Paramoter Name Clay Unit
Waterial model | Model Wohr-Coulomb [=
Type_of material | Type Undrained =
behavior
Sol unit weight | nest 16 kNim?
above — phreatic
level
Sol _unit_weight | You 16 Nn
below —phreatic
level
Permeability in |. ‘0.001 miday
hor. Direction
Permeability in | ky 0.001 miday
ver. Direction
Young's modulus | Ew 10000 kNim?
(constant)
Poisson ratio (nu) 0.35 >
Cohesion Get 30 EN?
(constant)
Friction angle | @ 20 .
Dilitancy angle 0 .
Parameter Name | Clay Peat Sand Unit
Material model Model [Mohr | Mohr |Mohr- | -
Coulomb | Coulomb _| Coulomb
Type of material [Type | Undrained | Undrained |Drained _|-
behavior
Soll unit weight | Yuna | 15 8 16 KN
above phreatic level
Soil_urit weight | yo | 18 7 20 Nm
below phreatic level
Permeability in hor.| K | 1.10" 210" TO miday
Direction
Permeability in ver.[ ky | 1.107 110" 10 miday
Direction
Young's modulus [Er | 1000 350 3000 KN
(constant)
Poisson ratio (nu) | 0.33 0.35 03 -
Cohesion (constant) [cw | 30 20 10 KN?
Friction angle o 2 20 30 =
Diltancy angie v 0 0 0 >Parameter Name | Clay Peal Sand Unit
Material model Model [Mohr | Mohr- | Mohr- |
Coulomb | Coulomb _| Coulomb
Type of material | Type | Undrained | Undrained | Drained | -
behavior
Soil unit weight [Ys | 15 8 76 KN
above phreatic level
Soil unit weight [Yan | 16 71 20 KN
below phreatic level
Permeabiity in hor [K, [1107 |210* | 10 miday
Direction
Permeabiity in ver.[ky [4107 [4.107 [4.0 miday
Direction
Young's modulus |E= 1000 360 3000 KN?
(constant)
Poisson ratio o (nu) [033 0:35 03 -
Cohesion (constant) [ew [30 20 10 kNim?
Friction angle o| +(2 20 30 =
Diltancy angio vo 7 0 =
Parameter Name ] Clay] Sand] Unit
layer | layer
Material model Model | Mohe- | Mohr:
Coulomb | Coulomb
Type of material behaviour Type | Drained | Drained | -
Soil unit weight above phreatic level} Youu | 16
Soil unit weight below phreatie level } Yr | 18 20
Permeability in hor. direction ke 0.001 | 1.0
Permeability in ver. direction k 0.001 | 10
‘Young's modulus (constant) Ens | 10000 | 40000
Poisson's ratio v 035 03
on (constant) cg | 50 10
ingle ° 2s 2 °
Dilataney angle y 0.0 20
05 oc7 |.
Strength reduction factor inter. RParameter ‘Name Unit
Type of behaviour Material type
Normal stiffness FA kim
Flexural rigidity El kNm'/m
Equivalent thickness ad m
Weight w N/mm
Parameter Name Value Unit
Type of behaviour Material type | Elastic
Normal stiffness FA 210° kN
Spacing out of plane L, 5.0 m
Maximum force Fonaccomp 1.10" kN
Faxtent 110" kN
Parameter Name | Sand Unit
Material model Wodel | Mohr- ~
Coulomb
Type of material Type | Drained —_]-
behavior
Soil unit weight [Yana | 17 KNim®
above phreatic level
‘Soll unit weight | yax | 20 KN
below phreatic level
Permeability in hor.[K. | 1.0 miday
Direction
Permeability in ver. |k, 10 miday
Direction
Young's modulus}E.; [13000 | kNim?
(constant)
Poisson ratio (nu) [0.3 ~
Cohesion (constant) [ar | 10 kNim?
Friction angle ? a >
Dilitancy angle w 0 =Kekakuan normal
Kekakuan lentur
Tebal ekivalen
erat
Angka Poisson
Parameter Name | Sand Pile | Unit
Material model Model [Mohr | Linear |=
Coulomb _| elastic
Type of material |Type |Drained |Non- |=
behavior porous
Soil unit weight [Yura | 16 24 kNim®
above phreatic level
Soil unit weight [Yea [20 = KNim®
below phreatic level
Permeability in hor. [Kx | 1.0 ~ miday
Direction
Permeability in ver. [ky | 1.0 ~ miday
Direction
Young's modulus [Er | 3000 3.10" [kNim®
(constant)
Poisson rato (nu) [OS 07 |-
Cohesion (constant) [cr | 10 - kNim?
Friction angle ° 30 - °
Dilitancy angle v 0 ~ =Parameter Name [Chy | Sand | Dp Clay | Dpsand_| Un
Material model | Model [MC [MC [MC [MC__|~
Material beh, Type | Drained | drained | Drained | drained | -
Soil unit weight | Yaw | 15 16s | 16 7 kia
above phrcatic level
Soil unit weight] % | 18 ‘| 20 iss | 21 kim?
below phreatic level
poms. {ke [tot fo | rao? Jos | midey
V.permeabiity | f to® [0 | tao fos | miday
Yoimstmodstis | By | 1000 | $0000 | 10900 | 120000. | KN/n?
Increase E Ey | 650 |= : - kimi
Reference level | Yar | 0.0 | - : - m
Poisson's ratio vy foss fos foas Jos -
Cohesion ce [ss [10 | 40 10 kN/at
Friction angle o [24 31 2s 33 .
Dilatancy angle y [00 10 | 00 ae .
Interface strength | Rwy | fiid | rigid | 0.7 o7 -
Parameter Name [Lining [Pilewe | Building | Unit
Type ofbehaviour | Type | Elastic | Elastic
Normalstifiness | Ed | 1.4107
Flexural rigidity = | EY | 1.4340® | 840° 110"
Equivalent thickness | d 03s 0219 }a4ea | m
Weight w 84 20 25 kN/m/m
Poisson's ratio y ous 02 oo :
Parameter Name | Pile Unit
Material type Type _ | Elastic
Normal stiffness EA | 210° kN
Spacing between | Lyne | 1 m
anchors