Professional Documents
Culture Documents
Indian Boiler Amendment Regulations 2015 PDF
Indian Boiler Amendment Regulations 2015 PDF
-33004/99
vlk/kj.k
EXTRAORDINARY
Hkkx II—[k.M 3—mi&[k.M (i)
PART II—Section 3—Sub-section (i)
izkf/dkj ls izdkf'kr
PUBLISHED BY AUTHORITY
la- 229] ubZ fnYyh] cq/okj] vçSy 15] 2015@pS=k 25] 1937
No. 229] NEW DELHI, WEDNESDAY, APRIL 15, 2015/CHAITRA 25, 1937
के ीय
( ीय बायलर बोड )
अिधसूचना
सा.
सा.का.
का.िन. 286(अ).—
िन. 286( कितपय ाप िविनयम भारतीय बायलर िविनयम, 1950 का और संशोधन करने के िलए, सा.का.िन
855 (अ) तारीख 1 दसबर, 2014 ारा उन सभी िय से, िजनके उससे भािवत होने क संभावना थी, उस तारीख से िजसको उस
राजप क ितयां, िजसम यह अिधसूचना अंतव है, उपल!ध करा दी गई थी, प#तािलस दन क अविध के भीतर आ'ेप और सुझाव
आमंित करते +ए कािशत कए गए थे;
और उ राजप क ितयां जनता को 23 दसबर, 2014 को उपल!ध करा दी गई थ1 ;
और 2तािवत ाप िनयम पर िविभ4 िय और पणधा6रय से िविन7द अविध के भीतर उ अिधसूचना म अंतव
संसोधन पर ा: सुझाव या आ'ेप पर सयः िवचार कया गया है ;
अतः अब, के <=ीय बायलर बोड?, बायलर अिधिनयम, 1923 (1923 का 5) क धारा 28 ारा द@ शिय का योग करते +ए,
भारतीय बायलर िविनयम, 1950 का और संशोधन करने के िलए िनAिलिखत िविनयम बनाता है, अथा?त:् -
1. संित नाम और ारंभ (1) इन िनयम का संि': नाम भारतीय बायलर (संशोधन) िविनयम, 2015 है ।
(ख) ये राजप म उनके काशन क तारीख को वृ@ हगे ।
2. भारतीय बायलर िविनयम, 1950 (िजसे इसम इसके पHचात् उJत िविनयम कहा गया है) के िविनयम 3क के पHचात्
िननिलिखत िविनयम अंत:स्थािपत कया जाएगा, अथा?त् :-
"3ख
"3ख. बायलर या बायलर संघटक क! छू ट -
उJत अिधिनयम क धारा 34 क उप-धारा (3) के उपबंध के अनुसार, कसी बायलर या बायलर संघटक को संपूण? राMय या
उसके कसी भाग म िननिलिखत शतN के अधीन रहते +ए अिधिनयम के सभी या क<ह1 उपबंध के चालन से छू ट दी जा सके गी:
(क) बायलर या बायलर संघटक का िडजाइन और संिनमा?ण अंतरा?PQीय संिहता या मानक िजसके अंतग?त िR6टश मानक
(बीएस), अमे6रकन सोसाइटी ऑफ मैकेिनकल इंिजिनयस? (एएसएमई) बायलर और ेसर वैसल कू ट, टूबुलर एJसचजर,
मै<यूफैJचरस?, एसोिसएशन (टीईएमए) तकनीक अपे'ाएं द2तावेज(टीआरडी), जीओएसटी और जापानी औVोिगक मानक
(जेआईएस ) के अनुसार है ;
(ख) संिनमा?ण म उपयोग क गई सामिWय को उJत िविनयम ारा िविशPटतया ितिषY नह1 कया गया है ;
(ग) बायलर या बायलर संघटक का िडजाइन, संिनमा?ण का राMय सरकार ारा अपेि'त परी'ण और जांच जैसे शेष
जीवन िनधा?रण, िजनको 2वामी ारा कया जाएगा, का समाधान कर िलया गया है ।"।
3. उJत िविनयम के , िविनयम 4 के 2थान पर िननिलिखत िविनयम रखा जाएगा, अथा?त् :-
"4. मानक अपेाएं- बायलर के संिनमा?ण म िननिलिखत अपे'ाZ का अनुपालन कया जाएगा, अथा?त् :-
(क) साम'ी
- बायलर के संिनमा?ण म उपयोग क गई सभी [लेट, 6र\वट और छड़ क जांच क जाएगी और वे इसम इसके
पHचात् अंतवPट िविनयम के अनुसार हगे ।
(ख) िविनमाण- (i) संिनमा?ण के दौरान सभी बायलर कसी स'म \यिJत के पय?वे'ण के अधीन हगे और प6रिशPट ञ म
िविहत संिनमा?ण का सभी aम पर िनरी'ण कया जाएगा । bूब और वाPप पाईप क भी प6रिशPट ञ म िविहत aम पर
िनमा?ता के संकम? म जांच क जाएगी और िनमा?ता ारा संचािलत परी'ण को स'म \यिJत ारा साि'त कया जाएगा ;
(ii) बायलर, बायलर संघटक, ईकोनोमाइजर, फड पाईप, वाPप-पाईप और सुपर तापक क वेcdडग क िनयोिजत
वेdडर के पास प 13 म माण प होगा ;
(II) ऐसे बायलर क दशा म िजसका के वल संयोजन साइट पर कया जाना है, िनरी'ण ािधकारी ारा पूण? प से संयोिजत
बायलर पर हाइeोिलक जांच लागू नह1 होगी परं तु ऐसे बायलर के \यिPटक भाग क हाइeोिलक प से जांच क गई है और जांच
ािधकारी ारा पृथक् प से मािणत कया गया है जैसा क इन िविनमय के अधीन यथा अपेि'त है ।
(III) वे2ट ताप बायलर क दशा म राMय के जांच अिधकारी ारा जहां बायलर ितPठािपत कया गया है, साइट पर संिनमा?ण के
पूरा होने के पHचात् यथा लागू प II(1) या प II(2) म \यिPटक संघटक के िलए 2वामी ारा िविहत प म आपूत कए गए
माण प के आधार पर िजनक िविनयम 4 के खंड (ग) के अधीन बायलर के रिज2Qीकरण के िलए 2तुत कया जाना अपेि'त है,
माण प जारी कया जाएगा, उसे उस राMय के जांच अिधकारी को जहां बायलर ितPठािपत है, ऐसे बायलर के साइट पर संिनमा?ण से
पूव? जांच अिधकारी को 2तुत कया जाएगा ।
.टप- यथाि2थित, प II(1) या प II(2) के 2थान पर जांच अिधकारी ारा उन बायलर के िलए िजनम सामWी, िडजाइन
ण
और संिनमा?ण िवशेषताZ के संबंध म मानक ि2थितय से िभ<नताZ को बोड? या जांच ािधकारी ारा िविनमय 3 के उप िविनयम (5)
या उप िविनयम ( 6) के अधीन अनुlात कया गया है, प II-ख म जांच ािधकारी ारा माण प दान कया जा सके गा ।
(ii) िविनमा?ता और परी'क का िनमा?ता ारा या बायलर के िनमा?ता के िजमेदार ितिनिध का प III म एक माण प
िजसम बायलर का िववरण उसक मुgय िवमाएं, उसके संिनमा?ण म उपयोग क गई सामWी क क2म, सभी [लेट क मोटाई, उसका
ास तथा शेdफ [लेट म 6रवट िछ= करने क िविध, शेdफ बनाने क साधारण पYित से कसी िभ<नता क िविशिPटयां जैसे क सोिलड
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 3
रोcलग या वेcdडग, बायलर पर क गई हाइeोिलक जांच, आशियत काय?शील दाब, तािपत सतह का 'े अिधकतम सतत् वाPपीकरण
'मता, िविनमा?ण का वष? और 2थान तथा बायलर क संकम? संgया का िववरण अंतवPट होगा ;
.टप
: जांच ािधकारी, तथािप माण प के एक उपांत6रत प का अनुमोदन कर सके गा िजसम उन मद को, जो कसी
ण
िविशPट बायलर से संबंिधत नह1 है, का लोप कया जा सके गा ।
(iii) (I) शाप म संयोिजत बायलर क दशा म, मुgय िवमाZ, सेJसन, िनमा?ता क संgया, जांच ािधकारी क मुहर क
ा:ि2थित, सामWी का बीजक, वेcdडग के !यौरे और िडजाइन पैरामीटर को दशा?ते +ए समुिचत 2के ल पर eाइ्ंग ।
(II) साइट पर संयोिजत बायलर क दशा म साधारण और दाब भाग क ि2थित को उपदशत करते +ए eाइंग, कुं डिलय क
eाइं ग, पैनल, तापक और मुgय िवमाZ के !यौर के साथ eम, वेcdडग !यौरे , सामिWय का बीजक, िडजाइन और चालन पैरामीटर को
उपदशत करते +ए eाइं ग । िविनमा?ता एक जैसे या समान ब+ उप संयोजन क दशा म eाइं ग के समुिचत 2के ल का उपयोग कर सके गा,
के वल एक उप संयोजन के िलए eाइं ग को 2तुत कया जा सके गा ।
(III) 6र!mड बायलर क दशा म लांगीbूnनल 6रc!टग और प6रधीय सीम के साथ िपच 6र!ट, 6र!ट पंिय क aास 2पेcसग और
6र!ट िछ= का ास, िड2ड एंड [लेट का कारवेचर, फdलट और hल#oस तथा ब#ट [लेट का कान?र तथा जंहा ग2सट 2टे को फट कया
जाता है pयेक ग2सट 2टे म 6र!ट िछ= क स्ंgया और ास ;
(iv) (I) इ2पात िनमा?ता से प IV म एक माण प और [लेट, 6र\वट या छड़ के िविनमा?ता से aमश: िविनमय 26 िविनयम
27 म िन7दPट कृ ित का माण प और [लेट, 6र\वट या छड़ के िविनमा?ता से माण प म भार सं., [लेट या छड़ संgया
और संgया तथा जांच क गई िविभ<न [लेट क िवमाएं, उनका रासायिनक िवHलेषण उनक सवा?िधक उनक अनुभाग के ित वग?
िमलीमीटर म ित कलोWाम त<य सुदढ़ृ ता कए गए मोड़ या अ<य परी'ण औार परी'ण क तारीख दशत हगे ।
(II) िनरी'ण ािधकारी ारा अनुमोदत काय?शील दाब के िलए बायलर क उपयुJतता क बाबत उसके रिज2Qीकरण क तारीख
से तीन वष? क अविध के भीतर, यद कोई Hन उrभूत होता है तो मुgय िनरी'ण ारा अनुरोध कए जाने पर 2वामी उJत खंड म
िविन7दPट मुgय द2तावेज को अिभा[त और 2तुत करे गा :
परं तु के <=ीय बायलर बोड? ारा मा<यता ा[त िवgयात इ2पात िनमा?ता ारा िविनयम 4क से िविनयम 4ज म अिधकिथत रीित म,
बनाए गए और जांच कए गए इ2पात क बाबत िवgयात इ2पात िनमा?ता का प 4 म माण प को िनरी'ण ािधकारी के माण प
के 2थान पर 2वीकार कया जाएगा :
परंतु यह और क के <=ीय बायलर बोड? ारा मा<यता ा[त िवgयात bूब/पाइप िनमा?ता ारा िविनयम 4क से िविनयम 4ज म
अिधकिथत रीित म, बनाए गए और जांच कए गए bूब या पाइप क बाबत िवgयात bूब/पाइप िनमा?ता का, यथाि2थित प 3क या
3ख म माण प 2वीकाय? होगा परंतु यह क प 4 म अपेि'त सभी सूचनाएं सार म 2तुत क जाए ।
(III) उस दशा म िवgयात इ2पात िनमा?ता से प IV मूल माणप 2तुत नह1 कया नह1 जा सकता है ऐसे माणप के कारण
िजसम अ<य योजन के िलए उपयोग क गई [लेट के !यौरे भी ह#, बॉयलर के नमाता ारा सयक् प से ह2ता'6रत और िनरी'ण
ािधकारी ारा ितह2ता'6रत मूल माणप का सार प IV म माणप के 2थान पर 2वीकाय? होगा । परं तु प IV म अपेि'त
सभी सूचना सार म 2तुत क जाएगी ।
(v) hयूजन वेdडर eम क दशा म वेdड क गई मरमत और ताप उपचार ताप चाट? का डायWाम भी 2तुत कया जाएगा और
इसके अित6रJत सेवा तापमान (0.2 ितशत ूफ दाब) के ईdड cबदू क बाबत माण प, 100,000 घंट म 1 ितशत का बढ़ाव उpप<न
करने के िलए औसत दाब (aप) सामWी म 100,000 घंट म दाब उpप<न करने के िलए <यूनतम, इनम से जो भी लागू हो 2तुत कया
जाएगा ।
(vi) आंत6रक दाब के अधीन bूब और पाइप के िलए, रासायिनक िवHलेषण, ऊPण ईdड cबदू, (0.2 ितशत दाब सबूत)
100,000 घंट म 1 ितशत का बढ़ाव उpप<न करने के िलए औसत दाब (aप) सामWी म 100,000 घंट म दाब उpप<न करने के िलए
<यूनतम, इनम से जो भी लागू हो 2तुत कया जाएगा :
.टप ण: जब तक राtीय धातु िवlान योगशाला या भारत हैवी इलैिJQJल िलिमटे ड, हैदराबाद क िनगम अनुसंधान और िवकास
योगशाला ारा 2वदेश म उpपादत िमuातु इ2पात के बढ़े +ए तापमान के डाटा का संWहण अमे6रकन सोसाइटी आफ मैकेिनकल
इं जीिनयस? (एएसएमई) या िR6टश 2ट#डस? (बीएस) या यूरोिपयन 2ट#डस? (ईएन) कोड के िवvY 33,000 घंटे का परी'ण करने तक,
इ2पात के इन Wेड को 2वीकार कया जा सके गा और दीघा?विध बढ़े +ए तापमान क िवशेषताZ/अिधकतम अनुlेय जो यथाि2थित
अमे6रकन सोसाइटी आफ मैकेिनकल इं जीिनयस? (एएसएमई) या िR6टश 2ट#डस? (बीएस) या यूरोिपयन 2ट#डस? (ईएन) कोड दए गए दाब
मूdय का उपयोग िडजाइन के योजन के िलए कया जा सके गा :
4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
परं तु यह क –
(I) इ2पात के उpपादक ारा इस भाव का एक माण प 2तुत कर दया गया है क इ2पात का िविनमा?ण कठोरता से
अमे6रकन सोसाइटी आफ मैकेिनकल इं जीिनयस? (एएसएमई) या िR6टश 2ट#डस? (बीएस) या यूरोिपयन 2ट#डस? (ईएन) संिहता क
अपे'ाZ के अनुसार कया गया है ताक aप र[चर अपे'ाZ का अनुपालन कया जा सके ।
(II) इ2पात िनमा?ता अपेि'त माण प 2तुत करता है क इ2पात रासायिनक िवHलेषण, क' और बढ़े +ए तापमान
क यांिक िवशेषताZ जैसाक यथाि2थित अमे6रकन सोसाइटी आफ मैकेिनकल इं जीिनयस? (एएसएमई) या िR6टश 2ट#डस?
(बीएस) या यूरोिपयन 2ट#डस? (ईएन) संिहता म दया गया है, के अनुप है ।
(III) 1000 घंट का लघु अविध दाब र[चर परी'ण जैसाक नीचे िववरण दया गया है, राPQीय धातु िवlान
योगशाला/इ2पात संयं ारा इस योजन के िलए कया जाता है क Jया इ2पात िविशि के अनुप है और यह सुिनHचय
करने के िलए कया जाता है क Jया इ2पात दीघा?विध दरार दाब मूdय/यथाि2थित, अमे6रकन सोसाइटी आफ मैकेिनकल
इं जीिनयस? (एएसएमई) या िR6टश 2ट#डस? (बीएस) या यूरोिपयन 2ट#डस? (ईएन) कोड म दए गए अिधकतम अनुlेय दाब मूdय
को पूरा करता है और राPQीय धातु िवlान योगशाला या इ2पात संयं ारा इस िनिमpत दया गया एक माण प ।
(IV) 1000 घंट के दो aप र[चर परी'ण bूcबग या पाइcपग या काc2टग या [लेट Wेड के pयेक Wेड के इ2पात के Wेड
के िलए सेवा तापमान से 50 िडWी ऊपर के तापमान पर कए जाएंगे; जब भwी या अित ताप जोन म ह :
परं तु यह और क (क) वाdव म उपयोग क जाने वाली फोxजग क जांच 1000 घंटे के िलए 550 िडWी सटीWेड
तापमान पर क जानी चािहए और दाब कारण दरार क पूवyJत तापमान पर 1000 घंटे से अिधक हो मा2टर कव? से िलया
जा सके गा जो 20 ितशत रेखा के तp2थानी है। (ख) इस दाब पर 1000 घंटे के <यूनतम दाब जीवन क अपे'ा क जाती है और
दोन नमून को पूवyJत दाब और तापमान पर 1000 घंटे क जांच को पास कर लेना चािहए । (ग) इन नमून का चयन
यादृिzछक आधार पर संबंिधत राMय के मुgय बायलर िनरी'क ारा कया जा सकता है और नमूने अY? तैयार उpपाद के
आधार पर हो सकते ह# जैसे 25एमएम2 क ढाली +ई छड़ िजनपर सुसंगत िविनद?िPटय ारा यथा िविहत ताप उपचार कया
जाएगा ।
(vii) ऐसे बायलर के िलए िजनक 'मता 20 टन ित घंटा या उससे अिधक है िजनक साईट पर ही संयोिजत कए जाने क
अपे'ा है, उनके सम<वायोजन क पृथक प से आपूत क जा सके गी और 20 टन ित घंटा से कम 'मता के सभी बायलर के साथ
समि<वत प म सम<वायोजन या फ|टग माण प हगे िजनम प 3 म बायलर के िविनमा?ण के समय जारी !यौरे हगे ।
(घ) िनमाता क! मुहर- बायलर पर सहज दृHय 2थान पर मुहर होगी जैसे क नीचे दी गई है -
िनमा?ता का नाम..................................................................................................
(ड.) पाइप के िलए माण प)- प III क म िनमा?ता और िनरी'ण ािधकारी ारा ह2ता'6रत िविनमा?ण और परी'ण माण
प 2तुत कया जाएगा ।
(च) 2ूब का माण - प III ख म िनमा?ता और िनरी'ण ािधकारी ारा ह2ता'6रत िविनमा?ण और परी'ण माण प
2तुत कया जाएगा ।
.टपण : भारत या अ<य देश म िवgयात पाइप या bूब िनमा?ताZ (िविनयम 4क से िविनयम 4ज म यथा अिधकिथत रीित म के <=ीय
बायलर बोड? ारा मा<यता ा[त) ारा िनमत पाइप या bूब क दशा म, सामWी जांच िजसके अंतग?त यांिक जांच भी है, को उनके
ारा कया जा सके गा और सामिWय क जांच से संबंिधत िविशिPटय, िजसके अंतग?त उनके ारा यथा मािणत यांिक परी'ण भी है,
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 5
को उपयुJत 2तंभ या पैराZ म माण प म प III-क या प III-ख म नोट कर िलया जाएगा और यद पूवyJत अनुसार िवgयात
पाइप या bूब िनमा?ताZ से माण प 2तुत कया जाता है, तो ऐसे माण प को जहां तक वह सामWी क जांच िजसके अंतग?त इस
प म िविन7दPट याcक जांच भी है, से संबंिधत है, को िनरी'ण ािधकारी के माण प के 2थान पर 2वीकार कया जा सके गा ।
.टपण : प III-ग म माण प क फोटो2टेट ित को 2वीकार कया जाएगा परंतु यह क उसे िविनमा?ता या िनरी'ण ािधकारी ारा
िजसने मूल माण प पर ह2ता'र कए ह#, ारा पृPठांकत कया गया हो ।
(ज) हैडर, सूपर तापक या आटेपरेटर, !लोडाउन ट#क, फड वाटर ट#क, अकमुलेटर और िडरेटर के िविनमा?ण के दौरान िनरी'ण
का माण प- प III-ज म िनमा?ता और िनरी'ण ािधकारी ारा िविनमा?ण और जांच का माण प 2तुत कया जाएगा ।
(झ) िड2ड एंड या एंड कवर के िविनमा?ण के दौरान िनरी'ण का माण प- िनमा?ता और िनरी'ण ािधकारी ारा ह2ता'6रत
प III-झ म िविनमा?ण और जांच का माण प 2तुत कया जाएगा ।"।
(2) उप िविनयम 1 के अधीन आवेदन सयकत: भरी +ई }ावली (प XV-क से XV-छ) जो काय?कलाप के 'े पर लागू है, म
कया जाएगा या इसे आनलाइन भी 2तुत कया जा सके गा ।
(3) उप िविनयम (1) के अधीन स'म ािधकारी के प म मा<यता के िलए आवेदन करने वाली कोई फम? और िनरी'ण ािधकारी
के पास कम से कम उस 'े म िजसे मा<यता के िलए आवेदन कया गया है दो वष? का अनुभव होगा । िवgयात सामWी जांच योगशाला,
िवgयात इ2पात िनमा?ता, िवgयात ढलाई/ढालना, िवgयात bूब/पाइप िनमा?ता और िवgयात शेष जीवन िनधा?रण संगठन के प म
मा<यता के िलए आवेदन के िलए दो वष? का अनुभव इन िविनयम के उपबंध के अनुसार होगा ।
(4) िवदेश म िवgयात इ2पात िनमा?ता, िवgयात bूब/पाइप िनमा?ता, िवgयात ढलाई या िवgयात ढालना के प म मा<यता क
ई[सा रखने वाली फमN ारा भरी +ई Hन तािलका के साथ मूdयांकन सिमित के ~मण पर \यय को चुकाने के िलए 10,000 अमरीक
डालर (दस हजार अमरीक डालर) क फस जमा क जाएगी :
परं तु जहां फम? क उसी देश म एक से अिधक िविनमा?ण इकाइयां ह#, ित अित6रJत इकाई के िलए 2,000 अमरीक डालर (दो
हजार अमरीक डालर) क फस जमा क जाएगी ।
(5) िवदेश म स'म ािधकारी और िनरी'ण ािधकारी के प म मा<यता क ई[सा रखने वाली फमN ारा भरी +ई Hन
तािलका के साथ 10,000 अमरीक डालर (दस हजार अमरीक डालर) क फस जमा क जाएगी :
(6) उप िनयम (1) के अधीन भारत म मा<यता क ई[सा रखने वाली फमN ारा भरी +ई }ावली के साथ 15,000/-vपए (पं=ह
हजार vपए) क फस जमा क जाएगी और मा<यता के नवीकरण के िलए भरी +ई }ावली के साथ 10,000/-vपए (दस हजार vपए)
क फस जमा क जाएगी ।
(7) मूdयांकन सिमित फमN के िविनमा?ण संकमN का िवदेश म संिनमा?ण संकमN क दशा म फस क ाि[त से न!बे दन के भीतर
और देश म िविनमा?ण संकमN क दशा म साठ दन के भीतर मूdयांकन करे गी ।
यथाि2थित, मूdयांकक सिमित या मूdयांकन सिमित स'म ािधकारी या िनरी'ण ािधकारी के प म मा<यता के िलए आवेदन
करने वाली फम? के काय? िनPपादन क फस क ाि[त के साठ दन के भीतर मूdयांकन करे गी ।
मा<यता का माण प यथाि2थित, मूdयांकन सिमित के संयं के ~मण क तारीख से या मूdयांकक सिमित क बैठक से पांच वष? के
अविध के िलए वैध होगा । मा<यता के नवीकरण क दशा म यद कोई आवेदन िविनयम के अनुसार अपेि'त फस के साथ नवीकरण के
िलए ा[त होता है तो फम? को इन िविनयम म अिधकिथत aया का अनुसरण करने के पHचात् मा<यता दान क जा सके गी और पांच
वष? क और अविध के िलए माण प जारी कया जाएगा ।"।
6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
5. उJत िविनयम म िविनयम 4ञ म, उप िविनयम (2) के 2थान पर िननिलिखत उप िविनयम रखा जाएगा, अथा?त् :-
"(2) यूनतम
नतम अहता और अनुभव
(क) यांिक या उpपादन या वैVुत संयं या धातु िवlान इंजीिनयरी म कसी मा<यता ा[त सं2थान से अिनवाय?त: 2नातक:-
(ख) बायलर से संबंिधत िननिलिखत 'े म एकल या संयुJत प से <यूनतम पांच वष? का अनुभव,-
(i) िडजाइन;
(ii) िविनमा?ण;
(iii) ित2थापन;
(iv) चालन और अनुर'ण;
(v) िविनमा?ण या चालन और अनुर'ण के दौरान िनरी'ण और माणन;
(vi) उzच दाब वेcdडग-िनरी'ण;
(ग) इंिडयन सोसाइटी फार नॉन िड2QिJटव टेc2टग (आईएसएनटी) या आईएसएनटी ारा िवकरण और पराविनक परी'ण म परी'ण
क गैर िववंसकारी िविधय म आईएसएनटी ारा मा<यता ा[त कसी अ<य पेशेवर िनकाय से 2तर–II एनडीटी माण प ।"।
6. उJत िविनयम म िविनयम 4ज के ारं िभक पैरा को उप िविनयम (1) के प म संgयांकत कया जाएगा और इस कार
पुन:संgयांकत उप िविनयम (1) के पHचात् िननिलिखत उप िविनयम अंत म अंत:2थािपत कया जाएगा, अथा?त:् -
"(2) स'म ािधकारी के प म मा<यता के िलए, मूdयांकन सिमित स'म ािधकारी के प म मा<यता के िलए आवेदन करने
वाली फम? के काय? िनPपादन का इन िविनयम के उपबंध के अनुसरण म िविशPटतया िननिलिखत 'े म मूdयांकन करे गी, अथा?त् :-
(i) फम? या कं पनी एक रिज2Qीकृ त िनकाय होगा और यह एकल 2वािमpव नह1 होगा। भारत म चालन के िलए फम? या कं पनी
भारत म भी रिज2Qीकृ त होगी ।
(ii) स'म ािधकारी के िनिमpत अहत वेdडर को माण प जारी करने के िलए उpतरदायी ािधकृ त ह2ता'रकता? स'म
ािधकारी का कम?चारी होगा और उसे वेcdडग के 'े म यांिक या उpपादन या धातु िवlान या वेcdडग इं िजिनयरी म
िडWी/स्नातकोpतर िडWी या िवकरण तकनीक म 2तर II माण प के साथ पांच वष? का अनुभव होना चािहए ।
(iii) फम? या कं पनी के पास िननिलिखत सुिवधाZ के साथ एक काय?शाला होगी:
(क) नमून क वेcdडग करने के िलए वैVुत वेcdडग सेट ;
(ख) ी ही|टग सुिवधाएं ;
(ग) वेcdडग के िलए मंच ;
(घ) 2वयं क िननिलिखत जांच मशीन :
(i) साव?भौिमक जांच मशीन ;
(ii) एनडीटी-डाई वेधक जांच ;
(iii) नमून को तैयार करने के िलए मशीन ;
(iv) कठोरता जांचकता? (वैकिdपक) ;
(ड.) नमून क िवकरण, सूम और माइaो परी'ण को अनुमोदत अिभकरण को आउटसोस? कया जा सके गा ।
.टपण: भारत म चालन के िलए पूवyJत सुिवधाZ के साथ काय?शाला भारत म भी उपल!ध होगी ।
(iv) फम? या कं पनी इन िविनयम के अधीन वेdडर के परी'ण के िलए अपे'ा से िभl होगी
(v) िनरी'ण ािधकारी वेdडर के इनहाउस माणन के िलए स'म ािधकारी के प म भी काय? कर सके गा और
इस योजन के िलए वह कसी बाहरी अिभकरण िजसके पास वेdडर के इन हाउस माणन के िलए वेdड कए गए नमून
क जांच के िलए पूवyJत सुिवधाएं ह#, क सुिवधाZ का उपयोग कर सके गा परं तु उसके पास उपरोJत मद (ii) म वणत
ािधकृ त ह2ता'रकता? िनयोजनाधीन हो ।
.टप
ण : स'म ािधकारी के प म मा<यता ा[त सभी िवVमान फम या कं पिनय का इस कार मा<यता ा[त होना मा<यता
8. उJत िविनयम म, िविनयम 16 म, खंड (घ) म, "दाब का <यूनतम मान" श!द के 2थान पर, "अिधकतम अनुlेय दाब को उस
सामWी के देश के बायलर क शासी संिहताZ के िलए उपल!ध के प म िलया जाएगा िजससे वह संबंिधत है और मान के उपल!ध न होने
क दशा म, अिधकतम अनुlेय दाब का मूdयांकन करने के योजन के िलए, Et , दाब का <यूनतम मूdय" श!द रखे जाएंगे।
9. उJत िविनयम म , िविनयम 166 म खंड (च) म "f=िडजाइन तापमान पर [लेट का अिधकतम अनुlेय दाब (in N/mm2)"
अ'र, िचन, श!द, कोPठक और अंक के 2थान पर, "f सामWी के देश क शासी संिहताZ म यथा उपल!ध अिधकतम अनुlेय दाब मूdय
है िजससे वह संबंिधत है (in N/mm2)" अ'र, श!द, कोPठक और अंक रखे जाएंगे ।
10.
10. उJत िविनयम म, िविनयम 187 म, "f=अनुlेय दाब" िचन, अ'र और श!द के 2थान पर, "f =अिधकतम अनुlेय दाब मान
जैसाक सामWी के देश क शासी संिहताZ म िजनसे वह संबंिधत है, म उपल!ध है" अ'र और श!द रखे जाएंगे ।
11.
11. उJत िविनयम म, िविनयम 278 म "f=अनुlेय दाब" िचन, अ'र और श!द के 2थान पर "f=अिधकतम अनुlेय दाब मान
जैसाक सामWी के देश क शासी संिहताZ म िजनसे वह संबंिधत है, म उपल!ध है" अ'र और श!द रखे जाएंगे ।
12.
12. उJत िविनयम म, िविनयम 278क म, खंड (च) म "f=िडजाइन तापमान पर [लेट का अिधकतम अनुlेय दाब (in N/mm2)"
िचन, अ'र, श!द, कोPठक और अंक के 2थान पर, "f सामWी के देश क शासी संिहताZ म यथा उपल!ध अिधकतम अनुlेय दाब मूdय
है िजससे वह संबंिधत है (in N/mm2)" अ'र, श!द, कोष्ठक और अंक रखे जाएंगे ।
13.
13. िविनयम 281 का संशोधन - उJत िविनयम म, िविनयम 281 के 2थान पर िननिलिखत िविनयम रखा जाएगा, अथा?त् :-
"281.
281. अपेित मांउ4टग स5जा
∗
, और सहायक
परंतु गैस, तरल या ठोस =व ारा फायर कए जाने वाले बायलर म स2पसन म जहां तािपत सतह 20 वग? मीटर से अिधक
हो जाती है उनम कम से कम दो फड सािध उपल!ध कराए जाएंगे िजनक संयुJत 'मता बायलर क अिधकतम सतत रे |टग से
कम नह1 होगी: परं तु यह और क अ<य बायलर के िलए जहां fधन आपूत को बंद करने के पHचात् भी अपिशPट ताप रहता है, दो
फड सािध िजसम से pयेक क 'मता बायलर क अिधकतम सतत रे |टग से कम नह1 होगी, उपल!ध कराए जाएंगे । (बैटरी म
बायलर के िलए कृ पया िविनयम 336क देख) ;
(छ) एक !लोडाउन कोक या वाdव ;
(ज) hयूिजबल [लoस जैसा क िविनयम 331 म उपबंिधत है;
(झ) स'म \यिJत के जांच गेज के िलए एक अटैचमट ;
∗
टपण: यह िसफारश क जाती है क लंकाशायर और कािनश बायलर म सुर!ा वा#व म से एक उ'च वांप और िन*न
जल क कःम का होना चाहए । जल .यूब और ऊ1वाकार बहु-टु बुलर बायलर म वांप 3ारा ू5य!त: ूचािलत िन*न जल
अलाम होना चाहए । रै *स-बाटम कःम के सुर!ा वा#व 7जसम दो वा#व होते ह9 और 7जनम समान :प से 7ःूंग और लीवर
होता है पर इस =विनयम के ूयोजन के िलए दो सुर!ा वा#व के :प म =वचार कया जा सकेगा । मैर>न कःम के वायलर
क दशा म गलनीय लग के ःथान पर िन*न जल अलाम लगाया जा सकेगा ।
8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ञ) एक मेनहोल, जहां आकार और संिनमा?ण अनुlात करता है और ऐसे मेन होल या साइट होल बायलर क भावी सफाई
के िलए आवHयक है ।
(2) ऐसे बायलर क दशा म जो अिभ<न सुपर तापक के साथ सुसिMजत ह#, सुपर तापक आउटलेट हैडर के अंत म एक अित6रJत
सुर'ा वाdव लगाया जाएगा ।
(3) ऐसे बायलर क दशा म जो िनयत वाPप और जल रेखा के साथ सुसिMजत नह1 ह# ऐसे उप साधन जो pय'त: अपेि'त नह1 ह#
या िजनका उपयोग नह1 कया जाता है जैसे जल गेज, जल 2तंभ और गेज कोक पर बल नह1 दया जा सके गा ।
(4) तेल ारा दागे जाने वाले या गैस ारा दागे जाने वाले 2वचािलत या अY? 2वचािलत बायलर क दशा म गलनीय [लग पर
िनन जल अलाम? को अिधमान देते +ए फट कया जा सके गा, परं तु ऐसे बायलर fधन आपूत को बंद करने के िलए 2वचािलत और इसके
साथ फड पंप को आरं भ करने के िलए बायलर म िनन जल क दशा म 6Qcपग युिJत से सुसिMजत होने चािहए ।
(5) शैल क2म के एकल बायलर क दशा म जो अ<य बायलर के साथ बैटरी म जुड़ा +आ नह1 है िजसक तािपत सतह 102 मीटर2
(1100 वग? फु ट) से अनिधक है फड सािध को िवVुत आपत के िलए दो 2वतं ोत आवHयक नह1 हगे ।
(6) अयाय 14 के अधीन अpयंत लघु बायलर क दशा म वाPप दाब गेज को वाPप 2थान से जोड़ा जा सके गा या जल 2तंभ म
साइफन bूब या समक' युिJत से वाPप संपक? से जोड़ा जा सके गा जो गेज bूब को जल से भरा +आ रखेगी और पीतल या तांबे के
सिमuण का उपयोग कया जाता है तो साइफन bूब का <यूनतम आकार 6 िमलीमीटर (1/4 इं च) मानक पाइप आकार होगा ; अ<य
सामिWय के िलए पाइप या bूब का <यूनतम आंत6रक \यास 13 िमलीमीटर ( 1/2 इं च) होगा ।
(7) इलेोड बायलर
के िलए िविनयम 437 देख ।
(8) पुन: तापक के साथ बायलर क दशा म पुन: तापक को 105 ितशत 'मता क एक या अिधक 6रलीcवग युिJतय से (कु ल
'मता क 15 ितशत पुन: तापक आउटलेट और पहले रोक वाdव के बीच वाPप वाह पथ के बीच आवि2थत हगी) संरि'त कया
जाएगा िजससे आंत6रक असफलताZ क दशा म अित दाब से बचा जा सके ।" ।
14.
14. उJत िविनयम के िविनयम 338 म,-
(1) उप िविनयम (क) के 2थान पर िननिलिखत उप िविनयम रखा जाएगा, अथा?त् :-
"(क)(i) bूब के काय?शील दाब का अवधारण िननिलिखत सू ारा कया जाएगा:
ड!dयू.पी= 2f(T-C) समीकरण (87)
(D-T+C)
जहां, T=bूब क <यूनतम मोटाई, अथा?त् <यूनतम मोटाई–िमलीमीटर (इंच) म अनुlेय नकाराpमक सिहPुाता िमलीमीटर म
(इंच)
सी 0.75 िमलीमीटर (0.04") 70 kg/cm2 (1000 lbs./वग? इंच) के काय?शील दाब तक
या सी = 0 70 kg/cm2 (1000 lbs./ वग? इंच), से अिधक काय?शील दाब के िलए
ड!dयू.पी. = kg/cm2 (lbs./वग? इं च), म बायलर का काय?शील दाब
Sc= काय?शील धातु तापमान पर 100,000 घंट म 1 ितशत एलगेशन उpप<न करने के िलए औसत दाब ।
.टपण: साम'ी मू8य म9 Sc मूdय उपल!ध न होने क दशा म और ऐसी सामिWय के िलए यह lात है क वह भारत या िवदेश म बायलर
म उपयोग क गई ह# तो ऐसी सामिWय के िलए अनुlेय दाब को Et या Sr के िनन के प म िलया जा सकता है ।
1.5 1.6
(iv) काय?शील धातु तापमान को िननिलिखत के प म िलया जाएगा-
(क) अिभ<न इकोनोमाइजर bूब के िलए अिधकतम जल तापमान िजसके िलए एलीमट के भाग को िडजाइन कया गया है धन 11 िडWी
सटीWेड (20 िडWी फारे नहाइट);
(ख) भwी और बायलर bूब के िलए काय?शील दाब धन 28 िडWी सटीWेड (50 िडWी फारेनहाइट) का तp2थानी सेचूरेशन, तापमान;
(ग) क<वेJशन अित चालक bूब के िलए अिधकतम वाPप तापमान िजसके िलए एलीमट के भाग को िडजाइन कया गया है धन 39 िडWी
सटीWेड (70 िडWी फारे नहाइट);
(घ) रेिडयट अित चालक bूब के िलए िडजाइन कया गया अिधकतम वाPप तापमान धन 50 िडWी सटीWेड (90 िडWी
फारेनहाइट) ।";
(2) उप िविनयम (ग) के खंड (i) के 2थान पर िननिलिखत खंड रखा जाएगा, अथा?त् :-
"(i) साधारण- bूब जो बायलर के भाग के िलए त[त या शीत ब#ट ह#, िजसके अंतग?त इकोनोमाइजर, भwी दीवार, अित चालक और पुन:
चालक ह# इस खंड का अनुपालन कर गे और उन पर िननानुसार ताप उपचार कया जाएगा ।
- यद बाहरी \यास (ओडी) 141.3 िमलीमीटर से कम है और R/D<2.5- पीबीएचटी अपेि'त है ।"
-पी-91 और असट6टक इ2पात के िलए सामWी िविशिPटय म अपे'ाZ का अनुपालन कया जाएगा ।
जहां आर से bूब क के <=ीय रे ख म मोड़ का \यास अिभेत है (िमलीमीटर म) एवं डी bब का बाहरी \यास (िमलीमीटर म) अिभेत है ।
कतु मोड़ के भीतर वेdड को अनुlात नह1 कया जाएगा ।
चaक सीमाZ के भीतर िथcनग और िडपाच?र का िननिलिखत म से कसी एक िविध ारा दश?न कया जाएगा:
(क) सुसंगत और समाधानद सेवा अनुभव;
(ख) aया जांच;
(ग) मोड़ के दो ितशत मापमान ारा िजसके अंतग?त pयेक िशhट का पहला मोड़ शािमल है ।
चयन क गई िविध िविनमा?ता के िवकल्प पर होगी ।
10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
15.
15. उJत िविनयम म िविनयम 340 म उप िविनयम (च) म "f=काय?शील धातु तापमान पर सामWी के िलए अनुlेय दाब" ; िचन,
अ'र और श!द के 2थान पर "f=अिधकतम अनुlेय दाब मान जैसाक सामWी के देश क शासी संिहताZ म िजनसे वह संबंिधत है, म
उपल!ध है" अ'र और श!द रखे जाएंगे ।
16.
16. उJत िविनयम के िविनयम 362 के खंड (ग) के उप िविनयम (i) म "एस=अिधकतम अनुlेय दाब जैसा क सारणी 8 म िविन7दPट है"
िचन, अ'र, श!द और अंक के 2थान पर "S=अिधकतम अनुlेय दाब मान जैसाक सामWी के देश क शासी संिहताZ म िजनसे वह
संबंिधत है, म उपल!ध है" अ'र, श!द और अंक रखे जाएंगे ।
17.
17. उJत िविनयम के िविनयम 379 म,-
(1) उप िविनयम (क) के उपखंड (i) के 2थान पर िननिलिखत उप िविनयम रखा जाएगा, अथा?त् :-
"(i) िविनयम 381 के उप िविनयम (ड.) के उपबंध के अधीन रहते +ए pयेक उप िवकट बायलर क 2थल पर उpथापन करने के
पHचात् स'म \यिJत क उपि2थित म िनरी'ण ािधकारी ारा प 2 म यथा मािणत काय?शील दाब के अिधकतम 1¼
गुणा पर हाइeोिलक प से जांच क जाएगी और उसे बायलर पर कसी कमजोरी या ु6ट से मुJत के प म 2टािपत कया
जाएगा और pयेक अित िवकट बायलर जो कसी िनयत वाPप से और जल रे खा से युJत नह1 है िजसके दाब भाग जल वाPप
वाह के साथ िविभ<न दाब 2तर के िलए पदािभिहत ह# क 2थल पर उpथापन के पHचात् स'म \यिJत क उपि2थित म अित
तापक आउटलेट पर काय?शील दाब के अिधकतम 1½ से अ<यून काय?शील दाब पर कतु िनरी'ण ािधकारी ारा प 2 म
यथा मािणत 1¼ गुणा पर हाइeोिलक प से जांच क जाएगी, और उसे बायलर पर कसी कमजोरी या ु6ट से मुJत के प
म 2टािपत कया जाएगा ।";
(2) उप िविनयम (ग) और उप िविनयम (ट) म उJत उप िविनयम के अंत म दए गए, "6ट[पण" का लोप कया जाएगा ।
(3) उप िविनयम (छ) के 2थान पर िननिलिखत उप िविनयम रखा जाएगा, अथा?त् :-
"(छ) पHचातवत परी'ण पर बायलर क जांच िसवाय तब जब स'म \यिJत अ<यथा अपे'ा करे, िनरी'ण के पHचात् क
जाएगी और (i) उप िवकट बायलर को लगाया जाने वाला जांच दाब ऐसे पHचातवत परी'ण पर बायलर के काय?शील दाब के
1¼ से 1½ गुणा काय?शील दाब के बीच होगा ; अित िवकट बायलर के िलए लगाया जाने वाला जांच दाब ऐसे पHचातवत
परी'ण पर अित तापक आउटलेट दाब के 1¼ से 1½ गुणा काय?शील दाब के बीच होगा ।";
18.
18. उJत िविनयम म, िविनयम 380 म उप िविनयम (ग) के 2थान पर िननिलिखत उप िविनयम रखा जाएगा, अथा?त् :-
"(ग) सही !लोइं ग दाब पर वाdव को समायोिजत करने के पHचात्, बायलर क पूण? वाPप और फड जल को बंद करने और रोक
वाdव को बंद करने के पHचात् जांच क जाएगी, इस समय के दौरान िनरी'क दाब के एकित होने और जांच के अ<य !यौर के साथ साथ
सुर'ा वाdव क लोcडग और समायोजन क भी जांच क जाएगी ।"
(i) उप िवकट जल bूब बायलर या अित तापक से युJत बायलर क दशा म, फड जल संपक? और रोक वाdव को बंद करने क
आवHयकता नह1 है और यद कु ल वाdव 'े को ऊपर उठाया जाता है और संगणनाZ से उसे पया?[त पाया जाता है तो संचयन
जांच को पूरा कया गया माना जाएगा यद वाdव को इस कार समायोिजत कया जाता है या समायोिजत कया गया पाया
जाता है क कम से कम pयेक बायलर पर एक सुर'ा वाdव को बायलर के िडजाइन कए गए काय?शील दाब पर या उससे नीचे
सेट कया जाएगा और शेष बचे +ए सुर'ा वाdव को िडजाइन कए गए काय?शील दाब के तीन ितशत अिधक तक सेट कया जा
सकता है :
परं तु सभी वाdव ऊपर उठाए जांएगे ताक बायलर ारा सृिजत सभी वाPप को िडजाइन कए गए काय?शील दाब के दस ितशत से
अनिधक दाब ऊपर होने पर छोड़ा जा सके ।
(ii) अित िवकट बायलर या बायलर क दशा म िज<ह िनयत वाPप और जल रेखा के साथ सुसिMजत नह1 कया गया है िजनम जल
वाPप वाह के साथ साथ िविभ<न दाब के िलए दाब िह2से पुजेा के साथ िडजाइन कया गया है, सुर'ा वाdव को िडजाइन कए
गए काय?शील दाब से दस ितशत ऊपर तक के िलए सेट कया जाएगा: परं तु यह क सभी वाdव ऊपर उठ गे िजससे बायलर ारा
सृिजत कए जाने वाले सभी वाPप को िडजाइन कए गए काय?शील दाब से 13 ितशत से अनिधक दाब होने पर वाPप को छोड़ा
जा सके , परंतु यह क बायलर म मुgय वाPप दाब उzच होने पर 2वचािलत बन?र बंध णाली और मा2टर fधन 6Qप (एमएफटी)
है । सुर'ा वाdव के उठने क जांच हाइeोिलक प से े6रत िविधय से क जा सकती है ।
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 11
19.
19. उJत िविनयम म िविनयम 381 के 2थान पर िननिलिखत िविनयम रखा जाएगा, अथा?त् :-
81. रिज:;ीकरण
"381. ;ीकरण के िलए <=या-
(1) (क) िनरी'क, धारा 7 क उपधारा (1) के अधीन िविनयम 4 (ग) म यथा िविहत माण प और eाइंग के साथ रिज2Qीकरण
के िलए आवेदन क ाि[त पर जब बायलर को परी'ण के िलए उिचत प से तैयार कर दया गया है अपना यह समाधान करने के िलए
क बायलर को िविनमा?ण के 2थल से उसके उpथापन के 2थल तक प6रवहन के दौरान कोई नुकसान नह1 +आ है, अWसर होगा और उसका
िनमा?ता के माण प क शुYता का और उसम किथत सामWी और संिनमा?ण से संबंिधत अ<य िविशिPटयां का समाधान हो जाने पर
[धारा 14(1)(ग) और िविनयम 4] pयेक भाग क कारीगरी और संिनमा?ण के !यौर को गणना म लेगा ।
(ख) मुgय िनरी'क ारा योग क गई कसी वैवेकक शिJत के अधीन रहते +ए िनरी'ण ािधकारी ारा प 2 और प 3 म यथा
मािणत बायलर के अनुlेय काय?शील दाब को 2वीकार करे गा और बायलर का िनरी'ण करने के पHचात् िनरी'क उसक िविनयम 379
म क अपे'ाZ के अनुसार हाइeोिलक प से जांच करे गा और हाइeोिलक जांच के पHचात् प 5 म धारा 9 के अधीन अनंितम आदेश
जारी कया जाएगा ।
(ग) िनरी'क बायलर क उपरोJत िविशिPटय और िवमाZ को हाइeोिलक जांच के !यौर के साथ, "िनरी'ण lापन" पुि2तका (प-1
ारा िविनयम 386) म दज? करे गा जो िनमा?ता के बायलर के सभी कागजात के साथ मुgय िनरी'क को धारा 7 क उपधारा (3) के
अधीन िनरी'क क 6रपोट? के साथ 2तुत कए जाएंगे और रिज2Qी सं. जारी करने के पHचात् िनरी'क िविनयम 380 के अनुसार वाPप
जांच संचािलत करे गा और वाPप जांच के !यौर को प 1 म दज? करे गा ।
(घ) िविनयम 4 के खंड (ग) के अनुसार कसी िनरी'ण ािधकारी ारा प 2 म माण प और प 1 म िनरी'ण पुि2तका
का lापन 2तुत कया जाता है, तो िनरी'क अिधिनयम क धारा 7 क उपधारा (1) के अधीन रिज2Qीकरण के िलए कसी आवेदन क
ाि[त पर बायलर के ऐसे परी'ण और मापन के िलए अWसर होगा जो उसका यह समाधान कर क यह बायलर वही है िजसको िनरी'ण
ािधकारी ारा मािणत कया गया है । और उसका \यापक परी'ण करे गा और िनरी'ण ािधकारी के माण प क शुYता का
सुिनHचय करने के िलए क प6रवहन के दौरान कोई नुकसान का6रत नह1 कया गया है, मापमान क जांच करे गा ।
(2) (क) िनरी'क यद उसका बायलर क ि2थित िविशिPटय क शुYता और ''प 1 म िनरी'ण ािधकारी ारा दज? अनुमोदत
काय?शील दाब का समाधान हो जाता है वह िविनयम 379 के अनुसार बायलर क हाइeोिलक जांच करे गा ।
(ख) तब यद िनरी'क का समाधान हो जाता है क बायलर ने समाधानद प से जांच पूरी क है तो वह बायलर को काय? करने
मे समथ? बनाने के िलए अनंितम आदेश जारी करे गा ।"।
20.
20. उJत िविनयम के िविनयम 382 के उप िविनयम (क) म िविशPट अ'र के साथ राMय और संघ राMय क सूची म,
(1) "उिड़सा ओआर" िविPट के 2थान पर िननिलिखत िविPट रखी जाएगी, अथा?त् :-
"ओिड़शा ओडी";
(2) "तिमलनाडु " िविPट के पHचात् िननिलिखत िविPट अंत:2थािपत क जाएगी, अथा?त् :-
"तेलंगाना टीएस" ।
21.
21. उJत िविनयम के िविनयम 386 के 2थान पर िननिलिखत िविनयम रखा जाएगा, अथा?त् :-
(ख) पHचातवत िनरी'ण पर स'म \यिJत िनरी'ण, हाइeोिलक जांच और वाPप जांच जब वे क जाएं पर उसक 6ट[पिणय
सिहत उनक तारीख को दज? करे गा ।
*
िनर>!ण पु7ःतका @ापन को हमेशा ःव'छ और अBतन रखा जाना चाहए िनर>!ण पु7ःतका @ापन को िसवाय तब जब उसक
वाःतव म िनर>!क 3ारा अपे!ा हो उसे मुDय िनर>!क के कायालय म फाइल कया जाना चाहए
12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ग) यथाि2थित िनरी'क या स'म \यिJत िनरी'ण पुि2तका lापन म बायलर क साधारण ि2थित, मरमत, वह प6रमाण िजस तक
बायलर से fट संकम? आद को हटाया गया है, मरमत के िनरी'ण के िलए कए गए सभी आकि2मक 6रपोटN, मुgय वाPप पाइप
के िनरी'ण और दुघ?टनाZ आद के िलए कए गए सभी ~मण आद को भी दज? कया जाना चािहए ।
(घ) मुgय िनरी'क को lापन पुि2तका के 2तुत करने पर वह नए रिज2Qीकृ त बायलर क दशा म सभी िविशिPटयां क जांच करेगा
और उस काय?शील दाब के अनुlात करने का अनुमोदन करे गा और पुरान बायलर क दशा म मुgय िनरी'क, िनरी'क के
िनरी'ण के िनरी'ण क 6ट[पिणय और मरमत या दाब म कटौती के िलए कए गए 2ताव क जांच करे गा और बायलर के
िलए एक बार अनुमोदत कए गए दाब म मुgय िनरी'क के िलिखत ािधकार के िबना कोई फे रफार नह1 कया जाना चािहए ।" ।
22.
22. उJत िविनयम म िविनयम 391क के 2थान पर िननिलिखत िविनयम रखा जाएगा, अथा?त् :-
391क. बायलर
"391क का पुराना होना
(क) शैल क2म के बायलर :
(i) बायलर पर पुराने पड़ने के भाव के िलए काय?शील दाब जैसा क इन िविनयम म सू से संगिणत कया गया है को नीचे दी
गई सारणी के अनुसार कम कया जाएगा :
सारणी
(ii) उन बायलर के िलए िजनक [लेट क पहले ही काटकर जांच क गई है उनको बायलर क जांच क तारीख से पचास वष? क
और आयु दान क जाएगी । जांच के पHचात् वह काय?शील दाब िजसे अनुlात कया जाएगा वह नीचे दी गई सारणी के अनुसार कमी क
जाएगी :
सारणी
(ii) 400 िडWी सटीWेड (मुgय वाPप आउटलेट तापमान) से कम तापमान पर चालन कर रहे बायलर जब पीस वष? क आयु ा[त
करने पर संघटक के शेष जीवन का िनधा?रण करने के िलए नीचे दी गई सारणी के अनुसार संघटक के िलए रे मेनट लाइफ एसेसमट
आगनाइजेशन ारा इनक जांच क जाएगी । यद प6रणाम के <=ीय बायलर बोड? ारा अिधकिथत मानक के अनुसार 2वीकाय? ह
तो यथाि2थित मुgय िनरी'क/बायलर िनदेशक ारा बायलर के जीवन को पzचीस वष? क और अविध के िलए बढ़ाने के िलए या
ऐसी कम अविध के िलए जैसी क रे मेनट लाइफ एसेसमट आगनाइजेशन ारा िसफा6रश क जाए, एक माण प जारी कया
जाएगा । शेष जीवन के िलए इस िनधा?रण को के <=ीय बायलर बोड? ारा अनुमोदत रे मेनट लाइफ एसेसमट आगनाइजेशन ारा
pयेक बारह वष? के पHचात् चािलत कया जाएगा । रे मेनट लाइफ एसेसमट आगनाइजेशन यथाि2थित मुgय िनरी'क/बायलर
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 13
िनदेशक के काया?लय के साथ शेष जीवन िनधा?रण और िव2तार के 'े म नजदीक सम<वय के साथ काय? करे गा । ऐसे बायलर के
काय?शील दाब को रे मेनट लाइफ एसेसमट आगनाइजेशन क िसफा6रश पर कम कया जा सके गा ।
इस िविनयम म अंतवPट कसी भी बात के होते +ए, 50 कलोWाम/सीएम2 दाब पर काय? कर रहे और 400 िडWी सटीWेड (मुgय
वाPप आउटलेट तापमान) से कम तापमान पर काय? कर रहे बायलर के िलए ऐसा िव2तृत शेष जीवन िनधा?रण आlापक नह1 है ।
तथािप, ऐसे मामल म ऐसे बायलर के eम और हेडर क पराविनक परी'ण, चुबकय तpव परी'ण और रंजक भेदक परी'ण
ारा जांच क जाएगी ।
(ग) ताप 6रकवरी वाPप जिन (एचआरएसजीएस) :
ताप 6रकवरी वाPप जिन (एचआरएसजीएस) जो क 400 िडWी सटीWेड (मुgय वाPप आउटलेट तापमान) से अिधक के तापमान पर काय?
कर रहे ह# क गैर िववंसकारी प से रे मेनट लाइफ एसेसमट आगनाइजेशन ारा नीचे दी गई सारणी के अनुसार संघटक के उनके ारा
100,000 घंट तक चालन के पHचात् संघटक के शेष जीवन के िनधा?रण के िलए जांच क जाएगी ।
सारणी-
सारणी-1
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)
@ *
@ *
हैडर (4000
सटीेड से कम)
अटैपरे टर हेडर हां हां नह
हां हां नह
नह
हां हां हां वैल मापमान
इकोनोमाइजर हां नह
नह
नह
नह
हां नह
हां नह
हां
ूब
#
हैडर (4000
सटीेड और
अिधक)
14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
मु2य वाप हां नह
नह
नह
हां नह
नह
हां नह
हां
पाइ5पग
शीत पुन: ताप हां नह
नह
नह
नह
नह
नह
हां नह
हां
पाइ5पग
गम, पुन: ताप हां नह
नह
नह
हां नह
नह
हां नह
हां
पाइ5पग
एसएच/आरएच हां हां नह
हां हां नह
नह
हां नह
हां
5लक
बक ूब हां नह
नह
नह
नह
नह
नह
हां नह
नह
सारणी-
सारणी-2
(2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
@ *
@ *
इकोनोमाइजर हां नह
नह
नह
नह
हां नह
हां नह
नह
कुंडिलयां
क वे!शन हां नह
नह
नह
नह
हां नह
हां नह
नह
अित तापक
कुंडिलयां
तापक
कुंडिलयां
तापक
कुडिलयां
भ7ी जल हां नह
नह
नह
नह
हां हां हां नह
नह
दीवार
@
पाइ5पग
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 15
1 2 3 4 5 6 7 8 9 10 11 12
एसएच / आरएच ूब नह
नह
नह
नह
नह
हां * नह
नह
नह
हां *
आउटलेट 5लक
मोटाई
वापक ूब नह
नह
नह
नह
नह
हां * हां * न ह
नह
हां *
इकोनोमाइजर ूब नह
नह
नह
नह
नह
हां * हां * नह
नह
हां *
आउटलेट हेडर
इकोनोमाइजर
24.
24. उJत िविनयम के िविनयम 520 के 6ट[पण म, "यांिक अवमुिJत युिJत का उपबंध" श!द के पHचात्, "या एच पी तापक को
बाईपास करने के िलए तीन मागय वाdव" अ'र और श!द रखे जाएंगे ।
25.
25. उJत िविनयम के िविनयम 554क के खंड (च) म "f=
"f=िडजाइन तापमान (in N/mn2 ) पर [लेट का अिधकतम अनुlेय दाब" िचन,
अ'र, श!द, अंक और कोPठक के 2थान पर, " एफ अिधकतम अनुlेय दाब मूdय है जो उस सामWी के देश क शासी संिहताZ के िलए
उपल!ध (in N/mn2 ) है िजससे वह संबंध रखती है" अ'र, श!द, अंक और कोPठक रखे जाएंगे ।
16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
26.
26. उJत िविनयम के िविनयम 561 के उप िविनयम (ख) के खंड (iv) के 2थान पर िननिलिखत खंड रखा जाएगा, अथा?त् :-
"(iv) संघात जांच – संघात जांच नमून दो म से एक क2म के ह# और आकृ ित 21क और आकृ ित 21ख म उपदशत िवमाZ के ह# (देख
िविनयम 263), खांच वेdड कए गए धातु म वेdड क धुरी पर अंतवPट होगी और खांचे क धुरी [लेट क सतह के लंबवत् होगी ।
जांच िननानुसार क जाएगी :
यू खांच के साथ-साथ वी खांच नमूने के िलए 20+2 िडWी सटीWेड तापमान पर । वी खांच नमूने क दशा म, खांच के बोटम के िमलाने को
ब+त सावधानी से कया जाएगा । यू खांच और वी खांच नमूने के बीच िवकdप िनरी'ण ािधकारी के िवके क पर होगी ।
संघात जांच नमूने से अिभा[त <यूनतम प6रणाम िननानुसार होगा:
(क) यू खांच नमूना 5.50 kgfm/cm2
6ट[पण: उपरोJत मान 2.76 kgfm को खांच के नीचे सेJशनल 'े को िवभािजत करते ह# ।"।
27.
27. उJत िविनयम के िविनयम 605 के 2थान पर िननिलिखत िविनयम रखा जाएगा , अथा?त् :-
30. उJत िविनयम के प 1 के 2थान पर िनिनिखत प रखा जाएगा , अथा?त् :-
30.
@प 1
साघारण
िजला....................................
2वामी...................................
कारखाने का पता .......................
िविशFयाँ और िवमाएं
बॉयलर क क2मः मुgय िवमाएं :
िनमा?ताः आशियत काय?शील दाबः
िनमा?ण का 2थान और वष?ः िनमा?ता का संgयाकः
बॉयलर का िववरणः
बॉयलर का नाम........................
िनमा?ता िविनमा?ण................ कWा/सेमी2 तक हाइeोिलक परी'ण eाइगं सं. .................. ा: कया ।
िनरी'ण नाम ................................
सामWी, िनमा?ण, पय?वे'ण, हाइeोिलक परी'ण........................का ािघकार परी'ण
ा: कए ..........................
18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
दाब वाले भाग का िववरण
a.स. दाब वाले भाग का नाम आकार सामWी क िविशयां
बेलनाकार शैल
(क) (ख)
शैल या िमwी का eम वाPप eम
िह2स का नाम
संgयांक
एंड [लेट के बीच लबाई
एंड [लेट क सीस से लबाई
भीतरी सबसे बड़ी बेdट का ास
[लेट क मोटाई
लॉ<गीbूडनल सीस
ि2थित ( बजे)
प6रधीय सीस
सीस क सं. (बाहरी और आि<तरक)
मेनहोल,
होल, हJड और साइड होल दरवाजे और :टैIड Kलाकस
,
िह2से और सामcWया
यहां नीचे ...............................................................................
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 19
सं. और ि2थित
े ड या [लेट फलेजंड
बॉयलर का ओपcनग, ल. X चौ.
े म ार, ल. X चौ.
े म आ<त6रक, बाहय, उठा +आ, दबा +आ
िछ
े म ठोस, बेdड कया +आ, का2ट
ेश
व देशा<तरी धुरे पर े म का अनुभाग
दरवाजा, क2म और मोटाई
दरवाजा, यद आ<त6रक, 2पीगोट िJलयरस है तो
बोdटस, सं. !यास, चूड़ी वाले नट
बोdटस, िपच सक? ल
के पंरो6टगं वलव, चौ. X मोटाई.
सं. .........................
िवमाएँ ......................... ि2थितयाँ ...............
फट कया गया के पंरो6टगं वलिवगं ........................ अनुभाग ......................
छ
ि
ी
न
दरवाजा, क2म ............... बोdट ास, .......... चूड़ीदार ..... 2पीगोट िJलयरस...........
श
द सफाई वाले [लगस, सं. ........... ास ................. ि2थित ..............
द
ऊँ चाई ............... !यास (बाहय) शीष?............... आधार................. मोटाई ...............
आ 2टोप वाdव के नीचे का 2टैड पाईप ........ ऊँ चाई ........ ास (बाहय)....... मोटाई ..........
क
ा
ल
hल#ज ...................
भटटी,
भटटी, =ाउन और अपटेक
र
सं. ........................................... कार ..........................
ंा
ार
औ
क य pयेक भटटी म सgत करने वाले वdव क सं. ............... अनु2थीय सीस ि2थित
थ ा ्ट
व ट
ु
न
ध
$
भ के <= के बीच लबाई
उ
अ
आि<तरक ास
[लेट क मोटाई
संकर bूब या 2टीफ<स? क
ि2थित
माउं 4टग और सOाएं
संgयाक ास कार सामWी बोdटेड या वेdड कया +आ
सुर'ा
सुर'ा मुgय
द रोधक
आ
व सहायक रोधक
'
ा
व फड
!लो-डाउन
अ<तः'ेपक
सुरा वा8व
(अ) (आ) (इ)
pयेक चे2ट के वाdव क सं....................
क2म ......................................
वाdव सीट का ास (िममी.) ......................
नेक का ास (िममी.) .......................
आउटलेट का ास (िममी.) ..........................
E 1.5T
A= As = A 1 +
C.P.
1000
प.रतP सतह
कु ल प6रत: सतह .................................................................. वग? मी.
वा-प - पाईप
मुBय वा-प पाईप क! योजना
-
________________________________________________________________________________________________
िनरीण .टपिणयां
बॉयलर प.रचर और इंजीिनयर क! िविशFयां
~मण क तारीख नाम Wेड माण प सं. िनग?म क तारीख
बॉयलर को .............. शैल [लेट पर नीचे दशा?यी गई 2टांप से 2टांिपत कया गया है:-
बॉयलर के सपूण? होने पर इसका .......... दन ........... को स'म ि क उपि2थित म .............. कWा/सेमी2 (जी) के हाइeोिलक
परी'ण दाब के अधीन कया गया और समाधानद परी'ण रहा ।
सभी वेdड कए गए जोड़ का जहां कह1 लागू है अिवनाशी औऱ िवनाशी परी'ण के अधीन उपयोग कया और समाधानद पाया गया ।
हमने 2वंय का समाधान कर िलया है क बॉयलर का िनमा?ण और िवमाएं वैसी ह# जैसे हमारे ारा ह2ता'6रत ......... िनमा?ता eांइग
संgया ........... म दशा?या गया है और हमारे ारा ितह2ता'6रत प III म िविनमा?ण के िलए िनमा?ता माण-प म िव
िविशियां हमारे सवy@म lान और िवास के आधार पर सही ह# ।
“@प II (2)
हम मािणत करते ह# क िनमा?ता संgया ................ के अधीन मैसस? ................... ारा संिनमत ..................... बॉयलर
का संिनमा?ण हमारे पय?वे'ण के अधीन कया गया था और स'म ि ारा संिनमा?ण क िविभ4 अव2थाZ पर िनरी'ण कया गया
था और यह क संिनमा?ण और कारीगरी समाधान द थी और बॉयलर अिधिनयम 1923 के , अधीन िवरिचत िविनयम के अनुसार
बॉयलर के िडजाईन और संिनमा?ण के िलए मानक शतN के अनुप थी ।
नीचे दये गये िववरण के अनुसार बॉयलर संघटक को 2टाcपत कया गया है, जहां कही लागू है ।
संघटक का नाम eांइग सं.
2टािपत करने के !यौरे
बॉयलर के संिनमा?ण म यु सामWी के नमून का स'म ि क उपि2थित म परी'ण कया गया और िविनयम का अनुपालन पाया
गया ।
सभी वेdड क गई सीस को जहां कही लागू िवनाशकारी और अिवनाशकारी परी'ा के अधीन योग कया गया और समाधानद पाया
गया।
हमने 2वयं का समाधान कर िलया है क बॉयलर का िनमा?ण और िवमाएं वैसी ही है जैसे हमारे ारा ह2ता'6रत िनमा?ता eाइगं संgया
............... म दशा?या गया है और यह क हमारे ारा ितह2ता'6रत प III म िविनमा?ण के िलए िनमा?ता माण-प म िव
िविशPतंया हमारे सवy@म lान और िवHवास के अनुसार पर सही है।
32. उ िविनयम म प III के 2थान पर िननिलिखत vप रखा जायेगा, अथा?त:
“@प III[
[िविनयम 4 (ग) (ii) देख]
िविनमाता और परीण के िलए िनमाता का माण प) -
5. eम/शैल के !यौरे
शैल [लेट bूब [लेट शीष?
. . .
ी ी ी
म म म र
ा ल
स ाई िम ाई िम ाई म
ि क ए
न
त ा ोट ा ोट ा ोट ा ण इ
ि य य
आ
ाई य
1 म म म र < .
ं. . 4 7 4 7 4 ा 7 र
र
ी
प म ब म 6 म 6 म क 6 $ प
स
त 2 ि ि ि औ
प .
म ल
.
ी
.
ी
.
ी
ा ू न क क ( ल स
न य म र म र म ो क ए
0 $ $ क ह /
म
ि त
म
ि त
म
ि ै न िल
ो स
0 0 श स
ड म ;
आ आ ि इ स
ा ी
ह ब
1 2 3 4 5 6 7 8 9 10 11 12 13
* (1) समतल (2) िडश के आकार का (3) दीघ? वृ@जीय (4) अघ?गोलीय उपदशत करे ।
6. हैडर और बॉJस
7. (माऊं|टग)
सं. पYित सामWी क2म सं. आकार
1. मुgय 2टाप वॉdव
सहायक 2टाप वॉdव
सुर'ा वॉdव (क)
2. (ख)
3. (ग)
बलो-डाउन वाdव
फड चेक वाdव
4.
5.
8. सुर'ा वाdव के !यौर और परी'ण प6रणाम (िविनयम 4(ग) (VII)
िविनमा?ता .....................................................................................................
वाdव के पहचान िच<ह ................................................................................
िनमा?ता संgया ........................................................................................
क2म .......................................................................................................
जीवन (मी.मी.) .............................................. eाइं ग सं. ..........................
वाdव का !यौराः
सामWी
.................................................................................................................
वाdव सीट
.................................................................................................................
समतल/कोणीय
..................................................................................................................
वाdव सीटीगं का ास
..................................................................................................................
वाdव क बॉडीः
सामWी
..................................................................................................................
नेक पर ओपिनगं
..................................................................................................................
आउटलेट पर ओपिनगं
....................................................................................................................
ि2गं :
सामWी
...................................................................................................................
िविनमा?ण क aया
...................................................................................................................
रासायिनक संयोजन
...................................................................................................................
प6रमापः
कुं डली का बा
ास
..................................................................................................................
तार के सेJसन
..................................................................................................................
कुं डिलय क संgया
..................................................................................................................
28 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
कुं डिलय क मु लबाई
.....................................................................................................................
परी'ण प6रणामः
परी'ण का 2थान ....................................... तारीख
.............................................................................................................................
Jलोcजग डाउन दाब
6ट[पणीः
Jया वाdव चरमराता है ?
..............................................................................................................................
Jया वाdव टपकता है ?
..............................................................................................................................
वायु िनPकासन दाब
..............................................................................................................................
वाdव के कार और परी'ण प6रणाम का सार ...............................................
वाdव क क2म
...............................................................................................................................
परी'ण का 2थान .......................... तारीख..................
................................................. .................................................
परी'ण प6रणाम ारा िनर<तर ‘ग’
....................................................................................................................
अिभेत िनPकासन दाब के िलए वाdव क 'मता ................................................
9. मािणत कया जाता है क ह2तलेख म हमारे ारा िव िववरण सही है और धारा 2 से 9 म वह िह2से और साएं, िजनके नाम पर
िवियां क गई ह# का बायलर के सि4मा?ण और साZ म उपयोग कया गया है। उपयोग +ए िविभ4 िह2स के िलए दशत िववरण,
संबंिधत िनमा?ताZ से ा: संल माण-प के अनुसार ह#।
हमारे िजमेदार ितिनिध िजनके नीचे यहां ह2ता'र संल ह#, उपर िलिखत हमारे कायN पर ................ कWा/ सैमी.2 के दाब के िलए
तथा ........... दन ....................20 ................. को समाधानद प से एक जल परी'ण कया गया उनक उपि2थित म बॉयलर
अिधिनयम, 1923 के अधीन िविनयम के अनुपालन के िलए बॉयलर का िडज़ाइन और सिनमा?ण कया गया है।
िननतम दाब ............................. (संघटक का नाम) के िलए है और ..................... कWा/ सैमी.2 ह#।
33. उ िविनयम म प III-अ के 2थान पर िननिलिखत vप रखा जाएगा, अथा?त :-
“@प III -क
पाईप के िविनमाण और
और परीण का माणप)
माण प सं. .................................... तारीख ..........................
िह2स का नाम और माा ....................................................................................
eाइं ग सं. ...................................................................................................
िनमा?ता का नाम और पता ...............................................................................
Wाहक का नाम और पता ..................................................................................
िड़जाइन दाब ..............................क.Wा./ सै.मी.2
िड़जाइन तापमान ........................... से.०
कzची सामिWयां
िविनमा?ण क aया .................................................................
पूण?तः कdड/6रड ...................................................................
रासयिनक संयोजन ..................................................................
ताप संgया .......................................................................
आकार .................................................................................
परी'ण माणप क सं. और तारीख ........................................
इ2पात िनमा?ता का नाम ......................................................
िनरी'ण ािधकारी का नाम ......................................................
पाईप
िविनमा?ण aया .................................................................
मुgय िवमाएं ......................................................................
सहनशीलता .......................................................................
िविन7दियां .........................................................................
पाईप पर बैड परी'ण या वेdड ........................................
समतल करने परी'ण ......................................................
अ<य परी'ण ....................................................................
तनन सामय ....................................................................
रासयिनक संयोजन ..............................................................
ताप अिभaया ................................................................
हाइeौिलक परी'ण ............................... क.Wा./ सै.मी.2
िनरी'ण ािधकारी /िवgयात पाईप िनमा?ता का पहचान िच<ह .........................
.टपणः इसके अित6र यथाि2थित िविनयम 4(ग) (vi) या उस 6ट[पण क अपे'ाZ के साथ सहमत होते +ए सामWी से संबंिधत
िनAिलिखत सूचना सारणीब प म दी जाएगी। सूचना, 2थािपत परी'ण डाटा से दी जा सकती है या यद सामWी मानक
िवशेषता के अनुप है, तो इसके 2थान पर मानक का एक दया जा सकता है ।
धातु 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600
तापमान
िडWी स.
ईटी
एससी
एसआर
एमएड!लूपी
30 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
** एससी एसआर के प6रमाण को जvरत पड़ने पर के वल उ<ही पाईप के संदभ? म दया जाना है िजनका उपयोग 454 िडWी से.
(850०फा.) से उपर के संचािलत धातु तापमान पर कया जाता है।
मािणत कया जाता है क यहां िव िविशियां सही है। फे िRके टड घटक क िविशियां रे खािच सं. ................. म
दखाई गई ह#।
भारतीय बॉयलर िविनयम क अनुपालना करते +ए पाईप को अिधकतम संचािलत .................. क.Wा/ सै.मी.2 दाब और
अिधकतम ................ िडWी से. तापमान के िलए िडज़ाइन कया और बनाया गया है । और हमारे िजमेवार ितिनिध िजनके यहां नीचे
ह2ता'र दए गए ह# क उपि2थित म ................ मास ..............20, को ............... क. Wा./ सै.मी2 का संतोषद जल परी'ण कया
गया।
हमने 2वंय का समाधान कर िलया है क ......................... का सिनमा?ण भारतीय बॉयलर िविनयम, 1950 के अनुसार +आ
है। तैयार पाईप से िलए गए नमून पर कए गए परी'ण के हम सा'ी है और इसम िव िविशयां सही ह#।
2थान .....................
तारीख ....................
6ट[पण (1):— यह प पाईप िविनमा?ता और पाईप फे Rीके टर के िलए आिHयत है। के वल ऐसे 2तभं या पैरा जो लागू ह#, या
सूचना जो अ<य माणप से ली या जुटाई जा सकती है, को इस प म भरा या िव कया जाएगा।
6ट[पण (2):—कह1 और से ा: इ2पात पाईप से क गई फे Rीके शन क दशा म, “सामWी” और “पाईप” के संदभ? म
िविशियां उसी कार के माणप से ली गई है जैसी पाइप के संबंध म ा: +ई है और उपयु 2तभं और
पैरा म नोट क गई ह#।
6ट[पण (3):— 2टाक और aय के योजन के िलए, पांच पाइप से अनिधक पर एक प जारी होगा।
इ2पात से बने पाईप क दशा म, भारत या अ<य देश म िवgयात इ2पात िनमा?ता ारा बनाए और परीि'त कए
गए ह#, प IV म उनके ारा मािणत सामWी के संदभ? म िविशयां इस माण प म की सामWी के उपयु
2तभं या पैरा म नोट क जाएगी।
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 31
34. उ िविनयम म प III-आ के 2थान िननिलिखत प रखा जाएगा, अथा?त:-
“ @प III -ख
कzची सामWी
िविनमा?ण क aया .................................................................
पुण?तः कdड/6रड ...................................................................
रासयिनक संयोजन ..................................................................
ताप संgया .......................................................................
आकार .................................................................................
परी'ण माणप सं. और तारीख ........................................
इ2पात िनमा?ता का नाम ......................................................
िनरी'ण ािधकारी का नाम ......................................................
bूब
िविनमा?ण क aया .................................................................
मुgय िवमाएं ......................................................................
सहनशीलता .......................................................................
िविशियां .........................................................................
तनन साम?य ....................................................................
रसायिनक संरचना ितश@ा ..............................................................
बड परी'ण ..........................................................
फल6टगं परी'ण ..........................................................
aिशगं परी'ण...............................................................
hलेयर संबंधी परी'ण ............................................................
hलैज एलगेशन परी'ण ..................................................................
अ<य परी'ण
ताप उपचार ........................................................
हाइeौिलक परी'ण ............................... क.Wा./ सै.मी.2
िनरी'ण ािधकारी /िवgयात bूब िनमा?ता का पहचान िच<ह .........................
.टपणः इसके अित6र, यथाि2थित िविनयम, 4(ग) (vi) या उस 6ट[पण क अपे'ाZ के साथ सहमत होते +ए सामWी से
संबंिधत िनAिलिखत सूचना सारणीब तरीके से दी जाएगी। सूचना, 2थािपत परी'ण डाटा से दी जा सकती है या यद सामWी
मानक िवशेषता के अनुप है, तो इसके 2थान पर मानक का एक उरण दया जा सकता है।
धातु का 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600
तापमान
िडWी स.
ईटी
एससी
एसआर
एमएड!लूपी
32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
** एससी और एसआर के मूdय को जvरत पड़ने पर के वल उ<ही टयूब के संदभ? म दया जाना है िजनका योग 454 िडWी से.
(850 िडWी फा.) से उपर के संचािलत धातु तापमान पर कया जाता है।
मािणत कया जाता है क यहां िव िविशयां सही है। फे िRके टड संघटक क िविशियां eाइगं सं. ................. म दशा?ई
गई ह#।
bूब का िडजाइन और संिनमा?ण भारतीयू बॉयलर िविनयम का अनुपालन करने के िलए संचािलत .................. क.Wा/
सै.मी. दाब और अिधकतम ................ िडWी से. तापमान के िलए कया गया है । और हमारे िजमेवार ितिनिध िजनके यहां ह2ता'र
2
दए गए ह# क उपि2थित म ................ मास ..............20 को ............... क. Wा./ सै.मी2 का जल परी'ण संतोषद ढ़ग से कया
गया। ट्
हमन 2वयं का समाधान कर िलया है क ......................... का सिनमा?ण भारतीय बॉयलर िविनयम, 1950 के अनुसार +आ
है। तैयार टयूब से िलए गए नमून पर कए गए परी'ण के हम सा'ी है और इसम िव िविशयां सही ह#।
2थान .....................
तारीख ....................
6ट[पण (1): — इस प का उपयोग bूब िविनमा?ता और bूब फे Rीके टर के िलए आशियत है। के वल ऐसे 2तभ या पैरा जो
लागू ह#, या सूचना जो अ<य माणप से ली या जुटाई जा सकती है, को इस प म भरा या िव कया
जाएगा।
6ट[पण (2):— कह1 और से ा: इ2पात bूब से बनाई गई फे Rीके शन क दशा म, “सामWी” और “टयूब” के संदभ? म
िविशियां उसी कार के माणप से ली गई है जैसी पाइप के संबंध म ा: +ई है और उपयु 2तभ और
पैरा म नोट क गई ह#।
6ट[पण (3):— 2टाक और aय के योजन के िलए, पांच टयूब से अनिधक पर एक प जारी होगा।
इ2पात से बनी टयूब क दशा म, भारत या अ<य देश म िवgयात इ2पात िनमा?ता ारा बनाई और परीि'त क गई ह#, प
IV म उनके ारा मािणत सामWी के संदभ? म िविशयां इस माण प म की सामिWय के उपयु 2तभ या पैरा म नोट क
जाएगी ।''।
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 33
35. उ िविनयम म प III-ग के 2थान पर िनAिलिखत प रखा जाएगा, अथा?त:-
“@प III -ग
धातु का 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600
तापमान
िडWी स.
एमएड!लूपी
की सामWी
िविनमा?ण क aया .................................................................
पूण?तः कdड/6रड ...................................................................
रासयिनक संयोजन ..................................................................
ताप संgया .......................................................................
आकार .................................................................................
परी'ण माणप क सं. और तारीख ........................................
िनमा?ता का नाम ......................................................
िनरी'ण ािधकारी का नाम ......................................................
.......... का िडजाइन और संिनमा?ण भारतीय बॉयलर िविनयम 1956 का अनुपालन करने के िलए .................. को अिधकतम
संचािलत क.Wा/ सै.मी.2 दाब और अिधकतम ................ िडWी से. तापमान के िलए कया गया ह# । और हमारे िजमेवार ितिनिध
34 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
िजनके यहां ह2ता'र दए गए ह# क उपि2थित म ................ मास ..............20 को ............... क. Wा./ सै.मी2 का हाइeोिलक
परी'ण संतोषप= प से कया गया।
हमने 2वयं का समाधान कर िलया है क ......................... का संिनमा?ण तथा परी'ण भारतीय बॉयलर िविनयम, 1950 के
अनुसार +आ है। हम यह और मािणत करते ह# क इसम दज? िविशयां सही ह#।
(2) सुर'ा वाdव क दशा म, प III क मद सं.-8 म अपेि'त !यौरे तथा परी'ण प6रणाम को भी िविनमा?ता और िनरी'ण
ािधकारी ारा सयक vप से ह2ता'6रत करके दया जाएगा ।
(3) 2टाक और aय के योजन के िलए, पचास माउं |टग तथा साZ से अनिधक पर एक प जारी कया जाएगा”।
36. उ िविनयम के प III- घ का लोप कया जाएगा, अथा?तः-
37. उ िविनयम के प III- ड का लोप कया जाएगा ।
38. उ िविनयम म प III-च के 2थान पर िनAिलिखत प रखा जाएगा, अथा?त :-
@प III
“ -च
(िविनयम 73 से 80 देख)
िविनमाण तथा ढ़लाई
ढ़लाई के परीण का माण प)
माण प सं. तथा तारीख ....................................
ताप संgया* तथा पे|टग क तारीख .......................................................................
िनमा?ता का नाम और पता ...............................................................................
Wाहक का नाम और पता ..................................................................................
eाइं ग सं. .............................................................
िववरण तथा माा ............................................ aमांक सं. .........................................
फाउं eी क पहचान ..............................
रासायिनक संयोजन
ताप उपचार
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 35
*100 एमएम से अिधक के आकार पर ढ़लाई के िलए ताप संgया ढ़ालने के अनुसार होनी चािहए''।
39. उ िविनयम म प III-छ के 2थान पर िनAिलिखत प रखा जाएगा, अथा?त :-
@प III
“ -छ
(िविनयम 81 से 85 देख)
िविनमाण और फोVजग के परीण का माण प)
माण प सं. तथा तारीख
ताप सं.
की सामिWय का !यौरा
िनमा?ता का नाम और पता ...............................................................................
Wाहक का नाम और पता ..................................................................................
eाइं ग सं. .............................................................
वण?न तथा माा ............................................ aमांक सं. .........................................
फोज? शॉप क पहचान ..............................
रासायिनक संयोजन
ताप उपचार
मािणत कया जाता है इसम हमारे ारा दज? िविशियां सही ह#। यह भारतीय बॉयलर अिधिनयम क अपे'ाZ को पूरा करती ह# ।
40. उ िविनयम म प III-छ के पात िनAिलिखत प अतः2थािपत कया जाएगा, अथा?त :-
“@प III -ज
(िविनयम 4 देख)
(हैडर,
र, डीसुपर तापक/
तापक/अटेWपरे Kलोडाउन टJक फ!डवाटर टJक एXयुमुलटे र
टर,
टर,
टर , , , डीयरे टर)
र)
भाग का नामः
िनमा?ता का नाम और पता :
Wाहक का नाम और पता :
eाइं ग सं. : िडजाइन दाब :
(क.Wा. /सै.मी.2)
भारतीय बॉयलर िविनयम 1956 को अनुपालना करते +ए भाग का अिधकतम संचािलत ................... दाब और ..............
तापमान के िलए संिनमा?ण कया गया है तथा हमारे िजमेवार ितिनिध िजनके यहां नीचे ह2ता'र दए गए ह# क उपि2थित म
.............. दन ..............को क. Wा./ सै.मी2 का संतोषजनक परी'ण कया गया था ।
हमन 2वयं का समाधान कर िलया है क ......................... का सिनमा?ण भारतीय बॉयलर िविनयम, 1950 के अनुसार +आ
है। जहां कह1 लागू ह, कए गए परी'ण के हम सा'ी ह# तथा इसम दज? िविशियां सही ह#।
2थान .....................
तारीख ....................
@प III
“ -झ
(िविनयम 4 देख)
(िड:ड एIडस एIड कवर के िविनमा
/ िविनमाण का माण प) )
भाग का नामः
िनमा?ता का नाम और पता :
Wाहक का नाम और पता :
eाइं ग सं. : िडजाइन दबावः
(क.Wा. /सै.मी.2)
हमन 2वयं का समाधान कर िलया है क ......................... का संिनमा?ण भारतीय बॉयलर िविनयम, 1950 के अनुसार +आ है। जहां
कह1 लागू ह, कए गए परी'ण के हम सा'ी है तथा इसम दज? िविशियां सही ह#।
2थान .....................
तारीख . ''।
41. उ िविनयम म प IV-क के 2थान पर िनAिलिखत प रखा जाएगा, अथा?तः-
“ @प IV -क
इ2पात िनमा?ता/िह2से िनमा?ता का नाम माणप सं. तथा तारीख ताप उपचार
7 8 9
42. उ िविनयम म प xv-क, xv-ख, xv-ग, xv-घ, xv-ङ, xv- च और xv- छ के 2थान पर िनAिलिखत प रख जायगे अथा?त् :-
@प xv-
xv-क
2. प-वहार का पता ।
5. Jया कपनी/फम? चालन के िलए 2तािवत देश म रिज2Qीकृ त ह# ? यद, हां, तो कृ पया उनका !यौरा दे ।
6. Jया आपक कोई अ<य शाखा या सहबY काया?लय भी है? यद, हां तो कृ पया उनका नाम और पता द ।
7. Jया कपनी/फम? भारतीय या अ<त?राtीय सcहताZ और मानक के अधीन िनरी'ण ािधकारी के प म काय? कर रह1 है ? यद हां
तो उसका !यौरा ।
8. भारतीय बाँयलर िविनयम,1950 के अधीन िनरी'ण ािधकारी के प म मा<यता के नवीकरण क दशा म, Jया आपने िपछले पांच
वषy म िनरी'ण कया था ? यद हां तो उसका !यौरा ।
9. Jया कपनी/भारतीय या अ<तराtीय सिहताZ और मानक के अधीन िनरी'ण, माणीकरण और संबिधत aयाकलाप से िभ4
कसी वािणिMयक aयाकलाप म भी अ<त?िविलत है ? यद हां तो उसका !यौरा ।
10. कृ पया उन बायलर के काय?शील दाब के कार, आकार और uेणी बताएं िजनका आपने कसी िन6र'ण ािधकारी के प म
िविनमा?ण के दौरान िनरी'ण कया है,। आपके ारा दी गई सेवाZ के वग? को भी बता, अथा?त् :-
(क) कृ पया िविनमा?ण क उन िविभ4 अव2थाZ का नाम बताएं िजन पर िनरी'ण कया गया है ।
11. आपके िनयोजन म आपके पास कतने िनरी'क/स'म ि ह# ? कृ पया उन िय ारा धा6रत अह?ताZ का िववरण द ।
12. Jया आपके पास बायलर के िविनमा?ण के संबध म अपेि'त सभी िवनाशक और अिवनाशक परी'ण हेतु अपनी कोई परी'ण
योगशाला है ? यद है तो उसका !यौरा ।
13. Jया आपके पास 2वयं का िडजाईन और eाइंग काया?लय है, यद है तो उसका !यौरा ।
14. Jया आपके पास भारतीय बायलर िविनयम,1950 क अपे'ाZ अनुसार िनरी'ण को पूरा करने के िलए 2थािपत द2तावेजीकृ त
गुणव@ा काय?aम है? यद है तो उसका !यौरा ।
15. Jया आपके पास िनरी'ण और माणीकरण काय? के िलए सगंठन म िनयोिजत सभी िनरी'क और स'म ियो का बायोडेटा है?
16. Jया आपके पास िनरी'क /स'म िय के िलए िश'ण काय?aम है ? यद है तो उसका !यौरा ।
17. Jया आप बायलर, इकोनोमाइजर और उनके उपसाधन के िनरी'ण काय? को भारतीय बायलर के अनुसार कठोरता से करने के
िलए तैयार है ?
40 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
18. Jया आप, आपके ारा जारी माणप के िलए पूण? िजमेदारी 2वीकार करने के िलए तैयार ह# ।
19. Jया कसी ािधकारी ारा आपक िनरी'ण ािधकारी के प म मा<यता क ाथ?ना को अ2वीकार कर दया गया ह#/यद हां तो
कृ पया उसका !यौरा द ।
20. Jया आप उन उpपाद के िलए िजनका आपने िनरी'ण कया है भारतीय बायलर िविनयम के प म माण- जारी करने के िलए
तैयार ह# ?
21. Jया आप इस बात से िभl ह# क मा<यता क अविध के वल पांच वष? है नवीन िनधा?रण पर pयेक पांच वष? के पात नवीकरण
कया जाता है ?
ह2ता'र और मुहर
@प xv-
xv-ख
11. Jया कपनी/फम? भारतीय बायलर िविनयम क अपे'ाZ के अनुसार परी'ण करने के िलए तैयार है ?
12. फस क रकम िजसे कपनी/फम? परी'ण संचािलत करने का माणप जारी करने के िलए, अयथ से भा6रत करे गी िनAिलिखत
शीषN के अधीन आकलन दए जाएं:-
13. Jया कपनी/फम? आई.बी.आर िविनयम, 1950 क अपे'ाZ के अनुसार िनरी'ण और वेdडर को माणप जारी करने के िलए
तैयार ह# ?
14. Jया कपनी/फम? उसके ारा जारी माणप क पूरी िजमेदारी लेने के िलए तैयार ह# ।
15. Jया आप इस बात से िभl ह# क मा<यता क अविध के वल 5 वष? है िजसका नए िनधा?रण पर pयेक पांच वष? के पात नवीकरण
कया जाता है।
ह2ता'र और मुहर
@प xv-
xv-ग
8. िविभ4 राtीय और अ<तरा?tीय मानक, िजनके अनुसार इ2पात उpपादन का िविनमा?ण कया गया है।
12. Jया फम?/कपनी ारा कए गए परी'ण, देश के अ<य संगठन को 2वीकाय? ह# ? यद हाँ तो कसके ारा ?
13. Jया फम?/कपनी भारतीय बायलर िविनयम, 1950 के अनुसार परी'ण करने के िलए तैयार ह# ?
14. Jया फम?/कपनी कसी और देश म भी "िवgयात इ2पात िनमा?ता" के प म मा<यता ा: ह# ?
15. Jया फम?/कपनी को कसी मा<यता ा: िन6र'ण ािधकारी के िनरी'ण के अधीन भारतीय बायलर िविनयम के उपबंध के अनुसार
इ2पात उpपादन का पूव? अनुभव है ? यद ह# तो उसका !यौरा?
16. Jया फम? भारतीय बायलर िविनयम, 1950 के उपबंध के अधीन माणप 2तुत करने के िलए तैयार है।
17. मा<यता के नवीकरण क दशा म, Jया आपने िपछले पांच वषy क अविध म भारतीय बॉयलर अिधिनयम, 1950 के अधीन िवgयात
इ2पात िनमा?ता के प म इ2पात का िविनमा?ण और दाय कया है यद ह# तो उसका !यौरा ?
18. Jया फम?/कपनी को अय2क या अय2क और 2aै प या के वल 2aै प से इ2पात का िविनमा?ण करती है ।
42 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
19. Jया फम? बोड? ारा िनयु क गई तीन सद2य क टीम को अपनी िविनमा?ण aया और 2वयं क परी'ण सुिवधाएं, दशा?ने के
िलए तैयार ह# ।
20. Jया आप इस बात से िभl ह# क मा<यता क अविध के वल पांच वष? ह# िजसका नए िनधा?रण पर pयेक पांच वष? के पात नवीकरण
कया जाता है ।
ह2ता'र और मुहर
@प xv-
xv-घ
िवBयात फाउं
फाउं *ी भ]ी @प म9
/ के अिधसूिचत होने के िलए के ीय बॉयलर बोड मायता ाP
से करने के िलए फाउं
फाउं *ी भ]ी :वािमय Zारा
/ के
2. संकम? का पता
13. Jया फम?/कपनी ारा कए गए परी'ण देश के अ<य संगठन को भी अपने आप म 2वीकाय? है ? यद हां तो कसके ारा 2वीकाय? है।
14. Jया फम?/कपनी भारतीय बायलर िविनयम, 1950 के अनुसार परी'ण के िलए तैयार ह# ।
15. Jया फम?/कपनी को कसी और देश म भी िवgयात फाउं eी/भwी के प म मा<यता ा: ह# ?
16. Jया फम? भारतीय बायलर िविनयम, 1950 क <यूनतम अपे'ाZ को पूरा करने के िलए कसी भी राtीय/अ<तरा?tीय िविशिPटय के
अनुसार ढलाई/गढाई का काय? करने क ि2थित है ।
17. Jया फम? के पास कसी मा<यता ा: िनरी'ण िधकरण के अधीन भारतीय बायलर िविनयम के उपबंध के अनुसार ढलाई/गढ़ाई का
काय? करने का पूव? अनुभव है ।
18. Jया फम? भारतीय बायलर िविनयम, 1950 के उपबंध के अधीन माणप 2तुत करने के िलए तैयार ह# ।
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 43
19. मा<यता के नवीकरण क दशा म, Jया आपने िपछले 5 वष? अविध म भारतीय बायलर अिधिनयम, 1950 के अधीन िवgयात
फाउं eी/भwी के प म/गढ़ाई/ढलाई का िविनमा?ण और दाय कया ह# । यद हां तो उसका !यौरा ।
20. Jया फम? के =ीय बॉयलर बोड? ारा िनयु क गई तीन सद2य के दल को अपनी िविनमा?ण aया और 2वयं क परी'ण सुिवधाएं
उपदशत करने के िलए सहमत ह#।
21. Jया आप इस बात से िभl ह# क मा<यता क अविध के वल पांच वष? है िजसका नए िनधा?रण पर pयेक पांच वष? के पात नवीकरण
कया जाता है ।
ह2ता'र और मुहर
@प xv-
xv-(ड)
िवBया
' त टय़ूब/पाइप िनमाता Zारा @प म9 के ीय
' के बॉयलर बोड मायता ाP
से करने के िलए 2ूब
/पाईप िनमाता Zारा उ[र देने के
िलए\ावली ।
2. संकम? का पता
4. bूब/पाइप क उpपादन 'मता और िपछले तीन वष? क अविध म ितवष? टनधा6रता का िववरण
8. (क) Jया फम? की सामWी का उpपादन तैयार करती है या की सामWी खरीदती है ।
(ख) यद की सामWी खरीदी गई है तो िपछले तीन वष? म खरीद का !यौरा द ।
9. यद खरीद 8(ख)(ii) अनुसार क गई है तो Jया का परी'ण भारतीय बायलर िविनयम के अधीन bूब िनमा?ता/ पाइप िनमा?ता के
प6रसर म कया गया है ।
10. यद फम?/कपनी की सामWी तैयार करती है तो बताएं क Jया फम? को भारतीय बायलर िविनयम के अधीन िवgयात इ2पात
िनमा?ता के प म मा<यता ा: है ।
13. टयूब/ पाइप पर कए गए परी'ण के कार (फम? के गुणवता िनयंण और कामक के िनरी'ण सिहत की सामWी अव2था तक
पूण? गुणवता िनयंण योजना संल कर ) ।
44 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
15. Jया फम?/कपनी/bूब/पाइपो का िविनमा?ण करने क ि2थित म है और वह भारतीय बायलर िविनयम, 1950 के उपबंध के अनुसार
अपनी आवHयक परी'ण सुिवधाएं भी उपल!ध कराती है ।
16. Jया फम?/कपनी को कसी मा<यता ा: िनरी'ण ािधकारी के िनरी'ण के अधीन भारतीय बायलर िविनयम के उपबंध के अनुसार
bूबो/पाईप के उpपादन का िपछला अनुभव है। यद हां तो उसका िववरण ।
17. Jया फम?/ कपनी भारतीय बायलर िविनयम, 1950, के उपबंध के अधीन माणप 2तुत करने को तैयार है ।
18. मा<यता के नवीकरण क दशा म, Jया आपने िपछले पांच वष? क अविध म भारतीय बॉयलर अिधिनयम,1950 के अधीन सुिवgयात
bूब/पाईप िनमा?ता के प bूबो /पाइप के िविनमा?ण और दाय कया है ?
20. Jया फम? इस बात से सहमत है क बोड? ारा िनयु तीन सद2य के दल को िविनमा?ण aया और 2वयं क सुिवधाएं दशा?एगी।
21. Jया फम? इस बात से िभl है क मा<यता क अविध के वल पांच वष? है िजसका नए िनधा?रण पर pयेक पांच वष? क अविध के पात
नवीकरण कया जाता है ।
ह2ता'र और मुहर
@प xv-
xv-(च)
[िविनयम 4 क (2)देख ]
10. Jया आप भारतीय बॉयलर िविनयम, 1950 क अपे'ाZ के अनुसार कठोरता से नमून का परी'ण करने के िलए तैयार है ?
11. Jया कसी ािधकारी ारा अनुमोदत योगशालाZ के प म मा<यता ा: करने का आपका अनुरोध अ2वीकृ त कया गया है। यद
हां तो !यौरा द ।
12. Jया आप भारतीय बॉयलर िविनयम के प उस उpपाद का माणप जारी करने के िलए तैयार है िजसका आप ने परी'ण कया
है।
13. Jया आपको कसी मा<यता ा: िनरी'ण ािधकारी के िनरी'ण के अधीन भारतीय बायलर िविनयम के उपबंध के अनुसार
परी'ण करने का पूव? अनुभव है । यद हां तो उसका !यौरा द ।
14. मा<यता के नवीकरण क दशा म, Jया आपने िपछले पांच वष? क अविध म भारतीय बॉयलर अिधिनयम,1950 के उपबंध के अधीन
परी'ण कये ह# । यद हां तो उसका !यौरा द ।
15. Jया आप बोड? ारा िनयु कए गए तीन सद2य के दल को अपनी योगशाला और उसक सुिवधाएं दशा?ने के िलए सहमत है ?
16. Jया आप इस बात से िभl ह# क मा<यता के वल पांच वष? क अविध तक ही है िजसका नवीकरण नए िनधा?रण पर पांच वष? के िलए
कया जाता है ।
ह2ता'र और मुहर
@प xv-
xv-(छ)
6. आपक फम? बायलर और बॉयलर के िह2स शेष जीवन मूdयांकन के िलए कब से काय? कर रही है ।
10. Jया आप भारतीय बॉयलर िविनयम, 1950 क अपे'ाZ के अनुसार कठोरता से नमून के परी'ण के िलए तैयार है ।
11. Jया अनुमोदत संगठन के प म मा<यता लेने के िलए आपका अनुरोध कसी ािधकारी ारा अ2वीकृ त कर दया गया है, यद हां तो
उसका !यौरा द ।
46 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
12. Jया आप भारतीय बॉयलर िविनयम, 1950 के प म िसफा6रश कए गए परी'ण के माणप जारी करने के िलए तैयार ह# ?
13. मा<यता के नवीकरण क दशा म, Jया आपने िपछले पांच वष? के दौरान बॉयलर और बॉयलर के िह2स का शेष जीवन मूdयांकन
कया है। यद हां, तो उसका !यौरा द ।
14. Jया आप बोड? ारा िनयु कए गए तीन सद2य के दल को अपनी योगशाला और उसक सुिवधाएं दशा?ने के िलए सहमत है ?
15. Jया आप इस बात से िभl ह# क मा<यता के वल पांच वष? क अविध के िलए वैध है िजसका िनधा?रण नए िनधा?रण पर पांच वष? के
िलए कया जाता है ।
ह2ता'र और मुहर
रा`ीय तीक
aम सं. फाईल सं.
मैसस? --------------------------
---------------------------
----------------------------
----------------------------
क िनरी'ण और गुणवता बंध पYित का मूdयांकन क =ीय बॉयलर बोड? ारा कया गया है और भारतीय िविनयम, 1950 के िविनयम,
4ग(2) के अधीन ------------------------------ म संचालन के िलए िनरी'ण ािधकारी के प मे मा<यता दी गई है ।
माणप संgया------------------------------------
सिचव
@प XVI - (ख)
रा`ी तीक
य
मैसस? --------------------------
---------------------------
----------------------------
----------------------------
क वैdडर णाली का िनरी'ण के =ीय बॉयलर बोड? ारा कया गया है और भारतीय बॉयलर िविनयम 1950 के िविनयम 4ग के अधीन,-
-------------------------------------------
----------- म संचालन के िलए स'म ािधकारी के प म मा<यता दान क गई है ।
यह माणप पांच वष? के िलए आथा?त् ------------------ तक वैध है ।
वैधता भारतीय बॉयलर िविनयम, 1950 के उपबंध के अधीन गुणवpता िनयंण का पालन करने क शत? के अधीन है ।
जारी करने क तारीख-----------------
माणप संgया.-------------
सिचव
@प XVI (ग
(ग)
राtीय तीक
aम सं. फाईल सं.
मैसस? --------------------------
---------------------------
----------------------------
----------------------------
क गुणवता बंध सिमित का िनरी'ण और मूdयांकन के =ीय बॉयलर बोड? ारा कया गया है और भारतीय बॉयलर िविनयम, 1950 के
िविनयम 4ग (2) के अधीन, अपने कारखाने हेतु जो----------
----------------------------
-----------------------------
------------------------------------ पर है................................ के िविनमा?ण के िलए िवgयात इ2पात िनमा?ता के प म मा<यता दी
गई है ।
48 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वैधता भारतीय बॉयलर िविनयम, 1950 के उपबंध के अधीन िविहत िनमा?ण गुणवpता का पालन करने क शत? के अधीन है ।
जारी करने का तारीख-------------
@प XVI (घ
(घ)
राtीय तीक
aम सं. फाईल सं.
मैसस? --------------------------
---------------------------
----------------------------
----------------------------
का िनरी'ण और गुणवpता का बंधन पYित का मूdयांकन के =ीय बॉयलर बोड? ारा कया गया है और भारतीय बॉयलर िविनयम
1950 के िविनयम 4ग (2) के अधीन अपने कारखाने, जो,--------------------------------- पर है, हेतु ------------------------- के िविनमा?ण
के िलए िवgयात फांउeी के प म मा<यता दी गई है ।
वैधता भारतीय बॉयलर िविनयम, 1950 के उपबंध के अधीन िविहत गुणवpता िनयंण का पालन करने क शत? के अधीन है ।
जारी करने का तारीख-------------
माणप संgया ----------------------
सिचव
@प XVI (ङ
(ङ)
राtीय तीक
aम सं. फाईल सं.
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 49
वैधता भारतीय बॉयलर िविनयम के उपबंध के अधीन गुणव@ा िनयंण का पालन करने क शत? है।
जारी करने क तारीख-------------
@प XVI-
XVI-च
राtीय तीक
aम सं. फाईल सं.
के ीय
ीय बॉयलर बोड
Bयात
िवयात 2ूब aनमाता के िलए अनुमोदन माणप)
यह मािणत कया जाता है क :
मैसस? .....................................
.....................................
.....................................
क िनरी'ण और गुणवpता बंध णाली का मूdयांकन के <=ीय बॉयलर बोड? ारा कया गया और भारतीय बॉयलर िविनयम, 1950 के
िविनयम 4ग(2) के अधीन.................................. म उनके कारखाना को.......................... से ............................ आकार तक क
bूब के िविनमा?ण के िवgयात bूब िनमा?ता के प म मा<यता दी गई है ।
सिचव
50 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
@प XVI-
XVI-छ
राtीय तीक
aम सं. फाइल सं.
के ीय
ीय बॉयलर बोड
Bयात
िवयात पाइप िनमाता के अनुमोदन के िलए माणप)
यह मािणत कया जाता है क
मैसस? .....................................
.....................................
.....................................
का िनरी'ण और गुणवpता बंध पYित का मूdयांकन के <=ीय बॉयलर बोड? ारा कया गया और भारतीय बॉयलर िविनयम,1950 के
िविनयम 4ग(2) के अधीन.........................म उनके कारखाने को .............................. से ........................... आकार तक के पाइप
के िविनमा?ण के िवgयात पाइप िनमा?ता के प मे क मा<यता दी गई है ।
सिचव
@प XVI-
XVI-ज
6ट[पणः- मा<यता भारतीय बॉयलर िविनयम, 1950 के उपबंध के अधीन िविन7द मानक के अनुसार होगी ।
सिचव
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 51
@प XVI-
XVI-झ
राtीय तीक
aम सं. फाइल सं.
के ीय
ीय बॉयलर बोड
शेष (रे म नेट जीवन िनधारण संगठन के @प म9 अनुमोदन का माणप)
)
यह मािणत कया जाता है क िनAिलिखत फम? का िनरी'ण और सामWी परी'ण पYित का मूdयांकन करने के पHचात्,
के <=ीय बॉयलर बोड? ारा भारतीय बॉयलर िविनयम, 1950 के िविनयम 4 ग के उप िविनयम (2) के अधीन िवgयात शेष (रे मने<ट)
जीवन मूdयांकन संगठन के प म मा<यता दी गई है ।
मैसस? .....................................
.....................................
.....................................
सिचव"
44.
44. उ िविनयम म प XVII म शीष?क “लघु उVोग बांयलर के िलए उpपादन एवं परी'ण प” से शीष? के 2थान पर िनAिलिखत
शीष? रखा जाएगा ।
“लघु उVोग बॉयलर सिहत लघु उVोग सौर बॉयलर के िलए उpपादन एवं परी'ण माण प”
45.
45. उ िविनयम म, प XVIII के 2थान पर िनAिलिखत प रखा जाएगा, अथा?त् —
@प
'' XVIII
4. फम? ारा अिधकतम काय?शील दाब, तापमान और इ2तेमाल क गई सामिWय को िन7द करते +ए, पहले कए गए कायy क
क2म, द2तावेजी साय सिहत
5. (क) Jया फम? को कसी बॉयलर िनदेशालय/िनरी'णालय
ारा कभी कोई 2वीकृ ित दी गई है ? यद हां, तो कृ पया
!यौर द ।
(ख) Jया भारतीय बायलर िविनयम के अधीन मरमत कता?
को प म मा<यता के िलए आपका आवेदन कभी कसी
ािधकरण ारा अ2वीकृ त कया गया है ?
6. Jया आपके पास िविनयम 392 (5)(i) के अधीन कोई
रे िJटफायर/जनरे टर, Wाइं डर, सामा<य टू ल व टैकल, डाई
पेनीQ#ट कट, िव2तारक तथा मापने का उपकरण अथवा
कोई अ<य औजार व टै कल ह# ?
7. तकनीक कामक जो फम? म 2थाई प से िनयोिजत ह#, क
उनके पदनाम, शै'िणक अह?ताZ तथा सुसंगत अनुभव
(द2तावेज क कािपयां सलं कर) के साथ िव2तृत सूची,
8. फम? ारा कतने काय?2थल का एक ही समय म उपयोग
कया जा सके गा
9. Jया फम? िविनयम के अनुप कठोरता से काय? को पूरा
करने तथा काय? का उ दजा? बनाये रखने के िलए तैयार
है ?
10. Jया फम? कये गये काय? हेतु पूण? उ@रदाियpव 2वीकार
करने के िलए तैयार है और यद आवHयक हो तो कसी
िववादा2पद मामले के िवषय म 2पीकरण देने के िलए
तैयार है ?
11. Jया फम? आवHयकता पड़ने पर समुिचत जांच माण प
सिहत यथा अपेि'त िविशिय के अनुसार सामWी क
आपूत करने क ि2थित म है ?
12. Jया फम? के पास उसक अपनी 2वयं क आंत6रक गुणव@ा
िनयंण णाली है यद हां, तो कृ पया !यौरा द ।
13. भारतीय बॉयलर िविनयम, 1950 के अधीन स'म
ािधकरण ारा जारी वत?मान माणप क ितय के
साथ िनयोिजत वैdडर क सूची ।
.टपण 1 : एक मरमतकता? के प म फम? क मा<यता दो वष? क अविध के िलए होगी। तpपात् उ<ह अपनी मा<यता क समाि: से कम
से कम दो महीने पूव? अपनी मा<यता के नवीकरण हेतु आवेदन करना होगा ।
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 53
.टपण : यद मरमतकता? जानबूझकर अथवा अनजाने म अिधिनयम या िविनयम के उपबंध का उdलंघन करने म िल: जाता है तो
2
उसक फम? को दोिषय क सूची म सूचीबY कया जायेगा, िजसक सूचना सभी राMय या संघ शािसत देश के मुgय
िनरी'क या बॉयलर िनदेशक को दी जायेगी और कसी भी ि2थित म नवीकरण नह1 कया जा सके गा ।''।
46.
46. @प XIX का संशोधन - उ िविनयम म प XIX के 2थान पर िनAािलिखत प रखा जाएगा, अथा?त् :-
@प XIX
5. ताप सतह
6. िनमा?ण का वष?
18. Jया वत?मान म अपेि'त फड पंप क संgया संतोषनक ढंग से काय?
करने क दशा म है ।
23. Jया सेhटी वाdव असेबली जाम होने से मु है जैसा क चालन के cसग
लीवर ारा सpयािपत कया गया है ।
25. Jया मेन वाPप रोक वाdव, फड चेक वाdव, !लो डाउन वाdव तथा
मा2टर ेशर गेज काय? शील दशा म है ।
27. मा2टर ेशर गेज, तापमान उपदश?क सुपर तापक अिभलेखक, उPण
तापक, कोdड रीहीट तथा मुgय वाPप लाइन के अंशाकन क अVतन
तारीख
29. िपछले बारह महीन म बॉयलर अवरोध के , उनके कारण तथा उपचार
सिहत !यौरे
35. बॉयलर को आंत6रक तथा अथवा बाहय सफाई के िलए िपछली बार कब
खोला गया था
38. Jया बॉयलर का काय?शील दाब कभी पूव? म मािणत सीमा से अिधक
+आ था ? यद कोई हो तो !यौरे द ।
42. Jया वे2ट हीट बॉयलर को छू ट दान करने के िलए क <=ीय बॉयलर बोड?
ारा िविन7द दशािनदश को पूरा कया गया है अथवा नह1 ?
महाबंधक (सृजन)
स'म ि क 6ट[पिणयां िजसने बॉयलर हाउस क जांच करके उपरो िववरण क सpयता का सpयापन कया है ।
स'म ि''।
47.
47. उ िविनयम म, प6रिश ञक के 2थान पर िनAिलिखत प6रिश रखा जाएगा, अथा?तः---
प.रिशF ञक
''
(कृ पया िविनयम 376 (चच) देख)
अ. 100 कWा./स.मी2 से अिधक के दाब पर तथा 1,00,000 घंटे तक काम कर रहे बॉयलर ।
(1) िव|qत उpपादन के िलए वाPप का सृजन करने वाले बॉयलर का जो 100 क.Wा./ समी2 अथवा 1,00,000 घंट तक काम कर रहे ह#,
जैसा क िविनयम, 390 म उपबंिधत है, पूव? िनरी'ण क तारीख से 12 माह क अविध अवसान पर िनरी'ण कया जाएगा तथा
िननिलिखत अिभलेख के िनरी'ण ारा, जो संबंिधत स'म \यिJत को वत?मान समय म लागू माणप क मा<यता समा[त होने के कम
से कम तीस दन पहले उपल!ध करा दए जाएंगे परं तु वह इस बात के ित संतुPट हो क बॉयलर को आगे 12 माह तक और काम करने
क अनुमित दी जा सकती है ।
(क) डेटा अज?न णाली (डीएएस) के आउटपुट से सुपर तापक और पुनःतापक तापमान अिनयिमतताZ के िलए संचालन डाटा ।
(ख) िपछले वषN के दौरान +ए शटडाउन का इितहास उनके कारण तथा क गई कार?वाई के साथ ।
(ग) वष? के दौरान बॉयलर दाब िह2स पर कए गए कसी अिवनाशी परी'ण के अिभलेख ।
56 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(घ) बॉयलर क आवHयकता के अनुसार उसके िलए जल क गुणवpता बनाए रखी जाए और गुणवpता के डाटा ऑनलाईन उपल!ध कराए
जाएं ।
(ड़) बॉयलर bूब असफल होने के अिभलेख (2थान, मरमत क गई/बदली गई bूब क संgया)
(2) जैसा क िविनयम, 390 म उपबंिधत है, चौबीस माह क अविध के अवसान पर संबंिधत स'म \यिJत ारा िनरी'ण कया जाएगा ।
तथािप, यद माणप दान करने क अविध के अवसान से पूव? और माणप दान करने के छ: माह बाद कसी भी समय पं=ह दन
अथवा उससे अिधक क अविध के िलए शटडाउन होता है, तो ऐसे मामले म संबंिधत स'म \यिJत को उिचत प से सूिचत कया जाएगा
ताक उJत शटडाउन क अविध के दौरान पूण? िनरी'ण क योजना बनाई जा सके ।
आ. 100 क.Wा./स.मी2 तक के दाब पर तथा 1,00,000 से अिधक घंटो क अविध से काम कर रहे वैVुत बॉयलर अथवा 25 वषN से काम
कर रहे है, जैसा लागू हो ।
(1) वैVुत उpपादन के िलए वाPप का सृज?न करने वाले बॉयलर का जो 100 क.Wा./ स.मी2 तक के दाब पर तथा 1,00,000 तक 400
सेिdसयस से अिधक पर काम कर रहे ह#, और बायॅलर जो 25 वषN से 400 सैिdसयस मे कम पर काम कर रहे ह#, संबंिधत स'म \यिJत
ारा फटनेस माणप ा[त होने क तारीख से बारह माह क अविध समा[त होने पर िविनयम 390 म दी गई aया के अनुसार
िनरी'ण कया जाएगा और पैरा ''क'' म दए गए चालन अिभलेख से संतुPट हो जाने पर, उ<ह बारह माह क अविध तक और काम करने
क अनुमित दान क जाएगी ।
(2) जैसा क िविनयम 390 म उपबंिधत है, चौबीस माह क अविध के अवासन पर संबंिधत स'म \यिJत ारा िनरी'ण कया जाएगा ।
तथािप यद माणन क अविध समा[त होने के पहले तथा माणन के छ:माह बाद कसी भी समय पं=ह दन अथवा उससे अिधक समय
के िलए शटडाउन होता है, तो इसके िवषय म स'म अिधकारी को उिचत प से सूिचत कया जाएगा, ताक उJत शटडाउन क अविध के
दौरान िनरी'ण क योजना बनाई जा सके ।
इ. वैVुत बॉयलर जो 100 क.Wा./समी2 तक के दाब पर तथा 1,00,000 से अिधक घंटो क अविध से काम कर रहे ह# ।
(1) वैVुत उpपादन के िलए वाPप का सृजन करने वाले बॉयलर का जो 100 क.Wा./ समी2 तक के दाब पर तथा 1,00,000 से अिधक
घंटो क अविध से काम कर रहे ह# जैसा क िविनयम 390 म उपबंिधत है । ितवष? राMय म स'म अिधकारी के समाधान प से
िनरी'ण जारी रहेगा । तथािप, यद रेमनट लाइफ असेसमट (आरएलए) इस िविनयम म दए गए उपबंध के अनुसार, बायॅलर पर कया
जाता ह# और यद संतोषद पाया जाता है, तो उपरोJत पैराWाफ ''क'' के अनुसार aया लागू होगी ।
(2) जैसा क िविनयम 390 म उपबंिधत है, चौबीस माह के अवसान पर संबंिधत स'म \यिJत ारा िनरी'ण कया जाएगा। तथािप,
यद दान करने क अविध समा[त होने के पहले तथा माणप दान करने के छ:माह बाद कसी भी समय पं=ह दन अथवा उससे
अिधक समय के िलए ।
ई. जैसा क िविनयम 390 म उपबंिधत है, चौबीस माह क अविध के अवसान पर संबंिधत स'म \यिJत ारा िनरी'ण कया जाएगा ।
(1) बॉयलर जो 100 क.Wा./ समी2 तक के दाब पर तथा 1,00,000 से अिधक घंटो क अविध से 400 सै. से कम पर िजन बॉयलर ने 25
वष? काम कया है जैसा क िविनयम 390 म उपबंिधत है, ितवष? उन पर िनरी'ण जारी रहेगा । तथािप यद रे मनट लाइफ असेसमट
(आरएलए) इस िविनयम म दए गए उपबंध के अनुसार बॉयलर पर कया जाता है और यद संतोषद पाया जाता है तो उपरोJत पैरा
''ख'' के अनुसार aया लागू होगी ।
(2) तथािप यद दान करने क अविध समा[त होने के पहले तथा माणन के छ:माह बाद कसी भी समय पं=ह दन अथवा उससे अिधक
समय के िलए शटडाउन होता है, तो इसके िवषय म स'म अिधकारी को उिचत प से सूिचत कया जाएगा, ताक उJत शटडाउन क
अविध के दौरान िनरी'ण क योजना बनाई जा सके । शटडाउन क योजना है, तो स'म अिधकारी क उिचत प से सूिचत कया
जाएगा ताक उJत शटडाउन क अविध के दौरान िनरी'ण जारी रखा जाएगा ।
.टपण : जहां कह1 'उ दबाव (एचपी) और िनA दबाव (एलपी) बॉयलर एक ही आदते से काय? कर रहे ह#, एचपी बॉयलर के िनरी'ण
पर लागू होने वाली aया एलपी बॉयलर पर भी लागू होगी ।''।
48.
48. प.रिशF
-ञख का संशोधन -- उ िविनयम म प6रिश-ञख के 2थान पर िनAिलिखत प6रिश रखा जाए, अथा?त् :-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 57
परिश
'' -ञख
अ. वे ट हीट बॉयलर (फायरड)/ को-बॉयलर जो 50 क०ा०/समी2 तक के दाब पर और 20 वष तक क अविध से काम कर
(1) वे ट हीट बॉयलर (द.ध) सह-बॉयलर जो 50 क०ा०/समी2 तक के दाब पर और 20 वष तक क अविध से काम कर
रहे ह, िजनका केवल %या संयं' म लगातार उपयोग +आ है का पूण िनरी2ण क तारीख से 12 माह क अविध के अवसान
पर और चौबीस माह पर जैसा क िविनयम 390 म उपबंिधत %या के अनुसार िनरी2ण कया जाएगा और रा6य म
संबंिधत स2म 7ि8 9ारा फटनेस माणप' जारी कया जाएगा तथा #प xix म स<यक #प से आवेदन के साथ चालन
अिभलेख? से संत@
ु होने पर अितAर8 12 माह क अविध के िलए काय करने के िलए अनुाB करे गा देगा :--
(क) डेटा एCवीजीशन िस टम (डी एएस) के आऊटपूट से सुपर तापक और पुनःतापक तापमान अिनयिमतताG के िलए
संचालन डाटा ।
(ख) िपछले वषI के दौरान +ए शटडाउन का इितहास उनके कारण? तथा क गई कार वाई के साथ ।
(ग) वष के दौरान बॉयलर दाब िह स? पर कए गए कसी भी अिवनाशी परी2ण के अिभलेख ।
(घ) ऐसे बॉयलर क अपे2ानुसार उसके िलए जल क गुणवOा बनाए रखी जाएगी और गुणवOा के डाटा आनलाइन
(ङ) बॉयलर क Qूब असफल होने के अिभलेख ( थान, मर<मत क गई/बदली गई टयूब? क संRया)
(2) जैसा क िविनयम 390 म उपबंिधत है, छOीस महीन? के अवसान पर स2म 7ि8 9ारा िनरी2ण कया जाएगा। तथािप
यद माणप' दान करने क अविध समाB होने के पहले और माणप' दान करने के छः माह बाद कसी भी समय पंSह
दन अथवा उससे अिधक के िलए शटडाउन होता है, तो स2म 7ि8 को इसक उिचत #प से सूचना दी जानी चािहए, ताक
आ. वे ट हीट बॉयलर (अद.ध)/ सह-बॉयलर जो 50 क०ा०/समी2 तक के दाब पर और 20 वष तक क अविध से काम कर
(1) वे ट हीट बॉयलर (अद.ध) को बॉयलर जो 50 क०ा०/समी2 तक के दाब पर और 20 वष तक क अविध से काम कर
रहे ह, िजनका केवल %या संयं' म लगातार उपयोग +आ है का पूण िनरी2ण क तारीख से चौबीस माह क अविध के
अवासन पर और चौबीस माह पर जैसा क िविनयम 390 म उपबंिधत %या के अनुसार िनरी2ण कया जाएगा और रा6य
म संबंिधत स2म 7ि8 9ारा फटनेस माणप' जारी कया जाएगा तथा पैरा ''क'' म दए गए चालन अिभलेख से संतुषट
्
हो जाने पर, उ"ह बारह माह क अविध तक और काम करने क अनुमित दान क जाएगी ।
(2) जैसा क िविनयम 390 म उपबंिधत है, अड़तालीस महीन? के अवसान पर स2म 7ि8 9ारा िनरी2ण कया जाएगा।
तथािप यद माणप' दान करने क अविध समाB होने के पहले और माणप' दान करने के छः माह बाद कसी भी
समय पंSह दन अथवा उससे अिधक के िलए शटडाउन होता है, तो स2म 7ि8 को इसक उिचत #प से सूचना दी जानी
इ. वे ट हीट बॉयलर (द.ध और अद.ध)/ को-बॉयलर जो 50 क०ा०/समी2 तक के दाब पर और 20 वष तक क अविध से
रा6य के स2म 7ि8 9ारा िविनयम 390 म उपबंिधत %या के अनुसार िनरी2ण के अधीन रहते +ए बॉयलर जो 50
क०ा०/समी2 तक के दाब पर और 20 वष तक क अविध से काम कर रहे ह, काय करते रहगे । यVिप यद बायलर का शेष
जीवन िनधारण इन िविनयम? के अनुसार कया जाता है और यद समाधानद पाया जाता है तब उपर पैरा 'अ' या पैरा 'आ'
ई. केपAटव बॉयलर वे ट हीट बॉयलर (फायरड) एचआरएसजी जो 50 क०ा०/ समी2 के दबाब पर और 20 वष तक क
(1) कैिWटव वे ट हीट बॉयलर (द.ध) एचआरएसजी जो 50 क०ा०/समी2 या अिधक के दाब पर और 20 वष तक क अविध
से काम कर रहे ह, िजनका केवल %या संयं' म लगातार उपयोग +आ है का पूण िनरी2ण क तारीख से 12 माह क अविध
के अवासन पर और 24 माह पर जैसा क िविनयम 390 म उपबंिधत %या के अनुसार िनरी2ण कया जाएगा और रा6य म
संबंिधत स2म 7ि8 9ारा िनXिलिखत अिभलेख? के िनरी2ण के माYयम से िज"ह #प XIX म आवेदन के साथ स<यक #प
से भर कर संबंिधत स2म को चालन माणप' क कालाविध के अवसान से कम से कम 30 दन पूव उपलPध कराया
जाएगा फटनेस माणप' जारी कया जाएगा Zकतु यह क उसके संतु@ होने पर क बायलर को अितAर8 12 माह क
(क) डेटा एCवीजीशन िस टम (डीएएस) के आऊपुट से सुपर तापक और पुनःतापक तापमान अिनयिमतताG के िलए संचालन
डाटा ।
(ख) िपछले वषI के दौरान +ए शटडाउन का इितहास उनके कारण? तथा क गई कार वाई के साथ ।
(ग) वष के दौरान बॉयलर दाब िह स? पर कए गए कसी भी अिवनाशी परी2ण के अिभलेख ।
(घ) ऐसे बॉयलर क अपे2ानुसार उसके िलए जल क गुणवOा बनाए रखी जाएगी और गुणवOा के डाटा
(ड़) बॉयलर क Qूब के असफल होने के अिभलेख ( थान, मर<मत क गई/बदली गई टयूब? क संRया)
(2) जैसा क िविनयम 390 म उपबंिधत है, छOीस महीन? के अवसान पर स2म 7ि8 9ारा िनरी2ण कया जाएगा। तथािप
यद माणप' दान करने क अविध समाB होने के पहले और माणप' दान करने के छः माह बाद कसी भी समय पंSह
दन अथवा उससे अिधक के िलए शटडाउन होता है, तो स2म 7ि8 को इसक उिचत #प से सूचना दी जानी चािहए, ताक
उ. केपAटव बॉयलर वे ट हीट बॉयलर (फायरड) एचआरएसजी जो 50 क०ा०/ समी2 के दबाब पर और 20 वष तक क
बॉयलर जो 50 क.ा./समी2 तक के दाब पर ने 20 वष काम कया है जैसा क िविनयम 390 म उपबंिधत है, ितवष उन
पर िनरी2ण जारी रहेगा । तथािप यद शेष जीवन िनधारण (रे मनट लाइफ असेसमट) (आरएलए) इस िविनयम म दए गए
उपबंध? के अनुसार बॉयलर पर कया जाता है और यद संतोषद पाया जाता है तो उपरोCत पैरा ''ख'' के अनुसार %या
लागू होगी ।
टपण : मूल =विनयम भारत के राजपऽ मे 15 िसत*बर, 1950 को संDया का.आ. 600, 3ारा ूकािशत कए
गए थे और 17 जनवर>, 2014 को सं.का.िन. 8, 3ारा अ7Jतम संशोधन कया गया ।
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 59
(v) in the case of fusion welded drums diagram of welded repairs and temperature charts of heat-treatment shall
also be furnished and in addition, certificates in respect of yield point at service temperature (0.2 per cent
proof stress), the average stress to produce an elongation of 1 per cent (creep) in 100,000 hours and the
average and the lowest stresses to produce rupture in 100,000 hours in the material, wherever is applicable,
are to be furnished;
(vi) for tubes and pipes subject to internal pressure, a certificate giving results of tests regarding chemical
analysis, warm yield point (0.2 per cent proof stress), the average stress to produce an elongation of 1 per
cent (creep) in 100,000 hours and the average and the lowest stresses to produce rupture in 100,000 hours in
the material wherever applicable, shall be furnished.
Note : Until 33,000 hours tests are carried out by the National Metallurgical Laboratory or Corporate
Research and Development Laboratory of Bharat Heavy Electricals Limited, Hyderabad for collecting
elevated temperature data of alloy steel produced indigenously against American Society of
Mechanical Engineers (ASME) or British Standards(BS) or European Standards(EN) Code, these
grades of steel may be accepted and long time elevated temperature properties/maximum allowable
stress values given in American Society of Mechanical Engineers (ASME) or British Standards(BS) or
European Standards(EN) Code, as the case may be, used for the purpose of design:
Provided that:—
(I) a certificate is furnished by the producer of the steel to the effect that the steel has been manufactured
strictly in accordance with the technical requirements of the American Society of Mechanical Engineers
(ASME) or British Standards(BS) or European Standards(EN) Code to assure that the creep rupture
requirements are complied with;
(II) the steel maker furnishes the necessary certificate that the steel conforms to the chemical analysis,
room and elevated temperature mechanical properties given in American Society of Mechanical Engineers
(ASME) or British Standards(BS) or European Standards(EN) Code as the case may be;
(III) the short-term stress-rupture tests for 1000 hours as described below are carried out by National
Metallurgical Laboratory/steel plants for the purpose of checking whether the steel is up to the specification
and also to ensure that the steel is capable of meeting the long-term rupture stress values/maximum
allowable stress values given in American Society of Mechanical Engineers (ASME) or British
Standards(BS) or European Standards(EN) Code, as the case may be, and a certificate is given by National
Metallurgical Laboratory or steel plant to this effect;
(IV) two numbers of 1000 hour creep rupture tests shall be carried out at a temperature 50°C above the
service temperature for each grade of steel for tubing or piping or castings or plates grades; when in furnace
or in superheater zone:
Provided further that,- (A) the forging to be used in valves should be tested at 550°C for 1000 hours
and the stress to cause rupture in 1000 hours at above temperatures may be taken from the master curve
corresponding to – 20 percent line; (B) at this stress, a minimum rupture life of 1000 hours is expected and
both the samples should pass 1000 hour tests at the above stress and temperature; (C) these samples may be
selected at random by the Chief Inspector of Boilers of the respective State and the samples could be in the
form of semi-finished products, say, forged bars of about 25 mm2 which will undergo heat treatment as
prescribed by the relevant specifications;
(vii) for such boilers having a capacity of 20 tons per hour and above which are required to be assembled at site,
the mountings may be supplied separately and all boilers of capacity less than 20 tons per hour shall carry all
the mountings or fittings certificates in respective forms with details mentioned in Form III, issued at the
time of manufacture of boilers.
(d) Maker’s stamp—The boiler shall have stamp in a conspicuous place such as—
MAKER’S NAME……………………………………………………………………………………
Work’s Number…………………… Year of Make…………………… Tested to……………………
Kgs./Cm²…………………… on…………………… W.P. …………………… Kgs./Cm². ……………………
Competent Person’s or
Inspecting Authority’s Official Stamp
62 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(e) Certificates for pipes—A certificate of manufacture and test in Form III-A, signed by the maker and the Inspecting
Authority shall be furnished.
(f) Certificates for tubes—A certificate of manufacture and test in Form III-B, signed by the maker and the Inspecting
Authority shall be furnished.
Note: In case of pipes or tubes made by Well-known Pipe or Tube Makers [recognised by the Central
Boilers Board in the manner as laid down in regulations 4A to 4H] in India or other countries, material testing
including mechanical tests may be carried out by them and the particulars regarding testing of material
including mechanical tests as certified by them shall be noted in the appropriate column or paragraphs in the
certificate in Form III-A or Form III-B and in case, certificate from the “Well-known Pipe or Tube Makers” as
aforesaid is produced, such certificate may be accepted in lieu of the certificate from the Inspecting Authority
insofar as it relates to testing of material including mechanical tests specified in this form.
(g) Certificates for mountings and fittings.—A certificate of manufacture and test in Form III-C, signed by the Maker
and the Inspecting Authority in respect of boiler mountings and steam-pipe fittings during manufacture, shall be
furnished.
Note: A photostat copy of the certificate in Form III-C shall be accepted provided it is endorsed by the
manufacturer or the Inspecting Authority who has signed the original certificate.
(h) Certificate of inspection during manufacture of Headers, Desuperheaters or Attemperater, Blowdown Tank,
Feed Water Tanks, Accumulator and Dearator.—A certificate of manufacture and test in Form III-H, signed by the
maker and the Inspecting Authority shall be furnished.
(i) Certificate of inspection during manufacture of Dished Ends or End Covers.—A certificate of manufacture and
test in Form III-I, signed by the maker and the Inspecting Authority shall be furnished.”.
4. In the said regulations, for regulation 4A, the following regulation shall be substituted, namely:—
“4A. Application for recognition
(1) An application for recognition as Competent Authority, Inspecting Authority, Well-known Material Testing
Laboratory, Well-known Steel Maker, Well-known Foundry/Forge, Well-known Tube/Pipe Maker and Well-known
Remnant Life Assessment Organisation shall be made by a firm to the Secretary, Central Boilers Board, Ministry of
Commerce and Industry (Department of Industrial Policy and Promotion), New Delhi, for recognition in one of the
aforementioned areas of activity in which that firm is engaged.
(2) Application under sub-regulation (1) shall be made in duly filled in Questionnaire Form (Forms XV-A to XV-G)
applicable to the area of activity or may also be submitted on-line.
(3) Any firm applying for recognition as Competent Authority and Inspecting Authority under sub-regulation (1) shall
have a minimum experience of two years in the area of activity for which recognition is applied for. For recognition as
Well-known Material Testing Laboratory, Well-known Steel Maker, Well-known Foundry/Forge, Well-known
Tube/Pipe Maker and Well-known Remnant Life Assessment Organisation, experience of two years’ shall be as per the
provisions of these regulations.
(4) In case of firms in foreign countries seeking recognition as Well-known Steel Maker, Well-known Pipe/Tube
Maker, Well-known Foundry or Well-known Forge, a fee of US $ 10,000 (US Dollars Ten thousand only) shall be
deposited alongwith the completed Questionnaire form to meet the expenses of the visit of the Evaluation Committee.
Provided that where the firm has more than one manufacturing unit in the same country, an additional fee at the rate
of US $ 2000/- (US Dollars Two thousand only) per additional unit shall be deposited.
(5) In case of firms in foreign countries seeking recognition as Competent Authority and Inspecting Authority, a fee of
US $ 1,000 (US Dollars One thousand only) shall be deposited alongwith the completed Questionnaire forms.
(6) In case of firms in India seeking recognition under sub-regulation (1), a fee of Rupees 15,000/- (Rupees Fifteen
thousand only) shall be deposited alongwith the completed Questionnaire Form and for renewal of recognition, a fee of
rupees 10,000/- (Rupees ten thousand only) shall be deposited alongwith the completed Questionnaire Form.
(7) The Evaluation Committee shall carry out the evaluation of the manufacturing works of the firms within ninety
days of receipt of the fees in case of manufacturing works in foreign countries and within sixty days in case of
manufacturing works within the country .
Appraisal Committee or Evaluation Committee as the case may be, shall also evaluate the performance of firm’s
applying for recognition as Competent Authority or Inspecting authority within sixty days of receipt of fee.
The certificate of recognition shall be valid for a period of five years from the date of the visit of the plant by the
Evaluation Committee or meeting of Appraisal Committee, as the case may be. In the case of renewal of the recognition,
if an application is received for renewal alongwith the required fee as per this regulation, the firm may be recognised
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 63
after following the procedure laid down in these regulations and the certificate shall be issued for a further period of five
years.”.
5. In the said regulations, in regulation 4J, for sub-regulation (2), the following sub-regulation shall be substituted,
namely:—
“(2) Minimum qualifications and experience.—
(a) must be a graduate in Mechanical or Production or Power Plant or Metallurgical Engineering from a
recognised institute;
(b) minimum five years experience singly or cumulatively in the following fields related to boilers:—
(i) Design;
(ii) Manufacture;
(iii) Commissioning;
(iv) Operation and maintenance;
(v) Inspection and certification during manufacture or operation and maintenance;
(vi) High Pressure Welding—Inspection;
(c) Level-II NDT Certificates from Indian Society for Non-Destructive Testing (ISNT) or any other
professional body recognised by ISNT in Non Destructive methods of testing in radiography and
ultrasonic testing.”.
6. In the said regulations, in regulation 4H, the opening paragraph shall be numbered as sub-regulation (1) thereof,
and after sub-regulation (1) as so numbered, the following sub-regulation shall be inserted at the end, namely:—
“(2) For recognition as Competent Authority, the Evaluation Committee shall evaluate the performance of a firm
applying for recognition as Competent Authority in accordance with the provisions of these regulations, in
particular in the following areas, namely:—
(i) the firm or company shall be a registered entity and not a sole proprietorship. For operation in India, firm
or company shall be registered in India also;
(ii) the authorised signatory responsible to issue certificate to qualified welders on behalf of the Competent
Authority shall be an employee of the Competent Authority and should be an engineer with five years’
experience in the field of welding having a degree/post graduate degree in Mechanical or Production or
Metallurgical or Welding engineering and certificate of Level-II in Radiography Techniques;
(iii) the firm or company shall have a workshop with following facilities:
(a) electric welding sets for conducting welding of the specimens;
(b) pre-heating facilities;
(c) platforms for welding;
(d) the following in-house testing machines:
(i) universal testing machine;
(ii) NDT – dye penetration tests;
(iii) machines for preparation of specimens;
(iv) hardness tester (optional);
(e) radiography, micro and macro examination of samples may be outsourced to approved agencies.
Note : For operation in India, workshop with above facilities shall be available in India also;
(v) the firm or company shall be familiar with the requirement for examination of welders under
these regulations.
(vi) an Inspecting Authority may also work as a Competent Authority for in-house certification
of welders and for this purpose it may avail the facility of an outside agency having above
facilities for testing of weld specimens for in-house certification of welders, provided it has
in-employment an authorised signatory as mentioned in item (ii) above.
Note: All the existing firms or companies recognised as Competent Authority shall continue to be so
recognised as such, till the validity period of the recognition.”.
7. In the said regulations, in regulation 4I, sub-regulation (ix) shall be omitted.
64 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
8. In the said regulations, in regulation 16, in clause (d), for the words “The minimum values of the stress”, the
following words “The maximum permissible stress shall be taken as available in governing Boiler codes of the
country of the material to which it belongs and in case of non-availability of the value, for the purpose of evaluating
the maximum permissible stress, Et, the minimum values of the stress” shall be substituted.
9. In the said regulations, in regulation 166, in clause (f), for the letters, words, symbol, brackets and figure “f =is
the maximum allowable stress of the plate at the design temperature (in N/mm2)”, the letters, words, symbol,
brackets and figure “ f is the maximum permissible stress values as available in the governing codes of the
country of the material to which it belongs (in N/mm2)” shall be substituted.
10. In the said regulations, in regulation 187, for the letter, symbol and words “f = allowable stress”, the letter,
symbol and words “ f = the maximum permissible stress values as available in the governing codes of the
country of the material to which it belongs ” shall be substituted.
11. In the said regulations, in regulation 278, for the letter, symbol and words “f = permissible stress”, the letter,
symbol and words “ f = the maximum permissible stress values as available in the governing codes of the
country of the material to which it belongs ” shall be substituted.
12. In the said regulations, in regulation 278A, in clause (f), for the letter, symbol, words, brackets and figure “f =is
the maximum allowable stress of the plate at the design temperature (in N/mm2)”, the letter, symbol, words,
brackets and figure “ f is the maximum permissible stress values as available in the governing codes of the
country of the material to which it belongs (in N/mm2)” shall be substituted.
13. In the said regulations, for regulation 281, the following regulation shall be substituted, namely:—
“281. *Requisite Mountings, Fittings and Auxiliaries
(1) Every boiler shall be provided at least with the following, namely:—
(a) two safety valves, one of which may be a high steam and low water type safety valve and in no case the
bore of the seat of the valve should be less than 19 mm (3/4");
(b) two means of indicating water level;
(c) a steam pressure gauge;
(d) a steam stop valve;
(e ) a feed check valve;
(f) one feed apparatus:
Provided that for boilers fired by gaseous, liquid or solid fuels in suspension where heating surface exceeds
20 square meters shall be provided with minimum two feed apparatus which will have a combined capacity
of not less than the maximum continuous rating of the boiler: Provided further that for other boilers where
residual heat is there even after fuel supply is cut-off, two feed apparatus each having a capacity of not less
than maximum continuous rating of the boiler shall be provided. (For boilers in battery see Regulation
336A);
(g) a blow-down cock or valve;
(h) fusible plugs as provided under regulation 331;
(i) an attachment for Competent Person’s test gauge;
(j) a manhole, where size and construction permit, and such mudholes or sightholes as are necessary for
effectively cleaning the boiler.
(2) In the case of boilers fitted with integral superheaters, an additional safety valve shall be fitted at the end of the
superheaters outlet header.
(3) In the case of boilers with no fixed steam and waterline, the fitting of such accessories that are manifestly not
needed or used, such as water gauges, water columns and gauge cocks, may not be insisted upon.
(4) In the case of automatic or semi-automatic oil-fired or gas-fired boilers, low water alarms may be fitted in
preference to fusible plugs provided such boilers are equipped with automatic tripping device to disconnect fuel
supply and to start the feed pump simultaneously in the event of low water in the boilers.
(5) In the case of a single boiler of the shell type and not connected in a battery with other boilers, the heating
surface of which does not exceed 102 m² (1100 sq. ft.), two independent sources of power supply to the two feed
apparatus will not be necessary.
(6) In the case of miniature boilers under Chapter XIV, the steam pressure gauge may be connected to the steam
space or to a steam connection to the water column by a syphon tube or equivalent device that will keep the gauge
tube filled with water and if brass or bronze composition is used, the minimum size of the syphon tube shall be
6 mm. (¼ in.) standard pipe size; for other materials the minimum inside diameter of the pipe or tube shall be 13
mm. (½ in.)
*Note: It is recommended that in Lancashire and Cornish Boilers one of the safety valves should be of a high steam and low water type. In Water Tube
and Horizontal Multi-tubular Boilers, a low water alarm directly operated by steam should be fitted. Rams-bottom type safety valves consisting of two
valves and with spring and lever in common may be considered as two safety valves for the purpose of this Regulation. In the case of Marine Type
boilers low water alarm may be fitted in place of a fusible plug.
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 65
19. In the said regulations, for regulation 381, the following regulation shall be substituted, namely:—
“381. Procedure for registration.--
(1) (a) On receipt of an application for registration under sub-section (1) of Section 7, alongwith certificates and
drawings as prescribed in regulation 4(c), the Inspector shall, when the boiler has been properly prepared for
examination proceed to inspect with a view to satisfy himself that the boiler has not suffered any damage during its
transit from the place of manufacture to the site of erection and if he is satisfied with the correctness of the maker’s
certificate and other particulars relating to the material and construction as stated therein [vide section 14(1)(c) and
regulation 4], take due account of the workmanship and details of the construction of each part;
(b) subject to any discretionary power exercised by the Chief Inspector, shall accept the permissible working
pressure of the boiler as certified by the Inspecting Authority in Form-II and Form-III and after inspecting the
boiler, the Inspector shall hydraulically test it in accordance with requirements of regulations 379 and a provisional
order under section 9 in Form V shall be issued after the hydraulic test.
(c) the Inspector shall enter the above particulars and dimensions of the boiler, together with details of the
hydraulic test, in “Memorandum of Inspection” Book(Form-I, vide Regulation 386) which, together with all the
makers’ papers for the boiler, shall be submitted to the Chief Inspector with the Inspector’s report under sub-section
(3) of Section 7 and after issue of Registry number, the inspector shall conduct steam test in accordance with
regulation 380 and enter the details of steam test in Form-I;
(d) where a certificate in Form II and a Memorandum of Inspection Book in Form I are furnished by an Inspecting
Authority in accordance with clause (c) of regulation 4, the Inspector shall, on receipt of an application for
registration under sub-section (1) of Section 7 of the Act, proceed to make such examination and measurement of
boiler as may satisfy him that the boiler is the one certified by the Inspecting Authority and carry out a thorough
examination and check the measurements to ensure the correctness of the Inspecting Authority’s certificate and that
no damage has been caused in transit.
(2) (a) The Inspector shall, if he is satisfied with the condition of the boiler, the correctness of the particulars and
approved working pressure entered in “Form-I by the Inspecting Authority, subject the boiler to hydraulic test in
accordance with regulation 379.
(b) If the Inspector is satisfied that the boiler has satisfactorily withstood the test, he shall issue a provisional order
to enable the boilers to be worked.”.
20. In the said regulations, in regulation 382, in sub-regulation (a), in the list of States and Union territories, with their
distinguishing letters, (1) for the entry “Orissa OR”, the following entry shall be substituted, namely:—
“Odisha OD”;
(2) after the entry “Tamilnadu T”, the following entry shall be inserted, namely:—
“Telangana TS” .
21. In the said regulations, for regulation 386, the following regulation shall be substituted, namely:—
“386. *Memorandum of Inspection Book.—
(a) A Memorandum of Inspection Book shall be prepared for each boiler in Form I and the Inspector shall
enter in ink all particulars and dimensions of the boilers with the particulars of hydraulic test and steam
test and his inspection notes in this book;
(b) at subsequent inspection Competent Person shall enter the dates of the inspections, hydraulic tests and
steam tests, when such are made, with their notes thereon;
(c) the Inspector or Competent Person, as the case may be, should also enter in the Memorandum of
Inspection Book the general condition of the boiler and of repairs, to what extent boilers have been
cleared of brick work, a report of all casual visits for inspection of repairs, for inspection of main steam
pipes, and reports on accidents;
(d) on submission of the Memorandum Book to the Chief Inspector, he will in the case of newly registered
boilers, check all particulars and approve of the working pressure that is to be permitted and in the case of
old boilers, the Chief Inspector shall examine the Inspector’s notes of inspection and proposals made for
repairs or reduction of pressure and a pressure once approved for the boiler should not be altered without
the written authority of the Chief Inspector.”.
22. In the said regulations, for regulation 391A, the following regulation shall be substituted, namely:—
“391A. Ageing of Boilers.—
*The Memorandum of Inspection Book should always be kept clean and up-to-date Inspection Books except when actually required by the Inspector,
should be filed in the office of the Chief Inspector.
68 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(a) Shell Type Boilers:
(i) In order to take the ageing effect on boilers, the working pressure as calculated from the
formulae in these regulations shall be reduced as per the table given below:
TABLE
Age of boiler exceeding (in years) 25 35 45 50 60 70 80 90 100
Maximum permitted working pressure per cent. 95 90 85 80 70 60 50 40 30
(ii) for those boilers, the plates of which have already been cut and tested shall be given a further
lease of life of fifty years from the date of the test of the boilers. The working pressure that shall be
allowed after the testing shall be reduced as per the table given below:
TABLE
Period after date of test (in years) 10 20 30 40 50
Maximum working pressure allowed (percentage) 90 80 70 50 30
Thickness
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)
Steam Yes Yes Yes Yes Yes No Yes Yes No Yes
Drum @ *
Water Yes Yes Yes Yes Yes No Yes Yes No Yes
Drum @ *
Bottom Yes Yes No Yes No No No Yes Yes Yes
headers
Low Yes Yes No Yes No No No Yes Yes Yes
temperature
Header
(Less than
400⁰C)
Attemperator Yes Yes No Yes Yes No No Yes Yes Yes Swell
Header measurement
Economiser Yes No No No No Yes No Yes No Yes
tubes #
Convection Yes No No No No Yes No Yes No Yes Non-
Super- # destructive
heater oxide
Coils thickness
inspection
Primary Yes No No No No Yes No Yes No Yes Non-
Super- # Destructive
heater Oxide
Coils thickness
inspection
Prefinal Yes No No No No Yes No Yes No Yes Non-
Superheater $$ # Destructive
Coils Oxide
thickness
inspection
Final Yes No No No No Yes No Yes No Yes Non-
Superheater $$ # Destructive
Coils Oxide
thickness
inspection
Reheater Yes No No No No Yes No Yes No Yes Non-
Coils $$ # Destructive
Oxide
thickness
inspection
High Yes Yes No Yes Yes No No Yes Yes Yes Swell
Temperature measurement
headers
(400⁰C &
above)
Main Yes No No No Yes No No Yes No Yes
Steam
Piping
Cold Reheat Yes No No No No No No Yes No Yes
Piping
Hot Reheat Yes No No No Yes No No Yes No Yes
Piping
SH/RH links Yes Yes No Yes Yes No No Yes No Yes
Bank Yes No No No No No No Yes No No
Tubes
Furnace Yes No No No No Yes Yes Yes No No
Water @
Walls
TABLE 2
Compo- Visual Ultra- Mag- Liquid/ Repli- Samp- Deposit Outside Fibre Hard- Others
nent sonic netic Dye cation ling Analy- Dia- Optic ness
testing particle Pene- sis metre Ins-
70 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
ins- trant and pection
pection ins- Thick-
pection ness
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)
Steam Yes Yes Yes Yes Yes No Yes Yes No No
Drum @ *
Water Yes Yes Yes Yes Yes No Yes Yes No No
Drum @ *
Econo- Yes No No No No Yes No Yes No No
miser
Coils
Convec- Yes No No No No Yes No Yes No No
tion
Super-
heater
coils
Primary Yes No No No No Yes No Yes No No
Super-
heater
coils
Final Yes No No No No Yes No Yes No No
Super-
heater
coils
Water Yes Yes No Yes No No No Yes Yes No
headers
Steam Yes Yes No Yes No No No Yes Yes No
Headers
Bank Yes No No No No No No Yes No No
Tubes
Furnace Yes No No No No Yes Yes Yes No No
Water Wall @
Main Yes No No Yes No No No Yes No No
Steam
Piping
23. In the said regulations, in regulation 392, in sub-regulation (5), for the first paragraph, the following paragraph
shall be substituted, namely:—
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 71
“(5) The Chief Inspector shall scrutinise and evaluate the application along with the replies to the
Questionnaire and after satisfying himself that the following requirements are fulfilled, shall recognise the firm
as a repairer within a period of thirty days, in the category applied for, namely:— ”.
24. In the said regulations, in regulation 520, in the Note, after the words “provision of mechanical relief device” the
words and letters “or a three way valve for bypassing H.P Heater” shall be substituted.
25. In the said regulations, in regulation 554A, in clause (f), for the letter, symbol, words, brackets and figure “f =is
the maximum allowable stress of the plate at the design temperature (in N/mm2)”, the letter, symbol, words,
brackets and figure “ f is the maximum permissible stress values as available in the governing codes of the
country of the material to which it belongs (in N/mm2)” shall be substituted.
26. In the said regulations, in regulation 561, in sub-regulation (b), for clause (iv), the following clause shall be
substituted, namely:—
“(iv) Impact Tests.—The impact test specimens are to be one of the two types and dimensions shown in Figures
21A and 21B (see regulation 263), the notch shall be contained in the weld-metal at approximately the axis of the
weld and the axis of the notch is to be perpendicular to the surface of the plate.
For the U-Notch as well as V-notch specimen at a temperature of 20 ± 2°C. In the case of V-notch specimen, the
machining of the bottom of the notch shall be done very carefully.
The choice between U-Notch and V-Notch specimen shall be at the discretion of the Inspecting Authority.
The minimum result to be obtained from the impact test pieces shall be:
Note: Above values are equivalent to 2.76 kgfm divided by sectional area below the notch.”.
27. In the said regulations, for regulation 605, the following regulation shall be substituted, namely:—
Every welder shall be duly tested within thirty days of receipt of application and qualified to the
satisfaction of the Competent Authority who shall assess his performance for qualifying for the certificate.
The Competent Authority may, thereafter issue a certificate in the Form XIII, within five days on receipt of
satisfactory test reports indicating the class and type of welding in which he has qualified.”.
28. In the said regulations, for regulation 608, the following regulation shall be substituted, namely:—
A candidate who wishes to qualify for a certificate under these regulations shall not be less than eighteen
years of age and shall have undergone a regular apprenticeship from a recognised industrial training institute or one year
welder related course from any institute recognised by a State Government or Central Government or one year regular
apprenticeship from an industrial organisation each followed by at least one year regular on job experience as a welder
in a workshop of industry.”.
29. In the said regulations, in regulation 621, in sub-regulation (c), in clause (v) in first paragraph, for the figure and
letters “ 19 mm”, the figure and letters “12.7 mm” shall be substituted.”.
30. In the said regulations, for Form I, the following form shall be substituted, namely:—
72 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
“FORM I
(See regulation 386)
MEMORANDUM OF INSPECTION BOOK
OR
REGISTRATION BOOK
GENERAL
District…………………………………………
Owner…………………………………………
Address of Factory…………………………..
CYLINDRICAL SHELL
(a) (b)
Shell or Mud Drum Steam Drum
Name of parts
Number
Length between end plates
Length between end plates seam
Diameter inside largest belt
Thickness of Plates
Number of belts of plating
Longitudinal seams
Position (o’clock)
Circumferential seams
No. of seams (end and inner)
Gusset Stay, No. F.E., top, ………… Bottom, ………….. B.E., top, ………... bottom, …………..
STAYS
Standpipe below stop valve, ……… height,…… dia. (outside) …… thickness ………..……...
Flanges ……………………………...
FIREBOX DETAILS
DETAILS OF FLUE TUBES
No. plain, Stay overall length …… specification ………..
I &II PASS TUBES
………………...
Plain, dia. (out) thickness, … Front End.,welded, expd., beaded, feruled. Smoke
………..... End.,welded Expd., beaded, or …..
Stay, dia. (out) thickness, …………. F.E.,welded, expd., beaded,, S.E,welded, Expd., ..
………......
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 75
Plain, dia. (out) ………..... thickness, … Front End.,welded, expd., beaded, feruled.
Smoke End.,welded Expd., beaded, or
Stay, dia. (out) ………...... thickness, …………. F.E.,welded, expd., beaded,,
S.E,welded, Expd., ..
Inside diameter
Plate thickness
Safety
Safety
Main. Stop
Valves etc.
Aux. Stop
Feed
Blow Down
Injector
76 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Water gauges, No. ………………………… type ………………… Test cocks No. …………………
MISCELLANEOUS FITTINGS Water gauges, top of lower nut is ………… ……………………… mm above …………………..
Pressure gauge, Type …………………….. dia.in mm … range ……… Kg/cm²
Pressure gauge, Maker …………………… No. …………. red line at …………… Kg/cm²
SAFETY VALVES
Type ………………………………
Diameter of Neck(mm)………..
Diameter of outlet(mm)……….
……………………………………..
E 1.5T
A= As = A 1 +
C.P. 1000
E= ;C= ;P= ;A=
As = ;T= ;A= ;
HEATING SURFACE
Total Heating Surface ………………………………………………Sq. m.
Boiler Rating ……………………………………………………………………………………..……
HYDRAULIC TEST (REGISTRATION)
Inspector ……………………… Date of test ……………………… Test pressure .……………… Kgs/cm²
Duration of test …………… mins. Boiler pressure, gauge No. …..…………… use at test ………………..
Boiler pressure gauge compared with ……………... on …………………… found ………………………….
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 77
Timing of test…………………………….
”.
31. In the said regulations, for Form II, the following forms shall be substituted, namely:—
“FORM II (1)
[See regulation 4(c)(i) ]
CERTIFICATE OF INSPECTION FOR SHOP ASSEMBLED BOILERS
The boiler on completion was subjected to a Hydrostatic test pressure of _____ kg/cm² (g) in the presence
of the Competent Person on _____ day of ______________ and satisfactorily withstood the test.
All welded seams were subjected to destructive and Non-Destructive examination wherever applicable and found
satisfactory.
We have satisfied ourselves that the construction and dimensions of the boiler are as shown in the Maker’s Drawing
Number _____________________________________ signed by us and that the particulars entered in Maker’s
certificate of manufacture in Form III countersigned by us are correct to the best of our knowledge and belief.
Signature of Competent Person Signature of Inspecting Authority
Date and Seal
FORM II (2)
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 79
“FORM III
[See regulation 4(c)(ii) ]
CONSTRUCTOR’S CERTIFICATE OF MANUFACTURER AND TEST
1. Description Constructor’s Name and address…………………………………………………
Manufactured by ……………………………………………………………………
Identification marks ………………………………………………………………..
Part(s) manufactured, inspected at all stages of construction by ……………… (Inspecting Authority).
Manufactured by ……………………………………………………………………
Identification marks ………………………………………………………………..
Part(s) manufactured, inspected at all stages of construction by ……………… (Inspecting Authority).
4. Construction
(a) The construction is in accordance with Chapter III/V/X/XII/XIV of the Indian Boiler Regulations.
Number of longitudinal seams in shell/drum in each belt ……………………………..
Number of longitudinal seams in furnace in each ring …………………………………
Number of circumferential seams in shell/drum ………………………………………..
(including end seams) ………………………………………………………………….
5. Details of Drums/Shells
Shell plate Tube plate Head
Hydrostatic test lbs./sp.in
Manholes No. & Size
Nomenclature
Nominal dia.
Thickness in mm
Thickness in mm
Length
No.
Type*
mm
1 2 3 4 5 6 7 8 9 10 11 12 13
7. Mountings
No. Nomenclature Material Type No. Size
8. Details of the safety valves and test results (Regulation 4 (c) (Vii)
Manufacturer ………………………………………………………………………………………….
Identification marks of valves ……………………………………………………………………….
Maker’s No. …………………………………………………………………………………………..
Type ……………………………………………………………………………………………………
Life (mm) ………………………… Drawings Nos. ………………………………………………………..
Valves details :
Material ……………………………………………………………………………………….
Valve Seat …………………………………………………………………………………….
82 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Flat/Bevel ……………………………………………………………………………………..
Diameter of valve seating ……………………………………………………………………..
Valve Body :
Material ……………………………………………………………………………………….
Opening at neck ………………………………………………………………………………..
Opening at outlet …………………………………………………………………………….
Springs:
Material ………………………………………………………………………………………..
Process of manufacture ………………………………………………………………………..
Chemical composition ……………………………………………………………………….
Dimensions :
Outside diameter of coil ……………………………………………………………………..
Section of wire ……………………………………………………………………………….
Number of coils ……………………………………………………………………………….
Free length of coils …………………………………………………………………………..
Test results :
Place of test ………………… Date …………………………………………………………
Closing down pressure ……………………………………………………………………
Remarks :
Does the valve chatter? ………………………………………………………………………..
Does the valve seat leak? ……………………………………………………………………..
Blow off pressure ………………………………………………………………………….…
Type of valve and extract of test results………………………………………………………..
Type of valve ……………………………………………………………………………….
Place of test ……………………………………………… date ……………………………
Constant ‘C’ by test results …………………………………………………………………….
Capacity of the valve for the intended blow off pressure ……………………………………..
33. In the said regulations, for Form III-A, the following form shall be substituted, namely:—
“ FORM III-A
[See regulation 4(e)]
CERTIFICATE OF MANUFACTURE AND TEST FOR PIPES
Certificate No. --------------- Date:—------
Name of part & Quantity…………………………………………………………………
Drawing No………………………………………………………………………….
Maker’s name and address…………………………………………………………..
Customer’s Name & Address……………………………………………………….
Design pressure………………Kg/cm²
Design temperature………….. ºC
RAW MATERIAL
Process of manufacture………………………………………………………………
Fully Killed/rimmed………………………………………………………………
Chemical composition…………………………………………….
Heat Number…………………………………………………………..
Size……………………………………………………………………………………
Test Certificate No. & Date………………………………………....
Name of the Steel Maker…………………………………………………………….
Name of Inspecting Authority……………………………………………………….
PIPES
Process of manufacture……………………………………………..
Main dimensions……………………………………………………………………..
Tolerances……………………………………………………………………………
Specification……………
Bend test on pipe or weld ……………………………………………………..
Flattening test………………………………………………………………………….
Other tests…………………………………………………………….
Tensile strength………………………………………………………………………..
Chemical Composition……………………………………………………………….
84 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Heat treatment………………………………………………………..
Hydraulic test…… Kg/cm²
Identification mark of Inspecting Authority/Well known pipe maker …………………….
Note:— In addition, the following information in respect of the material shall be furnished in a tabular form in
conformity with the requirements of regulation 4(c)(vi) or the note thereto, as the case may be. The
information may be given from the established test data or if the material is of standard quality an extract from
the standard may be furnished instead.
Metal 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600
temperature°C
Et
Sc
Sr
MAWP
Place _______________
Date ________________
Note (1):—This form is intended for the use of both pipe manufacturers and pipe fabricators. Only such of the
columns or paragraphs that are applicable, or information that can be obtained and furnished from
other certificates, need be filled or entered in this form.
Note (2):—-In the case of fabrications made from steel pipes obtained from elsewhere, particulars in regard to
the “material” and “pipes” shall be taken from similar forms of certificates obtained in respect of
pipes and noted in the appropriate columns or paragraphs.
Note -(3):—For Stock and sale purpose, one Form shall be issued for not more than five pipes.
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 85
In the case of pipes made from steel, made and tested by well known Steel Makers in India or other countries,
particulars regarding the ‘material’ as certified by them in Form IV shall be noted in the appropriate columns or
paragraphs of Raw material in this certificate.”.
34. In the said regulations, for Form III-B, the following form shall be substituted, namely:—
“FORM III-B
[See regulation 4(f)]
CERTIFICATE OF MANUFACTURE AND TEST FOR TUBES
Certificate No.--------------- Date:—--------
Name of part & Quantity…………………………………………………………………
Drawing No………………………………………………………………………….
Maker’s Name and Address…………………………………………………………..
Customer’s Name & Address……………………………………………………….
Design pressure……… Kg/cm²
Design temperature…….. ºC
RAW MATERIAL
Process of manufacture………………………………………………………………
Fully killed/rimmed……………………………………………
Chemical Composition……………………………….
Heat Number………………………………………..
Size…………………………………………………………………
Test Certificate No. & Date………………………………………....
Name of the Steel Maker…………………………………………………………….
Name of Inspecting Authority……………………………………………………….
TUBES
Process of manufacture………………………………………………………………
Main dimensions……………………………………………………………………..
Tolerances……………………………………………………………………………
Specification…………………………………………………………………..
Tensile strength………………………………………………………………………
Chemical Composition………………………………………………………………
Elongation percentage……………………………………………………………….
Bend test……………………………………………………………………………..
Flattening test………………………………………………………………………..
Crushing test…………………………………………………………………………
Flare test……………………………………………………………………………..
Flange test……………………………………………………………………………
Other Tests
Heat treatment………………………………………………………………………
Hydraulic test…………… Kg/cm²
Identification mark of Inspecting Authority/Well known tube maker …………………….
Note:—In addition, the following information in respect of the material shall be furnished in a tabular form in
conformity with the requirements of Regulation 4(c)(vi) or the note thereto, as the case may be. This
information may be given from the established test data or if the material is of standard quality, an extract
from the standard may be furnished instead.
86 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Metal 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600
temperature°C
Et
Sc
Sr
MAWP
Place _______________
Date ________________
NOTE (1):—This form is intended for the use of both tube manufacturers and tube fabricators. Only such of the
columns or paragraphs that are applicable, or information that can be obtained and furnished from other
certificates, need be filled or entered in this form.
NOTE (2):—In the case of fabrications made from steel tubes obtained from elsewhere, particulars in regard to the
“material” and “Tubes” shall be taken from similar forms of certificates obtained in respect of pipes and
noted in the appropriate columns or paragraphs.
NOTE-(3):—For Stock and sale purpose, one Form shall be issued for not more than ten tubes.
In the case of tubes made from steel, made and tested by well-known Steel Makers in India or other countries
particulars regarding the ‘material’ as certified by them in Form IV shall be noted in the appropriate columns or
paragraphs of Raw material in this ‘certificate.”.
35. In the said regulations, for Form III-C, the following form shall be substituted, namely:—
“FORM III-C
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 87
“FORM III-G
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 89
Heat Number
Chemical composition
Heat treatment
(iii) Elongation
Certified that the particulars entered herein by us are correct. This satisfies the requirements of Indian Boiler
Regulations, 1950.
40. In the said regulations, after Form III-G, the following forms shall be inserted, namely:—
“FORM III-H
(See regulation 4)
CERTIFICATE OF MANUFACTURE AND TEST FOR
(HEADERS,DESUPERHEATERS/ATTEMPERATOR,BLOWDOWNTANK,FEEDWATERTANKS,
ACCUMULATOR, DEAERATOR)
T.C.NO.: DATE :
Name of the Part :
Maker's Name & Address :
Customer's Name & Address :
Drawing No. : Design Pressure (Kg/cm²) :
Process of Manufacture, Material : Design Temp. (ºC) :
90 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
condition, chemical composition, Tensile Refer enclosed Raw material Heat Treatment :
Strength, Tolerances, Test Certificates or Form IV-A
in lieu of Raw material Test Hydraulic Test Pressure :
Bend Test, Flattening Test etc. Certificates
Non-destructive Testing :
Item
PART NAME MATERIAL SIZE QUANTITY MELT No.
No.
01 PIPE
02 END COVER
03 STUBS
04 BRANCH PIPES
05
06
The parts have been constructed to comply with the Indian Boiler Regulations for a working pressure of --------- and
temperature of ----------and satisfactorily withstood a water test of -- on the -- day of -- in the presence of our
responsible representative whose signature is appended hereunder.
Final Inspection Date :
Place :
Date :.
“FORM III- I
( See regulation 4)
CERTIFICATE OF MANUFACTURE AND TEST FOR DISHED ENDS/END COVERS
T.C.NO.: DATE :
Name of the Part :
Maker's Name & Address :
Customer's Name & Address :
Drawing No. : Design Pressure (Kg./cm²) :
Process of Manufacture, Material Design Temp.(ºC) :
condition, chemical composition, Tensile :
Refer enclosed Raw material Heat Treatment :
Strength, Tolerances,
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 91
Bend Test, Flattening Test etc. Test Certificates or Form IV-A Hydraulic Test Pressure :
in lieu of Raw material Test
Certificates
Non-destructive Testing :
01 PLATE/FORGING
% Chemical Analysis CMnPSSi* other alloying Yield strength U.T.S. Elongation % Gauge Bend Test Name of the
elements (Kg/mm2) (Kg/mm2) Length inspecting
authority
10 11 12 13 14 15
15. Are you having Curriculum Vitae of all the inspectors/competent persons employed in the organization for
inspection and certification work?
16. Are you having a training programme for Inspectors/Competent persons?
If so, details thereof.
17. Are you prepared to conduct the work of Inspection of boilers, economisers and their accessories strictly in
conformity with the Indian Boiler Regulations, 1950?
18. Are you prepared to accept full responsibility for the certificate issued by you?
19. Has your request for recognition as an Inspecting Authority been rejected by any Authority? If so, please give
details.
20. Are you prepared to issue certificates for the products, you inspect, in the formats of the Indian Boiler
Regulations?
21. Are you aware that the recognition is for a period of five years only, which is renewable after every five years
on fresh assessment?
FORM XV-C
[See regulation 4A (2)]
QUESTIONNAIRE TO BE ANSWERED BY STEEL MAKER SEEKING RECOGNITION BY CENTRAL
BOILERS BOARD TO BE NOTIFIED AS “WELL KNOWN STEEL MAKERS”
1. Registered Name and address of the firm/company:
2. Works address:
3. The year in which the factory was established:
4. Capacity for production of steel:
5. Process of manufacture of steel:
6. Variety of steel products:
7. Range of steel produced in each variety:
8. Various national and international Standards to which the steel products are manufactured:
9. Testing facilities available within the works:
10. Types of tests conducted:
11. If so, by whom conducted:
12. Are the tests conducted by the firm/company acceptable to the other organisations of the country? If so, by
whom?
13. Is the firm/company prepared to conduct tests in accordance with the Indian Boiler Regulations, 1950?
14. Is the firm/company recognised as “Well Known Steel Maker” in any other country?
15. Whether the firm/company has any previous experience to produce steel in accordance with the provision of
Indian Boiler Regulations, 1950 under the inspection of any recognised Inspecting Authority.
If yes, details thereof.
16. Whether the firm/company is prepared to furnish certificates under the provision of Indian Boiler Regulations,
1950.
17. In case of renewal of recognition, had you manufactured and supplied steel as “Well Known Steel Maker” under
the Indian Boiler Regulations, 1950 during the last five years?
If yes, details thereof.
18. Whether the firm/company manufacture steel from the ore itself or from ore and scrap or scrap only:
19. Whether the firm is agreeable to show their manufacturing process and in-house testing facilities to a team
consisting of three members appointed by the Board.
20. Are you aware that the recognition is for a period of five years only which is renewable after every five years on
fresh assessment?
FORM XV-D
[See regulation 4A (2)]
QUESTIONNAIRE TO BE ANSWERED BY FOUNDRY/FORGE SEEKING RECOGNITION BY CENTRAL
BOILERS BOARD TO BE NOTIFIED AS “WELL KNOWN FOUNDRY/FORGE”
1. The registered name and address of the firm/company:
2. Works address:
3. The year in which the factory was established:
4. Capacity of the foundry/forge:
5. (i) Capacity for production of forgings/castings:
(ii) Maximum weight and size of forgings/castings:
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 95
13. Whether you have any previous experience of conducting tests in accordance with the provision of Indian
Boiler Regulations, 1950 under the inspection of any recognised Inspecting Authority.
If yes, details thereof.
14. In case of renewal of recognition, had you conducted tests under the provisions of Indian Boiler Regulations,
1950 during the last five years?
If yes, details thereof.
15. Are you agreeable to show your laborato and in-house facilities to a team consisting of three members
appointed by the Board?
16. Are you aware that the recognition is valid for a period of five years only, which is renewable for five years on
fresh assessment?.
FORM XVI-B
[See regulation 4C (2)]
NATIONAL EMBLEM
Serial No. File No.
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR COMPETENT AUTHORITY
This is to certify that the Examination of Welder System of:
M/s. _______________________
_______________________
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 99
_______________________
_______________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 4C(2) of the Indian
Boiler Regulations, 1950, as a COMPETENT AUTHORITY for operation in
_____________________________________ _____________________________
This certificate is valid for five years, i.e. upto………………………..
__________________________________________________________________
Validity is subject to the adherence to the quality Control prescribed under the provisions of the Indian Boiler
Regulations, 1950.
_________________
Date of Issue
Certificate No.___________
_________________
Secretary
FORM XVI-C
[See regulation 4C (2)]
NATIONAL EMBLEM
Serial No. File No.
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR WELL-KNOWN STEEL MAKER
This is to certify that the Inspection and Quality Management System of:
M/s. _________________________
_________________________
_________________________
_________________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 4C(2) of the Indian
Boiler Regulations, 1950, as WELL KNOWN STEEL MAKER, for the manufacture of __________________________
__________________________________________________________________
for their factory at________________________________
________________________________
_________________________________
_________________________________
This certificate is valid for five years, i.e. upto_______________________
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations, 1950.
_________________
Date of Issue
Certificate No.____________
__________________
Secretary
100 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
FORM XVI-D
[See regulation 4C (2)]
NATIONAL EMBLEM
Serial No. File No.
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR WELL-KNOWN FOUNDRY
This is to certify that the Inspection and Quality Management System of:
M/s. _______________________
_______________________
_______________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 4C (2) of the Indian
Boiler Regulations, 1950 as a WELL KNOWN FOUNDRY for the manufacture of
__________________________________________________________________
for their factory at________________________________
________________________________
_________________________________
_________________________________
This certificate is valid for five years, i.e. upto_______________________
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations, 1950.
_________________
Date of Issue
Approval Certificate No.____________
__________________
Secretary
FORM XVI-E
[See regulation 4C (2)]
NATIONAL EMBLEM
Serial No. File No.
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR WELL KNOWN FORGE
This is to certify that the Inspection and Quality Management System of:
M/s. __________________________
__________________________
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 101
__________________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 4C (2) of the Indian
Boiler Regulations, 1950 as a WELL KNOWN FORGE for the manufacture of
_________________________________________________________________
for their factory at _________________________________
________________________________
_________________________________
_________________________________
This certificate is valid for five years, i.e. upto_______________________
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations,1950.
__________________
Date of Issue
Certificate No.___________
______________
Secretary
FORM XVI-F
[See regulation 4C (2)]
NATIONAL EMBLEM
Serial No. File No.
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR WELL KNOWN TUBE MAKER
This is to certify that the Inspection and Quality Management System of:
M/s. __________________________
__________________________
__________________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 4C(2) of the Indian
Boiler Regulations, 1950, as a WELL KNOWN TUBE MAKER for the manufacture of Tubes of Sizes from
_______________________________ to ________________________________
__________________________________________________________________
for their factory at________________________________
________________________________
_________________________________
_________________________________
This certificate is valid for five years, i.e. upto_______________________
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations, 1950.
__________________
Date of Issue
Certificate No.___________
______________
Secretary
FORM XVI-G
[See regulation 4C (2)]
102 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
NATIONAL EMBLEM
Serial No. File No.
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR WELL KNOWN PIPE MAKER
This is to certify that the Inspection and Quality Management System of:
M/s. __________________________
__________________________
__________________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 4C(2) of the Indian
Boiler Regulations, 1950, as a WELL KNOWN PIPE MAKER for the manufacture of pipe of sizes from
_________________________________ to _______________________________
__________________________________________________________________
for their factory at ________________________________
________________________________
________________________________
________________________________
This certificate is valid for five years, i.e. upto_______________________
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations, 1950.
__________________
Date of Issue
Certificate No.___________
______________
Secretary
FORM XVI-H
[See regulation 4C (2)]
NATIONAL EMBLEM
Serial No. File No.
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL AS WELL-KNOWN MATERIAL
TESTING LABORATORY
This is to certify that after evaluation of the inspection and material testing system of the following laboratory,
the Central Boilers Board has granted recognition to it under sub-regulation (2) of regulation 4C of the Indian Boiler
Regulations, 1950, as a Well-known Material Testing Laboratory.
M/s. _________________________
_________________________
_________________________
__________________________________________________________________
This certificate is valid for five years, i.e. upto____________________
__________________________________________________________________
Note:— The recognition will be as per the standards specified under the provisions of the Indian Boiler Regulations,
1950.
__________________
Date of Issue
Certificate No.___________
______________
Secretary
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 103
FORM XVI-I
[See regulation 4C (2)]
NATIONAL EMBLEM
Serial No. File No.
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL AS WELL KNOWN REMNANT LIFE ASSESSMENT ORGANISATION
This is to certify that after evaluation of the inspection and material testing system of the following firm, the
Central Boilers Board has granted recognition to it under sub-regulation (2) of regulation 4C of the Indian Boiler
Regulations, 1950 as a Well Known Remnant Life Assessment Organisation.
M/s._____________________
_________________________
_________________________
__________________________
This certificate is valid for five years, i.e. upto____________
_______________
Date of Issue
Certificate No.____________
_______________
Secretary”.
44. In the said regulations, in Form XVII, for the heading “CERTIFICATE OF MANUFACTURE AND TEST FOR
SMALL INDUSTRIAL BOILERS”, the following heading “CERTIFICATE OF MANUFACTURE AND TEST
FOR SMALL INDUSTRIAL BOILERS INCLUDING SMALL INDUSTRIAL SOLAR BOILERS” shall be
substituted.
45. In the said regulations, for Form XVIII, the following form shall be substituted, namely:—
“FORM XVIII
[See regulation 392(4)]
QUESTIONNAIRE FORM FOR REPAIRER OF BOILERS/ECONOMISER/STEAM LINE/FEED WATER LINES
1. (a) Registered name of the firm and its permanent address ………………………………………………
(b) Address of the workshop:
2. Year of establishment ……………………………………………………………………………………..
……………………………………………
Date ………………… Name & Signature of the authorised signatory
Place ……………….. of the firm with stamp
Note 1: The recognition of the firm as a repairer shall be for a period of two years, thereafter they shall apply
for renewal of their recognition at least two months before the expiry of the said period.
Note 2: In case the repairer is found violating the provisions of the Act or Regulations knowingly or
unknowingly, the firm shall be blacklisted under intimation to Chief Inspectors or Directors of Boilers
of all the States/Union territories and renewal shall not be done in any case.”.
46. In the said regulations, for Form XIX, the following form shall be substituted, namely:—
“FORM XIX
[See regulation 376(ff) and 376(fff)]
Competent Person”.
47. In the said regulations, for Appendix JA, the following Appendix shall be substituted, namely:—
“APPENDIX JA
[See regulation 376(ff)]
A. Power Boilers working at a pressure above 100 kg/cm² and up to 100,000 hours of operations.
(1) The boilers working at a pressure above 100 kg/cm² and up to 100,000 hours of operations, generating steam for
power generation shall be inspected as detailed below after the expiry of twelve months from the date of inspection
carried out in accordance with the procedure provided in regulation 390 and certification of fitness shall be issued by the
concerned Competent Person in the State, through inspection of the following records which shall be made available
alongwith application in Form XIX duly filled in to the concerned Competent Person at least thirty days before the
expiry of the operating certificate, provided he is satisfied that the boiler can be allowed to be operated for a further
period of twelve months.
(a) Operation data for superheater and reheater temperature excursions from the output of Data Acquisition
System (DAS).
(b) History of shut downs during the previous year with their causes and actions taken.
(c) Records of any Non-Destructive test carried out on the boiler pressure parts during the year.
(d) Water quality to the boiler is maintained up to the requirement of such boilers and on line data of the
quality be provided.
(e) Boiler tube failure record (location, number of tubes repaired/replaced).
(2) Inspection shall be carried out by the concerned Competent Person at the expiry of twenty-four months as provided
in regulation 390. However, in case shutdown of fifteen days or more any time before expiry of the certification period
and after six months of the certification, the Competent Person shall be duly informed so that inspection can be
scheduled during the said shut down period.
B. Power boilers working at a pressure up to 100 kg/cm² and up to 100,000 hours of operations or 25 years of
operations as applicable.
(1) The boilers working at a pressure up to 100 kg/cm² and up to 100,000 hours of operations for boiler operating above
400ºC and 25 years of operation for boilers operating less than 400ºC generating steam for power generation shall at the
expiry of twelve months from the date of inspection carried out in accordance with the procedure provided in regulation
390 and certification of fitness by the concerned Competent Person in the State, and having satisfied with the operation
records at paragraph A, shall be allowed for running for another period of twelve months.
(2) Inspection shall be carried out by concerned Competent Person at the expiry of twenty-four months as provided in
regulation 390. However, in case of shutdown of fifteen days or more any time before expiry of the certification period
and after six months of the certification, Competent Person shall be duly informed so that inspection can be scheduled
during the said shut down period.
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 107
C. Power boilers working at a pressure above 100 kg/cm² and more than 100,000 hours of operations.
(1) Boiler working at a pressure above 100 kg/cm² and more than 100,000 hours of operations, generating steam for
power generation shall continue to be subject to inspection as provided in regulation 390 every year to the satisfaction
of concerned Competent Person in States. However, if Remnant Life Assessment (RLA), as per provisions in these
regulations is carried out on the boiler and if found satisfactory, then procedure as per paragraph “A” above shall be
applicable.
(2) Inspection shall be carried out by the concerned Competent Person at the expiry of twenty-four months as provided
in regulation 390. However, in case of shut down of fifteen days or more any time before expiry of the certification
period and after six months of the certification, Competent Person shall be duly informed so that inspection can be
scheduled during the said shut down period.
D. Power boilers working at a pressure up to 100 kg/cm2 and more than 100,000 hours of operations or twenty-
five years of operations as applicable.
(1) Boiler working at a pressure up to 100 kg/cm2 and more than 100,000 hours of operations for boiler operating above
400ºC and twenty-five years of operation for boilers operating less than 400ºC, shall continue to be subjected to
inspection every year as provided in regulation 390. However, if Remnant Life Assessment (RLA), as per provisions in
these regulations is carried out on the boiler and if found satisfactory, then procedure as per paragraph “B” above shall
be applicable.
(2) Inspection shall be carried out by the concerned Competent Person at the expiry of twenty-four months as provided
in regulation 390. However, in case of shut down of fifteen days or more any time before expiry of the certification
period and after six months of the certification, Competent Person shall be duly informed so that inspection can be
scheduled during the said shut down period.
Note: Wherever High Pressure (HP) and Low Pressure (LP) boilers operate from the same enclosure, the procedure for
inspection as applicable to High Pressure (HP) boiler shall also be applicable to Low Pressure (LP) boiler.”.
48. In the said regulations, for Appendix JB, the following Appendix shall be substituted, namely:—
“APPENDIX JB
[See regulation 376(fff)]
A. Waste Heat Boilers (Fired)/CO-boilers working at a pressure up to 50 Kgs./cm2 and up to twenty years of age
used exclusively in continuous process plant.
(1) For Waste Heat Boilers (Fired)/CO-boilers working at a pressure upto 50 Kgs/cm2 and up to twenty years of age
used exclusively in continuous process plant, at the expiry of twelve months and at twenty four months from the date of
inspection carried out in accordance with the procedure provided in regulation 390 and certification of fitness issued by
the concerned Competent Person in the State, and having satisfied with the operation records as given below received
alongwith application in Form XIX duly filled in shall be allowed for running for another period of twelve months:—
(a) Operation data for superheater and reheater temperatue excursions from the output of Data Acquisition
System (DAS);
(b) History of shut downs during the previous year with their causes and actions taken;
(c) Records of any Non-Destructive test carried out on the boiler pressure parts during the year;
(d) Water quality to the boiler is maintained as per the requirement of such boilers and on line data of the
quality be provided through Data Acquisition System (DAS);
(e) Boiler tube failure record (location, number of tubes repaired/replaced).
(2) Inspection shall be carried out by the concerned Competent Person at the expiry of thirty six months as provided in
regulation 390. However, in case of shutdown of fifteen days or more any time before expiry of the certification period
and after six months of the certification, Competent Person shall be duly informed so that inspection can be scheduled
during the said shutdown period.
B. Waste Heat Boilers (Unfired) working at a pressure up to 50 kgs./cm2 and up to twenty years of age used
exclusively in continuous process plant.
(1) For Waste Heat Boilers (Unfired) working at a pressure up to 50 kgs./cm2 and up to twenty years of age used
exclusively in continuous process plant, at the expiry of twenty four months from the date of inspection carried out in
accordance with the procedure provided in regulation 390 and certification of fitness by the concerned Competent
Person in the State, and having satisfied with the operation records at paragraph “A”, shall be allowed for running for
another period of twenty-four months.
108 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) Inspection shall be carried out by the concerned Competent Person at the expiry of forty-eight months as provided in
regulation 390. However, in case of shutdown of fifteen days or more any time before expiry of the certification period
and after six months of the certification, Competent Person shall be duly informed so that inspection can be scheduled
during the said shutdown period.
C. Waste Heat Boilers (Fire and Unfired)/CO-Boilers working at a pressure up to 50 Kgs./cm2 and more than
twenty years of age used exclusively in continuous process plant.
Boiler working at a pressure up to 50 Kgs/cm2 and more than twenty years of age shall continue to be subjected to
inspection as provided in regulation 390 every year to the satisfaction of concerned Competent Person in the State.
However, if Remnant Life Assessment (RLA) as per the provisions of these regulations is carried out on the boiler and if
found satisfactory, then procedure as given at paragraph 'A' or paragraph 'B' above as applicable shall be followed.
D. Captive Boilers/Waste Heat Boilers (Fired)/HRSGs working at a pressure more than 50 kgs./cm2 and up to
twenty years of age used exclusively in continuous process plant.
(1) The Captive Boilers/Waste Heat Boilers (Fired)/HRSGs working at a pressure 50 Kgs./cm2 or more and up to twenty
years of age, used exclusively in continuous process plant shall be inspected as detailed below after the expiry of twelve
months and at twenty four months from the date of inspection carried out in accordance with the procedure provided in
regulation 390 and certification of fitness shall be issued by the concerned Competent Person in State, through
inspection of the following records which shall be made available alongwith application in Form XIX duly filled in to
the Competent Person at least thirty days before the expiry of the operating certificate, provided he is satisfied that the
boiler can be allowed to be operated for a further period of twelve months:
(a) Operation data for superheater and reheater temperature excursions from the output of Data Acquisition
System (DAS);
(b) history of shut-downs during the previous year with their causes and actions taken;
(c) records of any Non-Destructive test carried out on the boiler pressure parts during the year;
(d) water quality to the boiler is maintained up to the requirement of such boilers and on line data of the
quality be provided through Data Acquisition System (DAS);
(e) boiler tube failure record (location, number of tubes repaired/replaced).
(2) Inspection shall be carried out by the Competent Person at the expiry of thirty six months as provided in regulation
390. However, in case shutdown of fifteen days or more any time before expiry of the certification period and after six
months of the certification, the Competent Person shall be duly informed so that complete inspection can be scheduled
during the said shut-down period.
E. Captive Boilers/Waste Heat Boilers (Fired)/HRSGs working at a pressure more than 50 kgs./cm2 and more
than twenty years of age used exclusively in continuous process plant.
Boiler working at a pressure of more than 50 kg./cm2 and more than twenty years of age shall continue to be subjected
to inspection as provided in regulation 390 every year to the satisfaction of concerned Competent Person in State.
However, if Remnant Life Assessment (RLA) as per the provisions of these regulations is carried out on the boiler and if
found satisfactory, then procedure as given at paragraph 'D' above would be applicable.”.
[F. No. 6(4)/2014-Boilers]
T. S. G. NARAYANNEN, Secretary, Central Boilers Board
Note:—The principal regulations were published in the Gazette of India, vide, number S.O. 600, dated the 15th day of
September, 1950 and last amended vide G.S.R. 8, dated the 17th January, 2014.
Printed by the Manager, Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.