets are provided with Hand wash facility, disinfectant
soap solution and drier (Hand).
2.4.5 Temperature control Facilities for heating, cooling or freezing food products, or
storing refrigerated or frozen foods are suitable to meet the
specified condition for ensuring food safety.
2.4.6 Air quality and ventilation Ventilation systems are designed and constructed so that air
does not flow from contaminated areas to clean areas and
they can be adequately maintained and cleaned.
2.4.7 Lighting The areas where food is being processed does not have any
window panes and also glass fixtures are properly covered to
avoid the contamination
2.4.8 Storage The processed food is packed in stainless steel vessels in hot
conditions with proper lid/ closures. The articles are then
transferred to Food Service area.
3 Control of operation
3.1 Control of food hazards FS System is being implemented
Refer :
ISO:22000-2005
3.2.4 Microbiological cross - contamination Cleaning and sanitation procedures are in place tp prevent
the microbiological cross contamination.
Refer:
(i) Facilities layout.
(ii) production area entering procedure
(iii) Cleaning Schedules
3.2.5 Physical and chemical contamination The material of construction for cutting trays & plastic crates
where unprocessed food is kept are made of non- particle
releasing. The crates are washed thoughly to remove any
leftover particles/ dust.
Refer :
(i) Decision tree, Hazard analysis worksheet and HACCP plan
3.3.3 Stock rotation All raw materials and ingredients received are labeled with
lot numbers and a first in first out system is followed for the
rotation.
3.4 Packaging
3.4.1 Design and materials Not Applicable because packaging operation is not in the
system.
3.4.2 "Food grade" materials and gases Not Applicable because packaging operation is not in the
system.
3.4.3 Reusable packaging Not Applicable because packaging operation is not in the
system.
3.5 Water
3.5.1 Water in contact with food Water is purified with RO/ U V water purification system, and
then used in the production.
Refer : In house Water Analysis Report
3.5.2 Reuse of re-circulated, treated water Not applicable, because re-circulated water is not in use.
3.5.3 Reuse of re-circulated, non - treated Not applicable, because re-circulated water is not in use.
water
3.5.4 As an ingredient (Potable water) Refer : In house water analysis report
3.6.2 Knowledge required All the managerial and supervisory staff is trained and aware
of food safety and hygiene.
3.7 Documentation and records
3.7.1 Retain records One- year period; after which on revision further retention
will be decided.
3.7.2 Effectiveness and credibility Documents are maintained & verified regularly by
appointments at various sections of operation.
3.8 Recall procedures
3.8.1 Effective procedures A well defined Product Recall Program is in place.
Refer :
SOP on Product Recall, Tracing & tracking, Destroying.
Disposal/ Reprocessing
3.8.2 Tracing and tracking Where a product has been withdrawn because of an
immediate health hazard, other products which are produced
under similar conditions, and may need to be withdrawn. The
need for public warnings shall be considered.
Refer :
SOP on Product Recall, Tracing & tracking, Destroying.
Disposal/ Reprocessing
3.8.3 Destroy or reprocess Recalled products shall be held under supervision until they
are destroyed/ disposed off
Refer:
SOP on Product Recall, Tracing & tracking, Destroying.
Disposal/ Reprocessing
4 Establishments: Maintenance and Sanitation
4.1 Maintenance and cleaning
4.1.1 General Equipment maintenance and cleaning procedures.
Refer:
Check list on subject
4.1.2 Cleaning procedures and methods Well defined
Refer:
Check list on subject
4.2 Cleaning programmes
4.2.1 Specifications Responsibility for Areas, Items of equipment, Utensils,
Containers, Method and frequency of cleaning, monitoring
arrangements etc are to be well defined
4.2.2 Monitoring and verification Equipment cleaning program- frequency , area, responsibility
Refer : check list for supervisors
4.3 Pest control
4.3.1 General (i)GHP
Refer : Standing orders on subject
(ii)Effective Pest control
Refer: pest control programme.
4.3.2 Preventing access (i) No windowpanes in the production area.
(ii) Proper air curtains and facilities are provided to prevent
access of pest in production area.
(iii) Security person will take care of animals not to enter.
4.3.3 Harborage and infestation (i) Air tight S.S containers are provided to store the food
items.
(ii) Pest free walk in cooler & refrigerator are there for
storing food stuff & raw materials
(iii) Good house keeping practices in place.
4.3.4 Monitoring and detection Pest control activity records are available
Refer :
Program on Pest Control:
4.3.5 Eradication Use of Non residual chemical Process areas excluded from use
of chemicals
Refer :
Program on Pest control;
4.4 Waste management
4.4.1 Removal, storage Waste is collected in bags and immediately shifted to garbage
area, which is being cleared by MCH every day.
4.4.2 Cleaning Cleaning is in place.
4.5 Sanitation systems
4.5.1 Monitoring Sanitation systems are in place.
Refer : Cleaning schedules;
Daily check lists of KST Supervisors;
4.5.2 Verification Sanitation systems shall be periodically verified by inspection
or, where appropriate, by microbiological sampling of
environment and food contact surfaces and regularly
reviewed and adapted to reflect changed circumstances.
Remarks:
Verification by monthly microbiology monitoring. In case of
changes required in procedures only division can change
after due validation
Refer : In house lab Reports
Program on microbiological Monitoring
4.5.3 Review Sanitation system shall be regularly reviewed and adapted to
reflect changed circumstances.
GOOD HYGIENE PRACTICES
5 Establishment : personal hygiene
5.1 Health status
5.1.1 Access prevention Regular Medical Check up to all the associates and Production
workers in twice in a year basis. Onsite observation by area
supervisors
Appropriate procedures are in place
Refer :
(i) Medical reports
(ii) Informatory Sign Boards at places of work
(iii) Illness & Injuries Report Register
5.2 Illness and injuries
5.2.1 Conditions to be reported Medical Examination reveals any diseases that are exist at
that time. Regular observations by area supervisors will lead
to further action required
Refer :
(i) Medical reports
(ii) Informatory Sign Boards at places of work
(iii) Illness & Injuries Report Register
5.3 Personal cleanliness
5.3.1 Protective clothing Protective equipment like shoes, head caps are mandatory
where ever applicable inside the Kitchen.
Refer:
Program on personnel hygiene:
5.3.2 Cuts and wounds Area supervisor will act on these issues as and when arises
Refer : program on personnel hygiene:
5.3.3 Washing hands Wash facilities provided at toilets and at process area
entrance. Procedures to clean the hands were provided in
place.
Refer :
Program on good Manufacturing practices:
5.4 Personal behavior
5.4.1 Smoking, eating, sneezing Smoking , spitting, chewing & eating activities are strictly
prohibited inside the plant and process areas except
designated areas
Refer :
(i) Program on personnel hygiene / habits
(ii) Program on good Manufacturing practices:
5.4.2 Jewellery Personal working in the process areas are not allowed to
wear loose jewellery
Refer:
Program on personnel hygiene / habits
5.5 Visitors
5.5.1 Cleanliness and behavior Visitors wear caps; sanitize hands and then only lead to the
production area.
Refer:
Visitors policy procedures
6.0 Transportation
6.1 General Closed SS containers are being used during food Serving &
Food Dispatch/Serving.
6.3 Use and maintenance Regular cleaning of food carrying SS containers is being done.
HACCP PLAN:
2 Plain Cleaning Physical: Extraneou - i)inspect As and store man Refer: i)Get the i.Reject
rice of rice presence s matter/ ion of when Raw rice on
of foreign foreign stock done material cleaning record
particles particles arrived data redone ii.Vendo
ii)superv sheet ii)Return to r,
ising supplier if compla
rice foreign nts
cleaning matter is record
more
• The HACCP plan is documented for each CCP which includes food safety hazard critical limit
monitoring procedure and corrective actions required with responsibilities and authorities.
Refer HACCP Plan…
• For each food hazard that is to be controlled by HACCP plan CCPs are determined by CCP decision
tree. The CCP decision includes
• XYZ has defined the critical limit(s), which must be met at all times during the operation for the
various parameters. Also, normal operational target values have been indicated are the various
parameters, as well as the action limit values which indicate when intervention in the operation is
required in order to continuously meet the critical limits.
• The critical limit(s), action limit(s) and target value for each parameter have been documented in
the OPRP & HACCP Plan associated with each CCP and or Operational PRP.
• When determining the critical limits and the deduced action limits and target value, the
requirements of the relevant legislation and regulations and/or internal risk analysis for the safety
of foodstuffs has been considered as requirements. These have been identified / referenced in the
HACCP Plan associated with each CCP.
• Monitoring is the scheduled measurement or observation of a CCP relative to its critical limit.
• Monitoring details has been elaborated below, through which answer for following four questions
are obtained:
• Measurement/ observation for each product and for each CCP has been identified and indicated in
HACCP plan. Records associated with the monitoring have been indicated in relevant Column.
• The Monitoring Devices shall be identified though the list of Monitoring Devices, The methodology
for calibrating the monitoring devices shall be calibrated
(Refer Records of calibration of Monitoring Devices)
• The results of monitoring process parameters (with the calibrated instruments shall be recorded)
• For the identified CCPs, it is ensure that Corrective Actions are initiated and implemented in case
action limit value or a critical value is exceeded the cause of the deviations shall be analyzed and
documented with the justification for the corrective action initiated and responsibilities and
authorities of the personnel involved
- With respect to the product- temporary hold of the product/batch, blockades to product
recall, identification of nonconforming product, rework, disposal/ destruction of
product/batch.
- With respect to process- adjusting the process, adjustment/ correction of process conditions.
• Specific corrective actions have been established for each CCP in order to deal with deviations
when they may occur. The actions taken ensure that the CCP has been brought under control.
7.7 UPDATING OF THE PRELIMINARY INFORMATION AND DOCUMENTS SPECIFYING THE PRP’S
AND HACCP PLAN)
- The general principles of Food Hygiene as per Codex Standard for the food sector referred in the
scope are in place. An audit checklist based on Codex Standard prepared to conform to food
hygiene, personnel hygiene and good manufacturing practices for the applicable food sector.
- The compliance of which is being ensured during internal audit by the assigned auditor.
Note-Like the products and the process, the PRP is subjected to the hazard analysis in order to identify
potential hazards and to decide in which way the hazards (risk) need to be controlled.
• XYZ’s Food Safety team updates the information of the PRP, Operational PRP’s and HACCP Plan
whenever new products are introduced or any new equipment are installed or any change of
control measures or process flow or any change in intended use would be required
• The main function of verification is to determine compliance with the specification of the FS System
and to confirm that the FS System is working effectively through the application of auditing,
procedures and tests including random sampling and analysis. The frequency of verification activity
which inter-alia include the following should be sufficient to confirm that the FS System is working
effectively:
• Verification of CCP Monitoring - In-charge quality assurance reviews the performance of CCP
operation with respect to the following:
- Critical Control Limits- This review is to ensure that the records are complete and to verify that
the documented values are within the critical limits. This review is done at regular intervals, for
each product and is submitted on prescribed format. This report is reviewed by FS Team Leader.
- Conducting Test/Analysis- This is to verify that the results of test or analysis corroborate the
purpose or intent of the CCP’s. This verification is done at regular intervals specified in for each
product and records maintained.
• This verification answers the questions, whether Food Safety plan is controlling hazards? and is the
Food Safety Plan still controlling hazards? It is a thorough review of hazard analysis to address
specific hazards to determine if they are controlled. A reassessment of the adequacy of the plan is
done on any changes that could affect the hazard analysis or alter the plan in any way such as raw
materials, source of raw materials, product formulation, processing methods or system, intended
use or consumers of the product, product distribution system etc, or at least annually.
Audits
• In addition, internal audits (Refer: FSMS Manual Doc.No.XYZ./FSMSV-8.4.1) and external audits also
provide feed back on effective implementation of the system and provide evidence for verification.
Documentation and Records
• The Food Safety Team has established an efficient documentation and record keeping the relevant
FS System Procedures have been maintained separately. Records are kept from all areas, which
are critical to product safety to demonstrate that the Food Safety system is in compliance with the
documented system, some of them are indicated below:
• The product identification and traceability is required because of one or more of the following
reasons:
- Status of the food products at all stages of manufacturing
- Contractual requirement, wherein the food product is marked by a specific mark or
code for subsequent verification by the customer
- Intended use of application
• Food product identification starts with the receipt of the raw materials / ingredients and ends with
the delivery and serving of the food product, clearing of the used crockery, housekeeping of the
place and disposal of the left-over food. The identification and traceability helps in effective stock
rotation and ensures product recall, if called for.
The organization has established a traceability system that enables the identification of product lots and
their relation to raw material, processing and delivery record for identifying incoming material for the
immediate suppliers. Traceability record shall be maintained for a definite period for system assessment
to enable the handling of potentially unsafe product. Record shall be in accordance with the statutory and
regulatory requirements
7.10.1 Corrections
• It includes:
- Necessary corrective actions are taken up by the respective chefs to prevent recurrence of
nonconformities noticed.
- Corrective actions are carried out as per procedure for corrective and preventive action which
includes:
• For each critical control point, in the associated OPRP & HACCP Plan, XYZ has documented (or
referenced) the corrective actions to be taken if an action limit value or critical limit is exceeded.
The procedure includes the process to investigate the cause of the deviation.
• The Food Safety Team is considered as Emergency Team for responding to critical limit
deviations. The team evaluates the causes of deviation and decides which additional preventive
actions are to be taken.
7.10.3 Handling of potentially unsafe products
7.10.3.1 General
• XYZ has also established arrangements that provide for recall of the products from the
market place and/or from end consumers. Proper product identification and a “tracing and
tracking” system are operational. These are detailed in the Handling of Potentially Unsafe
Products Procedure.
• All corrective actions taken, the causes and consequences, and the individuals involved in the
corrective action are recorded. The effectiveness of the corrective action (for both process
and product) is evaluated.
7.10.3.4 Withdrawals
• XYZ has established a procedure for withdrawal of end product which have been identified
as unsafe
• The withdrawal activity in XYZ is initiated by FST Leader.
8.1 General
• Validation is done to ensure that the hazards originally identified are complete and correct and that
the hazards are effectively controlled
• Food Safety Team shall plan and implement the processes needed to validate control measures,
combinations and verify and improve the system.
8.2 Validation of The Control Measures Combinations
• Validation is activity prior to authorizing HACCP Plan. For this, organization has constituted a
Validation team comprising of following:
• It is the responsibility of the validation team to review that effectiveness after supporting evidence
used in the HACCP study i.e., control measures, monitoring system for PRP , OPRP and CCP &
corrective actions taken for any deviations
a) Initial Validation
• The HACCP Plan prepared by the FS Team has been validated for its adequacy and completeness by
the validation team. Validation has been performed on the basis of the quantifiable and objective
historical results from on-line quality control monitoring, end product testing, and customer
complaints and by demonstrating that:
- the established list of potential hazards is based on sound scientific data and has included all
hazards,
- questions used to assess the significance are answered using sound scientific and technical
knowledge,
- the control measures(general and specific) are appropriate to control the hazards,
- fluctuations of the control parameters(equivalent to process criterion) within the defined critical
limits will not affect the safety of the product,
- parameters and methods used to monitor the control measures are appropriate,
- corrective actions are appropriate and will prevent the release of unsafe products and provide
evidence that the situation can be corrected immediately
Note- Food business operators produced safe food for many years before the introduction of the HACCP
system. Therefore, historical results from on-line Quality Control monitoring, end product testing,
customer or consumer complaints are used as evidence when validating HACCP plans. It is important to
note that the data must be quantifiable and objective if it is to be useful.
b) On going validation
• Critical Control limits are validated once in a quarter to confirm whether they are still valid. If not
providing the degree of confidence envisaged, new limits are established. The FS system is also
validated by the team whenever:
- CCP,s are changed/modified,
- Process changes takes place affecting food safety,
- Equipment changes/replacement occur affecting food safety,
- Major system failures occur
MAINTENANCE STATUS
VERIFICATION STATUS
CALIBRATION STATUS
MONITORING RECRD
COMPLAINT IF ANY
REMARKS IF ANY
CRITICAL LIMIT
CCP OBJECTIVE
TEST STATUS
PRODUCT
CCP NO
CCP
8.1 General
• The objective of validation is to ensure that the hazards originally identified by the Food Safety
Team are complete and correct and that they will be effectively controlled under the proposed plan.
• To meet the objectives of validation, the effectiveness of the supporting evidence used in the HACCP
study as well as the general and specific control measures, the monitoring system and the corrective
actions have been reviewed.
• Each time XYZ operation changes in a manner that could adversely affect food safety the
corresponding OPRP & HACCP Plan/s is/are updated.
• Validation is performed by the Validation Team’s independent review of the following:
− The established list of potential hazards is based on sound scientific data and has included all
hazards.
− The questions used to assess the significance are answered using sound scientific and technical
knowledge.
− The control measures (OPRP’s & CCP’s) are appropriate to control the hazards, i.e. to prevent
or eliminate, to reduce or maintain at an acceptable level
− Fluctuations between target values and action limits will not affect the safety of the product.
− The parameters and methods used to monitor the control measures are appropriate
• XYZ have produced safe food in their earlier assignments. Therefore, historical results from on-line
quality control monitoring, end product testing, and customer or consumer complaints have been
used as evidence when validating OPRP & HACCP Plans.
• XYZ has established and maintained a monitoring (and/or measuring, as appropriate) system for
effective and efficient control of the Critical Control Points.
• The monitoring and measuring system is defined in the OPRP & HACCP Plan associated with each
CCP, and includes all planned measurements, observations and analysis of the control parameters
determining that the CCP is under control.
• The Plan associated with each CCP documents (or references) the following aspects:
• The method for establishing the reliability of the measurements and/or the equipment (calibration).
• Where measurements and product tests by subcontractors are used as a means of monitoring /
measuring, these are generally done from recognized laboratories.
• The results of the monitoring are documented by means of records (as indicated in the Plan) and the
practices are described in process control plans (as referenced in the Plan).
• XYZ has established and implemented procedures for the verification of the Food Safety
Management System. The main purpose of verification is to determine compliance with the
specifications of the Food Safety Management System and to confirm that the system based on ISO
22000:2005 standard is working effectively through the application of (auditing) methods,
procedures, tests (including random sampling and analysis) and other evaluation, in addition to
monitoring.
• Internal audits are conducted based on the schedule drawn up to determine whether the Food
Safety Management System
- Conforms to the planned arrangements for meeting the product realization, ISO
22000:2005 and Food Safety Management System requirements.
- Is effectively implemented and maintained
• XYZ has defined an internal audit program, taking into consideration the status and importance of
the processes and areas to be audited, as well as the results of previous audits. The audit criteria,
scope, frequency and methods are defined generally in the Internal Food Safety Audits
• Selection of auditors and the conduct of audits are done in such a way as to ensure objectivity and
impartiality of the audit process. Auditors do not audit their own work.
8.4.1.2 Internal Audits are planned taking into consideration the importance of the processes and
activity being audited and results of the previous audits.
8.4.1.3 Scope, audit criteria, frequency and methods of auditing are defined in procedure for internal
food safety audits.
8.4.1.4 This procedure also identifies the responsibility and requirements for planning and
conducting audits, for reporting the results and maintaining the records.
8.4.1.5 Trained personnel to ensure objectivity and impartiality conduct internal audits.
8.4.1.6 The personnel responsible for the area audited identify and implement the necessary
corrective actions to eliminate the recurrence of the reported nonconformance. The corrective
actions taken up by the auditee are verified and the verification is recorded.
• XYZ determines whether the FSMS:
• Verification aspects are covered under the Internal Food Safety Audits. The Internal Audit
Procedure describes the internal audit and verification methodologies which are carried out as per
the Verification plan at XYZ, together with the responsibilities and requirements for planning and
conducting audits, for reporting results and maintaining records.
• The analysis of data by Food safety team including internal and external audits provides
information relating to
- Customer satisfaction
- Product conformity
- Characteristics and trends of processes and products including opportunity for preventive
action
- Suppliers
8.5 IMPROVEMENT
8.5.1 Continual Improvement:
• Based on the analysis of data and results of audit, areas needing improvement are identified to initiate
necessary corrective and preventive actions.
• Where appropriate, the relevant Food Safety Objectives and Food Safety Policy are revised and
reviewed in meetings to focus on improvement
• XYZ continually improves the effectiveness of the Food Safety Management Systems through the
use of :
• XYZ ensures that FSMS is continuously updated by evaluation and updating activities like
a. Inputs from communication, information with reference to FSMS
b. Input from information concerning the suitability, adequacy and effectiveness of the
FSMS and Statutory and regulatory bodies
c. Outputs from verification activities and management review.
d. Output from management review meetings