2
3, A mass shown in figure-2is initially at rest, When the velocity of 120 mm/s is given to it, find
the subsequent displacement and velocity of the mass, taking ‘C’ as 150 NS/m, k = 10 KN/ m
and W = 250 N.
LL4L4¢4444
kK mc
Figure-2
4, A steel frame shown in figure-3 supports rotating machine that exerts a horizontal force at
girder level F(t) = 900 sin 5:3 t- N. Assume 5% of critical damping, determine :
(@) Steady amplitude of vibration. and (WYRMg max dynamic stress in the columns.
Assume the girder is rigid.
Fa)
Figure-3.
5, A-machine weighing 10 KN is supported on its foundation by spring mounting. The piston on
the machine moves up and down with harmonic frequency of 10 cycles/sec. The piston has a
weight of 0:6 KN and a total stroke of 500 mm. Determine the maximum force transmitted to
the foundation, if the total ‘k;’ ( stiffness) of the spring is $5 kN/cm.
6. Figure-4 shows a 3-DOF system. Determine the stiffness matrix, mass matrix and write its
equation of motion. Assume ky = ky = ky = ky = K and M, = Mz = Ms = M.