Professional Documents
Culture Documents
One-Stop Shop
• Flammable (catalytic or infrared), toxic
The Sensepoint XCD range provides
and oxygen versions available
• New and retrofit applications
comprehensive monitoring of flammable,
• Suitable for indoor or outdoor use
• Stainless steel or aluminium toxic and Oxygen gas hazards in potentially
explosion-proof housing options
• IP66 as standard explosive atmospheres, both indoors and
Proven and Reliable outdoors. Users can modify detector
Sensor Technology
•
•
SurecellTM electrochemical sensors
Poison immune infrared sensors
operation using the LCD and magnet
•
•
Poison resistant catalytic bead sensors
Long life sensors
switches without ever needing to open the
Global Approvals unit. This enables one-man, non-intrusive
• US and Latin America, European,
Canadian and Asian operation and reduces routine maintenance
• Compliant with UL, INMETRO, ATEX,
IECEx, CSA, KTL, PA, GB and CCCF time and costs.
standards
A tri-colour backlit LCD clearly indicates the Sensepoint XCD has an integral mounting plate
Easy to Use unit’s status at a glance, even from a distance. for surface mounting or can be mounted to a
• User friendly and intuitive tri-colour A steady green backlight indicates normal horizontal or vertical pipe using the optional
backlit display with digits, bar graph operation, flashing yellow indicates fault and pipe mounting bracket. Electrical installation
and icons flashing red indicates an alarm. can be made using either conduit or cable
• Fully configurable via magnetic switches with suitable mechanical protection. Two M20
• Optional remote sensor mounting* All detectors are supplied pre-configured or ¾”NPT entries are provided (depending
• Selectable sink or source 4-20mA output and include 2 programmable alarm relays, on certification). A weatherproof cap is also
• Auto-inhibit during maintenance 1 programmable fault relay as well as an included for use in the harshest outdoor
• MODBUS communications for remote industry standard 4-20mA output (sink or conditions. Other optional accessories include
diagnostics/configuration* source selectable) and MODBUS*. a sunshade/deluge protection, duct mounting
The scale, range, relay operation, alarm set kit, collecting cone and remote mounting
Cost Effective sensor socket*.
• Common transmitter platform point and electronic tag number of the detector
• Minimal training required can be adjusted using the transmitter's LCD Sensepoint XCD ensures easy installation
• Reduced spares and non-intrusive magnetic switches. Outputs and the fastest routine operation by removing
• Non-intrusive, one-man operation are automatically inhibited during adjustment, the need for hot work permits in hazardous
• Plug-in sensor replacement thereby reducing the risk of false alarm at the areas. Using easy to replace plug-in sensors,
• MODBUS multi drop option offers control panel during maintenance. downtime is also reduced and on-going costs
cabling savings* are minimised through the use of poison
resistant flammable sensors, poison immune
Simple Installation infrared Hydrocarbon sensors and patented
• Plug-in display module removes to give access Surecell™ toxic sensors.
to terminal area 8
• Integral mounting bracket 11
• 2 x M20 or ¾” NPT cable/conduit entries 5
4
(certification dependent)
• Removable plug/socket type terminal blocks for
ease of wiring
• Sink/source switch to suit preferred wiring 10
topology 3
Range of Optional Accessories 2
• Remote sensor mounting kit* 1
• Remote sensor gassing kit
• Duct mounting kit
• Calibration gas flow housing
• Collecting cone
1 Cover
* Contact Honeywell Analytics for availability of these options. 2 Display module
6 3 Terminal area
4 Blanking plug
5 Transmitter
Typical Applications • Refineries and chemical plants 6 Plug-in XCD sensor
• Industrial manufacturing facilities 7
• Onshore oil and gas terminals 7 Sensor retaining ring
• Power plants
• Production platforms 8 Integral mounting plate
• Waste water facilities
• Exploration and drilling 9 Weather protection assembly
• Utilities
• Food and beverage production 9 10 Cable/conduit entry (x2)
11 Certification label
Sensepoint XCD Overview
mV
for detection of Hydrocarbon gases in the Methane 20.0 to 100.0%LEL 100%LEL 10%LEL 50%LEL
Sensor Family
range 0-100%LEL and 0-100%Vol*, as well as Methane 20 to 100%Vol.* 100%Vol. 10%Vol. 50%Vol.
30 to 70% of selected
Carbon Dioxide (CO2) in the range 0-2%Vol. Carbon Dioxide 0.1 to 2%Vol. 2%Vol. 0.1%Vol. full scale range 1%Vol.
The EC type transmitter is for use with Electrochemical Sensors
the EC family of XCD sensors including Hydrogen Sulfide 10.0 to 100.0ppm 50.0ppm 0.1ppm 10ppm
EC
IR Methane %Vol*
EC H2S
EC CO
EC H2
EC O2
Technical Services
24/7 global network includes post-sales service
and Systems Integration teams
» Emergency call out, service contracts, on/
off-site repair, training and commissioning
» Complete range of spares, consumables
and accessories
HWA6181
H_XCD_DS01082_V1_US 5/09
© 2009 Honeywell Analytics