Professional Documents
Culture Documents
Siemens S7 1200 Ethernet PDF
Siemens S7 1200 Ethernet PDF
HMI Setting:
Parameters Recommended Options Notes
PLC type Siemens S7-1200 (Ethernet)
PLC I/F Ethernet
Port no. 102
PLC sta. no. 2
Rack 0
CPU slot 1
PLC Setting:
1. In S7-1200 program software create PLC program and tag and then download to
PLC.
2. Select Go offline, EasyBuilder will connect to PLC and get tag data. In PLC type
select “SIEMENS S7-1200 (Ethernet)”.
PLC Connection Guide
3. Click “Settings…”, input PLC IP address.
4. Check the PLC that is not connected to any PC. Click “Get tag info…”.
5. Supported by firmware V3.X and previous versions. For V4.0 or later, please see How
to Connect With S7-1200 Firmware V4.0)
PLC Connection Guide
6. If the software used is a version later than TIA Portal V11,SP2, a dialog of
FunctionBlock directory will be shown, users have to define the mapping from FB to
DB in this directory then click “Check OK”. The tag information will be gained and
a successful message is shown.
PLC Connection Guide
7. When opening an existing project and get the tag information again, if the PLC
software used is TIA Portal V12 and later versions, the DB name must be entered
again in order to compile the project.
8. Added Tag Manager that allows selecting the Siemens S7-1200 PLC tags to be
imported.
PLC Connection Guide
9. Create an object and click read address “Setting…”
Select [Protection], and then select [Permit access with PUT/GET communication
from remote partner (PLC,HMI,OPC,…].
The following part introduces how to export S7-1200 PLC Tags and Program Blocks.
PLC Connection Guide
Exporting PLC Tags (I,Q,M tags)
1. Under [PLC tags] select [Show all tags].
3. Browse for the directory to save the exported file and then click [OK].
PLC Connection Guide
Exporting Program Blocks(DB)
1. When the database contains Struct data type, please note the following restrictions.
Please at least add one data member that doesn’t belong to Struct data type into DB,
otherwise, the data cannot be imported to EasyBuilder.
Multidimensional Arrays and Multilayer Structs are not supported.
After building DB, please do the following actions for Struct address:
(1) Copy the complete Struct data.
(2) Delete data.
(3) Add a new row.
(4) Paste data.
2. Right click on DB, click [Generate source from blocks], and then enter the file name
to save.
PLC Connection Guide
After building and importing PLC Tags and Program Blocks, click [Download to device].
4. The “Import status” field will display the result, click [OK].
PLC Connection Guide
5. Select the tags to be imported and then click [OK].
Bool bit
16-bit BCD, Hex, Binary,
Byte 8-bit
Unsigned
16-bit BCD, Hex, Binary,
SInt 8-bit
Signed
16-bit BCD, Hex, Binary,
USInt 8-bit
Unsigned
16-bit BCD, Hex, Binary,
Word 16-bit
Unsigned
16-bit BCD, Hex, Binary, 16-bit
Int Signed
16-bit BCD, Hex, Binary, 16-bit
UInt Unsigned
32-bit BCD, Hex, Binary,
DWord 32-bit
Unsigned
32-bit BCD, Hex, Binary,
DInt 32-bit
Signed
Real 32-bit Float 32-bit
32-bit BCD, Hex, Binary,
UDInt 32-bit
Unsigned
Array Word array for ASCII input Length=word
and ASCII display
16-bit BCD, Hex, Binary,
Char USInt
Unsigned
CREF Struct
16-bit BCD, Hex, Binary,
Date UInt
Unsigned
DTL Struct
ErrorStruct Struct
IEC_COUNTER Struct
IEC_DCOUNTER Struct
IEC_SCOUNTER Struct
IEC_TIMER Struct
IEC_UCOUNTER Struct
IEC_UDCOUNTER Struct
PLC Connection Guide
IEC_USCOUNTER Struct
NREF Struct
32-bit BCD, Hex, Binary,
Time DWord
Unsigned
32-bit BCD, Hex, Binary,
Time_Of_Day DWord
Unsigned
Bool, Byte, SINT, USInt, Word,
Struct Int, UInt, DWord, Dint, Real,
UDInt
Wiring Diagram:
Direct connect (crossover cable):
HMI RJ45 Male Wire Color PLC RJ45 Male
1 TX+ White/Orange 3 RX+
2 TX- Orange 6 RX-
3 RX+ White/Green 1 TX+
4 BD4+ Blue 4 BD4+
5 BD4- White/Blue 5 BD4-
6 RX- Green 2 TX-
7 BD3+ White/Brown 7 BD3+
8 BD3- Brown 8 BD3-
PLC Connection Guide
Through a hub:
HMI RJ45 Male Wire Color PLC RJ45 Male
1 TX+ White/Orange 1 TX+
2 TX- Orange 2 TX-
3 RX+ White/Green 3 RX+
4 BD4+ Blue 4 BD4+
5 BD4- White/Blue 5 BD4-
6 RX- Green 6 RX-
7 BD3+ White/Brown 7 BD3+
8 BD3- Brown 8 BD3-
Driver Version:
Version Date Description
V1.70 Oct/7/2011 Add data type: Byte,SInt,UInt,UDInt
V1.90 Apr/26/2012 Add data type: USInt
V2.40 Aug/04/2014 Support firmware V4.0
V2.50 Aug/29/2014 Support cMT-SVR