Professional Documents
Culture Documents
Question On Welding 36 PDF
Question On Welding 36 PDF
MIG
MIG welding tends to be susceptible to lack of fusion problems. This is because of:
a. Poor maintenance of equipment
b. Incorrect settings
c. Poor inter-run cleaning
d. All the above
A common gas mixture used in MIG welding nickel alloys, to combine good levels of
penetration with good arc stability would be:
a. 100% CO2
b. 100% argon
c. 80% argon and 20% CO2
d. 98% argon and 2% oxygen
Submerge
Which of the following is likely to give the highest impact strength in ferritic weld metal?
a. Cellulosic electrodes.
b. Submerged arc with acid flux.
c. Spray transfer CO2 welding.
d. Basic coated MMA electrodes.
.
Submerged arc welds made with re-cycled flux are liable to:
a. Porosity.
b. Course grain size.
c. Undercut.
d. Incomplete penetration