Professional Documents
Culture Documents
Prepared by: -
Mr. Sanjeev K Sharma
Staff ID-00702301
Dept. GSRC India
Sympto
ms
In country X, City Y, Customer complaint about Capacity issue and low HSUPA
throughput
during Special events. Complaint area is hot spot and mostly special event happened there.
Alarm
Cause
1. Analysis
Congestion KPIs analysis:- From the KPI can see many code cong and DL Power cong.
Current
setting
Network
recommended
value
Current
setting
Network
recommended
value
Current
setting
I-Site location
From the above test result, RSCP and ECNO are quite good at the complaint location. We notice
that there is not any coverage problem. Only problem of high traffic during the special event that’s
why get customer complaint.
Handling
1. Handling
Parameter optimization
Process
Purpose to implement below action to reduce DL power congestion and code congestion:
1- Purpose to change PCPICH power and Maxtxpower setting on site NTB6709 as below:
90 90 85 92 95
Current Recommend
Command Parameter
Value Value
MOD
AICHPowerOffset -6 -9
UAICHPWROFFSET
MOD
PICHPowerOffset -7 -10
UPICHPWROFFSET
DLLDRTRIGTHD DLLDRRELTHD
current value 70 60
recommend value 60 50
7- 1B event threshold changing to make UE leave active set easier and reduce SHO
overhead.
Result
recommend value -10 -10 -10
Parameter
changing mml.txt
VS.CS.AMR.Call.Drop.Cell.Rate(%)
VS.PS.Call.Drop.Cell.Rate(%)
VS.RRC.Rej.Sum
VS.RAB.FailEstabCS.Cong
VS.RAB.FailEstabPS.Cong
ForSugges
such kind of issue, you can have try by changing the suggested
tion
parameter.