Professional Documents
Culture Documents
===========================================================================
7302.10 RAILS, flat bottom, less than 20 kg/m
Op. 21.02.1984 Dec. 21.02.1984 - TC 8341714
7304.19.00 LINE PIPE, seamless, complying with ISO 3183-3, Grade L450QC,
having BOTH of the following:
(a) outside diameter greater than 113 mm but NOT greater than
115 mm;
(b) wall thickness greater than 4 mm but NOT greater than 5 mm
Op. 01.01.2007 Dec. 09.11.2006 - TC 0614210
7304.23.00 DRILL RODS, FRICTION WELDED, having DIN 17MnV6 steel tool joints
Op. 01.01.2007 Dec. 27.03.2007 - TC 0703471
7304.29.00 CASING OR TUBING, OIL OR GAS WELL, seamless, plain end, diameter NOT
exceeding 140 mm
Op. 30.08.1999 Dec. 08.11.1999 - TC 9906606
7304.31 TUBE, seamless, cold drawn, having an outside diameter NOT exceeding
8 mm, an inside diameter NOT exceeding 4 mm, pressure rating NOT
less than 54 900 kPa, to Specification DIN 2413
Op. 08.05.1989 Dec. 26.07.1990 - TC 8903168
7304.31 TUBES, heat exchange and condenser, seamless, cold drawn, carbon
steel, in straight lengths, ends plain, bevelled or threaded BUT
without further rework, to specification ASTM A179/A 179M-88a
Op. 10.02.1992 Dec. 16.07.1992 - TC 9201981
7304.31 TUBES, cold drawn, seamless, to ANY of the following steel grades:
(a) K1006;
(b) K1016;
(c) K1010;
(d) K1020;
(e) K1026,
or ANY of the following tube specifications:
(a) JIS G3445 STKM 11-20;
(b) BS6323:Part 6:1982;
(c) ASTM A513,
and having BOTH of the following:
(a) carbon content NOT less than 0.06% and NOT greater than 0.4%
by weight;
(b) OD NOT less than 6.4 mm and NOT greater than 203.2 mm
Op. 27.07.1992 Dec. 08.10.1992 - TC 9206994
7304.31.00 SEAMLESS STEEL TUBE, ASTM A210 GR, comprising ALL of the following:
(a) outside diameter NOT less than 38 mm;
(c) wall NOT less than 2.6 mm;
(d) length NOT less than 6 m and NOT greater than 8.3 m
Op. 06.04.2004 Dec. 02.07.2004 - TC 0403598
7304.39 TUBES (NOT being honed tubes), seamless, having BOTH of the
following:
(a) elevated temperature properties conforming to
Specification BS 3602 (1978) Grade 360 or AS 1835 TS 5;
(b) OD NOT less than 1 250 mm OR a WT NOT exceeding 25 mm
Op. 21.03.1985 Dec. 21.03.1985 - TC 8530426
7304.39 TUBES OR HOLLOW BARS (NOT being honed tubes), in straight lengths,
ends plain, bevelled or threaded in accordance with ANY of the
following tube, hollow bar or Pipe Material Specification options:
(a) AS;
(b) ASME;
(c) ASTM;
(d) BS;
(e) DIN,
but without further rework, having a length NOT less than four
times the OD, as listed in THE TABLE
THE TABLE
Outside Diameter Wall Thickness
(a) NOT exceeding 219.08 mm 13.00 mm or greater but
NOT exceeding 25.00 mm;
(b) 219.08 mm or greater but 12.70 mm or greater but
NOT exceeding 254.00 mm NOT exceeding 50.80 mm;
(c) 254.00 mm or greater but 19.05 mm or greater but
NOT exceeding 323.85 mm NOT exceeding 41.00 mm;
(d) 323.85 mm or greater but 25.40 mm or greater but
NOT exceeding 720.73 mm NOT exceeding 75.00 mm
Op. 01.01.1988 Dec. 01.01.1988 - TC 8735571
7304.39.00 PIPES, seamless, non alloy carbon steel, circular cross section,
having an OD (outside diameter) less than 168.3 mm AND complying
with ANY of the following standards:
(a) American Society for Testing and Materials standard
ASTM A106/A106M-08;
(b) American Society for Testing and Materials standard
ASTM A53/A53M-07, Grade B;
(c) American Petroleum Institute standard API Specification 5L,
Grade X42
Op. 29.01.2010 Dec. 16.04.2010 - TC 1005214
7304.39.00 PIPES, STEEL, POWER STATION STEAM GENERATION BOILER, being ANY
of the following:
(a) main and/or auxilary steam pipes;
(b) hot reheat pipes;
(c) cold reheat pipes;
(d) main feed water pipes;
(e) super heater pipes
Op. 31.08.2007 Dec. 09.11.2007 - TC 0713866
7304.41 TUBES OR HOLLOW BARS (NOT being honed tubes), in straight lengths,
ends plain, bevelled or threaded in accordance with ANY of the
following tube, hollow bar or Pipe Material Specification options:
(a) AS;
(b) ASME;
(c) ASTM;
(d) BS;
(e) DIN,
but without further rework, having a length NOT less than four
times the OD, as listed in THE TABLE:
THE TABLE
Outside Dia Wall Thickness
(a) NOT exceeding 219.08 mm 13.00 mm or greater but
NOT exceeding 25.00 mm;
(b) 219.08 mm or greater but 12.70 mm or greater but
NOT exceeding 254.00 mm NOT exceeding 50.80 mm;
(c) 254.00 mm or greater but 19.05 mm or greater but
NOT exceeding 323.85 mm NOT exceeding 41.00 mm;
(d) 323.85 mm or greater but 25.40 mm or greater but
NOT exceeding 720.73 mm NOT exceeding 75.00 mm
Op. 01.01.1988 Dec. 01.01.1988 - TC 8735572
7304.41 TUBES, seamless, stainless steel, plain square cut ends, minimum
length 3 000 mm, to Specification ASTM A269, type 316L, having
SI. surface finished: O.D. - bright annealed;
I.D. - electro polished to RA.4um; or
SU. surface finish: O.D. - bright annealed;
I.D. - electro polished to RA.8um,
in the following sizes:
(a) 12.7 mm x 1.651 mm WT;
(b) 19.05 mm x 1.651 mm WT;
(c) 25.4 mm x 1.651 mm WT;
(d) 38.1 mm x 1.651 mm WT;
(e) 50.8 mm x 1.651 mm WT;
(f) 63.5 mm x 1.651 mm WT;
(g) 76.2 mm x 1.651 mm WT;
(h) 101.6 mm x 2.108 mm WT;
(i) 101.6 mm x 3.175 mm WT;
(j) 152.4 mm x 5.004 mm WT
Op. 07.10.1991 Dec. 19.02.1992 - TC 9108894
7304.41.00 TUBES, cold reduced, stainless steel, carbon content NOT exceeding
0.03%, to specifications ASTM A790, A789
Op. 16.07.1993 Dec. 01.11.1993 - TC 9306991
7304.49 TUBES OR HOLLOW BARS (NOT being honed tubes), in straight lengths,
ends plain, bevelled or threaded in accordance with ANY of the
following tube, hollow bar or Pipe Material Specification options:
(a) AS;
(b) ASME;
(c) ASTM;
(d) BS;
(e) DIN,
but without further rework, having a length NOT less than four
times the OD, as listed in THE TABLE:
THE TABLE
Outside Dia Wall Thickness
(a) NOT exceeding 219.08 mm 13.00 mm or greater but
NOT exceeding 25.00 mm;
(b) 219.08 mm or greater but 12.70 mm or greater but
NOT exceeding 254.00 mm NOT exceeding 50.80 mm;
(c) 254.00 mm or greater but 19.05 mm or greater but
NOT exceeding 323.85 mm NOT exceeding 41.00 mm;
(d) 323.85 mm or greater but 25.40 mm or greater but
NOT exceeding 720.73 mm NOT exceeding 75.00 mm
Op. 01.01.1988 Dec. 01.01.1988 - TC 8735573
7304.49.00 HOLLOW BARS, stainless steel, grade 316L or 304L, wrought and fully
annealed, in ANY of the following sizes:
7304.51.00 TUBES, seamless alloy steel, cold drawn, compliant with American
Society for Testing and Materials Standard A519/4130 (ASTM
A519/4130)
Op. 29.02.2008 Dec. 16.05.2008 - TC 0803409
7304.59.00 PIPES, STEAM, seamless alloy steel, hot finished, complying with
American Society for Testing and Materials ASTM A 335/A 335M
Grade P11 and American Society of Mechanical Engineers ASME SA-
335/SA-335M, in the following types or sizes:
(a) 500 mm NB Schedule 60 (508.0 mm OD and 20.6 mm WT);
(b) 500 mm NB Schedule 120 (508.0 mm OD and 38.1 mm WT);
(c) 300 mm NB Schedule 60 (323.8 mm OD and 14.3 mm WT);
(d) 250 mm NB Schedule 60 (273.0 mm OD and 12.7 mm WT);
(e) 200 mm NB Schedule 100 (219.1 mm OD and 15.1 mm WT);
(f) 200 mm NB Schedule 60 (219.1 mm OD and 10.3 mm WT);
(g) 150 mm NB Schedule 80 (168.3 mm OD and 11.0 mm WT);
(h) 100 mm NB Schedule 80 (114.3 mm OD and 8.6 mm WT);
(i) 50 mm NB Schedule 80 (60.3 mm OD and 5.5 mm WT);
(j) 25 mm NB Schedule 80 (33.4 mm OD and 4.5 mm WT);
(k) 15 mm NB Double Extra Strong XXS(21.3 mm OD and 7.5 mm WT);
(l) 15 mm NB Schedule 160 (21.3 mm OD and 4.8 mm WT)
For the purposes of this Order, tolerances allowable on the
nominal bore (NB), outer diameter (OD) and wall thickness (WT)
are + or - 2%
Op. 28.07.2009 Dec. 16.10.2009 - TC 0927071
7304.59.00 PIPE AND PIPE FABRICATIONS, alloy steel, with or without clamps
AND/OR fittings AND/OR expansion joints, complying with American
Society for Testing and Materials specification A335 Grade P91
(ASTM A335 grade P91), having ALL of the following:
(a) NOT less than 8% chromium;
(b) NOT less than 0.7% molybdenum;
(c) NOT less than 0.18% vanadium
Op. 24.12.2008 Dec. 20.03.2009 - TC 0845335
7304.59.00 PIPE, alloy steel, complying to American Society for Testing and
Materials specification A335 Grade P91 (ASTM A335 grade P91),
having ALL of the following:
(a) NOT less than 8% chromium;
(b) NOT less than 0.7% molybdenum;
(c) NOT less than 0.18% vanadium
Op. 24.12.2008 Dec. 20.03.2009 - TC 0845156
7304.59.00 PIPES, STEEL, POWER STATION STEAM GENERATION BOILER, being ANY
of the following:
(a) main steam pipes;
(b) hot reheat pipes;
(c) cold reheat pipes;
(d) main feed water pipes
Op. 28.12.2007 Dec. 24.05.2008 - TC 0800039
7304.59.00 TUBES OR PIPES, seamless alloy steel, hot finished, to ASTM A519
Grade 4140
Op. 08.01.1998 Dec. 13.03.1998 - TC 9800163
7304.59.00 TUBES OR HOLLOW BARS, seamless, alloy steel, hot finished OR hot
rolled, in straight lengths
Op. 09.11.2004 Dec. 21.01.2005 - TC 0411761
7305.11.00 LINE PIPE, submerged arc welded, complying with ISO 3183-3,
Grade L450, having BOTH of the following:
(a) outside diameter greater than 1 400 mm;
(b) wall thickness greater than 29 mm but NOT greater than 31
mm
Op. 17.06.2005 Dec. 09.09.2005 - TC 0507512
7305.11.00 PIPE, SUBMERGED ARC WELDED (SAW), having EITHER of the following:
(a) outside diameter NOT less than 750 mm;
(b) wall thickness NOT less than 9.53 mm
Op. 27.08.2008 Dec. 09.02.2009 - TC 0828344
7305.12.00 LINE PIPE, OIL AND GAS PIPELINE, steel, having BOTH of the
following:
(a) diameter NOT less than 645 mm;
(b) longitudinally welded
Op. 23.04.2007 Dec. 16.07.2007 - TC 0705875
7305.12.00 LINE PIPE, OIL AND GAS, stainless steel, welded, having an
external diameter NOT less than 406.4 mm
Op. 31.07.2008 Dec. 24.10.2008 - TC 0824211
7305.12.00 PIPE, to specification API 5L Grade B, ASTM 53B, being EITHER of the
following sizes (+/- 10%):
(a) OD 762 mm, WT 9.5 mm;
(b) OD 760 mm, WT 9.5 mm
Op. 17.06.2004 Dec. 03.09.2004 - TC 0405928
7305.31.00 WELD TEST RINGS, complying with Offshore Standard for Submarine
Pipeline Systems DNV-OS-F101
Op. 08.12.2005 Dec. 08.03.2006 - TC 0604839
7306.19.00 TUBES OR HOLLOW BARS (NOT being honed tubes), in straight lengths,
ends plain, bevelled or threaded in accordance with ANY of the
following tube, hollow bar or Pipe Material Specification options:
(a) AS;
(b) ASME;
(c) ASTM;
(d) BS;
(e) DIN,
but without further rework, having a length NOT less than four
times the OD, as listed in THE TABLE:
THE TABLE
Outside Dia Wall Thickness
(a) NOT exceeding 219.08 mm 13.00 mm or greater but
NOT exceeding 25.00 mm;
(b) 219.08 mm or greater but 12.70 mm or greater but
NOT exceeding 254.00 mm NOT exceeding 50.80 mm;
(c) 254.00 mm or greater but 19.05 mm or greater but
NOT exceeding 323.85 mm NOT exceeding 41.00 mm;
(d) 323.85 mm or greater but 25.40 mm or greater but
NOT exceeding 720.73 mm NOT exceeding 75.00 mm
Op. 01.01.2007 Dec. 09.11.2006 - TC 0614214
7306.19.00 PIPE, to specification API 5L Grade B, ASTM 53B, being ANY of the
following sizes (+/- 10%):
(a) OD 114.3 mm, WT 6.0 mm;
(b) OD 88.9 mm, WT 5.5 mm;
(c) OD 60.3 mm, WT 3.9 mm
Op. 01.01.2007 Dec. 09.11.2006 - TC 0614217
7306.19.00 TUBES OR PIPES, ERW, bevelled ends, certified to ALL the following
specifications:
(a) AS 1163;
(b) API 5L grades B and X42;
(c) ASTM A53 grade B;
in ANY of the following sizes:
Cross Section Diameter Wall Thickness Length
NOT less than 88.5 mm and NOT less than 4 mm and NOT less than
NOT greater than 90 mm NOT greater than 10 mm 6 m
NOT less than 114 mm and NOT less than 4 mm and NOT less than
NOT greater than 115 mm NOT greater than 10 mm 6 m
NOT less than 141 mm and NOT less than 4 mm and NOT less than
NOT greater than 142 mm NOT greater than 10 mm 6 m
Op. 06.11.2003 Dec. 23.10.2008 - TC 0835803
7306.30 TUBES, ERW boiler, being EITHER carbon or carbon manganese steel,
in straight lengths, ends plain, bevelled or threaded, BUT without
further rework, to specification ASTM A178/A 178M-89
Op. 10.02.1992 Dec. 16.07.1992 - TC 9201983
7306.30 TUBES, cold drawn, welded, to ANY of the following steel grades:
(a) K1006;
(b) K1016;
(c) K1010;
(d) K1020;
(e) K1026,
or ANY of the following tube specifications:
(a) JIS G3445 STKM 11-20;
(b) BS6323:Part 6:1982;
(c) ASTM A513,
and having BOTH of the following:
(a) carbon content NOT less than 0.06% and NOT greater than 0.4%
by weight;
(b) OD NOT less than 6.4 mm and NOT greater than 203.2 mm
Op. 27.07.1992 Dec. 08.10.1992 - TC 9206993
7306.30.00 TUBES, cold drawn, welded, to JIS G3473 STC 590A E-C stress
relieved
Op. 10.10.2005 Dec. 03.01.2006 - TC 0514065
7306.30.00 TUBES, cold drawn, welded to specification DIN 2393, having BOTH of
the following:
(a) carbon content NOT less than 0.06% and NOT greater than 0.4%
by weight;
(b) outside diameter NOT less than 6.4 mm and NOT greater than
203.2 mm
Op. 28.06.1995 Dec. 29.09.1995 - TC 9508551
7306.30.00 TUBES, WELDED, non alloy steel, being EITHER of the following:
(a) single wall resistance welded to specification SAE J526,
having ALL of the following:
(i) carbon content NOT greater than 0.13%;
(ii) outside diameter NOT greater than 11.50 mm;
(iii) wall thickness NOT less than 0.5 mm and NOT greater
than 1.0 mm;
(b) double wall copper brazed to specification SAE J527,
having ALL of the following:
(i) carbon content NOT greater than 0.13%;
(ii) outside diameter NOT greater than 13 mm;
(iii) wall thickness NOT less than 0.5 mm and NOT greater
than 1.0 mm
Op. 31.03.2003 Dec. 27.06.2003 - TC 0303383
7306.50 TUBES, ERW steel, aluminium killed, having BOTH of the following:
(a) OD exceeding 103 mm;
(b) WT 2 mm or less
Op. 28.02.1984 Dec. 28.02.1984 - TC 8341256
7306.50.00 TUBES, ERW, aluminized, type JIS G3445, having ALL of the following:
(a) 12.7 mm OD;
(b) 1.6 mm WT;
(c) 5 700 mm mill length
Op. 14.04.1994 Dec. 29.07.1994 - TC 9404172
7306.61.00 TUBES, square, stainless steel, NOT less than 100 mm x 100 mm across
the flat dimension
Op. 01.01.2007 Dec. 09.11.2006 - TC 0614223
7306.61.00 TUBES, cold drawn, carbon steel, hollow frame profile, having
ANY of the following sectional dimensions:
Length Width Wall Thickness
(a) 90 mm 41 mm 2.0 mm;
(b) 104 mm 43 mm 2.5 mm;
(c) 104 mm 43 mm 3.0 mm
Op. 01.01.2007 Dec. 08.05.2007 - TC 0705890
7306.69.00 TUBES, cold drawn, carbon steel, hollow frame profile, having
ANY of the following sectional dimensions:
Length Width Wall Thickness
(a) 90 mm 41 mm 2.0 mm;
(b) 104 mm 43 mm 2.5 mm;
(c) 104 mm 43 mm 3.0 mm
Op. 01.01.2007 Dec. 08.05.2007 - TC 0705891
7307.19.00 PIPE FITTINGS, POTABLE WATER AND GAS LINES, being EITHER of the
FOLLOWING:
(a) malleable cast iron couplings, incorporating a rubber seal
and washer
(b) tapped OR non tapped plugs incorporating a rubber seal
Op. 23.05.1996 Dec. 06.09.1996 - TC 9607790
7307.29.00 FITTINGS, PIPE AND TUBE, Grade 316L stainless steel, push fit,
with or without seal, being ANY of the following:
(a) pipe incorporating a socket;
(b) bends;
(c) pipe, having NOT less than 45 degree junctions and NOT
greater than 90 degree junctions;
(d) double sockets;
(e) "P" traps;
(f) bottle trap;
(g) eccentric increasers;
(h) eccentric reducers;
(i) access bends;
(j) threaded adaptor
Op. 25.02.2010 Dec. 14.05.2010 - TC 1009883
7307.29.00 FITTINGS, PIPE AND TUBE, stainless steel, being ANY of the
following:
(a) sealing rings;
(b) bodies;
(c) cap nuts;
(d) weld cones;
(e) flare adaptors
Op. 11.03.2009 Dec. 06.11.2009 - TC 0941426
7307.91.00 FLANGES, DOWNTAKE PIPE, WALKING BEAM FURNACE, being ANY of the
following:
(a) DN 200;
(b) DN 300;
(c) DN 350;
(d) DN 400
Op. 25.11.2005 Dec. 13.02.2006 - TC 0516608
7307.92.00 FITTINGS AND ADAPTORS, PIPE OR TUBE OR HOSE, carbon steel, with
or without seal, being ANY of the following:
(a) elbows, 90 degrees;
(b) elbows, 45 degrees;
(c) elbows, 3 way tees, being either male to female OR
combinations of both;
(d) tube sleeves;
(e) bends, 90 degrees;
(f) bends, 45 degrees
Op. 03.12.2008 Dec. 27.02.2009 - TC 0842548
7307.92.00 FITTINGS, PIPE AND TUBE, including sealing rings, bodies, nuts and
weld cones, having BOTH of the following:
(a) compliance with pressure rating of either LL, L or S to
DIN 2353;
(b) interchangeability of the whole or any component of the
fitting with other fittings or components which comply with
the dimensional specifications set out in DIN 2353,
but NOT including ANY of the following:
(a) stainless steel fittings;
(b) twin ferrule fittings
Op. 03.11.1995 Dec. 09.02.1996 - TC 9511750
7307.93.00 FITTINGS, PIPE AND/OR TUBE, butt weld, alloy steel, being end
caps
Op. 28.07.2009 Dec. 09.10.2009 - TC 0927136
7307.99 UNIONS, hammer, being four lug wing nut type with replaceable
rubber seal, having ANY of the following nominal connecting pipe
sizes on slipfit female pipe end and in Schedule 80 buttweld, male
component weld end:
Nominal connecting Nominal size
pipe size (female end) pipe (weld end)
Outside Dia Outside Dia
(a) 114.3 mm 152.4 mm;
(b) 168.28 mm 203.2 mm;
(c) 219.08 mm 254.0 mm;
(d) 273.05 mm 304.8 mm;
(e) 323.85 mm 355.6 mm;
(f) 355.6 mm 406.4 mm;
(g) 406.4 mm 457.2 mm
Op. 21.04.1987 Dec. 27.08.1987 - TC 8733860
7307.99.00 FITTINGS AND ADAPTORS, PIPE OR TUBE OR HOSE, carbon steel, with
or without seal, being ANY of the following:
(a) reducing or enlarging bush, hexagon;
(b) caps, solid or swivel;
(c) crosses;
(d) nipples, being ANY of the following:
(i) hexagon;
(ii) barrel;
(iii) plain;
(iv) reducing;
(e) sockets, including reducing and enlarging;
(f) plugs, square head or hex head or internal or external
hexagon;
(g) unions;
(h) tube welds or weld-on's;
(i) tube compression and tube flared fittings
Op. 03.12.2008 Dec. 27.02.2009 - TC 0842546
7307.99.00 FITTINGS, pipe and tube, metric, including sealing rings, bodies and
nuts, to specifications DIN 2353 or DIN 3859 in ANY of the
following sizes:
(a) 4 mm;
(b) 6 mm;
(c) 8 mm;
(d) 10 mm;
(e) 12 mm;
(f) 14 mm;
(g) 15 mm;
(h) 16 mm;
(i) 18 mm;
(j) 20 mm;
(k) 22 mm;
(l) 25 mm;
(m) 28 mm;
(n) 30 mm;
(o) 35 mm;
(p) 38 mm;
(q) 42 mm;
(r) 50 mm
Op. 02.12.1993 Dec. 11.04.1994 - TC 9400309
7307.99.00 FITTINGS, pipe, high pressure, steel, complying with ALL the
following standards:
(a) ASTM A105;
(b) ANSI B16.11;
(c) BS3799
Op. 27.04.1994 Dec. 29.07.1994 - TC 9404403
7307.99.00 BRANCH CONNECTIONS, weld on type, complying with ALL the following
standards:
(a) ASTM A105;
(b) ANSI B31-1 1980;
(c) ANSI B16-9;
(d) BS3351 1971
Op. 27.04.1994 Dec. 05.08.1994 - TC 9404404
7307.99.00 FITTINGS, pipe and tube, including sealing rings, bodies, nuts and
weld cones, having BOTH of the following:
(a) compliance with pressure rating being either LL, L or S to
DIN 2353;
(b) interchangeability of the whole or any component of the
fitting with other fittings or components which comply with
the dimensional specifications set out in DIN 2353,
but NOT including ANY of the following:
(a) stainless steel fittings;
(b) twin ferrule fittings
Op. 25.11.1994 Dec. 14.03.1995 - TC 9409468
7308.40.00 PROPS, HOT DIPPED GALVANISED AND/OR ZINC PLATED, having a rolled
thread on the outer tube
Op. 13.11.2007 Dec. 29.01.2008 - TC 0719361
7308.90.00 GUIDE RAILS, LIFT, hot rolled, bright drawn and planed
Op. 22.02.2001 Dec. 04.05.2001 - TC 0101755