This document lists 40 international standards that have been digitized and uploaded to the network. The standards are organized into 6 groups covering topics like general terminology, machinery safety, mechanical systems, fluid systems, energy transfer engineering, and road vehicles. Some examples of standards included are those relating to road vehicle dimensions (ISO 612), fan performance testing (ISO 13350), hydraulic pumps and motors (ISO 3662), internal combustion engine piston rings (ISO 6621), and compressed natural gas vehicle fuel systems (ISO 15500-6,7,8).
This document lists 40 international standards that have been digitized and uploaded to the network. The standards are organized into 6 groups covering topics like general terminology, machinery safety, mechanical systems, fluid systems, energy transfer engineering, and road vehicles. Some examples of standards included are those relating to road vehicle dimensions (ISO 612), fan performance testing (ISO 13350), hydraulic pumps and motors (ISO 3662), internal combustion engine piston rings (ISO 6621), and compressed natural gas vehicle fuel systems (ISO 15500-6,7,8).
This document lists 40 international standards that have been digitized and uploaded to the network. The standards are organized into 6 groups covering topics like general terminology, machinery safety, mechanical systems, fluid systems, energy transfer engineering, and road vehicles. Some examples of standards included are those relating to road vehicle dimensions (ISO 612), fan performance testing (ISO 13350), hydraulic pumps and motors (ISO 3662), internal combustion engine piston rings (ISO 6621), and compressed natural gas vehicle fuel systems (ISO 15500-6,7,8).
I. Nhóm 01 Generalities. Terminology. Standardization. Documentation 01.040 Road vehicles engineering Road vehicles - Dimensions of motor vehicles and 1 ISO 612 01.040 towed vehicles - Terms and definitions Internal combustion engines – Piston rings - Part 1: 2 ISO 6621-1 01.040 Vocabulary 01.040 Energy and heat transfer engineering (Vocabularies) Norm international - Reciprocating internal 3 ISO 7967-1 combustion engines – Vocabulary of components 01.040 and systems - Part1: Structure and external covers 01.080 Graphical symbols for use on specific equipment Road vehicles – Symbols for controls, indicators 4 ISO 2575 01.080 and tell-tales II. Nhóm 13 Environment. Health protection safety 13.110 Safety of machinery Positioning of safeguards with respect to the 5 13.110 ISO 13855 approach speeds of parts of the human body Interlocking devices associated with guards - 6 13.110 ISO 14119 Principles for design and selection Guards - General requirements for the design and 7 13.110 ISO 14120 construction of fixed and movable guards Permanent means of access to machinery - Part 3: 8 13.110 ISO 14122-3 Stairs, stepladders and guard-rails Permanent means of access to machinery - Part 4: 9 ISO 14122-4 13.110 Fixed ladders Anthropometric requirements for the design of 10 ISO 14738 13.110 workstations at machinery III. Nhóm 21 Mechanical systems and components for general use 21.040 Special screw threads Pipe threads where pressure – tight joints are not 11 made on the threads - Part 2: Verification by means 21.040 ISO 228-2 of limit gauges Pipe threads where pressure-tight joints are not 12 made on the threads – Part 1: Dimensions, 21.040 ISO 228-1 tolerances and designation Pipe threads where pressure-tight joints are made on 13 the threads - Part 1: Dimensions, tolerances and 21.040 ISO 7-1 designation 21.120 Balancing and balancing machines Industrial fans – Specifications for balance quality 14 ISO 14694 21.120 and vibration levels AMENDMENT 1 15 ISO 13349 Fans - Vocabulary and definitions of categories 21.120 Industrial fans – Mechanical safety of fans – 16 ISO 12499 21.120 Guarding IV. Nhóm 23 Fluid systems and components For general use 23.040 Iron and steel pipes Carbon steel tubes suitable for screwing in 17 ISO 65 23.040 accordance with Iso 7/1 18 ISO 4145 Non-alloy steel fittings threaded to Iso 7/1 23.040 23.100 Cylinders Fluid power systems and components – Cylinders – 19 ISO 4393 23.100 Basic series of piston strokes Fluid power systems and components – Cylinders 20 ISO 4395 23.100 piston rod end types and dimensions 23.100 Pumps and motors Hydraulic fluid power – Pumps and motors – 21 ISO 3662 23.100 Geometric displacements 23.120 Ventilators. Fans. Air Conditioners ISO 13348 Industrial fans -Tolerances, methods of conversion 22 23.120 and technical data presentation 23 ISO 13350 Industrial fans – Performance testing of jet fans 23.120 V. Nhóm 27 Energy and transfer engineering 27.020 Internal combustion engines Methods of test for full - flow lubricating oil filters for internal combustion engines - Part 4: Initial 24 ISO 4548-4 27.020 particle retention efficiency, life and cumulative efficiency (gravimetric method) Methods of test for full - flow lubricating oil filters 25 ISO 4548-11 for internal combustion engines - Part 11: Self – 27.020 cleaning filters Methods of test for full - flow lubricating oil filters for internal combustion engines - Part 12: Filtration 26 ISO 4548-12 27.020 efficiency using particle counting, and contaminant retention capacity Reciprocating internal combustion engine driven 27 ISO 8528-1 alternating current generating sets – Part 1: 27.020 Application, ratings and performance Reciprocating internal combustion engine driven 28 ISO 8528-2 27.020 alternating current generating sets – Part 2: Engines Reciprocating internal combustion engine driven ISO 8528-3 29 alternating current generating sets – Part 3: 27.020 Alternating current generators for generating sets ISO 8528-4 Reciprocating internal combustion engine driven 30 27.020 alternating current generating sets – Part 4: Control gear and switchgear Reciprocating internal combustion engine driven ISO 8528-5 31 alternating current generating sets – Part 5: 27.020 generating sets Reciprocating internal combustion engine driven ISO 8528-10 alternating current generating sets – Part 10: 32 27.020 Measurement of airborne noise by the enveloping surface method Reciprocating internal combustion engine driven 33 ISO 8528- 12 alternating current generating sets – Part 12: 27.020 Emergency power supply to safety services VI. Nhóm 43 Road vehicles engineering 43.040 Couplings 34 ISO 3842 Road vehicles – Fifth wheels – Interchange ability 43.040 43.040 Transmissions, suspensions 35 ISO 3006 Passenger car road wheels – Test methods 43.040 43.060 Engine bloc and internal components Internal combustion engines – Piston rings - 36 ISO 6621-5 43.060 Part 5: quality requirements Internal combustion engines – Piston rings 37 ISO 6621-3 43.060 Part 3: Material specifications 43.060 Fuel systems Road vehicles – Compressed natural gas (CNG) 38 ISO 15500-6 43.060 fuel system components – Part 6: Automatic valve Road vehicles – Compressed natural gas (CNG) 39 ISO 15500-7 43.060 fuel system components – Part 7: Gas injector Road vehicles – Compressed natural gas (CNG) 40 ISO 15500-8 43.060 fuel system components – Part 8: Pressure indicator Road vehicles – Compressed natural gas (CNG) 41 ISO 15500-16 43.060 fuel system components – Part 16: Rigid fuel line 43.140 Motorcycles and moped Motorcycles – Test and analysis - Procedures for ISO 13232-3 research evaluation of rider crash protective 42 43.140 devices fitted to motorcycles - Part 3: Motorcyclist anthropometric impact dummy. Motorcycles – Test and analysis - Procedures for ISO 13232-6 research evaluation of rider crash protective 43 43.140 devices fitted to motorcycles - Part 6: Full - scale impact - test procedures Motorcycles – Test and analysis - Procedures for research evaluation of rider crash protective ISO 13232-7 44 devices fitted to motorcycles - Part 7: Standardized 43.140 procedures for performing Computer simulations of motorcycles impact tests 45 Motorcycles – Test and analysis - Procedures for 43.140 ISO 13232-8 research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports VII. Nhóm 53 Materials Handling Equipment 53.020 Accessories for lifting equipment Cranes and lifting appliances - Selection of wire 46 ISO 4308-1 53.020 ropes - Part 1: General Cranes and lifting appliances - Selection of wire 47 ISO 4308-2 ropes - Part 2: mobile cranes; coefficient of 53.020 utilization Cranes - Control layout and characteristics - Part 1: 48 ISO 7752-1 53.020 General principles Lifting appliances – Controls - Layout and 49 ISO 7752-2 characteristics - Part 2 : Basic arrangement and 53.020 requirements for mobile cranes Cranes – Controls - Layout and characteristics - Part 50 ISO 7752-3 53.020 3: Tower cranes Cranes – Controls - layout and characteristics - Part 51 ISO 7752-4 53.020 4: Jib cranes Lifting appliances – Controls - Layout and 52 ISO 7752-5 characteristics - Part 5 : Overhead travelling cranes 53.020 and portal bridge cranes 53.020 Cranes Cranes - Classification 53 ISO 4301-2 53.020 Part 2: Mobile cranes Cranes – Classification 54 ISO 4301-3 53.020 Part 3: Tower cranes Cranes and related equipment - Classification 55 ISO 4301-4 53.020 Part 4: Jib cranes Cranes – Classification 56 ISO 4301-5 53.020 Part 5: Overhead travelling and portal bridge cranes 53.020 Lifting appliances in general Cranes and lifting appliances – Classification - Part 57 ISO 4301-1 53.020 1: General VIII. Nhóm 77. Metallurgy 77.040 Mechanical testing of metals Sintered metal materials, excluding hard metals – 58 ISO 3325 77.040 Determination of transverse rupture strength Sintered metal bushes – Determination of radial 59 ISO 2739 77.040 crushing strength Sintered metal materials, excluding hard metals – 60 ISO 2740 77.040 Tensile test pieces Metallic materials – Fatigue testing – Axial force – 61 ISO 1099 77.040 controlled method 77.040 Other methods of testing of metals Hard metals – Determination of (The 62 ISO 3326 77.040 magnetization) coercivity 77.080 Ferrous metals Steel and iron – Sampling and preparation of 63 ISO 14284 samples for the determination of chemical 77.040 composition 77.120 Flat steel products and semi-products Cold - reduced electrolytic chromium/chromium 64 ISO 11950 77.120 oxide-coated steel Cold - reduced black plate in coil form for the 65 ISO 11951 production of tin plate or electrolytic 77.120 chromium/chromium oxide - coated steel 77.140 Heat – Treatable steels 66 ISO 4954 Steels for cold heading and cold extruding 77.140 67 ISO 4955 Heat - resistant steels 77.140 Continuous electrolytic tin - coated cold - reduced 68 ISO 5950 carbon steel sheet of commercial and drawing 77.140 qualities Heat - treatable and alloy steels; surface quality 69 ISO 9443 classes for hot - rolled round bars and wire rods; 77.140 technical delivery conditions 70 ISO 11949 Cold - reduced electrolytic tinplate 77.140 77.140 Steels for reinforcement of concrete Steel for the reinforcement and prestressing of 71 ISO 15630 - 1 77.140 concrete – Test methods Steel for the reinforcement and prestressing of 72 ISO 15630 - 2 77.140 concrete – Test methods - Part 2: Welded fabric Steel for the reinforcement and prestressing of 73 ISO 15630 - 3 77.140 concrete – Test methods - Part 3 : Prestressing steel Epoxy – coated steel for the reinforcement of 74 ISO 14654 77.140 concrete Epoxy – coated strand for the prestressing of 75 ISO 14655 77.140 concrete Epoxy –powder and sealing material for the coating 76 ISO 14656 77.140 of steel for the reinforcement of concrete 77.160 Powder metallurgy Sintered metal materials, excluding hard metals – 77 ISO 2738 permeable sintered metal materials – Determination 77.160 of density, oil content and open porosity Permeable sintered metal materials – Determination 78 ISO 4003 77.160 of bubble test pore size Permeable sintered metal materials – Determination 79 ISO 4022 77.160 of fluid permeability