Professional Documents
Culture Documents
Alunox - Alunox Axnimocr90
Alunox - Alunox Axnimocr90
Standard
EN ISO 16834-A G Mn4Ni2CrMo (wire)
EN ISO 16834-A G 89 5 M21 Mn4Ni2CrMo
EN ISO 16834-B G 83A 5 M21 N5M3
AWS A5.28 ER120S-G
Area of application
Wire electrode of low-alloyed steel for MAG welding of high strength, tempered fine grain
structural steels. Weld metal for operating temperatures of -50 °C to 450 °C.
Special hints
The mechanical properties are dependent on the shielding gas; optimum weld metal is
achieved under mixed gas M 21 with corresponding welding conditions. Weldable in short arc or
spray arc section. Preheating temperature dependent on base material. Pay attention to controlled
heat input, interpass temperature should not exceed 180°C.
Material properties
Welding process MAG Mechanical
Shielding gas M21 properties of the weld
Test temperature 20°C metal according to
EN ISO 15792-1
0.2%-yield strength Rp [MPa] 900
0.2
Tensile strength R m [MPa] 960
Elongation A (L = 5d) % [%] 15
0 0
Impact strength Av [J] 90
Approvals
(Request current scope if required)
Product forms
Spool Ø mm 0.8 1.0 1.2 1.6
54 | ALUNOX Manual |