Professional Documents
Culture Documents
NSK CAT E1102m A16-17 PDF
NSK CAT E1102m A16-17 PDF
Determination of
internal clearance
A Operating conditions and required Examination of special
performance specifications
Study of cage Page number
A Environmental conditions A Speed A Operating temperature A57
A Dimensions of shaft and housing A Noise
A Operating temperature
A Environment (seawater,
A External vibration and shock
vacuum, gases, chemicals,
Page number A Rapid acceleration and
etc.)
Evaluation of A Allowable space A18, A38 A Type of lubrication
bearing types Magnitude and direction of loads deceleration
A A18 A Moment load and misalignment
A Vibration and shock A18
A Operating speed, maximum speed A18, A37 Selection of special
A Misalignment of inner and outer A18 material, heat treatment
Selection of cage type
rings for dimensional stability
A Fixing in axial direction and mounting
and material
A20 to A23
arrangement
A Ease of bearing mounting and A19 Page number
dismounting Examination of A Operating temperature range A106, A107, A110, A112
A Sound and torque A19 lubricating A Speed A37
A Required rigidity A19, A96 methods A Lubricating methods A105
A Availability and cost A Type of seals A102
A Maintenance and inspection A123
intervals
Determination of bearing
type and mounting Selection of lubricating
arrangement method, lubricant, and
type of seals
Page number Page number
Determination of A Expected life of machine A24, A25 Examination of A Procedure for mounting and A116, A121
bearing size A Dynamic and static equivalent loads A30, A32 ease of mounting/ dismounting
A Speed -- dismounting A Necessary equipment A116, A121
A Permissible static load factor A32 A Dimensions affecting A100
A Permissible axial loads (in the case of A33 mounting
cylindrical roller bearings)
Determination of dimensions
affecting mounting and
Determination of bearing size
procedure for mounting/
dismounting
Fig. 2.1 Flow Chart for Selection of Rolling Bearings Final specifications for
bearing and surrounding
parts
A 16 A 17