This document contains G-code for a CNC lathe program. It performs drilling and cutting operations to create a part. The program sets spindle and coolant settings, rapidly positions the tool to start points, and uses G-code commands like G01, G42, and G71 to cut at specific feed rates and depths along the X and Z axes. It repeats a cutting pattern between line numbers 20 and 30 before ending the program and spindle.
This document contains G-code for a CNC lathe program. It performs drilling and cutting operations to create a part. The program sets spindle and coolant settings, rapidly positions the tool to start points, and uses G-code commands like G01, G42, and G71 to cut at specific feed rates and depths along the X and Z axes. It repeats a cutting pattern between line numbers 20 and 30 before ending the program and spindle.
This document contains G-code for a CNC lathe program. It performs drilling and cutting operations to create a part. The program sets spindle and coolant settings, rapidly positions the tool to start points, and uses G-code commands like G01, G42, and G71 to cut at specific feed rates and depths along the X and Z axes. It repeats a cutting pattern between line numbers 20 and 30 before ending the program and spindle.