Professional Documents
Culture Documents
Resume
Resume
Resume
Abstrak
Kata Kunci :
Abstract
Conventional identification techniques to identify a person's identity using a password or a card
previously. At present the use of conventional identification techniques increasingly replaced by
biometric identification techniques. biometrics is a distinctive identity that is owned personally
and has a unique or special characteristics. Biometric characteristic can be used as a pointer of
one's identity, especially the face. This final project combines conventional identification
technique (password) and apply a method for recognizing an image so it can be properly
identified by the computer by using the theory of Proccessing Image created as a system
identification software and hardware that is safe to receive the output of an electronic
identification system and translates as access to open and lock the safe door. Retrieval of data
input in the form of image files captured by webcams, which will be done in the PC image
processing pattern recognition to the face. Then after that the patterns are identified and then
stored into the database as a reference. The results of the implementation using the method of
Principal Component Analysis as a method of face recognition for access control safes this final
project was carried out testing of TestDatabase TrainDatabase from a face image, the best
accuracy on face recognition system with PCA is on the face with a Webcam Database and 20W
lamps with accuracy of 100%. While the accuracy is less good in the face with a Webcam Database
with an accuracy of 70%. The fastest computing time in the face with a facial recognition
database Webcam trained with 10 images faster is the average computation time is 4.3 seconds
and the opposite face with a facial recognition database Webcam trained with 50 images with a
slower average computational time is 7.2 seconds. This is because it is influenced by many facial
training goals.
Keywords : Face Recognition, Principal Component Analysis, Webcam, Grayscale. atmega 8535.
BAB I
PENDAHULUAN
Bab I Pendahuluan 2
Bab I Pendahuluan 3
4. Untuk database wajah tambahan dari AT&T dengan format BMP dengan
ukuran 92x112 piksel.
5. TrainDatabase wajah berjumlah 34 sampel wajah.
6. Untuk pengambilan wajah, pada matlab tampilan webcam dibuat suatu kotak
segi empat untuk nantinya wajah yang akan di ambil.
7. software simulasi yang digunakan adalah Matlab versi R2009a dan untuk
software memprogram mikrokontroler adalah code vision AVR.
8. Mikrokontroler AVR dan driver motor dc pada hardware yang di gunakan
berupa kit pcb siap pakai.
9. Brankas yang digunakan dibuat dari bahan kayu.
2. Pengumpulan Data
Bertujuan untuk mendapatkan data inputan berupa citra wajah.
3. Tahap Perancangan
Membuat perancangan sistem yang bisa digunakan sebagai alat bantu agar
bisa mengenali wajah, disimpan dan dikenali lagi .
Bab I Pendahuluan 4
BAB I PENDAHULUAN
Bab ini berisi tentang latar belakang permasalahan, tujuan penelitian,
perumusan masalah, batasan masalah, metode penelitian, dan
sistematika penulisan.
Bab I Pendahuluan 5
BAB V PENUTUP
Bab ini berisi kesimpulan hasil yang diperoleh dari analisis sistem serta
saran-saran untuk pengembangan Tugas Akhir ini.
BAB V
KESIMPULAN DAN SARAN
5.1 Kesimpulan
55
5.2 Saran
Pengembangan yang dapat dilakukan dari Tugas Akhir ini adalah sebagai
berikut :
Sistem Klasifikasi Jenis dan Kematangan Buah Tomat Berdasarkan Bentuk dan Ukuran
serta Warna Permukaan Kulit Buah Berbasis Pengolahan Citra Digital
DAFTAR PUSTAKA
xv