Professional Documents
Culture Documents
Select the Power vector instrument from the menu or using the mouse. Set the amplitude
percentage to 80.
Connect the load resistors in series and investigate the effect on the power vectors.
Change the wiring of the experiment as follows:
Experiment with a simple rectifier
The Timing diagram instrument allows measurement of four different variables. Such a
measurement is performed in two steps.
Select the Timing diagram instrument from the View menu or by using the mouse. Set the
percentage amplitude (Amplitude/%) to 80.
input
Output
Input
Output
Experiment on circuit response when supply voltage and load are altered
Carry out a measurement varying the input voltage V2 (%) between 65%
Response to halving the load:
Load = 2 * R
No load:
Frequency spectrum for a simple rectifier
Input
Output
Response to halving the load
Input
Output
Response of input and output voltage
Response to halving the load:
Load = 2 *R:
No load:
Frequency spectrum of a power factor correction circuit
Input
40Hz