Mucil
AB BAR TRUE BYPASS A/B SWITCHER
OWNER’S MANUAL
Be sure to read this manual before using the product in order to ensure safe operation.1- Overview
TUNER) CLEAN Loop A|LooP B ByepSs
I
1 2 3
CIRCUIT DIAGRAM
(1) TUNER/CLEAN
This switch choose the output channel LOUT or CLEAN, LOUT is the output after
LOOPA or LOOPB, CLEANis the output before LOOPA or LOOP, the output
channel is LOUT when led is off or change to CLEAN channel when led is on.
(2) LOOPA/LOOPB
This switch choose the external loop path LOOPA or LOOPB.
(3] BYPASS
This switch engages or bypasses external loop, when the external loop (LOOPA
or LOOPB) is bypassed, the indicator led of LOOPA or LOOPB will be off.
(4) LouT
The output channel after external loops
(5) CLEAN
The output channel before external loops.(6) LOOPB RETURN
The return jack of LOOPB, connects to output of external effect(s).
(7) LOOPB SEND
The send jack of LOOPB, connects to input of external effect(s).
(8) LOOPA RETURN
The return jack of LOOPA, connects to output of external effect(s).
(9) LOOPA SEND
The send jack of LOOPA, connects to input of external effect(s)
(10) INPUT
Input jack, connects to guitar.
(11) DC JacK
5.5.x 2.1 mm type, use negative center type, DC 9V to DC12V.
(12) OUTPUT CHANNEL LED
This led indicates the output channel, output to LOUT jack when the led is off,
Output to CLEAN jack when the led is on
(13) LOOPB STATUS LED
This led indicates LOOPB status, LOOPB is active/inactive when the led is on/off
(14) BUF B
Depress this button to activate the buffer before sending to LOOPB, some vintage
pedal like fuzz and wah perform better with a buffer in front of them.
(15) BUFA
Depress this button to activate the buffer before sending to LOOPA, some vintage
pedal like fuzz and wah perform better with a buffer in front of them.
(16) LOOPA STATUS LED
This led indicates LOOPA status, LOOPA is active/inactive when the led is on/off
2- Specifications
Dimensions. .7,88(L) x1 A2(W)X1. 30(H) inch
Weight... wes+200Q
Power Supply. “DeSV to 12
Current Drain -max. 10mA
Stomp Switches 3PDT true bypass type3. Typical Configuration 1
In this configuration, engage TUNER/CLEAN switch (led on) will switch the guitar
signal to a tuner, atthe same time the LOUT is muted.
LOOPA/LOOPB switch choose effects chain A or chain B.
Effects Chain B Effects ChainA
o#m|
LOOP A/ LOOP B4. Typical Configuration 2
In this configuration, TUNER/CLEAN switch off (led off) choose AMP A, switch on
(led on) choose AMP B. LOOPA/LOOPB choose effects chain A or chain B
when feeds signal to AMP A.
Effects Chain 1
Effects Chain 2
‘TUNER / CLEAN5. Typical Configuration 3
In this configuration, use AB BAR to choose 3 different guitars as input,
Path1 - Acoustic Guitar -> Input-> Clean out-> Acoustic Guitar Amp
(“BYPASS’ on, “CLEAN” on)
Path2 - E Guitar A -> Return A-> LOUT-> Electrical Guitar Amp
( “BYPASS” off, “CLEAN” off, “LOOPA” on )
Path3 - E Guitar B -> Return B-> LOUT->Electrical Guitar Amp
(“BYPASS’ off, “CLEAN” off, “LOOPB” on )
@ecvcce 20 eocecce se
Electrical Guitar AMP ‘Acoustic Guitar AMP
eB
TUNER / CLEAN LOOP A/ LOOP B