Professional Documents
Culture Documents
Ts/basics/water - HTML: Suggestions For Inceasing Efficiency of Gas Turbine
Ts/basics/water - HTML: Suggestions For Inceasing Efficiency of Gas Turbine
1. Water injection. Water injected into the combustion chamber decreases temperature
and pressure, and increases mass flow pas the turbine.
1. Regeneration. Waste exhaust heat is used to preheat compressor output. This does
not increase power but does increase efficiency. The more efficient the turbine the
less of an effect this has.
1. Cheng Cycle. HRSG creates steam from waste exhaust heat, and then injects that
steam into the combustors, reducing combustion temperature and increasing energy
flow through the turbine.