sgahsbaarcneneta +: yonneD ‘X
““UoUeRY “IIA
“S@UOSSED0y “|
“= @6es0}s pue uoMepodsued| “1A,
:Bujooys aignoy seinBoxy “A
(jeuodo) yewuoy ey2q JeJUOD UOISsIUSUEN ZEZSH ‘Al
uonesqueo 1yBIE\A
suoneedQ «I
suoneoyioeds «|
SLNALNOO:
v
wens wee! 901) papnjou ous soninunse ou
94) eouenyu [IMM uoudinbs soMod Biq ou Jo GuJUUTY ax) osne22q wouldnt
Mk 4941260) yInouD Aiddns somod owes ayy asn 3,uop 98
‘6209s BuunD
Ue! pue euysuns Bons pony % uoneuodsuen Buunp ssoudwep pue ¥D0US piony'L
-BeJ0}S pue Uoeyodsuel)
Uejuew 3041 Pua :S9N10
vous 10 osry at @BueUD "YoHAS 10 96} HM UEHOIG —
urBsewoos
Joye prenuy suewss yj) sowenunace ay eBueUD “o\qesruN S| so}RUIMEOY (
‘1898 eu UO YOHIMS Ueum KeIdsIP ON
pum ain Jo souanyul 219 2onpe: 0} Jono Ss0I6 195 ‘pUIM aut fa PEOUEMYLL —(
‘yes plore 40 wuoped ay) ueqveug “uLOReR! 405 9¥eYS BuOIS 2 AYSOWU MO?
sunay 2} ue
‘vow 9 98164901 pUE AprEIDEUILN O08 eta YO YOIIMS :OVEINUNODE 10} eBe110N MOT
:Burybiom oaeasun,
:Bupooys a1gnon sejnBoy *
‘sseuppe ouysew puyep J9sn :sSayGdW — Z0-00 Eb ON
1yBioM wun 40} GSH) 6B — LO~00 ‘ZL ON
N40} BSW) 8GO8§ — £0-00 =0N
lun 0} 8S.) L498 — Ld~00 01 ON
foquunu 40} BSH) GO — L000 °6 “ON
(aequinu 40} ASW) S498 — 10~00 :8 ON
sequinu 40} aS1. > po§ — LA-00 LON
eUbIs moysano yyBIem yun ————7q.
sequunu 89u0 sueaut
(0 Yequinu payeinunoge s1 soquinu Suipues ey sueew | ————9q
feBuys moysano soquinu —sa
Jeusis quatoyinsur 6uydwies ———9qide, you can use the scale during recharging
‘onthe scale
12.1100 times of accumulaing
‘*Power supaly
‘Sccumulator side)
fon te. power, Sco Bogs! ecartocing Uc’ geting normal weighing
condition
2. [Zero} key: Set the weight window to zero, and the zero signal deplays.
‘max. four decimal poins, the Unt weight value can't exceed
be calcula mistake
Keyboard, when the unit weight Is zero, press number key “0” to adjust
int number for the unit weight
az
‘AC 220V (210%) / 50 Hz, TIOVIGOHZ, DC SV / 44n (Rechargeable
‘continuously alarm sound. Fer these instance, the weight shouldbe taken away.
(2) The number window csplays “-OF—" wien the number oF accumulated number
‘over 89999. The scale wil nt response ifthe accumulated times over 100, but the
‘calration: Put enough weight on the platform. press [Accu] when display Is
je. The calbraton finish,
forate by any weight: Press [Tare], then weight window dspiays ~~". Unit
weight window and number window don't change. Input the weigh! by keyboard, then
nding weight on the platform, Press CAcoUT when display is sable
ih
sion confer Data format (optional)
41, RS232 setting:
Press “Samp” “funder general weighing mode, the number window display “Ad to sel
the machine address, the unit weight window display the original set address,
the weight window displ press number key t0
the machine address range is from 0-254, press “Accu” key
machine address setting, the num!
window display'CONOFF, “Tare
tose serial
umber
press “Tare” key to
confirm, R232 eetting finished.
2. Data format: Every message include 13 frame, they are following:
No. 1: D0-D7 —— OFFH(start bit)
No. 2: D0-D2— Decimal point position for weight window(1-4. 1 means no
decimal point)
D3~D4 — No
the Baud rate, press “AC.” te
No. 5: DO~D7 — BCD3 HSB for net woight
No. 6: D0~D2 — number of unit weight decimal point (3~5)
D3———— 1 means unit weight is insufficient, 0 means normal
3