You are on page 1of 6

Nama : Haris Santoso Jurusan : Teknik Mesin

NIM : 061001700522 Dosen : Rosyida Permatasari, Ph.D

Mekanika Fluida Dasar II


1. In a wind tunnel experiments were conducted with a wind speed of 50 km/h on a flat plate of size 2
m long and 1 m wide. The mass density of air is 1.15 kg/m3 The plate is kept at such an angle that
co-efficients of lift and drag are 0.75 and 0.15 respectively.Determine:
(i) Lift force,
(ii) Drag force,
(iii) Resultant Force, and
(iv)Power exerted by the airstream on the plate.
2. A circular cylinder of 1.0 m diameter and 10 m length is rotated at 420 r. p.m. about its axis when it
is kept is air stream with 11.0 m/s velocity perpendicular to its axis. Determine:
(i) Circulation around the cylinder,
(ii) Theoretical lift and lift co-efficient,
(iii) Position if stagnation points,
(iv) Actual drag and lift force on the cylinder, and
(v) Actual resultant force and its direction.
Take ρ = 1.208 kg/m3, and experimental values of CD and CL as 1.5 and 5.1 respectively.
3. A jet plane weighing 29.4 kN and having a wing area of 20 m2 flies at a velocity of 950 km/h.
When the engine delivers 7350 kW,65 percent of the power is used to overcome the drag resistance
of the wing. Calculate the co-efficient of lift and drag for the wing. Take density of atmospheric air
1.208 kg/m3.

You might also like