Professional Documents
Culture Documents
Day temperature
. The use of flux with gas shielded metal arc welding allows:
a. Sheet metal to be welded
b. A stable arc when using high current densities
c. Aluminium to be welded
d. Less dilution of the weld by the parent metal
The voltage necessary to maintain an arc during metal arc welding is termed:
a. Mains supply voltage
b. Arc current
c. Arc voltage
d. Open circuit voltage
When manual metal arc welding low carbon steel, which electrode covering will give the
greatest degree of penetration?
a. Iron powder.
b. Rutile.
c. Cellulosic.
d. Low hydrogen
Tig
When TIG welding austenitic stainless steel pipe, argon gas backing is called for. This is to:
a. Prevent oxidation
b. Prevent underbead cracking
c. Prevent porosity
d. Control the penetration bead shape
. Inherent rectification of the electrical output is produced in the arc when TIG welding using:
a. AC with a suppressor
b. AC without a suppressor
c. DC with reverse polarity
d. DC with straight polarity
Which defect would you expect to get in TIG welds in non-deoxidised steel?
a. Undercut.
b. Porosity.
c. Tungsten inclusions.
d. Linear misalignment.